As a former security guard for Mack Trucks in Winnsboro, SC, the CH models replaced the R-Models (in which Mack Trucks left SC back in 2002). I had a 1st hand look at how the Mack Trucks was built from the frame up.
Right in the first shot, i spotted a hand full of first gen Volvo VNL, the Mack CH, an International 9400. Dayum, Those are the kinds of trucks i like a lot. And all of them in 1 shot was such a unexpected treat.
Hey Wiley I love your videos. Just wanted to say that you may be down 0 for 2 on the Macs, but don't get discouraged because if you multiply two negatives, you will end up with a positive. Wish you the best of luck. Stay safe and God bless. Steve in Oklahoma
hey wily seen you on hanks vids did not no you had your own till it came up on my recommened so I hit the sub and the bell and all the thumbs up. really like your vids thanks. cheers mate.
Hard to believe that Mack was built approx 3-4 years after I left Mack. I didn't want to relocate to Winsboro from Allentown and I took severed relations with Mack about 88. That was a nice truck you have there.
I drove a cabover Mack rubbish truck years ago with that Maxidyne transmission, hi-lo-reverse on the little stick...... The craziest thing was I had all five speeds in reverse, and yes there were parts of my route where I used them.... The boys on the back of the truck thought it was a hoot 😂
If you don't find the keys that is a basic 3 wire ignition switch, one wire is starter wire, one is the 12 volt supply and the last is the accessory wire, take the 12 volt and the accessory wire and connect together and that turns everything on to run the engine like the computer, fuel solenoid, fuel pump and the most important, cb and fm radio's and last you can touch the starter wire to the other two and it should turn over and start with a little help from a bit of starting fluid.
those volvos were great trucks were wonderful to drive and very comfortable. I had the pleasure to drive one of the first vnls that came out(new one every year, with n14 cummins and you could max out your miles every week and no feel beat). My last one was a vnl 770 with 460 n14 and rode as good as about any automobile. we wait every day for your comment. take care, bill
Driven my share of volvos over the years I must the ones I like best were the 1990 - 93 WIA models before the vnl and now the vnr the wia had a classic interior and was a much nicer looking truck than the volvos of today
that ch 600 will be a beautiful restoration my favorita truck you have to lost the six bolts for the injector pump remove the pump nut with a 1-1/4 12 point socket and tray to star it and wait till diesel came out
Wiley those 5 speeds were no good for hauling logs in Oregon. They would run out of steam pulling steep county. I talked to a man that had one on the highway and he said they did pretty good on open road.
@@DontbeWily do you know where i can find some cheap trucks? I'be seen so many trucks on Shop with a hole on the Block but the trucks looks in good Shape if you know about some trucks like this to export to my country ( panama ) i aprecciate some information god bless you sr
I help a buddy of mine with 4 of his trucks. Just getting my feet wet in it but You’re right it’s not good. The cost of a break down on the road is what I have noticed that is so expensive. I know people got to make money. I bought (2) used 285. 22.5. Monday. 665.00 out the door.
Hese es sin plato Lina corrediza o si el mal deporsi son chasis muy bueno en cantidad de peso no pasando las 90 tonelada es bien freccible en el sentido trabaja todo igual me gusta
Those newer model macks were not anything like the r model. Those old trucks tough as nails and would break the driver in most cases before the truck would.
I literally stopped what I was doing and watched this!
its weird seein Wiley without Hank!
The 80's Man deserve it 🤗 willy is a really good life fighter
Are you guys not working together anymore
ol wiley just has his own channel. hank said he wasnt gonna get rid of wiley that easy on a video when he told us to follow wiley
8:24 8:26
Willy , thank you so much for what you let us share with you 👍🤗
Big regards
Thank you and thanks for watching
As a former security guard for Mack Trucks in Winnsboro, SC, the CH models replaced the R-Models (in which Mack Trucks left SC back in 2002). I had a 1st hand look at how the Mack Trucks was built from the frame up.
Thanks for sharing that.
Thank you for Watching
Hey Wily,,great video,those Mack's were tough old trucks,can't wait to see you get this started and running...and Wily....don't be Wiley 😂😂
Thanks for watching
Grt teasin' video, was hoping it would start.😥😢
Great try Wylie and Jacob you will get it running great video thanks
Thanks for watching
Awesome video. Wiley, I appreciate the channel, buddy 👍
Thank you and thanks for watching
That's cool that truck said Panama City that's my favorite place in Florida!!😎👍💗🌴
Another great video Wily......................Your video helped me figure out what was wrong with a crank no start tractor
Thank you for watching
Great work Wily
Thanks
And thanks for watching
Keep the awesome content going wily
Thank you
It will start I’m sure not turning over fast enough great job Wiley
Thank you for watching
Right in the first shot, i spotted a hand full of first gen Volvo VNL, the Mack CH, an International 9400.
Dayum, Those are the kinds of trucks i like a lot. And all of them in 1 shot was such a unexpected treat.
Thanks for watching
I love those Volvo 660's. The Mack CH is a good looking truck too.
I agree
I just had R models back in the day
Thanks for watching
keep at it you guys got this good video
Thank you
Good job and hope you can get it running soon and God bless yall
Thank you
Hey Wiley
I love your videos. Just wanted to say that you may be down 0 for 2 on the Macs, but don't get discouraged because if you multiply two negatives, you will end up with a positive. Wish you the best of luck. Stay safe and God bless.
Steve in Oklahoma
Rocky never gave up
Adrian.
Thank you and thanks for watching
Looks like my old truck! I worked at Shelton twice for a few years back in the early 2000s!
Thank you for sharing this and watching. Be cool if it was
hey wily seen you on hanks vids did not no you had your own till it came up on my recommened so I hit the sub and the bell and all the thumbs up. really like your vids thanks. cheers mate.
Thank you and thanks for finding the channel.
Una gran nostalgia ver en el abandono a estos tractos legendarios
Love Mack trucks. I drove plenty of them.
Hard to believe that Mack was built approx 3-4 years after I left Mack. I didn't want to relocate to Winsboro from Allentown and I took severed relations with Mack about 88. That was a nice truck you have there.
Thanks for sharing that
And thanks for watching
It wants to go real bad! Hopefully ya'll can get it running. 👍👍
Hopefully find a key
Thanks for watching
Sure Glad I Found This Channel
Thank you
Thanks for watching
This resources can change so many people's lives in my country Nigeria. We need it.
I drove a cabover Mack rubbish truck years ago with that Maxidyne transmission, hi-lo-reverse on the little stick...... The craziest thing was I had all five speeds in reverse, and yes there were parts of my route where I used them.... The boys on the back of the truck thought it was a hoot 😂
Thanks for sharing and thanks for watching
Enjoyed it bro Wiley
Thanks for watching
@@DontbeWily you bet buddy
Wily..You might need to get a snake charmer on that Mack. Enjoy your videos
Jacob is younger and can move faster plus He stands a better chance to survive He goes first from now on.
Thanks for watching
I rely2x love that tractor heat♥️♥️♥️
Drove this style of tractor from band new to 800,000 miles they are tough.
Thank you for sharing and
Thank you for watching
If you don't find the keys that is a basic 3 wire ignition switch, one wire is starter wire, one is the 12 volt supply and the last is the accessory wire, take the 12 volt and the accessory wire and connect together and that turns everything on to run the engine like the computer, fuel solenoid, fuel pump and the most important, cb and fm radio's and last you can touch the starter wire to the other two and it should turn over and start with a little help from a bit of starting fluid.
Thank you for sharing that I will try it out
Thanks for watching
Dontbewily Hope you Can get That Truck Up and Going Keep Up the good work Billy Lizza Uniontown pa
I am going to have to start something.
I am at 0.
Thanks for watching
Good video Wiley. See if you can find some Autocars.
Will do
Thanks for watching
Fine video sir
Thank you
Que lastima que no les den una segunda oportunidad de que vuelvan a las carreteras en Costa Rica sobran quien los compren estos buenos camiones,,
Willy and Hank need to take a Lock Picking Class!! 😁😁😁😁
I nominate Hank. Do I have a second ?
Thanks for watching
@@DontbeWily 🤣🤣
@@DontbeWily I knew you are gandoooo
those volvos were great trucks were wonderful to drive and very comfortable. I had the pleasure to drive one of the first vnls that came out(new one every year, with n14 cummins and you could max out your miles every week and no feel beat). My last one was a vnl 770 with 460 n14 and rode as good as about any automobile. we wait every day for your comment. take care, bill
Thank you
I am going to do a walk around and try to start one
Thank you for watching
Driven my share of volvos over the years I must the ones I like best were the 1990 - 93 WIA models before the vnl and now the vnr the wia had a classic interior and was a much nicer looking truck than the volvos of today
Good 👍👍👍
Good luck😊😊😊😊😊
Thanks Wily i like you vids til next time.
Thanks for w
that ch 600 will be a beautiful restoration my favorita truck you have to lost the six bolts for the injector pump remove the pump nut with a 1-1/4 12 point socket and tray to star it and wait till diesel came out
Going to try it
Thank you for sharing
Thanks for watching
Wiley those 5 speeds were no good for hauling logs in Oregon. They would run out of steam pulling steep county. I talked to a man that had one on the highway and he said they did pretty good on open road.
I never drove a mack Wiley, except a test drive once bobtail
Shud a brought em to Africa, damn! Those things would be gold out here!
👌👌👌👍
Great video enjoy watching your videos keep up the great work
Thank you for watching
I had one that Max of the fire speed and I kept it all together two weeks I got rid of the damn thing up I see what he want the damn
Some of these trucks looks on good Shape to repair
I think a few would be.
Thanks for watching
@@DontbeWily do you know where i can find some cheap trucks? I'be seen so many trucks on Shop with a hole on the Block but the trucks looks in good Shape if you know about some trucks like this to export to my country ( panama ) i aprecciate some information god bless you sr
Yes 1st, the best will it start channel around
Thanks so much! that's high praise.
Belleza de camiones
У нас бы эти драконы еще лет 20 бы ходили...
Good stroy
I know you will get it running Wily, no doubt in my mind
Thank you
I have a master mechanic coming to help. Please stay tuned
Thanks for watching
Yo Wally, dude I’m locked in
Thank you
Thanks for Watching
that was smart putting the tarps down.
It sure was
Thanks for watching
Que doloroso ver esas joyas botadas.puros camiones de verdad😔
Wow
I’d be interested in some of those internationals
Ok
I have a video coming out of the other trucks. This weekend. Or should be.
Thanks for watching
Step in the clutch pedal and try it
Nice vedio I ❤ it
Dear I want to buy it .
Of you have dump truck...
👍
I am likeing you channel-
Thank you
Хороший канал!
Ни хера не понял что деда говорил. Но было очень интересно 👍
hope you come across the key be nice to see it run
I hope so
Thank you for watching
Donde están esos camiones?
Nothing going to add oil?
oh yeah
Muito camião abandonado 😢 triste tem coisa boa. Brasil
Sangat bagus .......tetapi di negara saya tidak ada unit seperti itu
No Ford aeromax out there😁
You can put a boot in that tire if you’re good…lolol..it’s never gonna warm up here in southern wva…
Gorilla tape it
Thanks for watching
эти шатлы походу рейса по четыре на Марс слетали 🙂🚀
LOVE ALL..
Thanks for watching
LOVE ALL..
Need hank yall are a team !!!
Only at lunch time. LOL.
We still do the same amount of videos in his channel.
Thanks for Watching
I worked on a make..Air start.....omg..8❤
There are about to be a lot of companies with graveyard trucks the way this industry is going. 😂
I help a buddy of mine with 4 of his trucks. Just getting my feet wet in it but You’re right it’s not good. The cost of a break down on the road is what I have noticed that is so expensive. I know people got to make money. I bought (2) used 285. 22.5. Monday.
665.00 out the door.
Hey sir love your video I’m looking for a ten wheeler wrecker to buy would love it to have a crane Also
Don’t see a lot of those for sale but will keep a eye out
Thanks for watching
We have faith in you
Thank you and thanks for watching
Hese es sin plato Lina corrediza o si el mal deporsi son chasis muy bueno en cantidad de peso no pasando las 90 tonelada es bien freccible en el sentido trabaja todo igual me gusta
Did you try unplugging it waiting for ten seconds and plug it back in? 🤣😂🤣Bluetooth isn't working ... 🤣😂😂
I didn’t but I will
Thanks for watching
Que tristeza ver esos camiones así en ese estado aquí en Panamá estuvieran asiendo dinero
That's a E7 350 hp one of the best engines ever made
Thanks for watching
Himm no nomp😮
Not making oil 😂
Glad I subscribed. Now that wily has his own channel I can unsubscribe from hamiltonville farm……just kidding both are great channels
LOL and Thank you
Thanks for watching
Керемет
Those newer model macks were not anything like the r model. Those old trucks tough as nails and would break the driver in most cases before the truck would.
Thank you for watching
uno de esos de 1500 quiero parami Volvo o internacional me gusta gracias Marcelo de argentina
Mack is the only one left
⭐⭐⭐
هذيه شاحنات عملاقة يوجد منها في جزاير ومزالت تسير الي يومنا وقوية جدا
Thank you for watching
Gentry and Sons would probably haul boats with half those trucks by the weekend! They love junk.
Thank you for watching
En dónde estan estos camiones el lugar o estado siempre dentro de usa
Eu precisando do caminhão desses para trabalhar mais e assim mesmo .
Pt 2
It for sure wasn’t making oil 🤣
I am going to bring some on the next try
Thanks for watching
Sounds like she is trying to make fire and smoke!!
Thanks for watching
En parte están ubicados porfa es d Venezuela compró vicios y ch
This truck is very nice, there is nothing like this in Indonesia. Can I have it for free on this one truck?
Lots of Volvos
I am going to try to start one
Thank you for watching
Poor trucks they sat to be rotten there.