Increíble !!! cerca de 1000 toques para activar el subwoofer, lógicamente he repetido para ver el video 20 veces y no me he enterado. Seguramente lo has explicado perfectamente y los pasos directos y concretos...el problema será que me hago mayor !!!
I have the KDC-BT282U and my amps just not turning on from the remote wire do I need to like do something in the settings because I can’t figure it out at all
Hi, u can check in settings if it's turned on . Pres volume knob enter Functions , turn the volume knob to select Audio control then press the knob, turn volume knob and select Subwoofer SET , turn volume knob to select SW SET ON.
@@yeetusbeefus7528 if it's turned off in the settings when it don't give out voltage of course if it's turned on in the setings and still no voltage when it's faulty.
@@yeetusbeefus7528 not the best idea because it will drain your car battery, in that case better connect to power antenna wire it will turn your amp when u turn off the unit.
Hi , what do you want to do? This video is how to change preautpust for subwoofer. If you want to adjust bass/ treble setings you need to go to audio control setings. Pres volume knob to enter function menu , turn it until you see audio control and then you can find treble/bass setings.
Also,Can I connect a hi low converter into a speaker line with a speaker hooked onto it? Basically can I connect convertor and speaker on one channel simultaneously?
These subwoofer function only works on the RCA output or on any of the rear speaker wires? I ask this because my sound module has no rca input, just wired. Thank you.
Hi 👋 . Depends on yor radio for some you can change but not for all models . You can try to change and it will be clear if this is possible with your radio ;)
@@v.j5135 Hi 👋. Thank you so much for answering me. Unfortunately the model I own KDC-MP2055U does not have this function. The subwoofer function is limited to the RCA connector only. I solved the problem by buying a used and very cheap Sony Xplod XM-502Z 250w Amplifier. I'm using it only for SUB. Very happy now 😁
I have this model. Could you please tell me how to get my subwoofer working with spotify? The sub works perfect with all other functions EXCEPT internet media. Thanks.
I have a KMMBT312-U which is very similar, but I don't know how to get into the pre-output mode. I've tried to follow along with your video cause it's seems to be just like mine. The only thing I have is Subwoofer on/off, which does nothing. My sub is not a powered sub. My head unit has front/rear and SW RCA outputs on the back. I connected the RCA cables and then cut the other ends to connect the pos/neg. But cannot get any sound.
hey guys, im stuggeling with my woofer... maybe someone can help? i have an active subwoofer, who worked with my old sony radio. Now with my new kenwood everything is workin exept the woofer... i controlled the signal from rem, it only has max 6V. My woofer dosnt go on with this low V. So i took another 12v+. Now the power signal is ligthning. But the woofer wont make a sound...Someone has an idea where the problem is ? i tried everything... sry for the bad english greedings
@@v.j5135 got an kdc-bt450DAB I#m pretty sure i did the right setting, if i go to audio setting it says subwoofer settings on. And ty very mutch for the quick reply.
Hi, maybe you turned off subwoofer . Depends on the model sometimes you can turn off. But your amp is working? Do you have any lights on ? Hard to say anything when can’t see.
Hi. Watch from 0.47 seconds- first go to standby mode and press volume button than turn it until you see initial setup press volume button again and turn it until you see SWITCH PREOUT
Hi this unit doesn't have Bluetooth. For some other models with Bluetooth you need to go change some settings if you hear only front speakers playing sound and only if you are streaming audio from your phone CD or radio work as it should.
Increíble !!! cerca de 1000 toques para activar el subwoofer, lógicamente he repetido para ver el video 20 veces y no me he enterado. Seguramente lo has explicado perfectamente y los pasos directos y concretos...el problema será que me hago mayor !!!
I am extremely grateful for your video, now I can enjoy my base box again.
De todas formas gracias por subir el video.
Great! Are there any remote controls for Kenwood KDC-BT45U?
I have the KDC-BT282U and my amps just not turning on from the remote wire do I need to like do something in the settings because I can’t figure it out at all
Hi, u can check in settings if it's turned on . Pres volume knob enter Functions , turn the volume knob to select Audio control then press the knob, turn volume knob and select Subwoofer SET , turn volume knob to select SW SET ON.
@@v.j5135 actually the issue was a faulty headunit! The remote wire terminal won’t give out voltage
@@yeetusbeefus7528 if it's turned off in the settings when it don't give out voltage of course if it's turned on in the setings and still no voltage when it's faulty.
@@v.j5135 yup when it was on still no voltage but you can wire the remote wire from your amp into the red wire as well as a work around for it
@@yeetusbeefus7528 not the best idea because it will drain your car battery, in that case better connect to power antenna wire it will turn your amp when u turn off the unit.
Thank you, fixed mine
I have a kdc 360u and I can't figure out how to get to the bass and treble settings, it shows switch preout and then swpre sub-w
Hi , what do you want to do? This video is how to change preautpust for subwoofer. If you want to adjust bass/ treble setings you need to go to audio control setings. Pres volume knob to enter function menu , turn it until you see audio control and then you can find treble/bass setings.
I am getting no such options on my Kenwood KRC208s.How do I turn the preamp out ON.Thanks in anticipation.
Hi 👋 your unit don’t have this option. Maybe the best option for you is Hi-low converter.
But it does have rear preouts and user manual mentions their output specs..!
Also,Can I connect a hi low converter into a speaker line with a speaker hooked onto it? Basically can I connect convertor and speaker on one channel simultaneously?
Honestly I never had this unit , jus checked manual and it has pre outputs but don’t have option to switch for subwoofer. I can’t find in manual too.
Thank you 🎉❤
You're welcome 🤗
Esta opción es para conectar un subwoofer en la parte trasera de color morado?
YOU ARE THE FC**ING BEST 🎉🎉🎉 IT WORKED FOR ME IN A KDC-4554U 🎉🎉 THANKS SO MUNCH!!
Me sirvió muchas gracias👍
It's 100% working thanks A lot🌹😊
These subwoofer function only works on the RCA output or on any of the rear speaker wires?
I ask this because my sound module has no rca input, just wired.
Thank you.
Hi 👋 . Depends on yor radio for some you can change but not for all models . You can try to change and it will be clear if this is possible with your radio ;)
@@v.j5135 Hi 👋. Thank you so much for answering me.
Unfortunately the model I own KDC-MP2055U does not have this function. The subwoofer function is limited to the RCA connector only. I solved the problem by buying a used and very cheap Sony Xplod XM-502Z 250w Amplifier. I'm using it only for SUB. Very happy now 😁
I have this model. Could you please tell me how to get my subwoofer working with spotify? The sub works perfect with all other functions EXCEPT internet media.
Thanks.
Ever figure it out?
I have a KMMBT312-U which is very similar, but I don't know how to get into the pre-output mode. I've tried to follow along with your video cause it's seems to be just like mine. The only thing I have is Subwoofer on/off, which does nothing. My sub is not a powered sub. My head unit has front/rear and SW RCA outputs on the back. I connected the RCA cables and then cut the other ends to connect the pos/neg. But cannot get any sound.
Did you find out how to fix this
hey guys, im stuggeling with my woofer... maybe someone can help? i have an active subwoofer, who worked with my old sony radio. Now with my new kenwood everything is workin exept the woofer... i controlled the signal from rem, it only has max 6V. My woofer dosnt go on with this low V. So i took another 12v+. Now the power signal is ligthning. But the woofer wont make a sound...Someone has an idea where the problem is ? i tried everything... sry for the bad english greedings
Hi , did you checked subwoofer settings? Maybe it’s turned off in settings? What is your new Kenwood radio model?
@@v.j5135 got an kdc-bt450DAB
I#m pretty sure i did the right setting, if i go to audio setting it says subwoofer settings on. And ty very mutch for the quick reply.
OK that’s looks strange . Did you buy that kenwood kcd-bt450dab new from the shop? May be it’s defective?
a lil late, but with bt you have to activate the subwoofer seperate.
@@tims.701 how do you do this
I have a 5200bt and don’t have initial settings, any ideas on what I can do
The amp outputs stopped working, I have no signal from them, any ideas?
Hi, maybe you turned off subwoofer . Depends on the model sometimes you can turn off. But your amp is working? Do you have any lights on ? Hard to say anything when can’t see.
Thank you! Worked on my KDC-BT43U
1:19 скажите что такое и не играет флэшка. READING
Flash drives don't work on radios unless you use a computer
I can't work out what you're doing??
Hi. Watch from 0.47 seconds- first go to standby mode and press volume button than turn it until you see initial setup press volume button again and turn it until you see SWITCH PREOUT
Press the volume button
Bro plz give Muzik name
Hi track name Frost :) ua-cam.com/video/NK3_1lFOTGk/v-deo.html
Thank you
You're welcome :)
This is to fix the Bluetooth not working for my subs? My radio does fine but when it's hooked up to my phone it doesn't work
Hi this unit doesn't have Bluetooth. For some other models with Bluetooth you need to go change some settings if you hear only front speakers playing sound and only if you are streaming audio from your phone CD or radio work as it should.
Thanks
You're welcome ;)
Cl all
?