400k Mile Ford F350 Has Catastrophic Failure Can A Mechanic Save It???
Вставка
- Опубліковано 28 вер 2024
- buy the oil absorb mats here amzn.to/42gdexa
buy the blue loctie stick here www.amazon.com...
buy the red loctite stick here amzn.to/47OQLIL
Follow me on ...
instagram / stephencoxyoutube
tiktok / stephencoxyoutube
Click on these Amazon links and help support the channel!
CRC Knocker Loose amzn.to/3oz2ffW
CRC Brakleen amzn.to/3owg3rh
white oil only absorbent mat amzn.to/3B9GgBb
Gray absorb all mat amzn.to/34Iu9z4
oil drain caddy for under a lift amzn.to/3Ll3dWL
camera that I use amzn.to/3ryMSpD
microphone that I use amzn.to/3sngLZg
bendy tripod thing amzn.to/3rwJmMj
cheap tripod I use amzn.to/3J8gZu3
desktop microphone amzn.to/34J3Rwg
As a home remodeling contractor I worked in 4 homes with Down syndrome children, they are the sweetest and most wonderful people you will come across. They also gravitate to people with kind hearts who treat them very nicely. Having him hanging out with you speaks volumes about you. Hi Raymond, nice beard that you have!
Who doesn't love a tard wrangler
Down syndrome people are indeed the most loving, caring, and honest people I have ever met.
I remember the unboxing video for the smart washer. Cool to see it still working all these years later
What a good little boy! He should be proud, not embaressed cuz hes doing a great job helping dad!
First, hey Stephen !!! I’ve been following you since you had minimal subs back in 2015! I always appreciated your content and think it sucks it got taken down from you. However I appreciate you still at it and I hope chuckeeee is good. Thanks man
You'll never know how much I appreciate this comment. Tha k you so much!
It's cool to see a dad teaching his son to work on vehicles
Good to see you on you tube again! I will tell you this when getting out of skid steers be carful I slipped and fell and tore my Acl witch took me out of the shop for 4 months
Dang, that sucks buddy. Hope you're all healed up!
@@StephenCox. getting there, it’s a year for full recovery
I just came across your channel, and this is my first video of your that I’ve watched. I just wanted to say the way you had your sons helping, and seeing your interaction with your neighbor absolutely made my day.
Thank you so much!!
Your neighbor's an absolute joy! (and you're a good neighbor 😉)
Nice to see you doing it right with the OEM diff additive and RP synthetic.
This is _NOT_ a place to pinch pennies!
That truck works hard for you. It deserves the best.
I have never had rear rotors with e-break drums not stick like they are glued on unless it has been removed before and the good man had the forethought to strategically put a little can't seize around wear it contacts the lug bolt flange. Any way good job. Love seeing kids start getting involved in machines early in life 👍👍🎉
Put a spot of weld on an inner race and it will draw up and fall out. Takes 10 seconds
My dad loved your videos. I also loved you and Chuckee videos i still go back to your 7.3 videos. We have a f350 7.3 for our farm. Keep the content coming.
Teaching him young love it! Takes time little man you got this.
That’s awesome to see your little man working with you. Hope we got a young gear head coming
It was great to see you teaching your sons and having them help you. Also talking to your special neighbor was nice also. I enjoy how you share your knowledge and showing practical tips to make tasks go better. I like it when you collaborated on projects with chucke2009 too.
Thank you 😊
One of the last videos of yours I watched, you were just moving into a new house and trying to get electricity into the workshop. And you were having trouble with your green truck then!
You have a great helper, thank you.
I have a 2011 V10 Ford Ambulance that has 430,000 miles on the engine. That same van has gone through 3 rear ends, and has the original transmission.
I once had a storage unit that I was locked out of.... then I figured out I didn't pay bill.
You seem like a good guy man. Great video just earned another sub 👌🏽👌🏽🙌🏽
Thanks for the sub!
So glad your back making videos, thanks for all hard work, definitely learned and still do from the videos and appreciate the honest and good heart. Kudos from frozen north fellow hammer on shit till it works:P
Went to subscribe and realized I already was but must’ve forgot. Need you to post more!
How are you getting along this year as a heavy duty diesel mechanic Stephen sir and have you got a updated tool cart tour on your tools like the icon sockets and stuff and the other tools you added to them,,
It can be hard to spot an evil man but it’s never hard to spot a good one.
Steve, you will be in for an eye-opening experience the first time you drive on ice with posi- trac after having done it with a one wheel wonder beforehand, 😮
I'm Rollin in a 97 chevy single wheel 1 ton 292242 miles we never get to keep up on our trucks
I bet a guy coulda removed the race with some welding. Could weld a bead all the way around it. Let it cool to shrink. Or weld something to attach a slide hammer too
bellVILLE, not bellVIEW washers.
Have oil and coolant blowing out of my tail pipe 2000 f 350 176th miles what do you think it could be
Damn dawg tell your son to loosen up and life is full of mistakes!! Being embarrassed is a part of life and cannot be afraid of it
My dad and I have a great relationship he isn’t handy at all and didn’t really teach me much about life as I played sports up thru college it’s all he knew so when I graduated I was pretty much green in life
Started doing concrete with a family friends father I didn’t even know what a 2x4 was..
Fast forward 5-6 years I run a small concrete company
Moral of the story is just because you don’t know much today or not good at something doesn’t mean you can’t get good at it and be good at it down the road !
Keep on giving her man god bless 🫡
If you were running Amsoil 100% synthetic oils, you wouldn't have half the problems you do now.
I realize this is a reupload from your old channel that you gave up in your divorce.
Teaching your son every aspect of being a mechanic and a content creator!
Oh, dear older Steve! You're going to be okay! 👍
This vid wasn't reuploaded.
Thank you for your comment and thanks for watching!
Look. Your knowledge is impressive. Explanation is VERY helpful. This is educational. But your camera work is so bad I can't watch the rest of the video. Im stopped at the 31 minute mark. You need to HOLD THE CAMERA STEADY! Stop zooming in on your face!. Plan better the direction/distance/focus you are shooting and USE A TRIPOD. Or hold the camera steadier. Even a slight movement when zoomed in can make a person dizzy. If you don't fix your camera work you lose viewers, and your subscribers will not grow. Im sorry to have to tell you this. I've watched your videos on stuck head bolts and they are excellent. I WANT to see more from you, but you need to plan the shoot better, and edit out the useless spots. Again...sorry to be a critic, but I think your stuff is worth it.
Good morning 🌞
The verse of the day
01/29/2024
🐑🐑🐑
Three things will last forever-faith, hope, and love-and the greatest of these is love.
🐑🐑🐑
1 Corinthians 13:13
Fiancé? Didn’t learn from the last marriage ah? 😂 Congrats anyways
Prenup for the win! 🍻
Stephen , so good to have stumbled upon your channel.! Big fan and look forward to more content. Keep up the good work!
I know no one really truly knows you other than what you show on UA-cam, but it's pretty cool that your real as hell. Keep doing what you're doing bro.
I lost touch with your vids and found you again but… I have know idea what happened.. last time I saw you , you were in a house with land in a shop… can someone fill me in
I divorced my ex-wife a few years ago. Lost the house, shop, business, half the income from the old youtube channel and the ability/right to upload to it.
But, things are going a lot better now.
@@StephenCox.so sorry to hear that. I will loyally watch your uploads…
That sounds like your front driveshaft. Double cardan joint. Are your hubs locked? If so then unlock them and make sure they are disengaged and test drive. If the noise is gone that means it’s the driveshaft. Don’t drive it far or you’ll bust the transfer case.
Mason, don't get embarrassed for leaning to do things. You have a great teacher there. Have fun learning everything you can. And you made this a great video with those awesome dance moves.
Absolutely right. Plus, by my yardstick he's doing just fine. If you point a camera at me I instantly forget how to do anything.
16 yr model 6.7s are great engines. Last yr of steel body super duties
Carrier bearing and uni joints atleast that was my issue with same noise
Hey if you add to much limited slip additive to the oil the clutch packs will slip easily and be just like a open diff. If your running a gear oil that already has the additive don't add more. I have a video on my channel of the results of to much additive
put a weld on that bearing race and it will shrink up and fall out
Killer job Mason
you did a great job buddy
Yeah v10’s where good even though people talked crap about them lol new dodge’s/ram ain’t worth a crap got 50/50 shot of getting good one or not ford idk anymore they getting crazy fall back to old heart beat of America Chevrolet idk anymore just about to go back to 70’s no computers and junk
4:10 😂 he cracks me up
Love all your special neighbors & family, kudos for how you treat everyone! If I watched you for different reasons in the past, this just cinches the deal for me forever!! You are indeed a great man in my book!!
Mechanic Steve! Bummer you don't have the shop to work in but it just goes to show that you can still get it done! Glad to see you still putting out content even after all you've been through. Solid work man.
Good morning 🌞
The verse of the day
01/27/2024
🐑🐑🐑
The LORD will work out His plans for my life- for Your faithful love, O LORD, endures forever. Don’t abandon me, for You made me.
🐑🐑🐑
Psalm 138:8
Well Steve I would say you got your money's worth out of the V10 in any case.
Me too!
what happened to your buddy the welding farmer? think his name was Chucky. i lost your subscription for awhile.
Stephen, we are on a roll now! Keep it going!
Recently switched from the ol 7.3s to V10s are plow rigs they are solid, good power and always start in the cold
Mason You did a great job learning , Ethan you need to slow down on growing or you are gonna bust the ceilings. Great video.
It's nice of you to take the time to teach your boy these life skills.
I hate a v10 worse vehicle I ever worked on had to pull the van body completely off the frame to pull a head and had a bent rod
I love the white pig mats.
Didn’t even know they made them, I’m telling my dealer to change to them now!
Hell yeah learning the new Generation how to wrench great job sir love it 👍👍👍
I have 354000 on my excursion with a v-10
Thumbing up guys. Well done to you both. Well done young man on the impact and camera. 👍
With the 6.7 get the S&S CP4 kit that fixes the pump from destroying everything. Well worth the time getting into it.
My rule for vehicles over 20yrs old is that those hoses on the calipers get replaced. Calipers get replaced in sets, & so do lines. Unless you could only do 1 & the line but internally welded itself but you need the truck the next day so it gets left alone.
My 93 is the same way. Changed the driver side hose but the passenger side decided to not come free so I left it alone, & gotta go at it w a cutter next.
Great video. It's always great spending time with our kids and teach them at same time. U go back you original channel?
Anytime my truck makes a howling sound going down the road I just pull over, pop the hood, and let the critters run for it 😂
Lmao 🤣
Cold down there in Granberry! 12 degrees F is not normal for you guys. Sorry to see more troubles on the service truck - boys are growing up fast and good to see them helping out. Raymond is a star, he warmed my heart and I will search out and listen to his favourite song. Y’all take care down there in the lone star state. Stephen, you won’t consider a 6.0L diesel for new rig? Going to a 6.7 might be a wise move… I’d love to hear your opinion, cheers, Ed
Edit: thanks also for explaining how the hub/bearing works on the super duty trucks… always wondered, now I know 😊
It's cool to see your level of patience with kids. My Dad was such a hot head. Thank God my grandpa was not, he was the reason I ended up wrenching
glad to see you back been watching you for a long time lots more to say but not enough time....have a good day
To Mason: You did a great job. Step one to any job is to grab a tool and try!
I'd love to have a neighbor like you. 👍 👌
Mason is lucky to have you as a teacher
Titan tools carbide scraper like $15 O'Reilly's auto parts or advanced Auto parts
I just had my first kid a boy. Warms my heart to see you teaching your son. And good to. Why it’s called a 3/8th or half inch impact or Ratchet. Things I was never explained in detail…. Super cool brother
The square head driver is 3/8 of an inch. For 3/8 sized drive sockets
The little guy is learning that everyone HAS to start out bad to become great good work man
Keep up the good work
Good to see you in a house. I had wondered how long you muscled it out sleeping in the shop.
1.5years 😡
An old vid of yours told how the left hub nut is left hand thread.
Absolute Chad fixes his truck.
I'm not sure if that's a compliment or not?
The next George Lucas!!! Great job Stevo.
It is a Belleville washer… not Bellevue.
Don’t forget the skunk juice. Stuff reeks.
Get out there and fix something ,Stephen Cox
Brilliant video
Enjoy your weekend with your children and your girlfriend around you, Stephen Cox
👍
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 07:40am Good Morning 🙏 🌧 and more 🌧
Thanks, you too!
Nice klrs. Iv had 3
''Knowledge speaks, but wisdom listens.''
~Jimi Hendrix said that.
''Fixing embarrassments in this old world, has it's own excuse for being.''
~Encouragements said that.
Speaking of this old world, just brought to mind the these few lines...
We banged the drum slowly
And played the fife lowly
You know the song in my heart
In the turning of twilight
In the shadows of moonlight
You✝ can show me a new place to start.
~Bob Dylan said that in one of his songs on album: "Oh Mercy" (1989)
Love it, Uncle Rock!
It loves you to Nephew@@StephenCox.
Where did you buy the axle if you don't mind me asking? I need a replacement Ford 9.25 inch at some point. Last time I got an axle that cheap I had to drive to Brownwood
Dude here in Granburu buys trucks and parts them out. Shoot me an email and I'll give you his number stephencox09@gmail.com
15:35; i thought they were puppy pee pads.
imanidiot...
Lmao