Good thing I watched, I had parameter control almost off and was wondering why my effects were so strange…I’m watching all these vids! So far love my new Yamaha!
Realize I'm late to the show but hey,.. I'm old, lol.🤣 Been over 30 years since I've done anything in this realm but your videos helped me pull the trigger on a Yamaha MG12XU!! Thanks for explaining everything in detail. Nice to know that the only real significant changes in mixing/studio are the options, features available at a lower cost and the implicating computers and interfaces into the workflow. Makes everything so much faster and easier to teach my daughter!
We live on channel 13 in my band with Mic Mechanic 2 pedals on each mic ahead of the board in signal chain. We have access to so many effects but this little board on channell 13 gives us our killer vocal sound. Love it.....
Thank you so much for the video!! I gotta say, your videos helped me a lot in deciding to purchase this mixer. After 3 months of heavy use, I’m super happy with it. The FX engine is awesome, Yamaha has it super dialed
Tough time choosing between the Mackie ProFX10v3 and the MG10UX, but the effects parameter knob was the thing that pushed me toward the Yamaha. Also, I REALLY like the compressor circuit. Sounds and feels like a real compressor, as opposed to just being a limiting tool. Only thing I'm left wanting is Mute buttons. MG12UX is a likely future purchase!
Please I tried using your Yamaha products for a long time. Was very satisfying results. P90 spent 2 Grand with those people to get any kind of a equalizer on their mixers. I do not only dislikes Yamaha mixers. I don't think I would be misleading people to get I'm not to purchase one. I look at it as a piece of junk
Hello, Kettner, a question here. Yamaha MG10XU is better than Scarlett Solo 3rd gen in terms of sound? I found the scarlett to be way too rudimentary, I mainly want to use a mixer or interface for voice acting and light singing, so my only concern regarding Yamaha MG10XU is if the sound is at least equal or better than scarlett solo 3rd gen. Also, do you think Yamaha MG10XU is at the same level / better/ worse than Soundcraft Notepad-8FX?
As a 1202FX former user, I was hoping the Reverb effects would sound more natural and smoother, I didn't really like those that much, unfortunately. This was the deal or break for me, I guess I'll have to look into another mixer option.
Hello again! Really following your videos!! I would have 2 questions..if I may: 1- can you apply one effect on channel 1 (for ex.) And a different effect on channel 2, Both at the same time .. 2-is ther an equivalent mixer, with better effects? And one with more ? Thank you!
@@kettnercreative Is it possible to set different FX on each channel or the same fx will be added to the all channels ? I mean let’s say Reverb for channel one for singer1 and delay for channel 2 for singer 2 and so on for instruments.
Hey great video. I would love to hear some long sustained notes on some of the effects - I think it would make more sense, like in say flanger-. I know you did hold on to some notes on some cases, just not on every effect. Anyway, many thanks for the video AND the channel. I have not come across any video of the yamaha or mackie consoles that come with faders. I realise that faders are susceptible to damage - is this why you do not buy/use these mixers in your business, or is it simply an issue of the elevated price range? From what I understand you rent out audio gear, so I assume the main concern would be to have gear that performs well overtime. Anyway, would be interested to see reviews of gear that has faders on, rather than just knobs.
Would like to ask please is the FX Send of the MG10XU stereo or mono? Would like to connect Strymon BigSky that is stereo. If not stereo, what mixer do you recommend that I could connect stereo effects? Thanks for any help.
Does an effect applies to all channel simultaneously or is it individually?..i wouldnt want to hear both my guitars and my vocals having distortion..hehe .seriously mate how does it work?👍👍👍
nice video mate, just quick question, where did you connect your mg10 audio out, is that direct to speaker or you connect to usb going to laptop, hope i fet the answer mate, thank you.
I have a MG10XU. We use it as part of our set-up for Karaoke. Works great, but I'd like to utilize the USB feature. I'm an analog guy trying to embrace the digital world. Can you provide any details on the USB feature?? Right now, I want to output the mixer to my iphone for recording. Can you help an old guy out??
Thanks for the video. Can it have a separate effect for mic vocals and separate effect for my instrument channel? If I select an effect, will it apply to my Bluetooth music too, in case I am doing karaoke? Thanks
I'm guessing you're only have to have one effect being used at a time, right? So you can't, for example, have the Reverb to the voice channel and the Phaser to the guitar channel, right?
Hi thank you for this video. I am planning to buy this mixer. Two questions please.... when you have for example effect 3 activated and you switch off the device, when you turn it back on does it remain on the last effect you used or starts from effect 1? Does the monitor/phones pot affect the Stereo Out when turned? Thank you!!!
Do I have a bad unit? I've found that line 5 to 10 are extremely low in volume even when maxed on the mixer. Even with the audio equipment (keyboard and computer) outputting max volume to the mixer. Also, the sound quality is degraded by the mixer compared to connecting headphones or speakers directly to the audio equipment. Even through lines 1 to 4 with gain at neutral and volume at 12. Am I doing something wrong? this does not occur with my two older mixers. It shouldn't be this complicated
Sir i don't want to make this live video from yamaha mg10xu mixer. I want to record audio and video simultaneously in camera. Will it be possible or not reply me and how will the sound be. Will you like it or not, please give some reply!
Dumb question, maybe... But if you don't turn on the FX engine will the signal come through as normal? If I turn up the FX knob on the mic channel will it act as a separate signal for example?
Thank you very helpful. But I am debating weather to buy this mixer or the mackie profx10v3. I’m mainly buying them for the effects. Can you make the same video but for the mackie profx10v3? Just going over the effects the same way you did here. That would be very helpful. Thank you.
Hi Jordan , I’m just purchased this mixer to use for my acoustic setup .. so far I love it but I use the headphone jack for an inner ear monitor while I’m playing .. I use some reverb to sing with but is there anyway to not get the reverb through my IEM ? It sounds fine through the speaker but in my ear it’s just too much and muddies the vocal too much and it’s hard to hear if I’m on pitch .. not sure if I explained that right . This is a great channel, thank you for the help !
Hi, great vid!! Could you tell me please, can a tc helicon mic mechanic 2 be used as an external effects with this unit in the effects send? If so what wires would i need? Many thanks Sean
Hello, first of all, thank you for informing us like this, I have a question, I am broadcasting live on TikTok, can I connect the device to my Android phone, thank you.
can you select more than 1 effect for each channel? can you select different effects for each channel or the effects apply to all the chanells equally?
I didn’t quite understand one thing… if I have a bunch of synths connected to the mixer and use the built in fx, and want to add an exterior effect pedal to the ‘send’ does it cancel out the built in effects or can I now use both at the same time?
Better late than never. If you want better quality, go with Yamaha. The Mackie brand was bought out by a venture capitalist firm and they are using subpar factories and cheaper components. You are lucky if you get a good Mackie board these days, even read about a lawsuit from a few people and Mackie ignored it. I wouldn’t support a venture capitalist company just trying to make a quick buck before dumping the brand on the next sucker investor.
Hi, Vocal Echo or Stage efects are made by Yamaha using a combo from reverb with delay ? I ask you because other brands use multi-fx like delay+reverb wich is most used by singers
Hi Jordan, your videos are super helpful and helping me a lot to decide what mixer I should get. I am a singer and want to record songs from home. I am leaning towards the Mackie ProFx6v3. I do not want to invest in a pedal just for the harmony which is really useful. Is there any mixer that has the basic harmony effect?
analog chorus is something that might cost as much as the mixer itself. i just spent 150 for an analogue ebs chorus unit and i was very happy with that price. pedals are very cheap these days tho, so if you were really hell bent on a harmonizer (obviously you can harmonize w urself using the mixer anyways, but its definately 2 different things) you could probably find a quit reasonable pedal that funcitons well for between 50 and little over 100 bucks
I am considering buying this Yamaha mixer for my live jamming . Equipments include 2 mics , 2 ACCOUSTIC amps ( AER and Fishman). I want to have the 2 mics (in) through the mixer and out to two acoustics amp such that the guitar and blend in with the voice coming out from the 2 amps . Note : the 2 ACCOUSTIC amps are standalone features good enough for the usual one mic one guitar ( voice/ Singing) come in /out from the same amp ……a friend advised no need to go through the mixer this way. I am confused . Can you give me some advise Thank you ver much Kettner
I just got the MG12XU, but need a step-by-step for engaging the in-board effects. the manual confuses me! The manual says FX goes through AUX1, another UA-cam video says FX goes through AUX2.
many thanks for this great video. Can you tell me if i can have one effect for the mic and a different effect for the guitar at the same time. Many thanks.
I just got one of these cuz I love my Yamaha mixer, EMX212s. But the same mic with the same cable has considerably lower audio quality. Sounds good on the Old one but this new one it sounds pretty crappy. Is it because it's a digital USB signal? Is that possible? The old one is analog and the new one is digital. I'm just wondering if my unit is defective. Also i have a condenser mic that doesn't even work on the New yamaha , with the phantom power on of course. You seem to be the master of this mixer so i thought I'd ask. Thanx again, love your channel
@@kettnercreative Ive used the Yamaha for many years. As a solo musician playing all kinds on genres. I use the Karaoke. Not sure if it's the best choice tho
i had my controler plugged in CHNL 3 and CHNL 4 and the signal was peaking distorted will it be ok to plug my DJ Controller in the 5/6 CHNL Unbalanced channel ?
Good thing I watched, I had parameter control almost off and was wondering why my effects were so strange…I’m watching all these vids! So far love my new Yamaha!
Realize I'm late to the show but hey,.. I'm old, lol.🤣
Been over 30 years since I've done anything in this realm but your videos helped me pull the trigger on a Yamaha MG12XU!!
Thanks for explaining everything in detail. Nice to know that the only real significant changes in mixing/studio are the options, features available at a lower cost and the implicating computers and interfaces into the workflow. Makes everything so much faster and easier to teach my daughter!
I am really glad you are doing this, you helped me a lot .. thanks dude from the bottom of my heart, keep it up bro
Happy to help
100% 👍. Super Thank You!
Thank you so much!!
We live on channel 13 in my band with Mic Mechanic 2 pedals on each mic ahead of the board in signal chain. We have access to so many effects but this little board on channell 13 gives us our killer vocal sound. Love it.....
Great video! I appreciate you going so in depth with the functionality.
Very helpful video! Thanks for sharing this information. I love Yamaha mixer. I’ve tried two different brands, but always come back to Yamaha.
Thank you so much for the video!! I gotta say, your videos helped me a lot in deciding to purchase this mixer. After 3 months of heavy use, I’m super happy with it. The FX engine is awesome, Yamaha has it super dialed
Glad to hear this.
Love this console. Great pres and the USB output quality is superb, super clean.
Thanks. Very useful for someone who knew nothing much about effects. I’m glad I bought the MG10XU, though for a different purpose.
Good idea to showcase the different effects! 24 is my favourite!
Good choice!
Insane performance over there 😂😍
You went through the trouble of testing all the effects. My man.
He did a good job teaching and testing out the effects.
You're awesome for doing this, thank you so much!
Tough time choosing between the Mackie ProFX10v3 and the MG10UX, but the effects parameter knob was the thing that pushed me toward the Yamaha. Also, I REALLY like the compressor circuit. Sounds and feels like a real compressor, as opposed to just being a limiting tool. Only thing I'm left wanting is Mute buttons. MG12UX is a likely future purchase!
Check Mg10xuf bro !
I agree 100%
Nice, as soon as I have used the AG06 well I will end up switching to this one or to a future equivalent version probably
Just ordered mine thank you for the video! Cant wait to mess with this one!!!
Good choice!
Thank you. These videos are super helpful. Nice, clear explanations. Much appreciate.
Please I tried using your Yamaha products for a long time. Was very satisfying results. P90 spent 2 Grand with those people to get any kind of a equalizer on their mixers. I do not only dislikes Yamaha mixers. I don't think I would be misleading people to get I'm not to purchase one. I look at it as a piece of junk
this is the video ive been looking for. Ty
Excellent demo, appreciated
This is a huge help in finding what I want. Thanks bro.
The FX RTN gives quite a lot of flexibility to fx too as well as the parameter control.
Hello, Kettner, a question here.
Yamaha MG10XU is better than Scarlett Solo 3rd gen in terms of sound?
I found the scarlett to be way too rudimentary, I mainly want to use a mixer or interface for voice acting and light singing, so my only concern regarding Yamaha MG10XU is if the sound is at least equal or better than scarlett solo 3rd gen.
Also, do you think Yamaha MG10XU is at the same level / better/ worse than Soundcraft Notepad-8FX?
I wish Yamaha would have built in the ability to use multiple effects on one channel as well as to use different effects on each channel.
it has!
But in their mgp series (they cost double the mg mixers)
I made sure I hit like before watching
ahah, thank you.
Nice effects demo very helpful
Listening to all these 24 Effects is so fun I'm planning to get this for My Shure sm7b
Aha, perfect
As a 1202FX former user, I was hoping the Reverb effects would sound more natural and smoother, I didn't really like those that much, unfortunately. This was the deal or break for me, I guess I'll have to look into another mixer option.
Yamaha SPX reverbs are like that, have that grainy quality, some like it others no. I find them quite useful.
Was very helpful, thank you!! :)
Glad it was helpful!
Hello again!
Really following your videos!!
I would have 2 questions..if I may:
1- can you apply one effect on channel 1 (for ex.)
And a different effect on channel 2,
Both at the same time ..
2-is ther an equivalent mixer, with better effects?
And one with more ?
Thank you!
I really love this video. Thank u for making video of all effects of yamaha mixer I own this mixer the sound quality output is awesome .
Glad to hear that
@@kettnercreative Is it possible to set different FX on each channel or the same fx will be added to the all channels ? I mean let’s say Reverb for channel one for singer1 and delay for channel 2 for singer 2 and so on for instruments.
that was awesome
Which effect is most used for singing live on social media?
Superb demonstration.❤️🔥😘
Nice run through, can you set different effects on different channels?
Yeah, that's what I want to know too.
Just read further down and - no, you can't.
Hey great video. I would love to hear some long sustained notes on some of the effects - I think it would make more sense, like in say flanger-. I know you did hold on to some notes on some cases, just not on every effect. Anyway, many thanks for the video AND the channel. I have not come across any video of the yamaha or mackie consoles that come with faders.
I realise that faders are susceptible to damage - is this why you do not buy/use these mixers in your business, or is it simply an issue of the elevated price range? From what I understand you rent out audio gear, so I assume the main concern would be to have gear that performs well overtime.
Anyway, would be interested to see reviews of gear that has faders on, rather than just knobs.
Good you go into detail about the usb connect and different ways of using it?
Another excellent video.
Thanks again!
Would like to ask please is the FX Send of the MG10XU stereo or mono?
Would like to connect Strymon BigSky that is stereo. If not stereo, what mixer do you recommend that I could connect stereo effects? Thanks for any help.
Does an effect applies to all channel simultaneously or is it individually?..i wouldnt want to hear both my guitars and my vocals having distortion..hehe .seriously mate how does it work?👍👍👍
Yamaha MG10XU vs Allen and Heath Zedi 10Fx which one is best??
The Yamaha has better preamps, and more stereo inputs. The Allen+Heath has better FX, Tap Tempo, and an extra aux.
nice video mate, just quick question, where did you connect your mg10 audio out, is that direct to speaker or you connect to usb going to laptop, hope i fet the answer mate, thank you.
What if you want like a reverb effect on only one channel? or two different effects on two different channels? Is that possible
yes would like to know
Hi for Karaoke do I strictly use Program 14 and also use the parameter knob
What is the function of parameter knob
Which effect is the best for singing?
I Used mine #3
Very helpful tutorials. Thank you so much. God bless you.
Glad it was helpful!
7:12 Okay that was perfect xDD Had to laugh at this, could have been me... this was so perfect xD
Great. Thank you
I have a MG10XU. We use it as part of our set-up for Karaoke. Works great, but I'd like to utilize the USB feature. I'm an analog guy trying to embrace the digital world. Can you provide any details on the USB feature?? Right now, I want to output the mixer to my iphone for recording. Can you help an old guy out??
Thanks for the video. Can it have a separate effect for mic vocals and separate effect for my instrument channel? If I select an effect, will it apply to my Bluetooth music too, in case I am doing karaoke? Thanks
I'm guessing you're only have to have one effect being used at a time, right? So you can't, for example, have the Reverb to the voice channel and the Phaser to the guitar channel, right?
That's right.
thank you very very much . much appreciated.
nice run through,bro- I feel the mackiefx10 has a better effects engine, more crisp-agree>?
Hi thank you for this video. I am planning to buy this mixer. Two questions please.... when you have for example effect 3 activated and you switch off the device, when you turn it back on does it remain on the last effect you used or starts from effect 1? Does the monitor/phones pot affect the Stereo Out when turned? Thank you!!!
Do I have a bad unit? I've found that line 5 to 10 are extremely low in volume even when maxed on the mixer. Even with the audio equipment (keyboard and computer) outputting max volume to the mixer.
Also, the sound quality is degraded by the mixer compared to connecting headphones or speakers directly to the audio equipment. Even through lines 1 to 4 with gain at neutral and volume at 12.
Am I doing something wrong? this does not occur with my two older mixers. It shouldn't be this complicated
can you disable the onboard fx but still use the fx send/return?
Sir i don't want to make this live video from yamaha mg10xu mixer. I want to record audio and video simultaneously in camera. Will it be possible or not reply me and how will the sound be. Will you like it or not, please give some reply!
Is the fx send of the mg10xu stereo?
Great video series btw. Thanks alot!
Mono.
Nice Video, are you able to combine sound effects example, effect 24 with a delay
Dumb question, maybe... But if you don't turn on the FX engine will the signal come through as normal? If I turn up the FX knob on the mic channel will it act as a separate signal for example?
Thank you very helpful. But I am debating weather to buy this mixer or the mackie profx10v3. I’m mainly buying them for the effects. Can you make the same video but for the mackie profx10v3? Just going over the effects the same way you did here. That would be very helpful. Thank you.
It's on our radar for sure. Hoping to have the video done this week. Stay tuned.
@@kettnercreative ok thanks a lot looking forward to watching it
Another excellent review..👍. now eagerly waiting for Mackie profx V3..
Everyone give Big Big...👍👍👍..
Soon! Not sure when, but I'm hoping by the end of the week.
Can you have two or three different instruments or mics with different effect for each one?
Nope
Thank you, very helpful video
Hi Jordan , I’m just purchased this mixer to use for my acoustic setup .. so far I love it but I use the headphone jack for an inner ear monitor while I’m playing .. I use some reverb to sing with but is there anyway to not get the reverb through my IEM ? It sounds fine through the speaker but in my ear it’s just too much and muddies the vocal too much and it’s hard to hear if I’m on pitch .. not sure if I explained that right . This is a great channel, thank you for the help !
Which is the best effect for singers?
The best effect is the one that you like the most! Everyone has a different opinion.
What effects setting would you recommend for the average karaoke singer?
Karaoke effect
I tried using an effect during a livestream for a robotic voice effect, but the listeners only heard my regular voice and not the effect.
If you follow the steps in this video, they will be able to hear you next time.
Hi, great vid!! Could you tell me please, can a tc helicon mic mechanic 2 be used as an external effects with this unit in the effects send? If so what wires would i need? Many thanks Sean
Hi, did you work your query out. I've got a TC Duplicator and wondered the same.
Can you use two or more effects at once?
Hello, first of all, thank you for informing us like this, I have a question, I am broadcasting live on TikTok, can I connect the device to my Android phone, thank you.
Yes you can.
@@kettnercreative Thank you for your valuable comment, I think I should do this with irig.
can you select more than 1 effect for each channel? can you select different effects for each channel or the effects apply to all the chanells equally?
You can't select more than one effect, but you can control how much of that one effect goes into each channel.
The effects aren't stereo?
EDIT: I found out they are. Please demo stereo things like reverb in stereo!
i'm currently having an issue where when i turn the effects on, it also makes my desktop audio have the effect too? need help to fix this :c
I'm a beginner and just got this console. ¿ What would be the best effect for kareoke # 13 or 14 ? I would appreciate your input.
Which effect and parameter setting would u recommend for singers?
How good is it as an audio interface, does it have better preamps than Mackie profx v3 series.
the have a detailed comparisson of yamaha vs mackie
Is it possible to assign a separate effect to each channel eg vocal reverb to the mic input chorus to the guitar input channel.
No
I didn’t quite understand one thing… if I have a bunch of synths connected to the mixer and use the built in fx, and want to add an exterior effect pedal to the ‘send’ does it cancel out the built in effects or can I now use both at the same time?
Hi sir.. Please reply sir... I want to buy for singing... Please reply sir yamaha mg10xu better or mackie profx10v3
Better late than never. If you want better quality, go with Yamaha. The Mackie brand was bought out by a venture capitalist firm and they are using subpar factories and cheaper components. You are lucky if you get a good Mackie board these days, even read about a lawsuit from a few people and Mackie ignored it. I wouldn’t support a venture capitalist company just trying to make a quick buck before dumping the brand on the next sucker investor.
Hi, Vocal Echo or Stage efects are made by Yamaha using a combo from reverb with delay ? I ask you because other brands use multi-fx like delay+reverb wich is most used by singers
Hi Jordan, your videos are super helpful and helping me a lot to decide what mixer I should get. I am a singer and want to record songs from home. I am leaning towards the Mackie ProFx6v3. I do not want to invest in a pedal just for the harmony which is really useful. Is there any mixer that has the basic harmony effect?
Not that I know of. Especially with an analog mixer.
analog chorus is something that might cost as much as the mixer itself. i just spent 150 for an analogue ebs chorus unit and i was very happy with that price. pedals are very cheap these days tho, so if you were really hell bent on a harmonizer (obviously you can harmonize w urself using the mixer anyways, but its definately 2 different things) you could probably find a quit reasonable pedal that funcitons well for between 50 and little over 100 bucks
how do you designate which input you want the effects to change? example: if in want effects on my guitar and not my mic?
I am considering buying this Yamaha mixer for my live jamming . Equipments include 2 mics , 2 ACCOUSTIC amps ( AER and Fishman). I want to have the 2 mics (in) through the mixer and out to two acoustics amp such that the guitar and blend in with the voice coming out from the 2 amps .
Note : the 2 ACCOUSTIC amps are standalone features good enough for the usual one mic one guitar ( voice/ Singing) come in /out from the same amp ……a friend advised no need to go through the mixer this way. I am confused . Can you give me some advise
Thank you ver much Kettner
Hi there, do you think any of the effects is a combination of reverb and chrorus , like symphonic ? Regards
I just got the MG12XU, but need a step-by-step for engaging the in-board effects. the manual confuses me! The manual says FX goes through AUX1, another UA-cam video says FX goes through AUX2.
Can i set reverb and delay simultaneously at a time?
which is best for a small church room?
I can’t get the sound to change with the effects. Any recommendations? Nothing changes. Audio stays the same from the mic
many thanks for this great video. Can you tell me if i can have one effect for the mic and a different effect for the guitar at the same time. Many thanks.
You can't on a mixer of this size. Generally you would need to bump up to something like a QU 16, TF16, or X32 for more than one FX from the mixer.
Hi there. Is there any way you can have two effects running at the same time?
Not on a small mixer like this. Typically you’d need a digital mixer to accomplish this.
can we apply different effects to different channels ?
Only one effect at a time can be in use.
I just got one of these cuz I love my Yamaha mixer, EMX212s. But the same mic with the same cable has considerably lower audio quality. Sounds good on the Old one but this new one it sounds pretty crappy. Is it because it's a digital USB signal? Is that possible? The old one is analog and the new one is digital. I'm just wondering if my unit is defective. Also i have a condenser mic that doesn't even work on the New yamaha , with the phantom power on of course. You seem to be the master of this mixer so i thought I'd ask. Thanx again, love your channel
Hard to say without looking at it myself. I would call Yamaha if I was you.
@@kettnercreative thanx for that, love your channel. Will do and thanx
What do you think is the best sound effect for vocals, particularly folk type music? I have been using setting 6.
3 or 6 probably. Would need to play with it a bit.
@@kettnercreative Ive used the Yamaha for many years. As a solo musician playing all kinds on genres. I use the Karaoke. Not sure if it's the best choice tho
Pretty cool
i had my controler plugged in CHNL 3 and CHNL 4 and the signal was peaking distorted will it be ok to plug my DJ Controller in the 5/6 CHNL Unbalanced channel ?
What's good setting for vocals.
that was great but it seems that there are more than necessary types of reverb. Most vocalists or youtubers will only use about 4
Better to have more than less
Was thinking about using this for acoustic guitar live performance. Can those effects be used for vocals or for guitar.
Yes they can.
I'm a singer doing live shows. Are these reverbs good for that? If not is there an external reverb anyone could recommend ?