lexus is300 Evap codes Fuel tank removal
Вставка
- Опубліковано 20 сер 2024
- / official1samuel
* For car parts click link Below *
stores.ebay.com...
overfill check valve assembly 77390-53010
overfill check valve gasket 77177-12020
cut-off valve 77340-53010
cut-off valve gasket 77179-33010
fuel filler cap ( 2001-2002 ) 77300-53010
I need to swap my rusty fuel tank out soon, this video is a absolute saviour, there are almost no info about this on the IS300 form!!!
Glad this helps
I just bought my first 2004 Lexus is300 sport last week. Clean af.
The neighbor bought it in 2005.
My lil brother has a is300 too. Blue. I watch all your videos. Riverside County, California
Fire!
Nice video! Finally, someone that did this the right way rather than cutting a hole in the body. I have 2 ISes that are throwing these codes, so I may need to do this twice!
Glad to help! Plan a day to do this job
Right! especially with the noting that it's a pain in the ass so just do everything while it's down. My issue before was the check valve cracked from the spring pressure. Need to figure out how to strengthen that thing so it doesn't crack.
I did this at job with a lift, thanks for the tutorial !
Glad to help
Old Toyotas in general are notorious for needing this part replaced evidently. It's the cause of many P0442 and similar codes.
Bless you for the part numbers. You also a gangsta for making a video on the alternate way from cutting the seat
U welcome
Quick and thorough enough!
Thanks for this video. My 05 has this problem. Thanks to you I now know what I'm in for . 👍
Glad to help G
Yea...... my IS is throwing the same code........ respect man.im not dropping my tank unless i have too....... you made a video while back that you asked what was the best video or most helpfull video... i didnt have time to reply... it was when you found that penny in the middle center console .. cig lighter... kept blowing the fuse....... i miss cali... i was born their.... sadly its gone crazy... you cant even carry a gun freely their... not to mention... a house that sells for 1,000,000 out their sells for 50k out hear in Missouri... look it up.. im not saying gheirs not high end houses out hear.. but dam... my uncle sold his house out their for like a mill and it was tore down.. same month to build anew one WTF.....lol.... anyways miss the weather not the drama.....
100% bro GLAD to help
thank you for the video. I did this, used jack stands, dropped the tank changed the overfill check valve and all codes are gone now.
100%
“Pretty easy to remove”
**Continues to remove the whole car**
(Jk) 😂
Agree
Thank you buddiiiii
I’m doing this on the ground. Wheels under back tires. I’m on the skinner side so it’s helpful. Sucks but not to bad can def be done.
Nice job.... I live in cali too hate smog time so much......
Feel ur pain G
Bro, you should line that pit with some tarps to keep the dirt away from any of the parts, and the ants as well!...lol Nice vid!
Fr thx
Check light engine 😂 good video bro🙏
it’s the line up for me 🤣🤣🤣
Hello, Thank you for the video! Need some help. Just replaced the overflow valve on my 2004 IS300 did this without dropping the tank, (by cutting the metal from above) when I wss pulling the hoses off it seemd that some slack in the lines gave way from the tank side. hoping that this was slack in the hoses and not that the hoses came off the other end!!! Could you help in finding out is the hoses are still connected without having to drop the tank please. Your video shows this line at 7:35 time.
Glad to help. Another option is to remove charcoal canister located in the trunk. i was going to make a video on it but i dropped tank instead to change/clean everything.
Just drained tank, replaced fuel filter, pump, overflow, filled with Premium fuel, and car runs like new!! Next is coilovers just, watched your coilover video.. nice
@@bruceadonnelly69 slam it G
What didn you use to glue the shield to the tank ?
Good ? - if the bolts are torqued in the straps will be tight
Have same codes on my IS, besides it tripping the check engine and not passing emissions. are there any Negative effects to not fixing the OCV?
Might effect mpg alittle. My car ran like a champ even with all these codes as long as the cats arent pluged up.
would this be the same or similar to the GS400?
Hey can you help me out!!!!! Busted up fuel tank on my 01 is300, found one but its from an 04 is300…will it fit fine on my 01???? Lmk pleaseee thanks
Yes my friend had an 01 is300 and they look the same.
Like others have said, thank you so much for this video. This should be on the IS Forum for sure. Were you able to clear out the codes without them coming back? (Asking as my mechanic wants to do a similar job and I know it will cost money, but will be too much for me handle myself and I honestly don't have the time either).
Yes codes are cleared. You will need like 150 miles to drive around then clear codes again. Any1 can do this - just need time and all the tools,
What glue did you use for the heat shield!?????
any clear all purpose glue will work
You ever delt with abs and traction light on you is my are on no check engine light
Try disconnecting battery . If it comes back on u need to scan for codes
@@official1samuel577 i tried that the car is lowered on springs and shocks you think that maybe it
@@official1samuel577 I'll try scanning thx bro
@@oldschoolromano5056 let me knw bro
@@official1samuel577 for sure I'll let u know what the scan codes are
Did you have to remove the e brake line
yes sur
@@official1samuel577 Glad to see someone that isn’t lazy and destructive. 👊
would this fix the issue im having my is300 wont let me pump more than 2$ at a time and cant fill up normally.
Maybe u got something stuck inside ur filler tank hose.
@@official1samuel577 i get codes p0446 and p0441 somtimes it pumps gas fine sometimes i can put more than 30 cents at a time
My’01 is300 gas gage is broken, it stays at mid then drops to E when it’s empty, I have to mark my mileage every time I fill up so I don’t get fucked, any recommendations how to fix this?
Check ur fuel pump assembly. Theirs a level with a float might be bent or broken
Sam you get monetized yet?
Yes. Jut got to make more videos
how many bolts are holding the actual tank?
Its not many bolts really. Its just there are brackets and other things that need to be taken out of the way