Zetec OR Duratec? I wish I had known the difference before I started. Which one should YOU buy?
Вставка
- Опубліковано 19 тра 2024
- Ive bought an engine from a mondeo but its it the wrong mondeo so whats the correct mondeo for the job and why is this engine wrong?
Alice is my Mk1 ford fiesta that i have as a project car.
follow me and see the progress. i will be giving helpfull hints and tips along the way allowing you to attempt some of these jobs yourself.
If you would like to donate to help my channel grow please click the link below..
gofund.me/70d04e5e
Timestamps
00:00 Sourcing the new engine
00:51 Removing the engine from the donor car
02:33 Unloading and fitting the gearbox
02:59 Realising my mistake
03:30 The Duratec and why it's not right
08:51 Bring in the Zetec
09:35 The problems with the new engine
#fiesta #ford #zetec #conversion #engineswap #diy #carsofyoutube #mondeo #duratec #mk1fiesta #fordfiesta - Авто та транспорт
The st150 uses a fiesta gearbox it's not the original mk1-5 chassis but it's a 5 speed and smaller
Top work on this Mike. Learned a few things
Thank you. Glad it came of some use to you 😊
Great job getting an engine I am sure you will be able to make it work
im sure of it too. just need a pile of cash and more hours per day :-D
Don't we all
but a change of engine will make it easier hope your luck changes and gets you back on track no failures only success to come
Thanks. 😊
The Mazda version is arguably better than the Duratec, Ford cheaped out on the bottom end components, namely the pistons and rods, to get 300bhp from the Duratec takes a lot of work, not so much with the MZR.
As you may know I’ve fitted the st170 engine and 6 speed box in mine… they’re a very similar engine, I’ve tried to be as detailed as I can in my insta with how I’ve overcome a few problems.. too many to list here! 😉 keep up the good work.. there’ll be many more obstacles!
Do you have a link to your Ig?
@@mike_themechanicis my fathers 1.6 duratec a mazda engine, or a yamaha codeveloped engine
@@mike_themechaniccuz my dad used to own a 1.6 zetec
I think all duratec engines were mazda. Zetec was ford made.
@@mike_themechanic it still sounds almost the same to me.
Eccentric timing belt tensioner from a nissan VG33 SOHC. I cut the standoff down 12mm and now have a proper eccentric timing belt tensioner
Nice hack 👍👍
Old Fords are like a LEGO set! Every engine will fit every gearbox and drive shaft.
The Mk2 Mondeo in 1998 still has either Silver or Blacktop but all the bolt patterns are the same for RWD or FWD
I built a ZVH turbo engine (1.8 zetec bottom end with CVH head) and all patterns are the same.
When the Duratec came out they used Mazda engines and gearboxes.
But when the Zetec SE came out (Yamaha engine) they used the old RWD T9 pattern!
Never thought of it like a lego set before 😂😂😂
@@mike_themechanic If you're into a Mk1/2 Fiesta with a Mondeo engine you should know LOL
Even the old 1.3 crossflow engine has the same bolt pattern.
@cossiemk2 well it is the first time I've done this kind of swop so it's been a voyage of discovery 😂.
Originally i thought it was an easy task just an engine and a gearbox bolt them together and that's it done but then I found out about the baffel plate, the driveshafts, the brake servo, injection system, fuel tank etc etc
@@cossiemk2 never even considered that 😂😂😂😂
These duratec is also used in volvo v50 c30 2003-2012 front wheel drive with 5 speed MTX75.
True.
In the US, every Duratec powered Focus with a manual transmission has the MTX75. They are pretty easy to find. The 5 and 6 speed transmissions from the Mazda 3 also bolt up.
They did a mk3 Mondeo with Mazda derived Duratec engine and 5spd gearbox. I have one. 2005 2.0i "Zetec" (not to confuse things further, Zetec being a trim level on the mk3!!).
I think most mk3 mondeos were duratec mazda engines.
I have a 1.8 Duratec petrol Mondeo. 5 speed manual. MTX75.
2006 Ford duratec 3.0 165,000 miles so far.
Duratech are mad in old escorts wid alot of money thrown at it wid quad throttle bodies sound awesome
Quad throttle bodies are awesome
My Volvo C30 has a Ford/Mazda Duratec 2.0 engine and a 5 speed gearbox.... and its Swedish.
I have a 1.8 Duratec petrol Mondeo. 5 speed manual. MTX75.
That's probably the same engine as in my video with the black top rocker cover
@@mike_themechanic yes. It looks the same. Mines on 144,000 and still runs like a top (de-flapped at 77,000). Fresh 5w30 every 10,000
@@steve0680657 it is possible to fit in to a fiesta but it's not as "straight forward" as the one I've done.
@@mike_themechanic The st150 gearbox is an option.
Probably. Anything will fit it just needs more fabrication work to fit it.
Sold the engine yet? Could use it for mycket escort mk2. Any wiring, manifolds etc included?
Still have it. Inlet manifold is included. No wiring unfortunately
@@mike_themechanic Thanks for your answer. I am thinking about using the engine stock including injection and everything so I would need the loom, keyfob, instrument cluster. I suppose I should try to get a complete scrap car. What is your plan to get the fiesta through Swedish mot/besiktning? Keep up the good work.
That was my plan from the beginning but it's alot more work than I was planning on. I've gone with an ecu from Motorsport electronics and a set of bike carbs so it's only 3 additional wires to the loom plug and play for the rest.
@@mike_themechanic I just watched a UA-cam video about the duratech and realized that my plan is not possible. The intake manifold is not going to work in a rwd escort and since its made from plastic its not possible to work on. I will have to rethink this. Getting scrap engines etc in the uk is much cheaper than in sweden as im sure you know but i could still use/modify the standard exhaust manifold. I suppose it could be possible to build an inlet as long as i use the thottlebody...
There are people in the UK that build rwd escorts but I'm not sure which engine they use. I got my engine from a scrap yard in Sweden but it didn't come with everything so its took me time to find all the extra parts I need to fit it in. I would have liked an st170 but they are crazy priced in Sweden and its only the head that different to the engine I already have.
Are the 'black top' engines cast aluminium or engineering plastic?
Biggest problem I have with Ford is they use the same name for vastly different engines (guess that's the problem you found as well?)
I've got a 2004 Mazda B2300 but no idea what actual engine is in it, I know it's Ford and maybe Ztec?
If I was still in Britain it wouldn't be a problem as I knew several people working at the Bridgend Engine plant (but I think that's also been closed down now?)
They are cast iron blocks with alu cylinder heads.
@@mike_themechanic Sorry, I should have been more specific, I meant the cam covers
The black tops are plastic and the silver tops are aluminium but the silver top does fit on the black top.
@@mike_themechanic That's good to know, 'plastic' seems to distort and leak oil into spark plug recess. I've worked on motorcycles about 50 years and never liked engineered plastics on engines, even alloy on the Honda 750/900 (and various Kawasaki's, Yamaha's and Suzuki's) allowed leaks around plugs when the seals were not in right or age hardened.
@1crazypj I've replaced my plastic one with an aluminium one I think it looks better as it could be painted as well
Ib5 out of an st150, bolts straight together.
Any of the ib5 gearboxes bolt straight to the zetec engine
This is the confusion - the st150 is definitely duratec 2.0 and definitely ib5... I wonder if there are multiple variations of the duratec blocks with different bell housing bolts no one talks about...
@@branney6914 Highly unlikely. The transmission just has a different bell housing to fit the other engine. This is very common.
No offence but your out of your depth a bit here, it’s a Ford engine mazda adapted.
Mtx75 box fits, fiesta st150 ib5+ box fits, focus mk2 2.0 duratec box fits. Any box with a bell housing adapter plate for £2-300 quid
A bit more homework would have saved you a lot of hassle.
I’m no mechanic but know these things.
Duratec 1.8 2.0 2.3 2.5 Ford engine 2.5 has vvt
Mazda 1.8 2.0 2.3 have also got vvt.
A lot of internal differences/ dipstick location inlets etc.
Major thing you should have checked.
Duratec has a chain
Zetec has a belt
Hope this helps a bit to someone
Been there done that I'm afraid
We live and learn 😂😂
The zetec is better engine the duratecs drink oil and been known to knock bottom.end out I have seen zetecs with over 200000 miles and still running well the fiesta st 150 uses the 2.0 litre Duratec engine and uses a 5 speed box
My 2012 Fiesta has a 1.25 duratec engine, its a normal port injection engine and it has never lost one single drip of oil an i'm at 212000 kms now :D
@@LikaPyramid different engine
@@MegaReddevil71 what do you mean? Different than what?
@@LikaPyramid he's comparing the 1.8 and 2.0 zetec to the 1.8 and 2.0 duratec your engine is completely different
ah okay