Відео

Mike..hope you can help me...completely forgotten how to see whether its on AC or DC? Is light on mean AC? used it for aluminium a lot many years ago...no problems- no complaints.

How much on average would you expect to pay to change master cylinder

Mk2 fiesta you can remove fan from behind bonnet latch panel in engine bay!

Ford used 2 different types of heater motor, the bosch one you have only works with your heater box, with the red tops and that white cage. the other type you can't change the motor on annoyingly.

I thought I heard a tapping sound Mike 😄, just kidding, the new motor sounds great.

Where did you get the torque settings from? I've been told it's 20nm for clutch!

Som vanligt intressant video, längtar redan nu till vi får se din resa 😁

Move to England

I had the silver top zetec in my MK1 and with that you could stick a 1.8 head on the 2.0 block and fit the RS turbo steel head gasket which was 0.7mm instead of the standard 2.0mm so with both you got a nice compression raise with out having to skim the block, if it came you it you could still safely take 20-30 thou off it even with high lift cams fitted. Not sure about the black top but all your problems sound tappety / clearance related so a new head would probably sort it if you can't sort out the one you already have.

Blimey serious stuff Mike but a worth while job bid say car sounds sweet now and ready for the road 👍

I would get the shims mate to fix the tapping noise

Does grinding back welds using flap wheels create more heat than say croc sanders?

I'd only cut off what i needed too for the same reasons. I don't know what size steel car panels are. Has to be less than 1mm

Nice job

Good job! Mister💪✊🇩🇪🇷🇺. Danke и большое спасибо.

Nothing better than cars and a good old rock playlist !

Looks like you had a blast 💥 I can respect 🫡 this 😜

Fantastisk Bil- och Rock-festival !! Önskar att jag hade kunnat vara där... Ser fram mot samma tid och samma plats 2025 !!!! 😎🎸🎹🛻

Hej Mike

Å där kom äntligen min bil med på film 😁👍

Hallå du äger ju husset min mamma och pappa har hyra dit hus du kan pratta svenska 😂😂😂😂😂😂😂😂😂😂😂😂😂😂

Najs mate!

Music ?!

Do you know if it's possible to remove clutch bracket from clutch master cylinder without removing fluid lines, need to do thist so I can get to blower motor to press tab and turn motor to replace it. I have been trying to remove blower motor for weeks, driving me insane, have come to the realization that I will need to remove clutch bracket to give me room but don't want to disconnect brake fluid lines, any idea?

Hej vad heter detta på svenska? Och hur beskriver man detta till sin mekaniker?

8:28 the rev counter isn’t moving when the engine is turning over. I suspect you’ve got a duff crank sensor bro.

I’d love one of these, just cos of how easy they are to work on if nothing else.

You can prime fuel filter on these cars by presseing and holding start button 6 times, but don't press clutch to inhibit engine starting. You will ear fuel pump working. After that, start the engine and keep it steady at 2krpm for 1 minute, wile remaining air gets out through return line.

3:22

Buonasera ho bisogno di un piccolo aiuto sto montando volano kit completo ftizione ho notato che nel volano bimassa ce una tacca scavata a mezza luna per caso bisogna metterlo in fase anche il volano con il resto del motore grazie a chi da risposta

I need to ruber part nummber you have it? The one what gets lost easily

Float is full of fuel...

Before you do enything on tank, take instrument panel out and measure how mutch ohms you have. mk2 Fiestas have some issues on their fuel and tempperature gaudes, maeby Mk1 allso.

Could it be that it’s a Mk2 fuel sender but Mk1 gauge and they’re working on different ohms? IDK? Greta video.👍

Same problem, did you solve it?

Mine has done 310 000km original clutch with no problem. Now I have a noise in the gearbox. Ive set it down to eighter A: outgoing bearing on gearbox or B: flywheel. Im taking it out soon. Thx for the video!

Hiya Mike great videos very clearly understood, might i ask a question ? My current daily commute is a ford focus mk3 tdci navigator 2014, milage very low 43 k to be precise , now coming up to its 10 years birthday 🎂 would you recommend changing the timing belt and w/pump ? Appreciate your advice , cheers owen

Looks fantastic. Ive read it’s a pig of a job to fit. Well done to Mrs The Mechanic 👍

Fantastisk timing på innehåll då jag måste byta framruta på min ena mk1, rutan har jag men har aldrig bytt en ruta förr men det ser inte allt för svårt ut.... så blir nog att ta hjälp av frugan till helgen och fixa det. Va in i går och besiktade den, första besiktningen på 15 år så jag räknade med att få en lång lista på saker att fixa. 2 nerslag att fixa, sprucken framruta som jag viste om och så en bakbroms som inte alls fungerade så den misstänker jag att det är en hjulbromscylinder som gett upp för handbromsen funka fint. Rätt otroligt att en bil står 15 år och nästan rullar rätt genom utan en totalrenovering :) Är bra kvalité i dom små bilarna ändå....

To get the rear qtr glass out I just used to lie on the back seat and push it out with my feet, you just apply even pressure near the top and it just pops out, have a mate outside to catch it just in case it comes out too easily.

Great job, nicely done. I had a dirty cig smoke stained roof header cloth when I bought my last MK1 Fiesta but since it was intact and I never had the confidence to replace it I just ended up leaving it in place and spray painting it with a can of vinyl paint and it came out looking brand new.

Another detail not in the video is the correct amount of new gearbox oil. Its really weird on the manual 6 gear since you have to fill it up until it leaks out and then suck out like 100ml which is effectively wasting good new oil.

Pro tip, you can upgrade the lower engine rubber mount for the more sturdy version from ford focus electric. The acceleration feels much better. I did this on my 1.5tdci 4 years ago and it feels like a much better car.

Hello, I saw that your content quality and Thumbnail is also good. But, your channel is not Growing. Then, I analyzed and I saw that in your channel have some problems. That's why your channel is not growing. Mainly, you are not reaching to your targeted peoples, If you can solve these problems your channel will grow like a storm. Your video is not reaching to targeted peoples, If you can solve, will reach, you can earn money., Can I tell these problems? Can I tell here? Are you allow? And how are you?

I love what you're doing. You go to a lot of car meets. There are a lot of top-notch cars here in Northern Sweden. Have you considered asking people if they would like to show their car on your channel. Maybe go for a ride in it. Seems to go down well on youtube viewers. Motor addicts. Living life large. Simply gased. Same examples that do it. Be nice to see same top swedish cars being shown off.

Mobile could of hung the 6×9 under the shelf holes and covered the top leaving the grills off for a more stealth look? Wood looks like factory anyway nice!!

Wouldn't be a Mk1 Fiesta without 6x9 in parcel shelf lol

Greetings Mike, Wondering if you can help me. I have a “13” XC60 w/158k. I recently had a start and immediate stall issue that’s cause me to unplug the MAF sensor to get home. Now I’m having a fuel pressure issue after replacing the sensor with a sensor firm the boneyard. Any ideas?

Shelf looks great. Good job.👍

That is a very nice radio for the money. I have a 5200BT and I love it. Does everything I need it to and plenty of adjustments to tailor the sound the way you like.