Building Office Furniture Set | DIY Computer Desk and File Cabinet | 自制电脑桌
Вставка
- Опубліковано 30 вер 2024
- Building Office Furniture Set | DIY Computer Desk and File Cabinet | 自制电脑桌
Our newly remodeled office needed more office furniture, so my wife asked me to build a modern desk for my son and a contemporary file cabinet for her.
- Drawer fronts: solid walnut, purchased from Crosscuts in Seattle
- Desk left leg: solid walnut, purchased from Crosscuts in Seattle
- Side panels: white oak plywood, purchased from Crosscuts in Seattle
- Top: Birch butcher block, purchased from Home Depot
- Finish: Varathane Natural Wood finish, purchased from Home Depot
- Finish: 3 layers of satin polyurethane
Affiliated links:
This was the edgebanding trimmer I used: amzn.to/2JfmdKZ
Kreg Pocket Hole Jig K5: amzn.to/3kyJWn1
Drawer slides I used: amzn.to/3tJaMwP
我做木工DIY用到(或推荐)的工具 / These are the tools I use : www.amazon.com...
This project was inspired by DFR Workshop
#dingsworkshop #diy #woodworking
You made this build look effortless! The design is so simple and modern, I love it!
Thanks for teaching!!! I learn a lot. God bless you more!!! Blessings from Mexico
Hi, awesome work. Would you please state the dimensions of the table?
话说领导可以批准升级一下三脚架，怎么给桌面上螺丝画面也会抖啊
当时应该是三脚架的一个脚在frame里面...手机录像就是这点，焦距太短
Im about to build a pc desk on my own. With 89% humidity on my area, will I get a warped table top if I dont install a c channel?
came for the desk, amazed by workshop
赞赞赞，期待更多作品：
This is the most technological wood furniture taller
Hộc tủ di động này ngăn kéo làm bằng gỗ sồi hay óc chó thế ad. Nhìn thợ làm thích quá.
Those cabinets are fireeee ❤️ Really nice.
Hi, what was the thickness and width of the left foot, what is 2" of 3-4" thick and 3" wide at 5:25 ?
Thanks
The tools❤🔥
Superbe boulot, j'adore, par contre la musique..... change s'il te plait!
Merci! Plusieurs personnes ont exprimé leur aversion pour la musique et je promets que je n'utiliserai cette musique pour aucune de mes vidéos à l'avenir hahaha
If I had the space, tools, materials, I would make my own, but, since I can only buy materials, there's no POINT in buying materials only - it'd make more sense to get someone else to make it. I need a better solution for my PC desk as my current one requires a custom fitting unit - EVERY affordable option, well, they're not an option since none of them would ever fit (the space I have) properly. :(
Hi Ding, 谢谢你的分享, 受益良多。能不能开一期视频，专门讲一下木材材料。最近想帮孩子们做loft bed, 和户外cubby house 但不知道用什么材料才安全呢。谢谢
Hi Vincent, 谢谢你的建议！ 做 loft bed，建议考虑 maple, walnut, oak, poplar。 给孩子做东西，要注意躲避使用化学处理过的木料 (untreated)
@@DingsWorkshop 谢谢回复。你的视频让我受益匪浅，我是刚刚入坑的新手。期待你的分享。
ممكن اشتغل عندكو انا بحب الشغل هادا
Beautiful build.
But the music is a little annoying
How many days did it take you to do this project from start to finish?
4 days. I vividly remember making both pieces during Labor Day long weekend, plus 1 extra day
Mohon bantuannya bapak. Saya berharap bantuan uang sedikit dari bapak yang dermawan.
جميل صراحة إبداع😍❤👏👏👏👏
That's beautiful! Nicely done.
Bagus ^^
Seattle people what a beast
esses pesinhos de 1cm embaixo do apoio da mesa me pergunto o quanto são úteis. Eu acho que perde a estabilidade da mesa, vai ficar dançando horizontalmente mais fácil
Muy bonito mueble amigo un saludo
Gracias amigo!
🇴🇲⚘
太能干了，膜拜
太棒了！各种工具飞舞！7:34的那种转头叫什么名字？
那个是countersink drill bit
沉孔钻
请问kreg那个黄色bit的tool叫什么？
哪个bit呀？
请问有没有哪种比较推荐的WoodStain? 希望是那种没有什么味道的。前一段时间买了油性的woodstain，味道一直很难散去，感觉很伤身体。
我用过的wood stain大多味道都很大。不过如果只是想显现木纹，而不是变色的话，可以用一些天然的东西比如beeswax, 核桃油之类的
Beautiful work. I’m new to woodworking. What kind of router bit did you use?
Hello! It was a 3/4" straight bit :)
Amazing wood working Crafts DIY...
Ae no japan vcs trabalhão com planeijados
very nice!
请问您的dewalt brad nailer是18gauge的吗？是不是这个size的做木工最有用？
对，是18 gauge的。和我16号的相比，18号的确实用的更多。
hello, I am very interested in this table, I want to make one myself, can you give the exact dimensions of all the details? I will be grateful to you!
Greetings! Here is the plan I made using SketchUp. Feel free to download: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
Fantástico abraços aqui do Brasil 🇧🇷
مجهود رائع 🤗
I love your tools collection
超赞👍
Those dewalt tools are sexy!
I know right?
Very well Done. is the tabletop panel bought from home centre as it is? As for the walnut wood, it looks very nice but wonder how you get them jointed and planed? Do you have such tools at your workshop?
yup, the top was bought from Home Depot, then I sanded it and applied 3 layers of polyurethane. The walnut, some had holes which I filled with resin + black coloring, then planed them flat :)
@@DingsWorkshop so you don’t have a jointer? How to remove the bow or cup or twist?
@@getthingsbuilt1342 nope, I don't have a jointer :) so I tend to avoid boards that has a very bad bow or twist, but we all know that's not possible to completely avoid them :) so when I have a board that has a bow or twist, I place the material on top of a known flat piece of board (usually MDF); I then add shims from bottom to make sure the material does not have any wobble when resting on the flat board. this way, when I run the material through the thickness planer, the material will end up having the top side absolutely flat. Now with the new flat side as my reference, I simply flip over the material and run the other side through the thickness planer to get that side flat as well :)
@@DingsWorkshop well explained. How effective is this? I’d recon it is more effective for longer piece but less for short piece? Maybe I am wrong. I also thinking it is maybe relatively practical for hardwood pieces as they are in a better condition( normally ). But for construction lumbers ( apparently we all use a lot), they normally in a pretty bad shape so that we had to joint them and plane them every time we use them if we want to be precise.... I don’t have either a planet or jointer but want to know what to buy next. If I need buy both or can simply buy a planer using your method. I had some very bad experience using the construction lumbers without planing and jointing and the table I made out of them is a disaster
@@nickharvey1648 so based on my experience, the thickness planer + shim trick works pretty well. And I'd even say it works better on shorter material vs longer ones (mostly because shorter material only needs shorter flat board as the base). Of course the best situation is to have both thickness planer and a jointer, but frankly, I've heard many people say the jointer is probably the last tool you need to buy in your woodshop, because there are many ways to make a flat surface on lumber :)
請問你貼皮會不會有甲醛，為什麼不直接都塗poly wipe-on?
我用的贴皮，它自带的热胶。但我不知道有没有甲醛。我喜欢在上poly之前涂一层stain, 可以让木头的纹路更好的显现出来
Amazing
Very similar to DFR Workshop, nicely done
Muito bom, faltou só o "yourself" do do it.
Can you make gaming chair???
what's the dimension of the cabinet and the desk leg?
Nice desk. Do you have plans available for purchase?
Here you go my friend, you don't need to pay me anything. drive.google.com/drive/folders/1dq867253HfJ39-WrkmlgVbD2YZcqxrFV?usp=sharing
Thanks!
awesome, i like this woodworking
amazing sir
I love woodworking but in my country k cant get woodworking schools and also equipments
I have taken only 1 woodworking class when I was in middle school. Majority of my experience come from trial and error :) it is important to understand each tool’s capabilities, and more importantly, I’m what ways can the tool cause accidents. Understand this will help in making a safer working environment. You can do it!
Awesome job. what is the size of the desk?
Thanks! It’s 74” wide, 31.5” tall and 25” deep
quite a fine craft wish it for sale. Excellent craftmanship.
Thank you for the compliment!
DIY with Heavy Machinary... I see DeWalt every where.... Appears to a sponsored video... If not then speak to them and get some share from their marketing budget.... Cheers
Not sponsored. The reason why you saw dewalt everywhere is because that’s the only brand of batteries I have :)
@@DingsWorkshop Well I'd still suggest to check with DeWalt for sponsorship... With the valuable time spent doing video... And with such high viewership there should be some monetization from the company too... Cheers.
I super liked the desk prepared, iland would like to have one for Covid WFH.
You can work as a wood-officer, not like a woodworker with wood-dust, sweaty and clutter of tools and plenty of wood pieces on the floor. Professional for everything. I can image you did all in a workshop equipped with full A/C. I admire of that. 👍😍
I did the same project few months ago with second role as i mentioned above (amateur woodworker) 😂
thanks for the compliment!
你的棕色木头在哪里买的啊？home depot 有吗？
棕色的是walnut, 是在西雅图这边一家叫做Crosscut的木材店买的
有些 Home Depot 也有的，但选择不是很多
按尺卖的，可贵了。。。
Great job sir
Ok it’s been a while but do you know the general cost of all of the wood
ap Jo iron se Laga rhe Hain ye kya h
i like video .i always learn your videos
Nice
真不错外观时尚大方，
谢谢！
Desk Dimensions?
要是能听到锯子的声音就更好了
👍🏿👍🏿👍🏿
Good quality and nice, thank you so much
it looks nice, do you mind sharing the plan?
木匠牛
But I don't have all these tools
Slowly accumulate :P Black Friday is coming up lol!
博主在澳洲吗？能预定小抽屉吗
我在北美
Mantap.....
You brilliant bro… Simple, creative, modern design with a master touches… peace
Thanks!
Its nice
Excellent work congratulations !!, a query what type of router bit do I use to make the lids of the drawers?
I used 3/4 inch straight bit
👍👍👍
i like . god job
Beautiful design and you make this look so easy. Question. What is the finish of the desk top? Is it a veneer or finish? Been looking to add furniture pieces to an existing furniture but can’t match or find the color/style but it’s exactly the same color/finish as your desk top. Thank you.
Thanks! The top is solid wood butcher block finished with polyurethane
MAchines wow...
👍👍👍 👍👍👍
DIY you only need a lot of high cost tools….
You don’t need a lot of high cost tools to do DIY. The high cost tools simply allows an individual to do a task faster than using hand tools. Thus it shall be considered as spending money to buy time, which is a very good deal :)
Neat Clean Beautiful
Good job 👍👍❤️❤️❤️
太漂亮了！
wow
What is the little red jig in your hand that you were using to trim off the edge-banding?
It's a edgebanding trimmer with tungsten blades. This is the one I bought: amzn.to/2JfmdKZ
What does calls these type of wood?
the side panels are white oak plywood. the drawer plates are solid walnut. table top is birch
👍👌
请教一下，学木工需要什么特别能力，儿子十八岁在加拿大温哥华想知道学木工难吗？
我觉得兴趣，信心，小心。这三点是很重要的软项要求。对木工有兴趣，并且有信心来进行不断的尝试和经验的积累，再加上小心使用工具。
@@DingsWorkshop 谢谢，在国外人工贵，干什么都缩手缩脚
Beautiful work my friend!!!
Muy fácil genial
¡Gracias!
胶水，夹子，西式木工的灵魂啊
没啥灵魂不灵魂的。重要的是把东西做出来就行了 :)
Awesome
Size about ?
74" wide, 31.25" tall, 25" deep
hello could you give me the dimensions of the lid and the drawer?
HI! I'm not sure what lid is...but the top is 74 inch x 25 inch, 7 inch x 16.375 inch. Here's my plan, you can have for free: drive.google.com/drive/folders/1dq867253HfJ39-WrkmlgVbD2YZcqxrFV?usp=sharing the plan is done using SketchUp so you can open the 3D file for other measurements as well. Cheers!
Nice work 😀😀👍👍👍
What finish did you put on the white oak side panels?
I used natural wood stain + 3 layers of polyurethane
Nice one. Any link for complete project measurements?
Here is the plan I made using SketchUp. Feel free to download: drive.google.com/drive/folders/105xSWGjEnQtw6UqR3PSkJ77U6dfjHYUa?usp=sharing
Ding's Workshop cool thank you 😃
Nice work, I like the wood combination and the simple design of the walnut leg.
求问这个table top哪买的
Home Depot :)