@@manoknapula6971 Though it may be louder, performance is sacrificed! We tried this.... sounds great in theory, doesn't work as well as sourcing fresh ambient air utilizing the duct.
Thank's for letting me help with the install bro!! Turned out amazing and sounds EVEN BETTER! Surprisingly easy install. Anyone reading this, you got this! Install was a breeze with some little tricks 😉 Can't wait to see more done to this beast 🤙🏼
Just installed this bad boy in my black FK8. The install was a nightmare, especially the intake hose install. Your video helped me a lot, especially the bit about the rubber grommet on the bottom of the stock intake box. I was struggling trying to get the box out until I watched your video. The sound from the new intake sounds amazing!
Just installed the HVI as well for my FK8. Would've loved to use your video for reference but I got it done! Used your fog light video for my dad's SI.
I just installed the same PRL HVI (Street Edition) and after driving it a couple miles I got a rev matching system error and a engine emissions error. I checked all the wiring and everything seems fine. Did anyone else have this happen to them?
Congrats on the FK8! I’m sure you did it, but if not, I’d use some loctite on those screws that keep the panel on the air box. They tend to rattle out little by little over time.
I don't understand it I followed every step in this video and car is not running right I took it for a drive and not a code for emission problem and Rev match problem
Good stuff man! Great content since the beginning with the Si. Just wondering, are you considering doing an install on the J’s racing front grill? I think that grill looks sick, but, haven’t seen any install videos. I know you might not have the heating issues that the 17-19 yr have, cause 2020 came with a bigger grill. Well, at least that’s what I’ve heard tho. Nonetheless, congrats on that beast. Hope you enjoy as much as I do with mine.
We apologize for the lack of stickers, sometimes we run short. Please include in your customer notes in your next order to include more and we will make sure you get them :) The keychain, Tyler ordered that from our website in the merchandise section!
As much as I like the extra whoosing noise. I can't help but concern if I will get tired of the extra in a long term. My stock airbox makes the same noise but quietly so. My fk8 is a stage 1 tuned. After I drove it hard at a track, the intake noise became louder. Anyone has had this experience? hmm What do you think?
It’s like the turbo spool I don’t get tired of it and it’s easy to avoid producing the noise. End of the day it’s all preference. I’m sure you’ve made up your mind considering this comment was 1+ years ago
Stupid noob question but how do you make that noise....I just came from a automatic ext to my first manual Car which is a type r. I ain’t gonna do this yet until I break it in but how do I make that noise when parked? Do I have it in neutral and hit the gas? Hold in clutch, leave in neutral, and rev? Hold in clutch, put in first gear, then rev? Sorry for the dumb questions lol
how many miles should i have before i install this? i just got my 2021 boost blue R and i have this intake sitting in the garage. im currently on 500 miles!
Based on the mods he had at the time, it would be pretty even. Type r has 306hp at crank and dynos 280-295whp stock. SI with the 2860R turbo, and since he was tuned by Derek it should be around 295-305whp/290-300 torque as he normally stops around that area on pump gas.
Thoughts on how the intake sounds!!??
Sounds great 👍🏻
Sounds great , can never go wrong with the prl
If you removed the side cover the sounds would be much louder 🔥 sounds amazing
@@manoknapula6971 Though it may be louder, performance is sacrificed! We tried this.... sounds great in theory, doesn't work as well as sourcing fresh ambient air utilizing the duct.
@@PRLMotorsports Does this intake void warranty?
Thank's for letting me help with the install bro!! Turned out amazing and sounds EVEN BETTER! Surprisingly easy install. Anyone reading this, you got this! Install was a breeze with some little tricks 😉 Can't wait to see more done to this beast 🤙🏼
YO! thanks for watching and the help. Until next time :D
Do i need a tune after installing intake?
Nope
Just installed this bad boy in my black FK8. The install was a nightmare, especially the intake hose install. Your video helped me a lot, especially the bit about the rubber grommet on the bottom of the stock intake box. I was struggling trying to get the box out until I watched your video. The sound from the new intake sounds amazing!
Glad I could help
This was very helpful as was looking to clean my cone and gave me the confidence to tackle it 👏 cheers 🏴
And the new intake looks and sounds awesome!! love the sonic grey pearl!
That intake is Sick!!
Just ordered mine 😴😴
Ah yeah, you got the Type R. Nice man. Really like the color.
I LOVE SGP!
So happy you’re still in the Honda community! Congrats on the FK8 & I am here to watch your channel rocket 🚀
Nice PRL air intake plus reduce the heat soak! You will hear more turbo spool from intake!
Just installed the HVI as well for my FK8.
Would've loved to use your video for reference but I got it done! Used your fog light video for my dad's SI.
Thanks for being a long time supporter!
Ayee just realized you got the Type R, thankful for your Si vids.
Gotta love it. ! Makes our cars night and day
That sounds soo good!!
Great video bro !! I’m definitely going PRL for my 2020 Sonic Grey Type R
I just installed the same PRL HVI (Street Edition) and after driving it a couple miles I got a rev matching system error and a engine emissions error. I checked all the wiring and everything seems fine. Did anyone else have this happen to them?
Just install mine but soem reason I didn't here the whooshing sound did I fo something wrong?
Congrats on the FK8! I’m sure you did it, but if not, I’d use some loctite on those screws that keep the panel on the air box. They tend to rattle out little by little over time.
Our installation guide also suggests this :)
Do you have to remove the box to clean the filter? It doesn't look like a super easy design for cleaning the filter easily.
Nice work, clean install...... 👍
Dude, I have a bone stock 10th gen SI, can you please gas the type R so I can be even more excited to trade in
Hiw much boost are you making? Just installed it and can only hit 8 psi
You got a leak
My inlet hose didn`t have the PRL logo on it 😒..
I’d call and ask...
I don't understand it I followed every step in this video and car is not running right I took it for a drive and not a code for emission problem and Rev match problem
Hey IK you sold your Type R, but for the MAF sensor do you remember what kinda hex key you used to put in the PRL supplied bolts?
Did you look into PRL High Volume Intake MAF Housing Conversion Kit?
Yup, I’ll get one eventually
Sounds sweet
INDEED :D
Man I just bought my fk8 this week too..i love to do this soon
How loud is the "blow-off" noise whilst shifting normally (eco, low rev shifting etc)?
Louder than a rooster at 530am. It's more subtle when not under a WOT scenario, but still audible.
Did u upgrade ur waste gauge?
Sir I just wanna ask if you have any idea if an oem fk8 diffuser fits fk7? Thanks
Good stuff man! Great content since the beginning with the Si. Just wondering, are you considering doing an install on the J’s racing front grill? I think that grill looks sick, but, haven’t seen any install videos. I know you might not have the heating issues that the 17-19 yr have, cause 2020 came with a bigger grill. Well, at least that’s what I’ve heard tho. Nonetheless, congrats on that beast. Hope you enjoy as much as I do with mine.
Thank you for the support! No plans at the moment to swap out the grill.
Balor here..sounds sick dude
Thanks for watching my dude!
Install mine today but I didn’t have the keychain and stickers come in the box smh
We apologize for the lack of stickers, sometimes we run short. Please include in your customer notes in your next order to include more and we will make sure you get them :) The keychain, Tyler ordered that from our website in the merchandise section!
Can’t wait all your “how to” videos!!
As much as I like the extra whoosing noise. I can't help but concern if I will get tired of the extra in a long term. My stock airbox makes the same noise but quietly so. My fk8 is a stage 1 tuned. After I drove it hard at a track, the intake noise became louder. Anyone has had this experience?
hmm
What do you think?
I never get tired of it. Only really noticeable when doing pulls etc… that extra whoosh I like!
It’s like the turbo spool I don’t get tired of it and it’s easy to avoid producing the noise. End of the day it’s all preference. I’m sure you’ve made up your mind considering this comment was 1+ years ago
@@franklin6930 You're right.I ended up only going of the spoon filter. The noise doesn't increase as much as a dedicated box but it's fun haha
How come this intake
Doesn’t need a tune?😊
Nice!
thank you!
Does it need a tune? Or can you just install and go play?
Install and go have fun!
No tune for that?
When are you supposed to clean the air filter for the si
I got one too bro. Nice
where did u get your carbon fiber front lip?
Stupid noob question but how do you make that noise....I just came from a automatic ext to my first manual Car which is a type r. I ain’t gonna do this yet until I break it in but how do I make that noise when parked? Do I have it in neutral and hit the gas? Hold in clutch, leave in neutral, and rev? Hold in clutch, put in first gear, then rev? Sorry for the dumb questions lol
You’ll need the HVI intake to make that sound.
@@TTorres1183 so when I get it how would i do this noise though?
Yup
@@TTorres1183 I meant how lol.
Do you need a tune ?
how many miles should i have before i install this? i just got my 2021 boost blue R and i have this intake sitting in the garage. im currently on 500 miles!
In installed mine with 500 or less in believe.
@@TTorres1183 ayeee its 11pm here in cali rn i might bust a mission to install it lmao
Do it!
warranty out the window?
I’m ready for exhaust and window tint . Roll tide brother !! Lol
Is it ok to match this with the HKS Bov?
That’s a debate I don’t want to be apart of
@@TTorres1183 Understandable. Just gonna stick with the PRL HVI
Time to get the titanium turbo inlet!
Is the type r faster then your big turbo si that you had ?
Based on the mods he had at the time, it would be pretty even.
Type r has 306hp at crank and dynos 280-295whp stock. SI with the 2860R turbo, and since he was tuned by Derek it should be around 295-305whp/290-300 torque as he normally stops around that area on pump gas.
@@darkknight097 that is correct!
Alex Corral when he goes FBO and idk if he’s doing flex fuel with the R it’ll blow the Si out of the water
Notification Squad 🚗💨
I’m glad they are working!
👍🏻👍🏻🔥
What’s ur 0-60
3 years and counting
“You can hear the wastegate whooshing” 😑😐😑
That would be the factory recirculation valve :) Hope that's not the internal wastegate lol
What part of Alabama are you from? War Eagle BTW!
How much of a performance difference is there
With a type R compared to the SI
A huge difference
Completely different driving vehicles, being able to throw the TypeR into scenarios and corners you couldn't with the Si is indescribable.
It's a night and day difference I had a 2018 black SI and traded in for a 2019 SGP Type R and damn.!!!
Nice :-)
Hey, nice intake. I have K&N typhon intake, also very nice sounding (video on my channel) .
Thank you! I'll check your video out.
Damn all that work to the si and now it's gone?
shoutout to Frank @ PRL he packaged mine too lol
Frank does decent work!
@@PRLMotorsports I ordered mine for my 2019 CTR
Stock air box will always be superior, sounds good though.
Nice work 👌🏾 thanks to jake from State Farm
is it just me or does it eark type r owners when someone say the R lol
15 ads this whole video. Holy F**K
lol wastegate whoosh
Nice wastegate whoosh....