I just bought one, for small venues, getting a lot of favorable comments on the effects on vocals, quiet as a mouse, nice and compact.very happy with it. Great review
Congratulations on the new board - I've had mine a couple of years now and still use it every day for practicing my set - its just a great little board
Nice mixer. I got the same board but with a 12 channel. What I love on this series is the built in compressor and its reverb effect for singing vocals. The rec out is clean. I once used this in recordings during election season.
@@coldhardtruth333 LOL - I thought you were commenting on my Zoom guitar pedal video, and THAT will probably be on sale for the holidays :-) sorry for the confusion but thanks for coming back to watch the video !!!
I picked up my MG10XU today. I was looking at the 12 but that was just a bit to large for my space. So far so good and it sounds better than the Behringer desk it replaced. Thanks for the review.
That's the main hub in my home studio. Love the sound of it. Pure, clean, natural and the USB output is stunningly good. I often see myself recording trough this desk, it's very convenient and with the fx send i use my BigSky, Deco for reverberation and tape fx for my instruments and vocals. Experimenting too with overdrive and modulation pedals as outboard fx, amazing job. I tried RNDI S before the D pre's and pushed them hard and they saturated really nice, got the nice colour from the Neve di. It's all around a great piece of kit to record on. I recommend.
Are you able to hear yourself recording at same time hear playback from the computer without latency? I'm currently using a Behringer Q502USB Mixer and in order for me to do that, I had to loop rca cables.
So agree. I've owned several small-gig mixers and yamaha has been the best -- easy to use, great sound and works seemlessly with Cubasis for recording. No regrets.
Looks like an excellent blend of features, especially at that price. Everyone should be very conscious of which specific features serve their own goals, because there are a lot worthy choices within a hundred bucks or so - each with a different cocktail of features. I went with an Allen & Heath ZED series, cuz I got sweepable mids EQ and integrated power supply (no honking external rat-bulge-in-a-snake). But if you value the built-in compressor more, this MG10XU is a unique choice.
Update:i hit buy on Amazon $209.Watched a ton of videos on this and many people hate behringer.and behringer seems to be runner up.i will swap out 1/4 in.mic cords for the xlr.this mixer is a 2014model,but people still love this
Hi im a Dj to and planing to get this only for Djing and not using a mic. Do you think the sound quality get a boost or better/louder/stronger sound if using this mixer over master out on lets say a Pioneer DJM900 ? Most videos on here are aboutt he mic. I dont have one and will never buy one. Wish some one on here did make a video only for Djs rigging up lets say 4 tops and 4 subs ,)
@@TheImageDoctor I actually ended up with Allen & Heath ZEDi10FX. Unfortunately not faders on the channels, but include pfl and fader on the master mix.
@@TheImageDoctor thanks for getting back to me ..do you have a link to the attachment adapter to attach the Yamaha mixer to a mic stand ? Thanks in advance for you time and knowledge . ☘️👍
Unfortunately, there is no dedicated output for subs - all outputs on the board are the same mix signal, although the monitor/headphone and mains have separate volume knobs - so yes, you can hookup subs directly to the board if there is a crossover in the chain
When I had the TurboSound IP-2000, I ran directly into the speaker because it had a built-in crossover - when I upgraded to a 3-point TurboSound system, I added a dedicated crossover (used on craigslist) between the board and the speakers
It's a fair point... the USB enables use as an audio interface which IS a big plus for the board and deserves mention - but it's only 2-in/2-out (i.e. stereo both ways, not a true "multi-track") and I already had a decent multi-track interface, thus my "reasons why" are more related to mixing live sound in rehearsal settings and from the stage in small venues - so absolutely: use as a USB audio interface is worth noting... it just wasn't one of the big reasons I chose the board
The Dub Reggae music you have playing in the background made me wonder if this mixer could be used to do Dub Reggae style mixing with this one. But the bigger version with the faders (MG10XUF) would probably work much better for trying to do that kind of thing I guess. 🤔
What a great video!! I can feel the positive energy coming from your voice! great vibes... Do you know if there is a way to connect this mixer to my home theater system? I don't have powered speakers ... thanks for sharing
Certainly you can... just use this (type of) cable to connect the 1/4" main outputs from your mixer to any L/R (i.e. red/white) RCA input jacks labeled "Phono" or "Aux" or "CD" input on (the back of) your home theater system: amzn.to/3Rr1KS3
@@TheImageDoctor thank u so much.. my tv ,which i intend to connect to the mixer has an optical output for sound. Could u pls recommend a product i could use to connect it to the mixer?
It would be a neat option - FWIW, I literally still have mine on the same mic stand + adapter since I made that video LOL - it's just super hand to have right at your fingertips when standing up playing 👍
Got this coming tomorrow. Hoping I can connect, Yamaha RX11 drum machine, Yamaha ex7 synth, Roland ju 06A boutique, Juno di synth, Roland d550 rack synth and Roland d70 at the one time? Don’t use mics recorded myself singing once and heard it back and realised best not to do that again haha!
There is no form of gated "limiter" on this board (other than the HPF's I suppose) ch.1 + ch.2 do have one-knob compressors, but there is no limiter / compressor of any kind for the master send
QSC makes a great mixer - I still use this Yamaha every day for practice w/ my PA system, but have been leaning toward a Zoom Livetrack unit so that I can run live sound and capture multi-channel recordings simultaneously - just need to figure out a good mic stand mount for it...
Good highlighting of features. May consider one myself in all seriousness. To be honest - an external PSU is not an exclusive to smaller "home studio desks" (I only say this as it's not likely to be found pride of place at Abbey Road, for example). I've had desks that were bigger in format, features and price range... Which still had an external PSU. Power supplies are notoriously noisy and kick out quite a bit of interference - which can and will have an adverse effect on overall noise from a desk... As well as being bulky things adding to size format
Thank you for the video. I got one and it does a great job. I’m using GarageBand and have a lot to learn. The mixer seems pretty easy too use I just have too learn how to use GarageBand better. Great unit.
shoots I forgot which one this very well done video was a review of :D I'm really drawn towards the Emu MP7 & XL7 this will be my first time setting up to make my own music and diffe3rent video
Which is "best" ??? Hard to say - they are VERY similar boards w/ almost identical specs - two notable differences: The Mackie is a 2-in / 4-out audio interface, where the Yamaha is a 2-in/2-out... The Yamaha has a mic-stand mount, the Mackie does not - both are good boards, I'm sticking w/ my Yamaha
It's best to create a mobile power station using one or two car batteries and a voltage converter. This will power the mixer and your powered speakers. I've seen DIY solutions that have costs that are just slightly greater than the batteries themselves.
Hello sir. Thank you for the video of this unit. The XLR outputs are what I'm after as well... Quick question though... Can you use BOTH the XLR AND 1/4" TS outputs altogether ? I.E. - 4x outputs.... ?
@@TheImageDoctor Thanks for the reply. Well you go into a lot of detail without going way off topic, or deviating from understandable English. Seems a rare quality in YT reviews! (Also visuals are super clear and the mounting feature for mic stand is something the product specs would often miss out, but such a useful feature!) Buuut since your here...haha, I did have one question about this mixer that maybe you might know? (Yamaha's specs seem a little hazy on the AI detail). It has a 2 in/2 out Audio Interface, you say. So if have 2 mics and 2 guitars plugged in, and connect via USB to my DAW...will this show as 4 separate tracks in my DAW, or 2 channels will share 1 track each? Also (kind of separate but) the 2 analogue outputs are XLR, but there are 2 standard 1/4" outputs below it. All 4 can be used simultaneously, or only 2 outputs can be used? Thanks for any help. I have 'subbed', and look forward to the new video!
Nice review. I know you said that you can't mix/combine effects, does that mean you can only use one effect across all the channels or can you use for example reverb on channel 1 for voice and chorus on channel 2 for guitar for instance. I just ordered one but I thought that I would be able to use effects individually on all channels. Thanks for review and response. Andrew
Correct, the single effect selection / parameter is for the entire board - though of course you can dial the effect "level" on each channel individually. Great quality effects for a small board, but with limited utility beyond general PA use.
@@TheImageDoctor Thanks for the reply. I bought one and its nice, though I wish I could put reverb on voice and chorus on guitar. Wound up using chorus pedal which I guess is no big deal. I did want to keep it simple, but also I could not find anything comparable for the price. Thanks again.
@@mjb12ification I mean sure, they're just combo XLR+1/4" inputs w/ pre-amps and PAD switches, so they should work - only difference w/ ch.3+4 is they don't have 1-knob compressors like ch.1+2...
You shouldn't need a DI box if you're running the guitar into ch.1-4 since those have preamps built in - but there are many reasons you might prefer using a DI, such as more tonal control (than the board offers) and running the guitar into ch.5-10 which do not have pre-amps - I use a LR Baggs Paracoustic precisely for these reasons
Hey! Great review, i just had a question..where can i buy the mic stand adapter? Ive looked for it all over and cant find it on the internet. Can you leave a link to where i can get one? Thanks!
Hmmmm - sorry about that. I suppose a link would help - LOL (and now added to the description) Model no. BMS10A: www.sweetwater.com/store/detail/BMS10A--yamaha-bms10a
Sure - you can go from one or both (L/R) of the XLR outputs directly into your DD003 rack unit. But there's no way to connect them via USB or other "digital" connection.
@@TheImageDoctor ok right now I have my studio monitors connected to my 003 rack..once I get this mixer..I 'll connect the monitors to my mixer ..that's good I think..
That's a great question, and I don't know - my guess is it would "work" but based on the little I know about that particular mic, something like a Cloud Lifter would definitely be worth considering
Thank you for a great review! I’ve narrowed my search down to this mixer, the Behinger xenyx 1202fx or an Allen Heath Zed 10fx. It would be used live for a male and female vocalist and a Denon dj controller as well as a keyboard. I would also need to connect an iPad for some additional backing tracks. I would appreciate any input?? Thank you.
Yamaha mgp 12x is perfect for what you want to do, it’s a bit more expensive but well worth it if you can stretch to it, you might even pick up a good used one on eBay
For live sound, noise is not an issue - however, there is a particular combination of settings to use when operating as an audio interface to ensure the preamps aren't maxed out (which introduces noise)
@@TheImageDoctor Thanks for the reply mate. I just ordered this mixer and I am going to connect to my PC for recording into my DAW which is Cubase Artist. :)
Yep, you're the second person to remind me about the 24bit / 192khz spec as an interface (thought I had replied to a previous comment, now I can't find it) Anyhoo... you're right: 24/192 is arguably the "industry standard" for digital interface sampling, although many other devices, especially lower-end audio interfaces, only offer 24/96 - which is still great, but the fact that the MG10 offers 24/192 sampling is AWESOME and provides 256x more resolution (i.e. sound quantization) than "CD quality" sampling, which is 16-bit / 44.1khz
@@TheImageDoctor Well this is the reson I ask. The one on the video have 4 preamp but Can not manage 2 conderser mic. ua-cam.com/video/xVAXk-3gvlg/v-deo.html
You mentioned that the pre-amps are not particularly warm. Any tips on how you fix that. It's becoming a deal breaker for me. I have a basic 4 Channel mixer that gives me a nice warm vocal. Hard to switch to yamaha despite the extra features.
Great point... maybe I should have said it like this: IMO... the Yamaha pre-amps don't "color" the sound, so I'd describe the sound as more "clean" than "warm" - of course these are all subjective terms anyway, lol - as for "warming up" the sound, mic selection and speakers have a lot to do with the final "tone" and can certainly warm up the overall sound, but apart from rolling up the low-end a tad or using the chorus FX, there's not much else to be done on the board itself to "warm up" the sound
@@TheImageDoctor our band goes in ears but I have a problem with switching in ear monitors all the time and I don’t want to ruin the mix for everyone every time I EQ the mix . If I lower mids it’s for everyone . So I was thinking of getting a Yamaha like this one and linking it to the mixer so I can get to EQ and not affect anyone else . Is it possible ?
I agree the FX aren't "studio quality" and are best used sparingly - but when you need to add a little depth and spaciousness to your mix, having SOMETHING on-board to work with is much better than having nothing. But to your point: the FX could certainly be better. Personally I'd be ok with the existing quality if there were simply a few combination options available (i.e. chorus + reverb)
@@TheImageDoctor I am not commenting on the quality as i have not tried it but practically nobody who uses this mixer is going to be using these effects apart from a curious tweak at the begining.
As a super-small live sound mixer, the MG06 reviews are virtually all positive - the smaller MG06 does have the mic stand adapter and seems to be a favorite of keyboard players - but the smaller board doesn't have the 1-knob compressor and does not function as an audio interface, so it's a one-trick pony (live sound)
Is there an decent external vocal delay stomp box that you could add so you get reverb and delay, without having to add a full featured vocal processor?
There are several, but if you're gonna spend another $100+ to run a dedicated piece of hardware via the FX loop, the stereo M100 from TC Electronics seems like a good fit at $125 - I don't have one but it's small, flexible, and reviews say it sounds great: www.sweetwater.com/store/detail/M100--tc-electronic-m100-stereo-multi-effects-processor
Thanks for the good word :-) and Yep... vocal pedals range from $70-$800 new - and do make sense if using this board for live performance. Personally, I grabbed a used Harmony G-XT unit from TC Helicon. It offers pitch correction (via your guitar input), vocal doubling, multiple harmonies, and basic FX for both voice and guitar. You can even use it as an all-in-one-plug-n-play solution for the solo singer/songwriter guitarist inside you. Check my other video at 38 min,35 sec for a few words on that pedal... ua-cam.com/video/CSqoJA8OY7M/v-deo.htmlm35s As far as equipment options go in general, that video is also my personal quest for value and flexibility, all wrapped up in an "incremental" equipment plan, w/ multiple phases and price points, beginning at $100. It's kinda long, but I tried to keep it interesting - lol...
Here's the most inexpensive option I can find ($123 new) to "upgrade" the on-board effects via the FX loop: www.sweetwater.com/store/detail/M100--tc-electronic-m100-stereo-multi-effects-processor It only has two "combo" effects, which is a bummer, but ALL of the effects are definitely a step up in quality from the MG10XU's on-board options.
Should I replace my behringer QX1204USB to these?.. Mine have plus like Klark teknik effect, all channel have Compressor.. Tnxx... Is it worth to change this Yamaha??
Each mixer has its good points - the Behringer has a few MORE features, the Yamaha has better QUALITY features - which is right for you just depends on what you're looking for
Hard to disagree - having just one (L/R) "send" signal for mains AND monitors/phones does limit the uses of this mixer - thanks for chiming in Mad Ness
IMO, the MG12XU is 100% worth the price. *IF* you want a physically bigger board that sits on a desktop (no mic stand adapter), and you want (2) more primary inputs with in-line compressors, and you want channel faders (instead of knobs), and you want a LOT more routing options for live sound and recording - HOWEVER... based on your question about PRICE point and not specific features and functional differences, I'm guessing the MG12XU is probably NOT worth the extra money in YOUR situation
I bought one of these used and guitar center today. There is something wrong with the left main out put bus so I am taking it back but it also has one of the worse frequency responses I've ever heard in a mixer which is stunning to me because i have bunch of other Yamaha stuff and its great. It sounds like its got some impedance issue but I tried out all possible variants of balanced/unbalanced, line, mic whatever and the issue persists.
I've never heard of THOSE particular issues with THIS particular board... but dude, that's really frustrating!!! You go out during CV19 (which is an ass-whip in itself) and spend your hard-earned money with a reputable retailer for a brand new / brand name audio mixer that has overwhelmingly positive reviews online. You DESERVE to have the SAME experience. But you don't. Your particular unit turns out to be, for whatever reason(s), completely unusable. That sucks (!!!) and I can totally identify man - I've been there myself. Not with this piece of equipment, but with others. Obviously this channel can't make things "right" for you - only Guitar Center can do that - but I understand the desire to post something somewhere about your personal experience. (When things go sideways like that for me, I often do the same thing - lol.) If there IS anything positive to be said... at least you can take it right back to GC for exchange or refund. (Maybe that unit had been returned previously and accidentally re-stocked rather than being returned to Yamaha.) Yes - returns are a major hassle and you shouldn't HAVE to do that. But again (AFAIK) the MG10XU is NOT known for the the issues you're reporting so it's a pretty good bet that switching it out for another brand-new unit will fix all the problems. I bet GC will even let you A/B your existing unit side-by-side w/ another brand new MG10XU, just to make sure you're getting a good one (and make sure they know about the bad one too.) FWIW, I had band practice this weekend using the same setup in my follow-up video with zero issues. We jammed for nearly 3 hours (running various combos of guitars, vocals, and a play-along track all night long) and the Yamaha MG10XU operated perfectly. As a matter of fact, the back panel was hardly even hot to the touch at the end of the night. I mention all this simply as validation and encouragement: the MG10XU is a good piece of equipment. Pretty sure you just got a bum unit from GC.
Good questions... The FX loop uses a single TRS insert, where send/receive signals are separate but they have a common ground. The same FX master and channel sends work for the FX loop.
@@TheImageDoctor Thanks for the reply! So I could use a splitter of some kind to run, say, an FX pedal? Or just run the FX out into a separate channel?
I have no experience w/ that Soundcraft board - I've used the Yamaha to mic drums but would have liked to have at least 6 x XLR inputs to do that - JM2C...
when you say it's 2 in 2 out mixer, that means that you can record master left and right tracks into a DAW? so not like recording separate tracks for each channel? thanks
Correct Samuel. It's NOT a true "multi-track" recording interface, just 2 tracks (i.e. L/R stereo) from the computer into the board, and from the board into the computer.
When you go from your (L+R) xlr outputs to your speaker column, do you use just one xlr and go mono? If not, what is the benefit of going with 2 xlr’s if you only use the one speaker?
It all depends. If your only outputting live instruments, you can just use one XLR cable, since both signals (R + L) are the same if you leave the left and right knob at 12 o'clock on the mixer). Now, if you have a stereo signal from an Laptop (or any other stereo source), you need to use a Y adapter, that goes from L & R, to one XLR, that would then go to the single speaker. Or, you can run two XLR cables if your speaker has 2 XLR inputs. If you're using Virtual DJ, there's a way to change the Output to mono in the software settings. That way you won't have to use an adapter. I hope this helps.
Great question. I totally agree that using a SINGLE column array speaker sacrifices most of the spatial imaging from a stereo signal. But since both the board and column are stereo units (and I intend to get another Turbosound iP2000 speaker someday) I just run everything stereo out of principle I suppose - LOL :-)
@@TheImageDoctor Almost all live sound is mono. The problem with 'Stereo Live' is that only a relatively small percentage of the audience will be in the 'zone' of the stereo field, while most will be either right or left. If you DO use stereo, then pan most of your mono instruments closer to 'center'. For true stereo signals, connect the right and left to separate channels and pan each toward the center; IO.W., use LESS 'stereo.' If you have TWO stereo sources, then plug the left of the first into the left of the first line level ST input channel, and the right into the left of the second line level. Plug the second stereo source into the right inputs on the same two channels that you connected the first stereo source. Pan center, and you will have two stereo sources come out in mono.
@@brionbell I juuuust had that "all live sound is mono" talk with the sound engineer guy from "The Wailers" at sound check a month!!! HE said, "thats a longgg running standard / myth that I dont agree with or run." They were playing about a venue here (about a thousand or so capacity, maybe) ... he had drums (toms, mainly) and a few vocal efx occasionally panning hard l, r across the sound stage .... and IT. WAS. BADDD. ASS!!! "Stereo Live" ABSOLUTELY works ..... well!! :-)
Couple questions if you can answer them from your own experience that would be the selling point for me! 1. Whats the frequency spectrum of the console? Hopefully it at least covers 20-20khz? 2. If I plug usb into the computer, can audio go from the cpu to the Yamaha? and in turn out the main outs of the yamaha 3. The RCA "in", is that 20-20khz or better? I just don't want to lose the bass-end of what I would have plugged in right there
I'm not a "technician" and have no way to actually analyze the frequency response curves of my own unit. Also, I'm not here to ping anyone... but have you tried searching for the specs or downloading the manual? I looked (because I'm curious now that you mentioned it) and found the OEM specified frequency response (for the unit as a whole) listed as "20 Hz to 48 kHz" but I see no freq. specs specifically for the RCA inputs. As for your USB question, the board functions as "24-bit /192kHz 2-in/2-out USB Audio Interface." So yes, the USB function IS bidirectional, with the USB input signal available in the 9/10 stereo channel. Feel free to send my sales commission via PayPal ;-)
@@TheImageDoctor ok thanks. Just because ive had boards where the whole system covered the full frequency spectrum, but when you played some audio out the instrument track, you can hear there was like a 80hz roll off or something. It made it frustrating cause i couldnt plug in my bass and monitor my bass accurately
@@TheImageDoctor Hi, I got the mixer a couple of days ago and until now I am very happy with it. The sound is so clear and you can hear everything in the music. I can see that some people have said that it get's very hot, mine doesn't, not at all. I have also seen that some people are saying that the earlier models was better and they now was made in China. Mine is made in Malaysia, don't know if that makes any difference but so far so good. Thanks again for your video.
thanks alot - Im ready to retire my super heavy old Yamaha speakers and Yamaha PA Head at home! Ready to go with this MG10XU board and Yamaha powered speakers LESS WEIGHT TO HAUL AROUND easy for my back Baby Boomer friendly lol So the only diff between this and the MG10XUF are the faders which make the board a bit bigger and more expensive - not worth it IMHO - btw, Yamaha makes GREAT PA equipment my old Yamaha HAS NEVER BROKEN DOWN AT A GIG EVER!!!!!
Sweet - personally I went with a tower array (Turbosound iP2000) rather than the traditional, but more cumbersome, L/R speaker setup - but you're right: Yamaha makes great speakers too
AH makes a good mixer, and I do like the sweepable mids on that ZED board - but when doing a point-by-point comparison, the MG series is (currently) 43% cheaper, lighter, offers more functionalality, and provides industry standard 24bit / 192khz sampling as an audio interface - the ZED only provides 24b/96k sampling (which is still great and more than most non-professional musicians will ever need) - thanks for chiming in
I just bought one, for small venues, getting a lot of favorable comments on the effects on vocals, quiet as a mouse, nice and compact.very happy with it. Great review
Congratulations on the new board - I've had mine a couple of years now and still use it every day for practicing my set - its just a great little board
Great vid - I smiled when u mentioned Reverb 1 - I've had this board for years and that is a great reverb
Right ??? I mean its not ultra-lush or anything but it works GREAT as a light touch on vocals
Agreed very good do it all mixer. Use it for home recording and band rehearsals and small acoustic gigs. Super reliable and easy to use.
Thanks for sharing!
Nice mixer. I got the same board but with a 12 channel. What I love on this series is the built in compressor and its reverb effect for singing vocals. The rec out is clean. I once used this in recordings during election season.
Agreed - the clean pre-amps, compressors, and on-board FX were huge points for me as well.
I’m about to get one in 2024
Be sure to pay close attention to Sweetwater and Amazon over the next 2 weeks, as you'll probably see it on sale for under $100
@@TheImageDoctorwow really? Wow.. I came back to watch it again .. lol thanks
@@coldhardtruth333 LOL - I thought you were commenting on my Zoom guitar pedal video, and THAT will probably be on sale for the holidays :-) sorry for the confusion but thanks for coming back to watch the video !!!
I picked up my MG10XU today. I was looking at the 12 but that was just a bit to large for my space. So far so good and it sounds better than the Behringer desk it replaced. Thanks for the review.
Cool - cool - glad the video helped and congrats on your new mixer :-)
Thanks I am very impressed with the way you showed every detail with this Yamaha mg10xu thanks for the information exactly what I needed
Glad it was helpful! Sidney - it's a great board and I'm still using it today, but primarily as a "mixing" audio interface !!!
That's the main hub in my home studio. Love the sound of it. Pure, clean, natural and the USB output is stunningly good. I often see myself recording trough this desk, it's very convenient and with the fx send i use my BigSky, Deco for reverberation and tape fx for my instruments and vocals. Experimenting too with overdrive and modulation pedals as outboard fx, amazing job. I tried RNDI S before the D pre's and pushed them hard and they saturated really nice, got the nice colour from the Neve di. It's all around a great piece of kit to record on. I recommend.
Very cool - thanks for sharing your setup !!!
Are you able to hear yourself recording at same time hear playback from the computer without latency? I'm currently using a Behringer Q502USB Mixer and in order for me to do that, I had to loop rca cables.
nice concise, quality review... :)
glad it was helpful, and thanks for commenting
So agree. I've owned several small-gig mixers and yamaha has been the best -- easy to use, great sound and works seemlessly with Cubasis for recording. No regrets.
True story: I've had no regrets with this board either, it does what it does and does a good job
Looks like an excellent blend of features, especially at that price. Everyone should be very conscious of which specific features serve their own goals, because there are a lot worthy choices within a hundred bucks or so - each with a different cocktail of features. I went with an Allen & Heath ZED series, cuz I got sweepable mids EQ and integrated power supply (no honking external rat-bulge-in-a-snake). But if you value the built-in compressor more, this MG10XU is a unique choice.
Several years later.. I'm STILL using the exact same board as my primary audio interface AND for my PA system - it just works !!!
That honking snake sucks balls! That's the main reason I hate yamaha mixers.
Update:i hit buy on Amazon $209.Watched a ton of videos on this and many people hate behringer.and behringer seems to be runner up.i will swap out 1/4 in.mic cords for the xlr.this mixer is a 2014model,but people still love this
Yes, you can plug in 4 x dynamic mics (that have 1/4" cables) and you can control the reverb send for each channel
Ive bn looking at plenty reviews .... and bro!
Youuuuu just sold it! Thank you!!!!!!!!!!!!!
Awwwright :-) thanks for chiming in and glad the video helped you out
Awesome video. Very clear and it helped me work out some of the functionality of this mixer that I was curious about 🙏
Awesome - glad it was helpful, and thanks for taking time to reply
I use this with my small DJ setup. 2 Qsc k-10’s and 2 rca 705 asii. Sounds perfect
Sweet - I've been curious about people using this board for DJ'ing - thanks for posting :-)
@@TheImageDoctor the clarity, headroom and options are game changing
Hi im a Dj to and planing to get this only for Djing and not using a mic. Do you think the sound quality get a boost or better/louder/stronger sound if using this mixer over master out on lets say a Pioneer DJM900 ? Most videos on here are aboutt he mic. I dont have one and will never buy one. Wish some one on here did make a video only for Djs rigging up lets say 4 tops and 4 subs ,)
GREAT VIDEO... LOVE THE BACKGROUND MUSIC
Awesome sauce - thank you for commenting :-)
I just got one last week. Love it.
Congrats on the new pedal - and thanks for chiming in :-)
i like how you did the seven points so i can just get the cliff notes ... thanks buddy good vid
It's a great little unit for what it is - glad the video helped out :-)
My must have is PFL. So for me I have to go for the 12XU with faders . Or the 10XU with faders on.
Indeed!
I would have probably opted for linear faders if that model had been available when I first purchased the MG10XU
@@TheImageDoctor I actually ended up with Allen & Heath ZEDi10FX. Unfortunately not faders on the channels, but include pfl and fader on the master mix.
I got a question for you for a karaoke 🎤 night in my back terrace what kind of effect would you use the most from this mixer. Thanks
Personally, I use no.2 "Hall" probably 99% of the time, but no.14 "Karaoke" might offer more of what you're looking for...
@@TheImageDoctor ok number 14 is horrible I’m going to try # 2 like you said thanks.
Really nice video and very easy and simply explained and you spoke good English Thank you for your great review 👍☘️
Thank you! 😃 glad it was helpful
@@TheImageDoctor thanks for getting back to me ..do you have a link to the attachment adapter to attach the Yamaha mixer to a mic stand ? Thanks in advance for you time and knowledge .
☘️👍
@@whitefriars13 yeppers the link is in the video descriptions
I agree! Great little mixer!
Yep, the entire MG line is a great series of mixers
Could you hook up your subs on the auxiliary
Unfortunately, there is no dedicated output for subs - all outputs on the board are the same mix signal, although the monitor/headphone and mains have separate volume knobs - so yes, you can hookup subs directly to the board if there is a crossover in the chain
I love it. just ordered it.
Hey Opus Love - did you get your unit yet ??? How do you like it ???
@@TheImageDoctor It's a gift from my girlfriend so I won't know 'till Christmas.
You need the sweepable mids. A reason why I’m upgrading to Allen And Heath 10FX
Where would you hook up your subs on that mixer
When I had the TurboSound IP-2000, I ran directly into the speaker because it had a built-in crossover - when I upgraded to a 3-point TurboSound system, I added a dedicated crossover (used on craigslist) between the board and the speakers
great breakdown thanks
Thanks bro :-) appreciate the vote of confidence
did you forget to mention the USB Audio interface or did i miss it because i was fast forwarding :)
It's a fair point... the USB enables use as an audio interface which IS a big plus for the board and deserves mention - but it's only 2-in/2-out (i.e. stereo both ways, not a true "multi-track") and I already had a decent multi-track interface, thus my "reasons why" are more related to mixing live sound in rehearsal settings and from the stage in small venues - so absolutely: use as a USB audio interface is worth noting... it just wasn't one of the big reasons I chose the board
The Dub Reggae music you have playing in the background made me wonder if this mixer could be used to do Dub Reggae style mixing with this one. But the bigger version with the faders (MG10XUF) would probably work much better for trying to do that kind of thing I guess. 🤔
Yup, faders are probably better for that application.
Great review. Thank you
Thanks Eddie - glad it was helpful :-)
Although it doesn't seem that you use the USB/innerface, but I wanted to mention that it does have it and can connect to a computer.
Absolutely correct Maramind - the MG10XU is also a terrific 2-in / 2-out USB audio interface with 24-bit / 196khz sampling - thanks for chiming in :-)
What a great video!! I can feel the positive energy coming from your voice! great vibes... Do you know if there is a way to connect this mixer to my home theater system? I don't have powered speakers ... thanks for sharing
Certainly you can... just use this (type of) cable to connect the 1/4" main outputs from your mixer to any L/R (i.e. red/white) RCA input jacks labeled "Phono" or "Aux" or "CD" input on (the back of) your home theater system: amzn.to/3Rr1KS3
@@TheImageDoctor thank u so much.. my tv ,which i intend to connect to the mixer has an optical output for sound. Could u pls recommend a product i could use to connect it to the mixer?
@@mannyfilmsinc to go from digital-optical audio into the board, you will need something like this: amzn.to/3ym7Av8
Thx. It's a shame they don't make rack ears for the 10XU...
It would be a neat option - FWIW, I literally still have mine on the same mic stand + adapter since I made that video LOL - it's just super hand to have right at your fingertips when standing up playing 👍
i think this is the one i need thank you good info..
Thanks for commenting and I hope the unit works well for you!
100%. Couldn't ask for more ! Cleaner than the Mackie
great review thank you! I use the board and love it!
Thanks Peter - glad you liked it
I have this MG16XU...nice time tested brand.
yeah in terms of quality equipment, Yamaha is on the better end of the scale pretty much across the board (IMO)
Excellent video,thanks !!!
glad you liked it - thanks for commenting :-)
Got this coming tomorrow. Hoping I can connect, Yamaha RX11 drum machine, Yamaha ex7 synth, Roland ju 06A boutique, Juno di synth, Roland d550 rack synth and Roland d70 at the one time? Don’t use mics recorded myself singing once and heard it back and realised best not to do that again haha!
Sweet - yeah, I wish I was a better singer too - LOL - but you should have a great setup w/ the MG10XU board - did you get the mic stand mount too ???
Does the master have a limiter on it?
There is no form of gated "limiter" on this board (other than the HPF's I suppose)
ch.1 + ch.2 do have one-knob compressors, but there is no limiter / compressor of any kind for the master send
I bought a QSC and glad I did.
QSC makes a great mixer - I still use this Yamaha every day for practice w/ my PA system, but have been leaning toward a Zoom Livetrack unit so that I can run live sound and capture multi-channel recordings simultaneously - just need to figure out a good mic stand mount for it...
Great video
thank you, and thanks for taking time to comment
Great
Nice way to explain
Thank for posting - glad the video was helpful
Good highlighting of features.
May consider one myself in all seriousness.
To be honest - an external PSU is not an exclusive to smaller "home studio desks" (I only say this as it's not likely to be found pride of place at Abbey Road, for example).
I've had desks that were bigger in format, features and price range...
Which still had an external PSU.
Power supplies are notoriously noisy and kick out quite a bit of interference - which can and will have an adverse effect on overall noise from a desk...
As well as being bulky things adding to size format
Great points ^^^ thanks for posting and glad you like the video
Excellent video content.
Much appreciated - thanks for letting me know it was helpful :-)
Thank you for the video. I got one and it does a great job. I’m using GarageBand and have a lot to learn. The mixer seems pretty easy too use I just have too learn how to use GarageBand better. Great unit.
Glad the video helped and congrats on your new board
Where did you pick yours up from? Any suggestions on where to start my search?
shoots I forgot which one this very well done video was a review of :D I'm really drawn towards the Emu MP7 & XL7 this will be my first time setting up to make my own music and diffe3rent video
Who is best sir... Yamaha mg10xu or mackie profx10v3
Which is "best" ??? Hard to say - they are VERY similar boards w/ almost identical specs - two notable differences: The Mackie is a 2-in / 4-out audio interface, where the Yamaha is a 2-in/2-out... The Yamaha has a mic-stand mount, the Mackie does not - both are good boards, I'm sticking w/ my Yamaha
@@TheImageDoctor Lot a thanks sir.
Fantastic video!! Can you recommend cheaper mixer that has battery power for busking
I'd bet there are mixers that fit the bill all over Amazon, but none that I know of with the features, functions, and build of a the Yamaha unit.
It's best to create a mobile power station using one or two car batteries and a voltage converter. This will power the mixer and your powered speakers. I've seen DIY solutions that have costs that are just slightly greater than the batteries themselves.
and since we are talking about sensitive electronics, its probably best to get a converter that produces a true sine wave (JM2C)
Very useful. Thanks
I'm really glad you found the video helpful. Thanks for posting!
Hello sir. Thank you for the video of this unit. The XLR outputs are what I'm after as well... Quick question though... Can you use BOTH the XLR AND 1/4" TS outputs altogether ? I.E. - 4x outputs.... ?
Yes you can run XLR and 1/4" outputs at the same time - they're both "live"
This is the best review of any product I have ever seen. Two thumbs up! 👍👍
Thanks Chuck - I really appreciate it - I'm working on a new video now that should be ready in a few days!!!
@@TheImageDoctor
Thanks for the reply. Well you go into a lot of detail without going way off topic, or deviating from understandable English. Seems a rare quality in YT reviews! (Also visuals are super clear and the mounting feature for mic stand is something the product specs would often miss out, but such a useful feature!)
Buuut since your here...haha, I did have one question about this mixer that maybe you might know? (Yamaha's specs seem a little hazy on the AI detail). It has a 2 in/2 out Audio Interface, you say.
So if have 2 mics and 2 guitars plugged in, and connect via USB to my DAW...will this show as 4 separate tracks in my DAW, or 2 channels will share 1 track each?
Also (kind of separate but) the 2 analogue outputs are XLR, but there are 2 standard 1/4" outputs below it. All 4 can be used simultaneously, or only 2 outputs can be used?
Thanks for any help. I have 'subbed', and look forward to the new video!
What is the title of backround
Don't know - it was free music from UA-cam
Nice Review, Is USB help to use as Audio Interface? Thank you so much.
Yes, the USB connection is for use as a 192k/24bit audio Interface
@@TheImageDoctor Thank you.
Totally agreed ... MG10xu.. 👍🧡
whoop-whoop :-) thanks for posting
Nice review. I know you said that you can't mix/combine effects, does that mean you can only use one effect across all the channels or can you use for example reverb on channel 1 for voice and chorus on channel 2 for guitar for instance. I just ordered one but I thought that I would be able to use effects individually on all channels. Thanks for review and response. Andrew
Correct, the single effect selection / parameter is for the entire board - though of course you can dial the effect "level" on each channel individually. Great quality effects for a small board, but with limited utility beyond general PA use.
@@TheImageDoctor Thanks for the reply. I bought one and its nice, though I wish I could put reverb on voice and chorus on guitar. Wound up using chorus pedal which I guess is no big deal. I did want to keep it simple, but also I could not find anything comparable for the price. Thanks again.
Cool - I basically do the same: pedal FX for guitar, on-board FX for vocals
Good mixer but I sold mine as the power supply was too big and there was no aux mix to do a monitor mix
Good points really would be nice to have an aux mix
That giant power box is a no-go for me.
Can you plug instruments into channels 2-4?
Absolutely 👍
@@TheImageDoctor especially with balanced cables or any other external units like an amplifier?
@@mjb12ification I mean sure, they're just combo XLR+1/4" inputs w/ pre-amps and PAD switches, so they should work - only difference w/ ch.3+4 is they don't have 1-knob compressors like ch.1+2...
Would I need a di box for going direct into it for a acoustic guitar?
You shouldn't need a DI box if you're running the guitar into ch.1-4 since those have preamps built in - but there are many reasons you might prefer using a DI, such as more tonal control (than the board offers) and running the guitar into ch.5-10 which do not have pre-amps - I use a LR Baggs Paracoustic precisely for these reasons
The Image Doctor thanks mate 👍
U r lucky guy....u got the BMS 10 adapter for stand with d board....but Amazon is selling it for $60..in Indian currency. .n that's quite expensive.
Dude - that sucks, but glad you got what you needed
@@TheImageDoctor thnx 4 ur reply Sir !
Hello bro..What is the title of your backround music??
Well, THAT is a good question... I'll have to look back in my files
Hey! Great review, i just had a question..where can i buy the mic stand adapter? Ive looked for it all over and cant find it on the internet. Can you leave a link to where i can get one? Thanks!
Hmmmm - sorry about that. I suppose a link would help - LOL (and now added to the description)
Model no. BMS10A: www.sweetwater.com/store/detail/BMS10A--yamaha-bms10a
@@TheImageDoctor thanks! Gonna buy one now!
can i connect this mixer to my digidesign 003 rack ?
Sure - you can go from one or both (L/R) of the XLR outputs directly into your DD003 rack unit. But there's no way to connect them via USB or other "digital" connection.
@@TheImageDoctorthanks so much.. so I can use 2 1/4 balanced cables and go from stereo output of yamaha to line input of 003 right ?
@@VOICEOFCHRISTJESUS Yeppers - personally, I prefer using the XLR outputs on the MG10XU, but the 1/4" outs are just as good
@@TheImageDoctor ok right now I have my studio monitors connected to my 003 rack..once I get this mixer..I 'll connect the monitors to my mixer ..that's good I think..
Awesome video man!!!!
Do you think the preamps are enough for a dynamic mic like the shure smb7?
That's a great question, and I don't know - my guess is it would "work" but based on the little I know about that particular mic, something like a Cloud Lifter would definitely be worth considering
Thank you for a great review! I’ve narrowed my search down to this mixer, the Behinger xenyx 1202fx or an Allen Heath Zed 10fx. It would be used live for a male and female vocalist and a Denon dj controller as well as a keyboard. I would also need to connect an iPad for some additional backing tracks. I would appreciate any input?? Thank you.
Yamaha mgp 12x is perfect for what you want to do, it’s a bit more expensive but well worth it if you can stretch to it, you might even pick up a good used one on eBay
Agree w/ geespar1... the Yamaha is perfect for the type of setup you're talking about
how about Noise?
For live sound, noise is not an issue - however, there is a particular combination of settings to use when operating as an audio interface to ensure the preamps aren't maxed out (which introduces noise)
That compressor alone is worth the money!💯
Indeed - just wish there was one on all four of the XLR channels
Are those RCA phono inputs on the board and would they allow me to route my vinyl player through the mixer?
Yes, and Yes - as long as your turntable has a line-level signal, which most do
@@TheImageDoctor Thanks for the reply mate. I just ordered this mixer and I am going to connect to my PC for recording into my DAW which is Cubase Artist. :)
Mi mezcladora se calienta en la parte de atrás. Y siento es una temperatura excesiva, es normal ?
Sí, es normal que el panel trasero se caliente mucho (estoy usando el traductor de Google)
You forgot to mention its a 24-bit/192khz Audio Interface. And is also compatible with iOS devices.
Yep, you're the second person to remind me about the 24bit / 192khz spec as an interface (thought I had replied to a previous comment, now I can't find it)
Anyhoo... you're right: 24/192 is arguably the "industry standard" for digital interface sampling, although many other devices, especially lower-end audio interfaces, only offer 24/96 - which is still great, but the fact that the MG10 offers 24/192 sampling is AWESOME and provides 256x more resolution (i.e. sound quantization) than "CD quality" sampling, which is 16-bit / 44.1khz
Thanks, for the video, I just purchased this Yamaha board, do you have a link to purchase the mic stand adapter?
Yeppers: www.sweetwater.com/store/detail/BMS10A--yamaha-bms10a
@@TheImageDoctor Awesome thanks!
It will manager 4 condenser microphone at the same time using 48v phontom power???????
Yep - channels 1, 2, 3, and 4 have 48v phantom available
@@TheImageDoctor Well this is the reson I ask. The one on the video have 4 preamp but Can not manage 2 conderser mic.
ua-cam.com/video/xVAXk-3gvlg/v-deo.html
Hi.
I have a question.
What's tha better mix, MG10 xu, or MG10XUF?
while I like linear faders on the XUF, I like the XU's smaller size and ability to mount to a mic stand much better
You mentioned that the pre-amps are not particularly warm. Any tips on how you fix that. It's becoming a deal breaker for me. I have a basic 4 Channel mixer that gives me a nice warm vocal. Hard to switch to yamaha despite the extra features.
Great point... maybe I should have said it like this: IMO... the Yamaha pre-amps don't "color" the sound, so I'd describe the sound as more "clean" than "warm" - of course these are all subjective terms anyway, lol - as for "warming up" the sound, mic selection and speakers have a lot to do with the final "tone" and can certainly warm up the overall sound, but apart from rolling up the low-end a tad or using the chorus FX, there's not much else to be done on the board itself to "warm up" the sound
Use the high cut on the eq and the mid range.
Hello... im using this. But im facing one problem. After using 5 - 10 min it gets very hot. Is it normal ?
Unfortunately, yes - that IS normal for this board
Can you use the Mic/Line for Speaker connection too?
Probably not directly, it requires a live-level input - but I never tried that lol 🙃
Check out the Livetrak L8. A lot of value for the buck.
Thanks for posting a reply KEV - I hadn't seen that Zoom board before - looks AWESOME
What’s the model from behringer you were referring to ?
At the time, I was referring to the Xenyx series - but quite a bit has changed in the past few years
@@TheImageDoctor our band goes in ears but I have a problem with switching in ear monitors all the time and I don’t want to ruin the mix for everyone every time I EQ the mix . If I lower mids it’s for everyone . So I was thinking of getting a Yamaha like this one and linking it to the mixer so I can get to EQ and not affect anyone else . Is it possible ?
@@Parkster44 sorry... I don't understand what you're asking about the MG10 in regard to your band's in-ear monitor use ???
@@TheImageDoctor do you have a fb page ?
@@Parkster44 Nope - but I manage several LOL !!!
99% of people will use the effects once to try them out and then never again.
I agree the FX aren't "studio quality" and are best used sparingly - but when you need to add a little depth and spaciousness to your mix, having SOMETHING on-board to work with is much better than having nothing. But to your point: the FX could certainly be better. Personally I'd be ok with the existing quality if there were simply a few combination options available (i.e. chorus + reverb)
@@TheImageDoctor I am not commenting on the quality as i have not tried it but practically nobody who uses this mixer is going to be using these effects apart from a curious tweak at the begining.
@@inspectahfragile9507perhaps you're right - I use the onboard FX and like I said, it's better than having nothing at all
What?? The chance to apply a little reverb or delay on vocals is always convenient! Specially on a budget.
Reverb 1 - dial it up and it's a wonderful reverb
Regarding power supply does it run on USB too?
Nope, it must have the power adapter that came with it or same type
love the reggae
LOL - thanks, some people don't like the music but I think it helps a little
Thanks , do you know of the little one Yamaha it's good too?
As a super-small live sound mixer, the MG06 reviews are virtually all positive - the smaller MG06 does have the mic stand adapter and seems to be a favorite of keyboard players - but the smaller board doesn't have the 1-knob compressor and does not function as an audio interface, so it's a one-trick pony (live sound)
@@TheImageDoctor thank you so much for the information and reply.
Is there an decent external vocal delay stomp box that you could add
so you get reverb and delay, without having to add a full featured
vocal processor?
There are several, but if you're gonna spend another $100+ to run a dedicated piece of hardware via the FX loop, the stereo M100 from TC Electronics seems like a good fit at $125 - I don't have one but it's small, flexible, and reviews say it sounds great: www.sweetwater.com/store/detail/M100--tc-electronic-m100-stereo-multi-effects-processor
Great video! Any tips on vocal pedals to compensate for the non addition of dual effects? Thanks Sean
Thanks for the good word :-) and Yep... vocal pedals range from $70-$800 new - and do make sense if using this board for live performance.
Personally, I grabbed a used Harmony G-XT unit from TC Helicon. It offers pitch correction (via your guitar input), vocal doubling, multiple harmonies, and basic FX for both voice and guitar. You can even use it as an all-in-one-plug-n-play solution for the solo singer/songwriter guitarist inside you.
Check my other video at 38 min,35 sec for a few words on that pedal...
ua-cam.com/video/CSqoJA8OY7M/v-deo.htmlm35s
As far as equipment options go in general, that video is also my personal quest for value and flexibility, all wrapped up in an "incremental" equipment plan, w/ multiple phases and price points, beginning at $100.
It's kinda long, but I tried to keep it interesting - lol...
Here's the most inexpensive option I can find ($123 new) to "upgrade" the on-board effects via the FX loop: www.sweetwater.com/store/detail/M100--tc-electronic-m100-stereo-multi-effects-processor
It only has two "combo" effects, which is a bummer, but ALL of the effects are definitely a step up in quality from the MG10XU's on-board options.
@@TheImageDoctor Thanks so much for all your advice. This has really helped me. Cheers Sean
Should I replace my behringer QX1204USB to these?.. Mine have plus like Klark teknik effect, all channel have Compressor.. Tnxx... Is it worth to change this Yamaha??
Each mixer has its good points - the Behringer has a few MORE features, the Yamaha has better QUALITY features - which is right for you just depends on what you're looking for
A big limitation of this mixer IMHO is the lack of a pre fader auxiliary send for running stage monitors. B
Hard to disagree - having just one (L/R) "send" signal for mains AND monitors/phones does limit the uses of this mixer - thanks for chiming in Mad Ness
This one sells for $200+ on Amazon. MG12XU sells for $400. Is the latter worth the price?
IMO, the MG12XU is 100% worth the price. *IF* you want a physically bigger board that sits on a desktop (no mic stand adapter), and you want (2) more primary inputs with in-line compressors, and you want channel faders (instead of knobs), and you want a LOT more routing options for live sound and recording - HOWEVER... based on your question about PRICE point and not specific features and functional differences, I'm guessing the MG12XU is probably NOT worth the extra money in YOUR situation
I bought one of these used and guitar center today. There is something wrong with the left main out put bus so I am taking it back but it also has one of the worse frequency responses I've ever heard in a mixer which is stunning to me because i have bunch of other Yamaha stuff and its great. It sounds like its got some impedance issue but I tried out all possible variants of balanced/unbalanced, line, mic whatever and the issue persists.
I've never heard of THOSE particular issues with THIS particular board... but dude, that's really frustrating!!!
You go out during CV19 (which is an ass-whip in itself) and spend your hard-earned money with a reputable retailer for a brand new / brand name audio mixer that has overwhelmingly positive reviews online. You DESERVE to have the SAME experience. But you don't. Your particular unit turns out to be, for whatever reason(s), completely unusable. That sucks (!!!) and I can totally identify man - I've been there myself. Not with this piece of equipment, but with others.
Obviously this channel can't make things "right" for you - only Guitar Center can do that - but I understand the desire to post something somewhere about your personal experience. (When things go sideways like that for me, I often do the same thing - lol.)
If there IS anything positive to be said... at least you can take it right back to GC for exchange or refund. (Maybe that unit had been returned previously and accidentally re-stocked rather than being returned to Yamaha.) Yes - returns are a major hassle and you shouldn't HAVE to do that. But again (AFAIK) the MG10XU is NOT known for the the issues you're reporting so it's a pretty good bet that switching it out for another brand-new unit will fix all the problems. I bet GC will even let you A/B your existing unit side-by-side w/ another brand new MG10XU, just to make sure you're getting a good one (and make sure they know about the bad one too.)
FWIW, I had band practice this weekend using the same setup in my follow-up video with zero issues. We jammed for nearly 3 hours (running various combos of guitars, vocals, and a play-along track all night long) and the Yamaha MG10XU operated perfectly. As a matter of fact, the back panel was hardly even hot to the touch at the end of the night. I mention all this simply as validation and encouragement: the MG10XU is a good piece of equipment. Pretty sure you just got a bum unit from GC.
I see an FX send for external FX but I don't see a return input. Where does it go and how do I apply it to the tracks?
Good questions... The FX loop uses a single TRS insert, where send/receive signals are separate but they have a common ground. The same FX master and channel sends work for the FX loop.
@@TheImageDoctor Thanks for the reply! So I could use a splitter of some kind to run, say, an FX pedal? Or just run the FX out into a separate channel?
@@TNTales yes, and I think you can also use the 1/4" TRS inserts on ch.1-4 if you only want FX on that particular instrument or signal
@@TNTales if I understand the question... yes.
I am confused between berhinger 1204 USB and Allen & Heath zed i10 FX and this Yamaha mixer . Plz advise
Sure thing... my "advice" is: Get the Yamaha MG10XU :-)
The Image Doctor thanks mate
Can u plz advise best microphone with this mixer suitable for home karaoke and recording ?? Also advise on wired or wireless , which one ll b better?
Can we connect it to a camera?
Yes - if you have the right cables / connections.
Does the Soundcraft notepad-12fx better than this Yamaha? Thinking of getting either one for a 4 mic drum recording setup...
I have no experience w/ that Soundcraft board - I've used the Yamaha to mic drums but would have liked to have at least 6 x XLR inputs to do that - JM2C...
Is this a powered mixer?
The MG10XU does NOT have onboard amplifiers - i.e. it is "unpowered." You will need powered speakers.
Is headphone out good ?
I mean... it's a headphone out, L/R stereo mixdown of the multi-track signal - so I guess it's "good" (???)
when you say it's 2 in 2 out mixer, that means that you can record master left and right tracks into a DAW? so not like recording separate tracks for each channel? thanks
Correct Samuel. It's NOT a true "multi-track" recording interface, just 2 tracks (i.e. L/R stereo) from the computer into the board, and from the board into the computer.
@@TheImageDoctor thanks for the info!
When you go from your (L+R) xlr outputs to your speaker column, do you use just one xlr and go mono? If not, what is the benefit of going with 2 xlr’s if you only use the one speaker?
It all depends. If your only outputting live instruments, you can just use one XLR cable, since both signals (R + L) are the same if you leave the left and right knob at 12 o'clock on the mixer). Now, if you have a stereo signal from an Laptop (or any other stereo source), you need to use a Y adapter, that goes from L & R, to one XLR, that would then go to the single speaker. Or, you can run two XLR cables if your speaker has 2 XLR inputs. If you're using Virtual DJ, there's a way to change the Output to mono in the software settings. That way you won't have to use an adapter. I hope this helps.
Great question. I totally agree that using a SINGLE column array speaker sacrifices most of the spatial imaging from a stereo signal. But since both the board and column are stereo units (and I intend to get another Turbosound iP2000 speaker someday) I just run everything stereo out of principle I suppose - LOL :-)
@@TheImageDoctor Almost all live sound is mono. The problem with 'Stereo Live' is that only a relatively small percentage of the audience will be in the 'zone' of the stereo field, while most will be either right or left. If you DO use stereo, then pan most of your mono instruments closer to 'center'. For true stereo signals, connect the right and left to separate channels and pan each toward the center; IO.W., use LESS 'stereo.' If you have TWO stereo sources, then plug the left of the first into the left of the first line level ST input channel, and the right into the left of the second line level. Plug the second stereo source into the right inputs on the same two channels that you connected the first stereo source. Pan center, and you will have two stereo sources come out in mono.
@@brionbell Cool beans and thanks for the detailed follow-up :-)
@@brionbell I juuuust had that "all live sound is mono" talk with the sound engineer guy from "The Wailers" at sound check a month!!! HE said, "thats a longgg running standard / myth that I dont agree with or run."
They were playing about a venue here (about a thousand or so capacity, maybe) ... he had drums (toms, mainly) and a few vocal efx occasionally panning hard l, r across the sound stage .... and IT. WAS. BADDD. ASS!!!
"Stereo Live" ABSOLUTELY works ..... well!! :-)
Couple questions if you can answer them from your own experience that would be the selling point for me!
1. Whats the frequency spectrum of the console? Hopefully it at least covers 20-20khz?
2. If I plug usb into the computer, can audio go from the cpu to the Yamaha? and in turn out the main outs of the yamaha
3. The RCA "in", is that 20-20khz or better? I just don't want to lose the bass-end of what I would have plugged in right there
I'm not a "technician" and have no way to actually analyze the frequency response curves of my own unit. Also, I'm not here to ping anyone... but have you tried searching for the specs or downloading the manual?
I looked (because I'm curious now that you mentioned it) and found the OEM specified frequency response (for the unit as a whole) listed as "20 Hz to 48 kHz" but I see no freq. specs specifically for the RCA inputs.
As for your USB question, the board functions as "24-bit /192kHz 2-in/2-out USB Audio Interface." So yes, the USB function IS bidirectional, with the USB input signal available in the 9/10 stereo channel.
Feel free to send my sales commission via PayPal ;-)
@@TheImageDoctor ok thanks. Just because ive had boards where the whole system covered the full frequency spectrum, but when you played some audio out the instrument track, you can hear there was like a 80hz roll off or something. It made it frustrating cause i couldnt plug in my bass and monitor my bass accurately
Great review thanks. I just bought one but it can take a while before I get it because of the Covid19 Virus :(
Hope you are ok.
Chime back in when you get your board - let us know how you like it
@@TheImageDoctor I will. It looks like could get it today :) By the way, I bought the one with faders because I like that better.
@@TheImageDoctor Hi, I got the mixer a couple of days ago and until now I am very happy with it. The sound is so clear and you can hear everything in the music.
I can see that some people have said that it get's very hot, mine doesn't, not at all.
I have also seen that some people are saying that the earlier models was better and they now was made in China. Mine is made in Malaysia, don't know if that makes any difference but so far so good. Thanks again for your video.
thanks alot - Im ready to retire my super heavy old Yamaha speakers and Yamaha PA Head at home! Ready to go with this MG10XU board and Yamaha powered speakers LESS WEIGHT TO HAUL AROUND easy for my back Baby Boomer friendly lol
So the only diff between this and the MG10XUF are the faders which make the board a bit bigger and more expensive - not worth it IMHO - btw, Yamaha makes GREAT PA equipment my old Yamaha HAS NEVER BROKEN DOWN AT A GIG EVER!!!!!
Sweet - personally I went with a tower array (Turbosound iP2000) rather than the traditional, but more cumbersome, L/R speaker setup - but you're right: Yamaha makes great speakers too
Those faders are very woobly, better go with the XU model
Hi.. It is suitable for jamming studio?
Absolutely!!! Checkout my follow-up video to see it setup for "jamming" ua-cam.com/video/QRsNOuQykuo/v-deo.html
Is it better to connect to a DAW using the USB on the back or connecting using an audio interface?
This IS an audio interface, so just use the MG10XU via USB connection
The Zed 10FX is my choice
AH makes a good mixer, and I do like the sweepable mids on that ZED board - but when doing a point-by-point comparison, the MG series is (currently) 43% cheaper, lighter, offers more functionalality, and provides industry standard 24bit / 192khz sampling as an audio interface - the ZED only provides 24b/96k sampling (which is still great and more than most non-professional musicians will ever need) - thanks for chiming in
How does this compare to the rcf 10xr
No idea - I don't have one of those...