I'm a teacher at our Technical High School & I teach the metal shop classes and technical engineering classes & this was very interesting to watch & enjoyed it very much!! I've been a metal shop teacher and technical engineering teacher since 1984 & this will be my last year of teaching both classes and my over the years I received many calls from my students that I have taught & their congratulating me for teaching them and 20 of my students went to Lehigh University and received their Technical Engineering and now work for several companies that need technical engineers and they have done well!! Some of them are working for numerous military bases in the United States & very proud of them for their success and now looking for a long time retirement, and to all my former students out there... THANK YOU!! 🤝🏻👍🏻
absolutely a beautiful project! I missed these creative videos of yours !!!! I can't wait to see part 2! thanks for the entertainment and good luck !!!!
The motor was fine it just needs a new carb diaphragm since the Briggs carb are complete garbage. I usually tare the motor down and refine it then adapt an old tecumseh or kohler carb in place of that Briggs garbage. I sell em to a couple of guys that build racing mowers for their kids
Doctor, was this a push lawnmower? How can you run this engine on it's side without affecting the engine lubrication? Can you also explain how you attached the chain to the engine shaft, is there a clutch attached?
Pretty nice cart.I'd move the axle back as far as possible before painting though.It wheelies way too easy,and you want some more stability.It looks really fun as is though.Kudos! / Prilično lijepa kolica. Ipak bih pomaknuo osovinu što je više moguće unazad prije bojanja. Prelako se vrti na kotačima, a želite malo više stabilnosti. Iako izgleda stvarno zabavno ovako. Svaka čast!
Just keep an eye on the areas where you welded to the old deck for cracks. Those cheap mowers were cheap for a reason and the worst materials were part of it. More often they were made from the steel that didn't make the test for oil pans and such for cars. Don't want our new car with 15k miles having the pan split on a bend and go boom. Warranty time. So let's use the questionable steel for cheap mower decks instead. Also have you noticed that oil pans and valve covers are stamped and not welded? That steel has to conform around compound curves. It is soft to do so but work hardens in the process to keep it's shape. That same alloy just doesn't take to welding well. It's going to crack out just outside of the weld. Beware. I have repaired many mowers and decks from riders and these throw away push mowers aren't worth your time fixing. Better yet make a go cart out of it. You don't have that blade spinning to cause bodily harm this way. The best use yet for one of these old mowers. It will probably do the go-kart way better than it ever mowed the grass. Be safe. Cheers Terry from South Carolina USA
I thought the purpose was to cut the lawn total waste of 20 min I built a go cart when I was 15 and it was better looking why put the mower parts on it you cut up a good go cart to start with if it wasn't going to be a mower.
PART 2 : ua-cam.com/video/ijGfZztbbJw/v-deo.html
E imam ideo z odluci par tvoji videozapisa mozes li kupit neispravni i osteceni Fiat 126 p i napraviti restauraciju
Hvala
I'm a teacher at our Technical High School & I teach the metal shop classes and technical engineering classes & this was very interesting to watch & enjoyed it very much!!
I've been a metal shop teacher and technical engineering teacher since 1984 & this will be my last year of teaching both classes and my over the years I received many calls from my students that I have taught & their congratulating me for teaching them and 20 of my students went to Lehigh University and received their Technical Engineering and now work for several companies that need technical engineers and they have done well!!
Some of them are working for numerous military bases in the United States & very proud of them for their success and now looking for a long time retirement, and to all my former students out there... THANK YOU!! 🤝🏻👍🏻
A broken lawn mower + an old go kart + your job = really really cool vehicle, i can't wait to see the next part ;-) !
Najbolji start (17:50) 🤣🤣...napravi wheelie bar iza i vozi na zadnjim kotacima, eto ideje za iduci video hahahhah
absolutely a beautiful project! I missed these creative videos of yours !!!! I can't wait to see part 2! thanks for the entertainment and good luck !!!!
I would love to have seen you put a lawn mower engine on a go cart frame.
Cool👍👍
you need a sand blaster and 3d printer for sure
Za ovakve stvari treba da se koristi glava, svaka čast !
The motor was fine it just needs a new carb diaphragm since the Briggs carb are complete garbage. I usually tare the motor down and refine it then adapt an old tecumseh or kohler carb in place of that Briggs garbage. I sell em to a couple of guys that build racing mowers for their kids
I'm waiting for BMW 😎
Same Here 😂
Gool 🔥🔥🔥
Um abraço amigo, adoro suas invenções!!
make it 4x4 next time lol, great job overall!
Nice 👍
Sad ti pokosi travu sa tim sr....em...
Dad: son, you goober.... Now go mow the lawn!
Son:...... One more donut?
Dad: only if I can do one too....
Good my friend I'm happy to watching your videos thank you
Good modifikasi go-kart.
Jedini čovek koji je napravio tenk u dvorištu
❤
Cool well done
Great videos!!! 😂
Thanks for sharing 👍😀
It's like watching Junkyard Wars, the show with the curiously well-stocked yard of parts for the project of the day...
i have a Wolf Garden Cart you can't beat that.
Ok so what you did is basically you destroyed a factory made shifter cart to create something much less rideable? Good job then...
I’ve done worse , and this thing is way more fun than a kart .
isnt the brembo brakes just a bit overkill on this 5mph death trap? xDDDD
Doctor, was this a push lawnmower?
How can you run this engine on it's side without affecting the engine lubrication?
Can you also explain how you attached the chain to the engine shaft, is there a clutch attached?
are you blind?
build a gokart with another gokart 😂
Great job !
You are one crazy dude haha
Pozdrav!
Gostei, muito criativo 👏👏👏👏👏
clean the carb, it'll start, it be better to combine the go cart with the push mower to make a riding lawn mower.
🤘🤘🤘🤘bello da paura🤙🤙🤙🤙
beautiful project
Tt
Great!!👍👍
Hữu ích 🥰👍👍👍
Homie why you got a helmet on 🤣🤣
Pretty nice cart.I'd move the axle back as far as possible before painting though.It wheelies way too easy,and you want some more stability.It looks really fun as is though.Kudos! /
Prilično lijepa kolica. Ipak bih pomaknuo osovinu što je više moguće unazad prije bojanja. Prelako se vrti na kotačima, a želite malo više stabilnosti. Iako izgleda stvarno zabavno ovako. Svaka čast!
👍👍👍👍
Where can I buy one ,have the puch landmower and can't puch ,70 years old.
You just happen to have all those materials laying around huh?
E Dali bi ti htio prodati nestao od svojih radova kao npr. Karting kosilica plz..odgovory
Da/ne,?
BMW pick up? 😔
Be better if it mowed the grass
Izvini ali mislim da je bolje da si uzeo Poljostroj motokultivator kosačicu
Just keep an eye on the areas where you welded to the old deck for cracks. Those cheap mowers were cheap for a reason and the worst materials were part of it. More often they were made from the steel that didn't make the test for oil pans and such for cars. Don't want our new car with 15k miles having the pan split on a bend and go boom. Warranty time. So let's use the questionable steel for cheap mower decks instead.
Also have you noticed that oil pans and valve covers are stamped and not welded? That steel has to conform around compound curves. It is soft to do so but work hardens in the process to keep it's shape. That same alloy just doesn't take to welding well. It's going to crack out just outside of the weld. Beware.
I have repaired many mowers and decks from riders and these throw away push mowers aren't worth your time fixing. Better yet make a go cart out of it. You don't have that blade spinning to cause bodily harm this way.
The best use yet for one of these old mowers. It will probably do the go-kart way better than it ever mowed the grass.
Be safe.
Cheers
Terry from South Carolina USA
Molto bello ...perché non fai un tosaerba con il radiocomando...tagli l erba stando seduto in panchina...
Jajajaja
and who is cutting the gras now?? :D :D
It's alignware it's supposed to cut grass and it aint cutting grass so are you there was make a goat cart
I thought the purpose was to cut the lawn total waste of 20 min I built a go cart when I was 15 and it was better looking why put the mower parts on it you cut up a good go cart to start with if it wasn't going to be a mower.
where is bmw pick up?
Will it mow ?
Congratulations, it's another engine.
Excellent. I also do exciting things on my channel👏
Would you sell it and how much and where are you from
I"am happy
El centro de gravedad muy atras es peligroso.
So perfekt
You can turn right
Ok yes bmw pick up bro?
Норм пацан рулит
Я думал он сделает газонокосилку а он сделал ерунду.
Napravi prikolicu na 4 tocka, kao sto su prave samo manju za traktor kosilicu da ima rudo i šestar
mario kart next?
Lmao clickbait videos belike: 434 year old lawnmower restoration🤣
waouh
BMW truck?
Hi
Where do you get all these motors from?
Care Staje sa BMW Projektom
Je to na prodej?
sranda stim muže být asi dobrá :D ale ten prodej by se asi trošku prodražil :D
link please for the brembo brake master? tha
14 کامنت
šteta lopate hehe
no entendi.....ya cortaba el cesped ,y sin cables....para que la transformacion...????
Man, that thing looks ugly a f. 😅
Вместо задних колес наждачные круги и отличная приспособа полы шлифовать!
👍👍👍👍👍
👍👍👍
👍👍👍👍👍