Homemade 50cc Trimmer SKATEBOARD !?
Вставка
- Опубліковано 8 кві 2022
- Homemade TRIMMER DRILL !?
• Homemade TRIMMER DRILL !?
.
Kožul (Max Tools) : www.kozul.hr/
.
Einhell: www.einhell.hr/
.
Unior Tools: www.unior.com/
.
My INSTAGRAM: / doctor_ds_youtube
.
.
.
Photo equipment
-SONY A7III
-SONY 18-70
-SONY 18-200
-2x Nikon d3200
-Nikor 18-55
-DJI Ronin SC
-RODE
-RODE NT-USB
-GoPro 7 silver
.
Za poslovne upite: dadoskrbo16@gmail.com
For business inquiries : dadoskrbo16@gmail.com - Авто та транспорт
I see a bunch of comments about turning the engine and other options to get it to run the right way, but a simpler solution is what we do with machine belts. Just make the chain into a figure 8. turns the other way and super easy. You might need a guard, but it works.
Hi brother
If you turned the engine 180 degrees with the sprocket to the right, the problem would be solved.
I love how you have beautiful edits of you cutting and tooling, and I love that you left in your mistake, instead of editing it out. Respect.
I like the way you made the front axle and wheels ect.and bushing..
Bolje, jos malo i na starim stazama slave si, imas like
yes, like Harry Burford just said, turn the rear wheel around so the sprocket is on the other side, and turn the engine around too so the sprocket is on the "right" side of the board.
Came to say the same thing
Всё классно👍! И новые инструменты супер. Следующий проект сделай переднеприводный двух колёсный самокат. И протестируйте его в лесу по бездорожью. 🤏✌👍. На таких колёсах должно быть супер!
That clutch is meant to put the engine facing the other way, since the engine turns counter clockwise the gear box makes it go the other way, so the engine goes mounted with the carb facing forward
Hahaha dobro prevozno vozilo samo nemoj jako stiskati kočnicu da nebu bilo red bull daje ti krila
If you look up a pivot cup on skateboard trucks it will help you tremendously
Where you attach the front axle like a skateboard truck
On an actual board there is a little cup there so your board does not sway back and forth so hard
Doing this with let you achieve full speed more safely and harder for you to turn by shifting your weight forward and back
Odličan waw tako da se spasite iscrpljujuće šetnje od svog doma do svoje radionice ili gdje god želite ići, dobra alternativa
AUSOME!!!!!! Good job!💪💪💪
svaka čast majstore, jednostavno smišljeno, posebno skretanje, a funkcionira
It look more fancy with one wheel in front💯
Nice job . Made with the plans in your head. Imagination.
Could you do a build for a motorised wheelbarrow . If you do one that can be sold in a kit then you will probably make a few million bucks.
Cheers .😎
Hey dr ds, since we are your loyal fans from all over the world....how about you pay homage by signing our country's names on your builds....your loya fan from Kenya 🇰🇪
Am also a fan from KENYA 🇰🇪🇰🇪
an excellent job, well done, yes, I would add something very small, 2 lills to the legs or two irons so that it does not fall for balance
٠😃😃
Radical rig. My favorite part is the doctor coat.
Hey, try to switch the engine pozition, and the brake disc tot make it run in the opoziție direction
Svaka čast majstore!
Sve pohvale...
Bravo!
Kad vidiš kako drugi rade slične projekte tačno se vidi da je ovaj s Balkana.
Congratulations, young man. You are a very intelligent person. Between the ideas, workmanship, mistakes, and last but not least by your sense of humour shown in picking up subtle and tacit moves with the photography and the instant timing at which you depict it in order to accent your determination, as for example at 20:12.
Well done and all the best.
Great job.. the only thing that you have to do is turn the engine around and wheel and sprocket and it will be in the rear... 😁
It's very nice that you have been working
Ya need to turn your motor around so you steer with 2 wheels. More stable and no exhaust in yo face. Like your stuff brother and I love that you don't talk. Keep up the good work 💯
rear wheel steering is where board wobble comes from. get that motor spun round and ride it like you intended. also go with a decent plywood and you can cut that deck thicknes down by 75%. weight is not your friend
flip the motor, sprocket on the other side, reverse direction
Nice little Fardier de Cugnot
Dr. Mad Max mini! Nicht schlecht!
Wow, it turn so nicely. Its a shame we didn't see it in the video.
I think it's better with the single wheel in the front. But all you would have to do is turn the engine and drive sprocket 180degrees to the other side of the skate
this looks like a lot of fun! i built something similar. you will want the engine mounted to a 'plate' separate from the frame. Then slotted holes in the plate front to rear. Then you can fine-tune the chain adjustment. & perhaps turn the engine & wheel around to the other side so it goes forward & it will be more stable. good luck! liked & already subscribed
Super ideja i posao🙂
Buen video.
No basta con saber.
También hay que tener las herramientas y la platica.
brate, svaka ti čast!
Grande Doc!!!
Odlično, svaka ti čast!! 👏👏👏👏
Ajme ,Kralj 😂❤️🔥👍👏
Turm motor and sprocket on the opposite side and it will work just fine
you have to try to start the engine from the opposite direction so that he can go forward
very nice , you know you should think about putting epoxey resien on it with some cool design
ok so love the concept except the backwards part...also alil wobbly so could you make me one the right way and what would you charge??
Odličan projekt svaka čast samo naprijed
Great job dear friend wish you all the best❤
Buenas noches Bro solo jira el motor y cambia el disco de freno acia donde esta la estrella de transmisión para que ande como tu querías de principio
I owned one just like this 49cc 2stroke it was fun going uphill in the mean streets of Wellington.. All the power was one ine wheel and made for mad speed wobbles when i let off the gas... Ended up going into the back of a parked van and broke my shoulder. While i wasnt using in crackheads stole it....
Have you considered putting a handle on it. It would connect your upper body, like on a Segway.
Just a thought, fun content!
Hola bacán me encantó tu mono ciclo sólo para que te camine al derecho sólo borra el motor hacia el otro lado
Da je malo Jace pa aj🛠️⚒️💪👌👍
WOW!
Great odlican projekat
Cool build man
I'm not sure the gearing is right... most of the time, you can hear the engine is 4-stroking and running at a pretty low RPM, meaning the clutch is probably slipping. and hasn't fully engaged. I think you could get better performance by choosing a smaller sprocket on the engine side! Great project nonetheless! :)
Nice project!
Big fan from Poland 😁
as always, brilliant
Gordon from Ireland
SVAKA CAST EXELEND WTF SUPERRRRRR
Svaka čast.
Dobro je ispalo 🍻
Svaka čast odličan video samo ti predlažem da složiš neko sjedalo da ti bude lakše vozit
to onda nebi bio skejtbord već neš drugo
to onda nebi bio skejtbord već neš drugo
Congratulations for the 2 million followers you deserve more if God wills for the 10 million
I would put a handle on it for better stability and a place to mount the gas and break leavers
Very heard work great 👍
2:05 I would put in fresh fuel because it gets unmixed and can cause a piston seizure
why cant you just turn the engine 180degrees, and also the wheel.. ?..
Cestitam na dva miliona pratilaca
Мастеря скейт ,не забудьте построить туалет и будку для енота...😮😢😮
Awesome !!
Lux robota
Gool 🔥🔥🔥
To jest bardzo dobra robota
Crazy Idea
Sve pohvale🏅👍👏👏👏👏👏
So perfekt
Happy 2m
You dont make small gearbox for front drive?
I would ride it, couldn't you just flip the motor around same as the rear and bolt it back up?
It's still a lot cooler than an electric scooter 👍
should clean your metal a little more on the edges. mig really likes clean metal.
Okreni motor i vucni tocak za 180° i ici ce u drugom smeru. Samo moras prepraviti nosace motora i kocionih klesta
there is a huge diy electric skateboard community. i built a 35mph board with 25 miles of range. you should try it.
great job! and thanks for not playing jungle music
Salut 👍✌🏻😎✌🏻🇫🇷🇧🇷 Cool 👍
esto me sorprende, 😱 me imagino una silla de ruedas con motor a gasolina
Svaka cast
nice you think i can do it with chainsaw engine ? has 18.000 rpm i think dont know how mutch cc
Go pro kosy 😁
Use an Extra Gear? Wind the pull cord in the opposite direction, or use a drill to start it? I heard this works on two-stroke motors, but I haven't tested it. I think it is probably easier to steer "backwards": I can ride a tricycle, but I cannot ride a skateboard.
it does because the motor / engine can run either way
Yio dude just turn the motor around and flip the wheel to the other side voila
Why didnt you just turn the engine and rear wheel 180 degrees?
Fajny film!!!!!!!!!!
👏👏👏👨🏭
Muito bom...
Genius.
Good
Thanks
amigo.beauiful shots- catch you later.
That turn radius must be a mile
You need some no skid tape on the top of the board
next project flip the engine 180 so you have 2 wheels in front