Yes all my Heli's were bought as kits except the Trex 450 which was Rtf,I think that's why I end up buying more because I love the unboxing and building process,the 600 is amazingly complex with a geared tail drive and complex cyclic servo linkages, so she did take some building and some research.
Yes I've been meaning to do a DFC head conversion to it!! But it's a bit expensive to run!! 12s 2× 6s 4000mah lipo's it runs on!! To be honest every time I flew the thing it terrified me Lol
@@IansRCExploits Just noticed how old the video is! I am only an occasional heli flyer at the moment but this will change when they build around my field and I lose my 'overfly' space for the fixed wings but when that happens it will probably be helis and very small quads i come to rely on. My first experience of helis was a Copter X t rex 450 clone that i built myself. Apart from the odd hover with the training gear it was a disaster and had to be repaired virtually every flight out. I used to buy third party parts that were even cheaper than Copter X parts, tail booms and main gear spindles were particularly vulnerable. 10 years later i bought a blade 120s and then a 230s V2 and suddenly i was able to experience some success due mostly to the stabilisation of course. My mate warned me that heli flying is all about confidence and i still think he was right.
I hadn't flown the 600 for a while and felt very nervous,I was being very careful with the throttle that big electric motor has lots of power that I'm not ready for yet Lol
Hi Ian, I’m new to rc helicopters, I have picked up some second had helis, Mainly align helis, 2 of them are what you describe as the beast, one with a ranger body and the other with a bell 222, I’ve got loads of kit to sort thru yet. Can you still but spare for them? Got to figure out how to take the body off yet to check everything works and see how it’s wired, will try and post a video to my channel over the weekend
Hello, if the Heli is a Trex 600e, which is the one I called the Beast!! You should easily be able to get parts for it, are you in the UK? If you are the 2 companies I use are www.align-trex.co.uk www.midlandhelicopters.co.uk
Hi Ian, thanks for the subscribe, I have a 800e dfc also but that needs parts, I have 2x500, one with a 5 blade head, a 470l that needs parts, plus a 200 that needs parts. Also a large amount of bits, such as couple of receivers, loads of lipos, some 2.4ghz jr propo receivers.
Hi Matt,I put the back battery over hanging the battery plate by roughly 1.5 inches this seems to give me a good balance I found this out by accident because if I do it any less the canopy will just not fit on and I do find the 600 can feel a bit tail heavy, what mah battery's are you using mine are Turnigy 3000mah I don't think I would go any bigger it's one heavy mother already.
Wow the 600, amazing😍. That is a very big Heli. Do you still have it, Ian? Some power with that 12s😳😃 thats a big step for me( i think🤔) would love to fly it😋
@@IansRCExploits Well said, Beast😃, i saw one flying, it scared me. But, the sound it makes😍 and how it's hanging in the air, just amazing. I was scared from the 330s in the beginning also, but know it's pretty much my daily haha. You will get there Ian. I just know. Don't ever sell it😃
Hi mate, ive got the trex 600 domin and always have probs finding the COG and i noticed you didnt do that at all, unless you have ur lipos mark out where to put them, is that something you have probs with? thanks for vid matt
Do you mean Angular mode like you get on the Microbeast Pro? If you do then no the Trex 600E has a fly barred head so only needs a tail Gyro as the flybar makes the Heli stable!! If it was flybarless then it would need a Gyro for the head and tail 😄👍
In a way!! The flybar has paddles on it which act like a mechanical Gyro which helps to keep the Heli stable!! When you use a flybarless head the Gyro does the job for you😄👍
Hi Chuck, I'm sure it would be possible to convert the Nitro Trex 600 to electric!! But I'm my experience it would cost a fortune to buy all the seperate parts that you would need for the conversion, it would probably be a lot less expensive to try to buy a second hand Trex 600e 😀👍
Yes and it terrified me every time I flew it!! But it was a lovely kit to put together, down side is that it runs on 12s to much power for me Lol thanks for watching and commenting Robert😄👍
Yes nitro is exspensive I think we pay about £30 for 5 litres but I have no good local shops so have to purchase mine online and have to pay a £10 courier fee as well.is gasser a petrol helicopter?
Hi Jose, I'm not sure if you would be able to get a 600e Pro now, the only place would be somewhere like ebay or a Heli shop that sell second hand Helicopters!! Hello Tenerife 😀👍
With the Trex's speed controller the throttle has to be set at mid position it wont arm until the throttle is brought down to the lowest position then the castle speed controller finishes set up,so it seems that I know exactly what I'm doing.
Yes all my Heli's were bought as kits except the Trex 450 which was Rtf,I think that's why I end up buying more because I love the unboxing and building process,the 600 is amazingly complex with a geared tail drive and complex cyclic servo linkages, so she did take some building and some research.
Nice heli!!!! I'm setting up the Trex 470lt and should maiden this weekend....
Sounds good👍🚁🚁I've recently built the Trex 470lp here's a link, I haven't been able to maiden mine yet😒
ua-cam.com/video/kz0v_Bn3VTs/v-deo.html
That thing is huge ! Wow
Awesome !
Yes it scared the life out of me Lol
Believe it or not they aren't that exspensive,the 500 uses 1 pack and the 600 2 wires in series to double the voltage so I already had the packs .
Thats an awesome beast!
Yes I've been meaning to do a DFC head conversion to it!! But it's a bit expensive to run!! 12s 2× 6s 4000mah lipo's it runs on!! To be honest every time I flew the thing it terrified me Lol
@@IansRCExploits Just noticed how old the video is! I am only an occasional heli flyer at the moment but this will change when they build around my field and I lose my 'overfly' space for the fixed wings but when that happens it will probably be helis and very small quads i come to rely on. My first experience of helis was a Copter X t rex 450 clone that i built myself. Apart from the odd hover with the training gear it was a disaster and had to be repaired virtually every flight out. I used to buy third party parts that were even cheaper than Copter X parts, tail booms and main gear spindles were particularly vulnerable. 10 years later i bought a blade 120s and then a 230s V2 and suddenly i was able to experience some success due mostly to the stabilisation of course. My mate warned me that heli flying is all about confidence and i still think he was right.
Yes confidence and loads of money Lol
I would hate to have to purchase those big batteries, nice bird though,nice flying.
I hadn't flown the 600 for a while and felt very nervous,I was being very careful with the throttle that big electric motor has lots of power that I'm not ready for yet Lol
Hi Ian, I’m new to rc helicopters, I have picked up some second had helis, Mainly align helis, 2 of them are what you describe as the beast, one with a ranger body and the other with a bell 222, I’ve got loads of kit to sort thru yet. Can you still but spare for them? Got to figure out how to take the body off yet to check everything works and see how it’s wired, will try and post a video to my channel over the weekend
Hello, if the Heli is a Trex 600e, which is the one I called the Beast!! You should easily be able to get parts for it, are you in the UK? If you are the 2 companies I use are
www.align-trex.co.uk
www.midlandhelicopters.co.uk
I will look your channel up as I would like to see them 😀👍
Hi Ian, thanks for the subscribe, I have a 800e dfc also but that needs parts, I have 2x500, one with a 5 blade head, a 470l that needs parts, plus a 200 that needs parts. Also a large amount of bits, such as couple of receivers, loads of lipos, some 2.4ghz jr propo receivers.
Btw midland helicopters are by my folks house
Ooh sounds like you got your hands full, that 800 will be a monster!! I found the 600 terrifying enough Lol be careful these things can bite 😒
Hi Matt,I put the back battery over hanging the battery plate by roughly 1.5 inches this seems to give me a good balance I found this out by accident because if I do it any less the canopy will just not fit on and I do find the 600 can feel a bit tail heavy, what mah battery's are you using mine are Turnigy 3000mah I don't think I would go any bigger it's one heavy mother already.
Wow the 600, amazing😍. That is a very big Heli. Do you still have it, Ian? Some power with that 12s😳😃 thats a big step for me( i think🤔) would love to fly it😋
Yes I still have the Beast!! I was going to make it DFC but just haven't got round to it 😒
@@IansRCExploits Well said, Beast😃, i saw one flying, it scared me. But, the sound it makes😍 and how it's hanging in the air, just amazing. I was scared from the 330s in the beginning also, but know it's pretty much my daily haha. You will get there Ian. I just know. Don't ever sell it😃
No I won't sell it Lol
@@IansRCExploits 😆👍
Ian
You are suppose too remove the blade grip before turning on the heli
Yes thanks, that's the one and only time I ever did that!! Luckily I didn't damage any servos 😀👍
I am trying to acquire one of these as we speak I need this heli in my life
Well good luck!! You going for flybar or flybarless?
@@IansRCExploits flybarless
Do you know that it runs on 12s it's a very expensive bit of kit!!
Hi mate, ive got the trex 600 domin and always have probs finding the COG and i noticed you didnt do that at all, unless you have ur lipos mark out where to put them, is that something you have probs with? thanks for vid
matt
Can this helikopter fly using angle mod ?
Do you mean Angular mode like you get on the Microbeast Pro? If you do then no the Trex 600E has a fly barred head so only needs a tail Gyro as the flybar makes the Heli stable!! If it was flybarless then it would need a Gyro for the head and tail 😄👍
@@IansRCExploits So it's like an extra ballast.
In a way!! The flybar has paddles on it which act like a mechanical Gyro which helps to keep the Heli stable!! When you use a flybarless head the Gyro does the job for you😄👍
@@IansRCExploits you mean like heli ch 4
I'm not sure what you mean!! My friend
hi , i have a Trex 600 nitro pro , can it be converted to electric?
Hi Chuck, I'm sure it would be possible to convert the Nitro Trex 600 to electric!! But I'm my experience it would cost a fortune to buy all the seperate parts that you would need for the conversion, it would probably be a lot less expensive to try to buy a second hand Trex 600e 😀👍
That's a real chopper
Yes and it terrified me every time I flew it!! But it was a lovely kit to put together, down side is that it runs on 12s to much power for me Lol thanks for watching and commenting Robert😄👍
Do you do all your own setups on your helis.
Looks like a Real game changer
I love nitro but the price per gallon is crazy $50 dollars canadian for 1 gallon, I really want a gasser but not much to choose from.
I didn't watch the whole video. But you should never power up your help with the blades in the holder.
Yes your right! It was a mistake : (
yeah, your servo's are suffering, they're trying to get to the 90 degree default at the start of the system.
Yes nitro is exspensive I think we pay about £30 for 5 litres but I have no good local shops so have to purchase mine online and have to pay a £10 courier fee as well.is gasser a petrol helicopter?
yes a "Gasser" helicopter runs on petrol, with a additive mixed in that is available from hobby stores and online. Lovely Heli BTW!
Well done mate. I'd rather watch that kind of flying rather than 3D.
Thank you Brad.
Hola donde puedo comprar uno igual a un buen precio gracias te llamo de Tenerife islas canarias
Hi Jose, I'm not sure if you would be able to get a 600e Pro now, the only place would be somewhere like ebay or a Heli shop that sell second hand Helicopters!! Hello Tenerife 😀👍
I just watched this, excellent, BIG model! 👍👍
Big and scary Mark 😀👍
@@IansRCExploits If it was scary for you, I'd be terrified!
It's a massive Heli, runs on 12s!! Those Blades are massive and spin a a silly speed, they would easily Chop an arm off 🦴🦵
@@IansRCExploits 12S!!!!! 😯
Yep 12s runs on 2 6s 4000 mah lipo's!! It really is the BEAST 😀👍
des geste a ne pas faire ...1 les pal 2 le teste av ar gauche droit les batterie et radio pas bien
With the Trex's speed controller the throttle has to be set at mid position it wont arm until the throttle is brought down to the lowest position then the castle speed controller finishes set up,so it seems that I know exactly what I'm doing.
en vole il faux faire des 8 droit et gauche pas bon