67-72 Chevy & GMC Truck / How To Shorten Bed Sides / Make your Long Bed Sides Short
Вставка
- Опубліковано 29 сер 2024
- Website: www.brotherstr...
In this video Dave takes on a step-by step walk through shortening a Long Bedside to make it a short Bedside for any 1967-72 Chevrolet or GMC Pickup. The process of cutting your bedsides will take some time, but with Dave's help this job will be something you can do at home! Dave Welch is a classic truck Specialist and he's got plenty of tricks for nearly every project on your classic! Find Dave's videos and more for your classic at www.brotherstrucks.com
Parts used:
Patch Panel Clamps: bit.ly/2Z2GU55
Connect with us:
Instagram: / brotherstrucks
Facebook: / brotherstrucks
Twitter: / brotherstrucks
We all miss seeing Dave on our weekly Brother's Trucks videos. It's been a year since I last saw this video. I have it saved in my playlist library. Im getting a step closer to doing this to my 68 along with a front suspension and disc brake upgrade.
I have a funny story to share. I have a 2010 GMC Sierra 1500 that needs some body work done. I had misplaced my butt-welding clamps. As I was watching your video at the 1:04 mark, i had suddenly remembered where I had placed my clamps and walked right to them! They're now sitting on my end table. Thanks, Dave, for reminding mevwhere i had misplaced them at, and for the great video!
He is the best, I can't say enough good things about this guy.
Thanks man!
Thank you your video help me alot . Was my guide during the whole process
At the beginning it seemed a little overwhelming. You explained it so well now I feel it's certainly doable. Thank you for your time.
You are so welcome!
“SAVE THEM ALL”!!! Dave’s got cool hair. I wish I had Dave’s hair.
Dave is a wealth of information! Thank you Dave for taking the time to make this video and help us diy car guys to do this at home or shop! Merry Christmas!!
Our pleasure as always, happy holidays!
Thank you for all your videos you've put out over all these years. 2 days ago I cut up my 69 c10 bed sides and they came out great thanks to this video. Anytime you put up a video I already know it'll be worth watching. Thank you again. Ahmad
Our pleasure, thank you for watching!
I never miss a fabrication video. Kids, pay attention in geometery.
Thank you for the video i just bought my dream truck at 15 a couple months ago and am cutting the bedsides right now got my phone set up watch a little then cut a little thank you hhys
Well i got the front cut perfectly and im getting ready to weld it up i went a little bit farther back from the front than yall did in this video so that the one rust hole on my bed would be cut out
Yes!!!!!! Thank you!!!!
Thought you might like this! Thanks for hangin' in there.
Nice tip on the black side of the grinding wheel, it is much easier to see!
Teacher of the year 🤙
Watched a ton of videos on cutting down bedsides but I know when Dave is in front of the camera it will be laid out perfectly. Thanks for helping me perfect my craft.
I’m working backwards..I’ve got a shortbed to use on my 68 but I’m taking long bedsides and cutting them down for a true unibody truck. It may be the only c10 with a subframe.
This was Great!!! I am going to tackle this
Great information.
Thanks again
Thanks Jesse!
Very informative on this popular modifications, thanks David!
Thanks for watching as always!
Always good. Keep them coming.
Dave is a c10 guru. Wealth of knowledge
Exelent job congratulations thank you master and thank you Brothers
Great video, thanks David 🇺🇸
You bet!
Love the fact you don’t wear gloves and why, Dittos for me! I can hold hot exhaust with a smile ! 😂
LOL
IMPORTANT! When grinding, cutting, or welding make sure there is no glass in the area, the flying sparks ⚡️ will pit the glass. You won’t know it until you clean the glass for the first time after it’s pitted and the towel is snagged by the debris in the glass (don’t ask how I know this).
Great point!
Had a guy cutting metal next to all the windows in a multi million dollar remodel…ask his company how they know (like 35k later). Ouch.
It would be helpful to show some grinding tricks. You said some tips of how to do it. But there was no video of it. Great job explaining how to make the cuts and where to do them.
Great content!
Thanks for watching!
Good job
did this without ant panel clamps and was way harder and not as good as you did. definitely getting some
Panel clamps are a must in many bodywork situations.
Fantastic video!!! Thank you for helping us always
Our pleasure!
Nice video do u have a video on how to cut the bed sides on a 1966 C10 or is it the same concept as this video you just put out?
I like the no wearing gloves never could stand wearing them and never have,
David, did you eliminate the center pocket too and use a section of what you cut off to weld in? Great video!!
We did NOT cover the center hole on these bed sides because they were basically junk and we just cut them to show you all how to do it at home. We do however carry a pre-shaped plug for the center hole which fits nice and flush and can be easily welded in.
That appears to be a longhorn bed? I have one I’m cutting down for my one ton dually . Measurements are different than a normal long bed. Anyway thanks for your videos I enjoy them
This was just a regular old longbed with a side tank cutout. Good luck with your project!
Do you have an video how to shorten the bed floor?
So is there any state laws or insurance issues that a person should be aware of before jumping into this project? Liability issues?
Hi do you have something for a c10 72 long horn bed to short bed? Thanks
What is the ruler with the scratching end called the one he uses at time 4:16
I notice your kit to shorten the long bed frame to short be is for c10s. Will it also work on the C20s?
100%
4:03 Back to the front
You will do what I say when I say
Back to the front
You will die when I say you must die
Back to the front
You coward, you servant, you blind man
Barking of machine-gun fire does nothing to me now
Sounding of the clock that ticks, get used to it somehow
More a man, more stripes you wear, glory seeker trends
Bodies fill the fields I see, the slaughter never ends
Soldier boy, made of clay, now an empty shell
Twenty-one, only son, but he served us well
Bred to kill, not to care, do just as we say
Finished here, greeting death, he's yours to take away
Back to the front
You will do what I say when I say
Back to the front
You will die when I say you must die
Back to the front
You coward, you servant, you blind man
Why am I dying?
Kill, have no fear
Lie, live off lying
Hell, hell is here
Why am I dying?
Kill, have no fear
Lie, live off lying
Hell, hell is here
I was born for dying
Life planned out before my birth, nothing could I say
Had no chance to see myself, molded day by day
Looking back I realize, nothing have I done
Left to die with only friend, alone, I clench my gun
Soldier boy, made of clay, now an empty shell
Twenty-one, only son, but he served us well
Bred to kill, not to care, do just as we say
Finished here, greeting death, he's yours to take away
Back to the front
You will do what I say when I say
Back to the front
You will die when I say you must die
Back to the front
You coward, you servant, you blind man
Back to the front
Back to the front
Back to the front
Back to the front
Back to the front
Question; why not just take the 12 inches out and make a straight cut instead of stepping it over? I'm assuming you're doing this because you had a hole in the bed where somebody was going to put in a jewelry gas tank or something. So you want to get rid of that hole. Is there a reason for strength or something to make that jog? I know you want to save the stakehold but if you just did a 12-in wide cut with straight edges right out of the center between the front of the bed and the fender well here why not do that? Once again is it just because you already had a hole in the bed and wanted to take that hole out? Or is there another reason. Now I'm taking notes by asking you this question cuz I'll probably have another question and I'll make another comment. Thank you for showing us how to do this.
The step is to retain or "keep" the stake pocket. If you just cut it straight you would end up eliminating the pocket completely. Again, there are many ways to skin a cat as they say, and you COULD remove the pocket by drilling or cutting out the spot welds and the straight cut the bedside and move the pocket separately and create a new hole on top, but we find this is easier and faster.
@@BROTHERSTruckPartsTV thank you for a heads up. I'm back and forth on whether I want to try this I'm not. I did watch another Brothers tech about sectioning the frame and the guide which I assume your company sells. The last time I was about to try this, I drove about 6 hours each way to go pick up a short bed frame. I've got a half a dozen of these trucks. So I do have a real interest in actually doing it or just ordering the bed parts from you thank you again for your reply
@@CAROLDDISCOVER-FINDER2525 Our pleasure!
Hey im about to do this to my 1970 c10 and have a question with the front when you cut the top of the bedside you said you needed to step over would it be possible to not do that just get rid of that pocket on the top of the bedside
Yep, you could do that.
I want to cut a '69 LWB to a SWB and cut the original bedsides and perserve the original paint and patina of the truck without any weld lines. Is this possible?
You can avoid the welded seam at the front of the bed, but the rear seam is unavoidable.
I am building a 1968 C50 into a pickup, I am needing to add about 3FT to the bed, any suggestions?
Section two beds together.
Will this kit work with a 71-72 longhorn pickup?
No sir, it will not. Sorry.
Hey there Dave! I m looking for 67-72 bed corners only. Couldn't find. No one makes them? Only the complete bed side?
Probably got to find another bed to cut up unfortunately 😕
@@A.R.T.Customs ok. Thanks for the reply. I'll keep looking
Are 1970 c20 long bed trailing arms longer than short bed please thks
Same length.
@@BROTHERSTruckPartsTV thank you
At 28:06 why did you use the 2X4?
To block the sparks from going directly in your face.
The camera is way too far away to understand what you're talking about You need more close up shots of the scribe tools, tape and the marks you're putting down.
Pause and zoom in on the areas in question. Problem solved. 😂
😬
Boo