Classic Truck Wood Bed Floor Fitting, Prepping, Staining and Clear Coat/Sealing - Bedwood / Bed Wood
Вставка
- Опубліковано 5 жов 2024
- Dave Welch is a seasoned vet at building Classic Trucks, today he shares his experience in Bed Wood prep, stain and seal (clear coat). First, Dave sets up the wood so that he gets a PERFECT fit, then he talks about wood prep. Next up, some stain options and custom effects, then finally he'll show off a couple options for the clear coat. Dave Welch is a classic truck Specialist and he's got plenty of tricks for nearly every project on your classic!
Product Links:
www.holley.com...
Connect with us:
Instagram: / brotherstrucks
Facebook: / brotherstrucks
Today was the first time I found your channel and immediately subscribed! About 30 years ago I begged and plead with my wife for a '60's chevy to restore and she finally agreed I media blasted all of my body panels I etched all of them, primer, paint putty, more primer, finally the paint! Now the new wood bed kit.......uh......I would have celebrated the internet and a show exactly like yours because it would have saved a ton of labor! I hope your channel inspires folks to restore mare of these gorgeous trucks and get 'em on the road where they all belong! Great channel and thanks for sharing your work!
Great story! Thanks for watching and subscribing!
Enjoy watching Dave W. OLD SCHOOL MASTER TEACHER FOR OLD SCHOOL CLASSICS
Dave you have taught me that everything has to be just right not just ok.
I will not start a project until I check on your videos how to. Then I follow his instructions.
I’ve watched lots of UA-cam videos and seen people who are very meticulous in their presentations but this guy is next level. Excellent job!!!
Dave, This task was well covered by your experience, product knowledge and even a good explanation or wood fiber. The cut edges and end fibers are very well explained. It is human nature to rush this step similar to finish painting.
I would recommend once the color is chosen and sealant apply, for most, plan on re-applying sealant once per year, as wood expands & contracts to humidity and temperatures, cracks form. It require way more attention than a picnic bench and maintenance.
Not politically correct now, but my 1965 C10 Apache delivered diesel, oil and carried waste oil off site from Dozers, Scrapers, Backhoes, etc but spills soaked the old growth Southern Pine GM used for truck wood floors. It had a perfect color but no rotted spots in the years I owned it. There are to types of finishes, soaking and film types. That’s it.
Very good info Dave and great video presentation showing options, technical and best practices, for the best looking and longest lasting project we can make.
One note only; Factory cut wood is seldom 90 degrees straight cut on either end. So use a framing square or cross-cut saw and take an 1/8” of the end to square it up before cutting the other end…as long as the the wood package has enough to sacrifice!
DK, ASE master tech, retired.
Always helpful to watch a BROTHERS Truck Parts video before jumping in!!! Thanks David!
Our pleasure man!
Catching up on your videos, all your videos are helpful in restoring these trucks, I have a 66 C-10 , restored a few years ago, all your videos helped in finishing, thanks to you and BROTHERS for sharing these videos.
David, you tips are so timely, good and labor saving! Thank you for your thoroughness!
Our pleasure!
Attention to details, and patience, payoff big time, and you remind us to always keep checking for square and gaps, sometimes we forget , get excited to finish quickly and end up with a nasty mess!
Thanks for your to detail reminder
Thanks for the comment!
David, All great tips. What I might add is to pay attention to your coating temperatures especially if they have been stored in a cool area. Also, when using a brush to apply a finish, stain or paint, I raise the boards off the table just enough to run the brush along the bottom edge in case I missed a run. I've used small pieces of 2 x 4 and even empty plastic pudding cups. There are even "professional " risers you can buy.
Great tips!
Love you brother.. is a placer learning and watching your videos .. thank you..👍🙏🙏🔥🔥
Thanks for watching!
I just bought a 1957 Chevy 3200. I am excited to do some of the work myself and your videos simply have been helpful in the research before I bought my truck.
Right on man, glad we could help!
on my 48 GMC i took a torch and gave a light burn which brought out the look of the grain, then clear coated it.
Wow! Awesome idea!
Wow, that was a great example of how to do it right.
I find that when boards are laying flat during clear coat it’s best to stand then up.
Gravity allows the clear coat by its density to drop in the the wood grain pushing air out.
If you stand the wood up, this doesn’t occur.
Just a tip
Excellent, thanks!
I love the series, wish you had a series on the 1947-54 Chevy or GMC .
What would you like to see on the 47-54? We do videos on those all the time and have plenty of content already available.
@@BROTHERSTruckPartsTV
Seat covers on the older trucks.
From what i can tell the new covers are retained different than the older? (62 c10). No hog holes on the 62. No instructions with cover either
@@turboflush there's no hog holes on the post '62 covers either, the hog rings simply grab on to the seamed edge of the vinyl. On ours there's a piece of plastic material sewn in so the rings dont tear through. We actually have a video of installing a seat cover on a '63. It was part of our project Eighteen8.
@@turboflush They use a clip.
A small c clip about half inch long and
About 1/8
It clips on the edge of the metal
I prefer to do a distressed bed.
I pounded bolts. Horseshoes. Nails. Chain. Threw in a couple of Horseshoes hot.nuts bolts. Scratches and then I stained the wood. Gave it the used and abused looks awesome 👌
That sounds cool! Great creativity!
i have used a epoxy coat with a light dusting of sand for grip so things don't slide around in the bed of the truck
You are correct - l need this! Thanks.
You are so welcome!
My first time to see one of your videos and I’m very impressed! Thanks
Thanks for watching!
Wish u guys @ Brothers Truck was back on tv again this helps alot especially 11:24 see ur using Rigid drill /impact aswell good choice .
Thanks Malik!
Very nice job,Thanks for your skill s !
Great video David
"... every time you do, a mechanic finds a tool he lost." Had to subscribe after that one.
Classic Dave.
Yes thank you sir 🙏🏿
Our pleasure!
This video is amazing
Great video it gave me some ideas for my 68
Right on!
I'm using Brazilian Rosewood that I milled in my cabinet shop. I'm finishing it with Tung oil (drying oil). It takes about 45 days to do the finish.
Sounds like it's going to be amazing!
Excellent!
Dave,
I love your videos and your humor. one question, when assembling the bed, is it better to paint the parts first before assembling or paint when fully assembled? Thanks. BTW, I have a 63 Fleetside.
It really depends on what you're going for in the finished truck. We've done it both ways depending on time and target outcome, but typically you would paint the parts individually if you were going for a higher quality finished product.
Working on my square body now
Have fun with the project!
Dave, can you make a video for the replacement of the two angle strips on 67-72 step side trucks? This is the worst project I have tackled. There has to be a better way......has to be!
Is there a specific type of stain that needs to be used, when doing the automotive clear coat, also will the wood expand and contract and crack the clear?
Great video !!
Our wood is dry, so once sealed it will not expand and contract due to the lack of moisture in the wood. No special stain is necessary before the automotive grade clear.
Dave, Any video of the Fleetside/tailgate corner going together. I am taking mine apart to replace sills and cannot get my corner apart. I have removed all the bolts I can find and checked for welds...
There are two small tack welds in the corner at the bottom of the stake pocket. You have to grind them off.
My firs time on your channel and very informative and inspirational. I need to understand your concept on wood protection after staining. What exactly are the steps?
Thanks 🙏🏾🇿🇦
The options for sealing after staining are detailed in this video at 22:00. It's basically just choosing your preferred seal type and then applying it as the directions of the sealant indicate. Most often, people pick their sealant type based on the options they have at home for applying it, ie: paint gun, brush, rollers, etc.
Thanks for the tips and tricks, just a question. What is the best type of wood to use for a truck bed and where are the best places to get that wood when living in Canada? Thanks
Any hardwood will work for a bed floor. We sell Pine and Oak which both look great and hold up well. Canada isn't a problem, its just not always cheap to ship stuff up there. www.brotherstrucks.com
Great video, what type of sand paper to use in between clear coat or urethane clear coats? Brushing in coats! No paint gun! Thanks!!
You can use a dry paper or a wet/dry paper between 200-300 grit
What I'd like to know is if you have a survivor truck with and nice patina to the paint and want to preserve it. A nice new shiny wood bed wouldn't look good. (In my opinion.) I want to know what wood would you use with out having to stain it to put in that would patina up nice to match with the rest of the truck?
Any would that isn't protected will patina quickly. The softer the wood the faster it will age.
I don’t know what to use to repair my old wood on my truck .
Spar varnish
Teak oil
Tung oil
You guys don’t make a metal floor replacement for a 1972 c10 step side?
No sir, no metal floors for the stepside.
I’m working on the woods as suggested by Dave with a clear top coat… now I need to figure out how to make those holes for the wood carriage bolts and to make them look recessed into the wood. Any suggestions?
www.mar-k.com/_assets/images/instructions/mtgholes_3-8_ofst.pdf
Have you ever tried burning the wood
What type of wood is generally used for these beds. I have a 1949 Chevy that is in the thinking stages of restoring. I have the capability to mill my own lumber, just unsure of the species.
Any type of hardwood will work.
Excellent however is there a sheet metal option?
Absolutely! Check out this link to our website: www.brotherstrucks.com/Steel-Bed-Floors-Hardware/products/286/
How many coats of automotive clear coat do you spray?
Typically 1-3 coats.
Ive got boards that have been stained for a couple weeks. Can i just clean them and clear coat them with a urethane automotive clear? No need to scuff or anything?
You're probably ok just shooting a clear now, however a slight scuff won't hurt just to be sure you've got a good surface to stick to.
Is it better to install the bed wood before painting your truck or after?
We would recommend after you paint.
Wood ALWAYS expands and contracts in its life, especially outside... no mater if it's dried or not. Even dried wood will absorb moisture and expand slightly. Even though automotive clear coat has wonderful weather protecting abilities, it cannot move and stretch with the wood as it expands and contracts. Unless you're planning to Store it in your Climate controlled environment Permanently, I'd recommend the spar urethane as the best protection. The spar aspect makes the finish much more pliable and able to stretch with the wood, thereby keeping it sealed from excessive moisture.
David can u spray the wood with bed liner and will it stick
Yes, that's also an option!
Hi, do you offer a kit for a 91 chevy 1500 short bed?
Help. Looking for brothers you tube where truck bed is assembled on a 2x4 frame before install......
ua-cam.com/video/dxlzZaVCAYA/v-deo.html
Hear me out black truck ebony stained pine applied with sock polyurethane applied with little roller to force air bubbles out works great no power tools yer welcome
Maybe I missed it but what are you using to seal the wood?
The stain as well as the top coat are the sealers.
Great video what size was the taper drill bit?
We used a 3/8"
Awesome tip on drilling the holes in the wood Dave!! Good how to vid!!
Can you apply bedliner on the bottom of the wood so you only have to paint one once?
Anyway you want to seal it is ok, so yeah, spray-on bedlliner would work too.
@@BROTHERSTruckPartsTV oh ok thanks.
How do these wood beds drain water?
Can I add the Clear Coat with a paint brush or do I have to use an air gun ?
You can 100% add a clear with a brush if you want to.
You can see Dave using a brush in this video to apply a clear coat at 24:40
How thick are the boards Dave?
Roughly 3/4"
What type of stain did you use oil based or lacquer based
The stain that was used is an oil base.
90
Hermano SOS un genio