Superduke 1290 R/GT Akrapovic DB-Killer Removal : Fast & Easy How To Video.

Поділитися
Вставка
  • Опубліковано 21 кві 2020
  • Hi everyone , in this video i'm showing you how to remove a db-killer or silencer on my 2020 Ktm Superduke GT with Akrapovic slip on.
    Showing you easy and quick steps how to take the exhaust off and what works best for me when slapping the devil out of the silencer to get the db killer out. Also showing you the sound of my akrapovic before and after the db killer is out but also the sound without an exhaust on it. Trust me , a 1290 Superduke engine without an exhaust is...pretty loud.
    Music in my video by :
    share.epidemicsound.com/sF9hd
    The 2020 Super Duke GT produces an impressive 175 horsepower, with 104 lb-ft of peak torque available.
    Upgrades :
    Akrapovic Exhaust
    Ktm Power Parts side cases
    Ktm Power Parts windscreen
    Ktm Power Parts heated seat front and back
    Ktm Power Parts carbon fiber tank cover
    Track Pack
    #KTM #Superduke #db-killer #akrapovic #2020 #exhaust #howto
    #motorcycle #ride Buy me a coffee if you want so i become more active! Thx
    www.buymeacoffee.com/smokey103 Wanna Buy something on Amazon?
    Use my link and i will get a small fee at no extra cost for you : amzn.to/3uc3AsT
    Buy me a Coffee so i get more active in my videos :
    www.buymeacoffee.com/smokey103
    My Gear :
    GO PRO 9 : amzn.to/2RD1chH
    GO PRO 8 : amzn.to/3hK4kD9
    Sony A7s : amzn.to/2RvRy0t 👕 Smokey Webshop : bit.ly/3kDbflb
  • Авто та транспорт

КОМЕНТАРІ • 80

  • @LifeofSmokey
    @LifeofSmokey  4 роки тому +17

    Sound is much deeper , more aggressive but not a whole lot louder. Perfect!
    Ps : make sure you use some sandpaper on the baffle and make it a little smaller so it fits better when you put it back in.

    • @VFactory-vl5fi
      @VFactory-vl5fi Рік тому

      Sand paper? Really? Will this work on metal?

  • @vinpagal5838
    @vinpagal5838 2 роки тому +1

    Thanks for the idea man. Just took out mine yesterday. Cool

  • @TheZall
    @TheZall 8 місяців тому

    Thanks for the suggestion
    Didnt think of it before 😂
    Good job man

  • @talbi89
    @talbi89 Рік тому +1

    mate your vid helped me out I was struggling with the baffle on my euro 5 akra for my honda forza 750 I tried to pull from the front with some grips and bent a little but a few socket extensions later from the back and it popped out!

  • @ross5506
    @ross5506 4 роки тому +1

    Wonder if this can be done to the dead silent Akrapovic stock can on the 2020 1290 R? Never go full regard, lol.

  • @ethanlei7590
    @ethanlei7590 3 роки тому +3

    "Are you thinking what I'm thinking?"
    Y E S

  • @houldendub
    @houldendub 4 роки тому +5

    Mine had the anti-tamper bolt for the DB killer 😭 Had to take it into a shop to get it out, got bored after a few hours!

  • @VFactory-vl5fi
    @VFactory-vl5fi Рік тому +1

    Great video. I did just what you did, even with the WD40, though I had to wrap mines in a plastic bag and stick it in the freezer for a few hours. Helps a lot.

  • @Trackdaychampion
    @Trackdaychampion Рік тому

    I've been running mine without a slip on for few weeks now. Took it off with every intent to replace it, but man the Noiz...

  • @majed_alshaya
    @majed_alshaya Рік тому

    Good luck 👍

  • @Charliano700
    @Charliano700 Рік тому +1

    Thinking slide hammer, without removing the slip on. Just a thought.

  • @devonbiker
    @devonbiker 3 роки тому +2

    Hi Smokey. Did your Ackrapovic already come with the hole drilled so you could remove the dB killer bolt? Other videos I’ve seen show they have to drill the carbon fibre themselves.

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому +3

      Devonbiker Comes with a hole like i showed you in the video in Europe bud 😎👌

  • @patricematte9941
    @patricematte9941 2 роки тому +1

    I have superduke 1290r 2022 acrapovich oem. I try to found bolt to remove but no hole at all and if im look inside i dont see bolt . Heating up.and remove? Press fit?

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому +1

      Sometimes you have to drill the hole yourself 😅

  • @IMS21
    @IMS21 2 роки тому +1

    Dank je voor de clip! Denk je dat het bij de yamaha mt09 2021 akra uitlaat ook zo is?

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому +1

      Bij mijn kameraad op zijn Mt07 was dat ook soortgelijk werkje ja. Is uitgevoerd door Motorweelde bij Mario 😎

  • @Marty43ful
    @Marty43ful 4 роки тому +4

    Two of my friends have gone with the de-cat route. Just got a pipe and the de-cat dongle. Both bikes done a few thousand miles now with no apparent problems. Now, they ARE loud! I have bought the Bodis de-cat pipe and the Healtech dongle. Not fitted yet as I want to break in with standard fittings. I know fuel mixture can be lean without the cat. I don’t like that noise limiting exhaust valve though in the cat and the new pipe would solve that problem. What are your thoughts?

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому

      I had the full titanium evo line on my 2015 SD-R and i absolutely loved the sound and how loud it was and spitting flames haha. But i bought the GT for some more "touring" style riding. So i don't want it to be way to loud it gets on my nerves when driving longer distances. I also live close to the German boarder and cops in Germany do not fuck around when you have a loud exhaust. Close to the Nurburgring there are always cops checking for loud exhausts. They will stop you , do a db check and when it's over the limit it's a 300$ fine. And now you have 2 options , 1 you put in your db killer AFTER you paid and they will check again. If it's fine you can go on your way. Or option B if you don't have your db killer with you....your bike is not going anywhere anymore. You can call a towtruck and get your bike back over the boarder that way. 😅

    • @Takahatchi
      @Takahatchi 4 роки тому +1

      I have been trying to find a de-cat pipe for My 2020. Where can I get one ?

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому

      busamaster That i don’t know 😊

    • @Takahatchi
      @Takahatchi 4 роки тому

      Ok

    • @Marty43ful
      @Marty43ful 4 роки тому +2

      busamaster . Many different de cat pipes on the market. I went for the Bodis one as you can re fit the black plate which hides the cat and makes the bike look tidier. Most others you can’t. Got mine off EBay. Same fit as 2019 of course

  • @ebaensey2983
    @ebaensey2983 Рік тому +1

    Stock pipe on mine sounds like ad... pipe. Same db killer inside. May drill it out. Lots cheaper? Anyone done this?

  • @LPFanKillerbrot
    @LPFanKillerbrot 3 роки тому

    What size was the nut? :)

  • @ADVBrett
    @ADVBrett 4 роки тому +2

    Love the intro (how did you get that!?!?) Love the new sound even more!! Wonder what an Akro minus decibel killer would sound like on the GS..... hmmmmmm

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +2

      The Db killer will never make your ears bleed so don’t worry. The growl is alot deeper and it sounds like it breaths better 😁 The intro is a custom animation made for me be a friend. I own a couple of UA-cam channels and we make some animations from time to time. That’s my Suzuki Gsxr 1000 , and the helmet says 103 wich has been my motorcross number for years. 13 Was taken so i picked 103 😁. Couldn’t find a Superduke to animate haha.

    • @ADVBrett
      @ADVBrett 4 роки тому +2

      Life of Smokey It’s certainly very well done Smokey!! Keep up the content, thoroughly enjoyed going through all the vids last night!

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +2

      Brett Campany First time i show my face and talk on UA-cam haha. I’m frikking nervous all the time. But it’s good for my English haha.

    • @davep6286
      @davep6286 4 роки тому

      Life of Smokey: your English is much better, than thousands that live here and call it home 👍🇬🇧

    • @davep6286
      @davep6286 4 роки тому

      Brett Campany: check out 650ib he has one on his, and loves it❤️

  • @Schule28
    @Schule28 9 місяців тому

    on mine there wasn such a bolt i had to drill myself.

  • @nathanschmidt57
    @nathanschmidt57 4 роки тому +1

    Can you give me opinion between this and new xr 2020?

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      Nathan Schmidt The XR is a four cilinder sport cruiser , the Ktm is a 2 cilinder high power and very high torque beast that loves to go fast but it has good cruising options to. 2 Totally different engines...both are good. I want more power and fun so i’m more for a 2 cilinder engine 😎

  • @synranlangkharlyngdoh8784
    @synranlangkharlyngdoh8784 3 роки тому +1

    Funny.... I'm not clicking into this video because I have one or any of those 😄 just a huge biker fan 😃

  • @ridingforfun151
    @ridingforfun151 3 роки тому +1

    Was de bout die de db killer op zijn plaats houdt niet gepuntlast. Die van mij dus wel.

  • @erdemkucuk4219
    @erdemkucuk4219 4 роки тому +1

    Hey smokey what do you think about the 2020 superduke?

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +4

      Erdem Kucuk It’s the same as 2019 but i have had alot of fast motorcycles including a Superduke T but for some reason this V-twin engine keeps making me a little bit wet between my legs 😂. It’s not the speed because i’m kinda used to that but the way it delivers power , the amount of torque it makes with the sound of the engine is just one scary combination 😁

  • @Bornie205
    @Bornie205 4 роки тому +2

    Nice one Smokey, great tip - do you know if the baffle can be re-installed afterwards if required ?

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      stephen born yes you can but you need to use sandpaper or something and make the baffle a little bit smaller because you really gotta work for it to get it out with a hamer 😅👌. Good luck! Sound so much better without it.

    • @davep6286
      @davep6286 4 роки тому +1

      stephen born: on 13 plate R1cp the little rubber grommets are on the out side of slip-ons and there Allan key m8 or m6 about 15mm long, once out they fit under rear cowl or seat. On a warm exhaust they slip in and can turn to line up fixings. On a cold bike they need a bit of lube, a drip from dip stick. Always carry them with us when out playing, on the off chance we meat a jobs worth, kind of stop. But had NO problems even riding and going round Nurburgring. May be of some help, for ya 👍🇬🇧

    • @stfuliberal
      @stfuliberal 4 роки тому +1

      The hammered end is crushed, good luck getting it back in, guess you could cut off the damage.

    • @mvf76
      @mvf76 3 роки тому

      @@stfuliberal same, same.

  • @christophemissinne3932
    @christophemissinne3932 4 роки тому +7

    Or you get some freeze spray; or an ice pack.
    Cool down the DB killer, metal contracts... and it'll move like sh!t through a goose(no hammer nor removal required)

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +2

      Christophe Missinne Damn now that’s a good idea! 😂👌👍

    • @steventhompson4948
      @steventhompson4948 3 роки тому +1

      There is only one Christophe Missine and I used to work with him at EAT🤣Fancy seeing you here👍.
      I am retired now and own a S1000R and this bike the KTM 1290 GT.
      Steve T

    • @christophemissinne3932
      @christophemissinne3932 3 роки тому

      Hiya fella find me on FB

    • @christophemissinne3932
      @christophemissinne3932 3 роки тому

      @@steventhompson4948 find me on FB or messenger for a chat mate

    • @steventhompson4948
      @steventhompson4948 3 роки тому +1

      Not on FB mate. Hope you are doing ok.

  • @miguelreus3769
    @miguelreus3769 4 роки тому +3

    Match better!!!

  • @juunas9620
    @juunas9620 Рік тому +1

    Äi

  • @Pmason718
    @Pmason718 3 роки тому +1

    With the DB killer installed how does the sound compare to stock?

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      It’s maybe one decibel louder with the db killer out but the sound is way deeper. So not alot louder but it sound way more powerful 😁

    • @ricklemon594
      @ricklemon594 3 роки тому

      Good question. Wish the first guy would have answered it correctly. People don’t even read the question. Anyone else want to try? Sound/decibel level comparison stock vs. Akro with DB killer INSTALLED? Anyone?

  • @f.p1775
    @f.p1775 4 роки тому

    What did you do with that dB killer? Send it my way plz ;)

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      F.P Have to take it with me when going to Germany 🙈. It’s to loud now and i get pulled over in Germany and i can’t shut the beast up that bike is going nowhere anymore. German police are not happy with loud motorcycles 😂

    • @f.p1775
      @f.p1775 4 роки тому +1

      Life of Smokey that is a load of Scheisse 😂 just bought the same exhaust, deciding now if I should decat and remap 🤔

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      F.P F.P I do not , i repeat , i do NOT recommend going decat 😂🙈. Giant flames will shoot out of it but i’m not kidding , we had earplugs in when we started up the Superduro last week. That Austin Racing is alot shorter then the Akrapovic but still , removing the cat makes it soooo loud 🙈

    • @f.p1775
      @f.p1775 4 роки тому +1

      Life of Smokey eh? (Me pretending to be deaf 😂) I will give it a try just out of curiosity 😅! Thank you for the heads up tho :)

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      @@f.p1775 You have to try it! Simple as that haha. Upload on youtube and send me link lol

  • @heykat18
    @heykat18 4 роки тому +2

    Would sound even better removing the cat and adding an arrow mid-pipe

    • @LifeofSmokey
      @LifeofSmokey  4 роки тому +1

      heykat18 i 100% agree with that 😁. But i live close to Germany and they have the best roads ever. Including The Nurburgring ofcourse 😊. And German police does not f*ck around when they catch you with an exhaust over 94db. It’s not only a fine but they also make your bike illegal to ride in Germany on the spot....bad situation if you’re 4 hours away from home 😅🙈

    • @heykat18
      @heykat18 4 роки тому

      Life of Smokey when I removed the cat it didn’t increase that much definitely not over 94 dB. The sound was just a deeper rumble and that’s with the silencer removed.

    • @heykat18
      @heykat18 4 роки тому

      Here is a 6 sec clips so you have a Reference point. ua-cam.com/video/G38YBgiV-xE/v-deo.html

    • @davep6286
      @davep6286 4 роки тому

      heykat18: your 6sec show, was tha 94db on tick over? Would be nice to hear it at 5to7thou😎😱👍

  • @devonbiker
    @devonbiker 3 роки тому +1

    I just bought and fitted a scorpion Red on my GT. It sounds nice but I'm still curious how it compares to the Akrapovic? Is it worth upgrading? Here's a clip - ua-cam.com/video/PlaIRNz7GLY/v-deo.html

    • @LifeofSmokey
      @LifeofSmokey  3 роки тому

      The Akra sound very deep and a little louder then the original one. But still within limits. On most motorcycles i always take the Akra because they sound very deep but not to loud so you can still do alot of miles without getting annoyed by loud noises 😊

    • @devonbiker
      @devonbiker 3 роки тому

      @@LifeofSmokey Did you watch my video clip? I know its subjective but how would it compare?

  • @blankmindtheory3446
    @blankmindtheory3446 Рік тому +1

    Mod ur cat or remove jt, get an even better sound

  • @vasokrunic
    @vasokrunic 4 місяці тому

    Is the same on Akrapovic for Honda xadv 750 2023?

  • @MrSnipershot
    @MrSnipershot 2 роки тому +1

    Ik krijg die bout dus niet los in de uitlaat 😂🥲

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому +1

      Is ook een dopsleutel 8 dacht ik. Je hebt ook van die klop schroevendraaiers 😅.

    • @MrSnipershot
      @MrSnipershot 2 роки тому +1

      Ohh ik zie nu pas, dat de vorige eigenaar deze heeft vastgelast. Sad...

    • @LifeofSmokey
      @LifeofSmokey  2 роки тому +1

      @@MrSnipershot is origineel vastgelast. Is op de sar ook zo 😁