3:54 - SC Project w/ no db killer 4:52 - SC Project w/ short perforated 1x close end 5:51 - SC Project w/ long perforated 2x close end 6:48 - SC Project w/ honeycomb "strainer" 8:32 - MIVV w/ no db killer 9:28 - MIVV w/ short perforated 1x close end 10:24 - MIVV w/ long perforated 2x close end 11:46 - MIVV w/ honeycomb "strainer"
Braddsh this video helped me out. You saved me a lot time. Know I value your time for putting this all to a sound test. I like the strainer how it maintains the bass. Thank you.
I bought the the short and the long one. Settled on the long for my xsr900. Just the right amount of reduction while preserving the beautiful sound of a triple.
Additional ideas.sss = angle of resonator-assembly to top silencer (hot exhaust convection during starting-idling) = other pipe go to bottom-silencer (different size, difference by 3x area) Build triangle-oval shape with 3x-and-1x or 1x-and-3x tailpipe(endcan to tailpipe to face of tailgater). Can rotate triangle-oval for more efficient flow after tuning. Tune for starting-idling, cruising, peak torque (piston is digital, pulse of air is volume-area), peak flow is hp. Insert surpressor for bass-note ground-shake and idling pitch for pedestrains
nice one brad... although medyo 3 years late na, pero malaking tulong to pra saakin na ngaun lang magkakaroon ng xsr😅, thank you, nga pla may resonator ba yung elbpw na gamit mo?
Bro nice review... I think all db killers you showed performs well, it just depends on which exhaust you are putting it in. As I dont trust my ears anymore due to use and abuse, I would use a db sensor, no need to buy an app based will do aleast you'd know if there really is reduction in noise.
@@Rubberfoxy ofcourse that's why i said it's a resonator. Catalytic is on mid pipe and it has a lot of metal compounds not some strainers and super restrictive Resonator and catalytic have huge difference
Hi Bro. Loving the channel and Yamaha XSR155 Videos. With the 1st exhaust the 1st & 3rd silencer sounded the best. With the 2nd exhaust the 2nd & 3rd silencer sounded great. Difficult choice ;)
Great video bro. Just wanted to ask, you dropped the db killer into the exhaust at 4:40 and just installed it. Did it sit straight inside the exhaust or did you have to adjust it? Cause mine just points to a side inside the exhaust.
@@SaparootYai you should probably do a bit more research. Or better yet, write two wheel dyno who did my MT10 and ask them about it. Not all bikes are the same.
@@ScramblerGorilla thanks for the update as I'm looking to swap out mine but thought u needed a fuel controller so replace the whole system and good to go?
Hello kuya giving some fun fact Ung sinasabi niyo po na may strainer is catalytic converter All stock exhaust ng mga big bikes like super bikes is merong catalytic converter one pf the purpose nun is to prevent the excess power to leak out Parang ayun ung magpeprevent ng backfire ng isang exhaust lalo na kapag magpapalit ng elbow at after market exhaust So kung sakin ang tatanongin Best na ilagay ung catalytic converter sa may mismong elbow then pili kayo kung saan sa db killer ang gusto mo Both long ang short is ok naman pero mas maganda ung long para sakin then ung catalytic converter ilagay mo sa mismong elbow para safe ung makina for backfires Ayun lang po 👌😁
Bro what is the size your last db killer try to soundcheck for mivv canister.. because my xmax3oo I use also mivv canister ilike your last db killer wd strainer now I wanna know what is the exact size or the TIA BRO ride safe
Thanks...!!! I'm looking for one of those. So...I would like to ear the second option of dbkiller...but... installed in the tube instead of exhaust. That mean the dB killer must be installed in other direction. Thanks friend...!!! From Spain... Regards.
Hi sir. Bumili din ako ng SC project para sa XSR155 ko, ganyang ganyan din. Sabi po nung nagiinstall na nasasakal daw po yung engine pag nilagay ang DB killer. Advisable ba na hindi ilagay? More power sa page mo sir!
@@ScramblerGorilla salamat bossing hehe. yung ibang mga “gutom” na nanghuhuli kasi pag nasa loob yung silencer sinasabi open pipe pa rin daw 😩 sarap basahan ng memo ng LTO eh
hm yung mivv pipe and dB killer with strainer bossing. nice blog anyway. it helps to riders like me who have no time to do what you have showed in this blog. Ride safe bro!
Bro pano mo natanggal yung nasa loob ng old bar end mirror mo? Same kasi tayo ng bar end mirror yung maliit na bilog gusto ko na sana mag palit sana masagot mo ko lods haha
3:54 - SC Project w/ no db killer
4:52 - SC Project w/ short perforated 1x close end
5:51 - SC Project w/ long perforated 2x close end
6:48 - SC Project w/ honeycomb "strainer"
8:32 - MIVV w/ no db killer
9:28 - MIVV w/ short perforated 1x close end
10:24 - MIVV w/ long perforated 2x close end
11:46 - MIVV w/ honeycomb "strainer"
2nd exhaust with the 2nd silencer sounds so good!
agree
Braddsh this video helped me out. You saved me a lot time. Know I value your time for putting this all to a sound test. I like the strainer how it maintains the bass.
Thank you.
DB Killer helps a lot especially during deceleration and it avoids loud backfire noise
bro npaka simple at humble ng vlog mo...nangangamoy xsr na...magkakaron n din ako this dec adv gift this xmas at s bday ko sa jan...thanks!
Thanks brod for watching & God Bless Go lng sa xsr at enjoy the ride...ride safe
the one with the strainer is not a "db killer", it is a "spark arrestor". It prevents the hot exhaust particles from escaping and starting fires ...
Very useful video bro. Para to sa mga gusto magpa convert ng muffler nila pero ayaw msyado sa ingay ng single cylinder engines.
I needed a video like this, just got a hotbodies mgp slip on and its crazy loud so ill get a db killer, greetings from México city 🇲🇽
I bought the the short and the long one. Settled on the long for my xsr900. Just the right amount of reduction while preserving the beautiful sound of a triple.
Additional ideas.sss
= angle of resonator-assembly to top silencer (hot exhaust convection during starting-idling)
= other pipe go to bottom-silencer (different size, difference by 3x area)
Build triangle-oval shape with 3x-and-1x or 1x-and-3x tailpipe(endcan to tailpipe to face of tailgater). Can rotate triangle-oval for more efficient flow after tuning. Tune for starting-idling, cruising, peak torque (piston is digital, pulse of air is volume-area), peak flow is hp.
Insert surpressor for bass-note ground-shake and idling pitch for pedestrains
Flex-pipe with isolator-clamp to resonator to endcan (bass enhance vector, bass vibration transfer vector)...
It depends on what exhaust can youll be putting. There should be a sweet spot on which db killer is the best as per exhaust
Needed this video to properly install baffle on a new exhaust! Thanks brods!
Useful and interesting demo. It's worth the search for the right combination. Thank you.
nice one brad... although medyo 3 years late na, pero malaking tulong to pra saakin na ngaun lang magkakaroon ng xsr😅, thank you, nga pla may resonator ba yung elbpw na gamit mo?
Bro nice review... I think all db killers you showed performs well, it just depends on which exhaust you are putting it in. As I dont trust my ears anymore due to use and abuse, I would use a db sensor, no need to buy an app based will do aleast you'd know if there really is reduction in noise.
The "strainer" is actually a catalytic converter.
It's good for the environment and won't take away power
It's not a catalyst...it just looks like one.
The bike has a catalyst in the midpipe or collector...unless he removed it or has an aftermarket pipe...
Nope, its a resonator. Godbless
@@Justfun-gg8xi do you even know how a catalytic converter looks?
@@Rubberfoxy ofcourse that's why i said it's a resonator. Catalytic is on mid pipe and it has a lot of metal compounds not some strainers and super restrictive
Resonator and catalytic have huge difference
@@Justfun-gg8xi the honeycomb insert is still a catalytic converter. If you want to believe it or not
Salamat sa full demo ng mufflers at db killer types. Alam ko na dn kukunin kong silencer.
Thanks bro for watching God Bless
Hi Bro. Loving the channel and Yamaha XSR155 Videos.
With the 1st exhaust the 1st & 3rd silencer sounded the best.
With the 2nd exhaust the 2nd & 3rd silencer sounded great.
Difficult choice ;)
Yes brod hard to decide you can try using all db killers, nice to play with the exhaust & db killers thanks for watching & God Bless...
Brods, pashare naman ng link saan nabili yung MIVV at SC Project mo. Thank you! Nice review, keep it up. 🤟🏽
Ito yung hinahanap ko na video. Bibili na ko sa shopee nung may strainer para sa akrapovic ko 😁
Could you put the honeycomb db killer facing forward towards the headers and the long one facing into the muffler ?
For more silencing?
I think its possible bro
Yan Rin Ang gamit ko na DB killer sa Yamaha sniper 150 ko, Yung ika tatlo, Kasi pinalakas ya Lalo Yung BASS sa Akra M4 at naging super BASSY na sya👌
@@jeffbanguis4685 nice brother
Solid review! sobrang detailed. More videos and upload boss RS!
MIVV with strainer is the best for me Lods..thanks for ur review worth it..👍👍👍👍
what a useful video bro helped me out
Great video bro. Just wanted to ask, you dropped the db killer into the exhaust at 4:40 and just installed it. Did it sit straight inside the exhaust or did you have to adjust it? Cause mine just points to a side inside the exhaust.
@@washifwazeer1619 yes it goes straigth bro no adjuatments needed
@@ScramblerGorilla gotchu bro! Thanks
excellent comparison vid
Do you feel the performance difference when using respective silencer
If the bikes tuned without it, you will absolutely feel it if you put it in. It choked my mt10 out
Thats bs, proved its cut like 0.5hp no more than that@@DorDor400
@@SaparootYai you should probably do a bit more research. Or better yet, write two wheel dyno who did my MT10 and ask them about it. Not all bikes are the same.
Maganda yung low rumbling dun sa pinili bagong muffler at sa silencer with strainer. Yung unang maiksi parang may tunog lata. Ride safe, sir.
San dun?, pede pa mark ng time stamp?
Diba po masama lagi may silencer? Malakas ang carbon build up sa exhast valve nya dahil pigil yung buga palabas??
Di nman bro sakto lng
Dahil sa vlog na to mas na motivate ako mag karoon ng xsr🙂
Thank u bro & God Bless sau...
I have the long one and it's still too loud for me. I may try a different muffler?
Use longer muffler 420mm variants
@@Bass.Player yes i think so bro
Do you need a fuel controller thanks
Nope
@@ScramblerGorilla and engine all ok?
Yes bro no problem
@@ScramblerGorilla thanks for the update as I'm looking to swap out mine but thought u needed a fuel controller so replace the whole system and good to go?
Hello kuya giving some fun fact
Ung sinasabi niyo po na may strainer is catalytic converter
All stock exhaust ng mga big bikes like super bikes is merong catalytic converter one pf the purpose nun is to prevent the excess power to leak out
Parang ayun ung magpeprevent ng backfire ng isang exhaust lalo na kapag magpapalit ng elbow at after market exhaust
So kung sakin ang tatanongin
Best na ilagay ung catalytic converter sa may mismong elbow then pili kayo kung saan sa db killer ang gusto mo
Both long ang short is ok naman pero mas maganda ung long para sakin then ung catalytic converter ilagay mo sa mismong elbow para safe ung makina for backfires
Ayun lang po 👌😁
Hindi po catalytic yung "strainer" silencer. Honeycomb-design silencer sya ,iba itsura ng catalytic converter pino masyado ang butas 😊
thanks for putting in the work
Nice vid nakakuha ako ng idea kung ano bibilhin ko sa exhaust ko. Thanks brods
Thanks for watching Brod God Bless
nice video bro...kahit wala pa akong XSR...hahaha..😂
Life hack yung paggamit ng cable sa pagtanggal ng spring retainers. iwas gasgas and parang mas madali.
Thanks brod...
1st exhaust and 3rd silencer with strainer.
I dint undertand... What is better for less noise? I have a sc project.
I have sc project also, I think the 1st db killer really made a difference in the sound. I installed it also and it sounds better...
Bro what is the size your last db killer try to soundcheck for mivv canister.. because my xmax3oo I use also mivv canister ilike your last db killer wd strainer now I wanna know what is the exact size or the TIA BRO ride safe
50mm
Good day sir, nasubukan niyo po ba siya i-test with sound meter? pasok po ba siya sa bagong 99Db na limit?
Great video what is the dimension of this long db killer? It's diameter is 50.8mm x150mm?
Yes brod 50.8 thanks for watching & God Bless
What the meaning of 480 php 350 php as said in the video
Philippine Peso
Masyaallah... Terbaik bang
Hello Brother, good video! Question, so the "strainer db killer" lower the volume only by %20? Thank you.
Yes bro thanks for watching & God Bless
Sir alin yung pinaka mahina yung tunog?
Thanks...!!!
I'm looking for one of those. So...I would like to ear the second option of dbkiller...but... installed in the tube instead of exhaust. That mean the dB killer must be installed in other direction.
Thanks friend...!!!
From Spain... Regards.
Thanks for watching bro keep safe & God Bless
Thanks 😊
Which DB killer supresses th noise??
Almost same lng lahat brod
Yan ang gamit ko since 2yrs na
Nice bro
nice vid brods pasok kaya yan sa 115 decibels ng lto?
Have a good sir,
Nice video I have idea,
Pa request naman try mo with db killer sa exhaust sa unahan at sa dulo ,kung ma's medyo tahimik,
Thanks you,
Yea brod mas tahimik pag harap at likod
Sir patanong po anong bar end yan. Parang larger than usual yung mirror nya po kasi.
Stock ecu ka pa bro?
Yes bro all stock
Pasado na ba yan sa mga check point bro?
Ok nman sa chekpoint bro basta nka silencer
Boss ask ko lng yung tailights mo sa ginawa mo pang kabit?
Stock tail lights bro
great video, safe riding
U do a wonderful job
Boss alin Ang maganda s tatlong db killer
Hi sir. Bumili din ako ng SC project para sa XSR155 ko, ganyang ganyan din. Sabi po nung nagiinstall na nasasakal daw po yung engine pag nilagay ang DB killer. Advisable ba na hindi ilagay? More power sa page mo sir!
Di nman sir same nman ang performance brother pag walang db killer masyado maingay hehe
Ma's maganda ang pang at lo para sa akin u ng may strainer
Sir Naka remap ecu kaba or stack Hindi ba naapektuhan pag stack yung Ecu sir kahit na Naka exhaust wala bang back fire?
Wala nman smooth p rin
Tanong ko lang po, pasado ba yung lakas nang exhaust sa LTO ? Hindi po kaya mahuli?
boss kamusta sa checkpoint yang internal db killer?
Oks nman bro di nman nasita
@@ScramblerGorilla salamat bossing hehe. yung ibang mga “gutom” na nanghuhuli kasi pag nasa loob yung silencer sinasabi open pipe pa rin daw 😩
sarap basahan ng memo ng LTO eh
Magkano po yung ganong sc na exhaust? Compatible po kaya sa rusi 250 ko yan?
@@angelamozmendoza1869 pwwde yan brother, basta custom ang mid link pipe, more or less 1k plus mid link pipe
@@ScramblerGorilla salamat sa reply sir! Hanap ako ng mabibilhan
Sir ako nman R15 v3 gamit ko, naka akra m1 ako. Bassy sound sya di n ako nag silencer 👍 kc tahimik sya pag idle Lang 👍
Ganda ung pangalawa sir
Thanks for the review
hm yung mivv pipe and dB killer with strainer bossing. nice blog anyway. it helps to riders like me who have no time to do what you have showed in this blog. Ride safe bro!
2k to 3k brod price with db killer
sir baka may Link ka ulit nito
San mo nabili mivv sir
Why can I not find a English video
Thank you so much bro!
Brods pwede ba pagsabayin dalawa. Db killer at ung front silencer?
Pwede nman bro
Planning to buy Honda Cbr 150r, pwede po ba ito sa honda cbr kht 150cc lng at ganito rin sound kalalabasan? Salamat po sa sasagot.
Yea brod pwede yan sakto yan tha ks & God Bless
@@ScramblerGorilla salamat po.
bro gandang gabi san mo binili ang mivv? mivv titanium ba yan? salamat.. meron kc sa lazada ako nkita na ganyan. ok ba yun? tnx
Lazada avail brod
Great Vedio brother ❤️
Helpful review kudos!
Boss anong size nung #3 db killer mo n my strainer
51mm bro
Bro, ok lang ba yung muffler lang palitan ko, kasukat kaya siya sa mga sc project na cannister lang?
Yes basta brcket type bro
Bro, pa bulong naman kung san ka naka score ng MIVV exhaust mo thankyou🙏
Yes Bro sa online ko nabili Lazada bro
penge po link
Pls send msg at bikerbrods fb page thanks & God Bless
@@jefflawrencemendoza6647 penge link lods
Sir Cat delete yan no? Wala bayan reso?
Brods 51mm po yung muffler mo at 50.8mm yung silencer na binili mo or 51mm din naka lagay sa shopee??? Sana masagot Po. Salamat Brods. Ride Safe.
Yes bro tama un size 51mm
DB killer with strainer for me
Nice review sir! Hindi ba nkakasama s engine mag palit ng muffler pero nka stock ecu lng? Or dpat palitan din ang ecu?
Di nman brod oks lng
gud day sir, paano ako mg mag order ng full exhaust system. mt15 yung unit ko. thanks
Marami n mga aftermarket sir online madali nman mahanap maarketplace bro madami n yan
sana balang araw magka xsr din ako porma pa sa sniper na bago ata yan
Go lng brod kayang kaya mo yan thanks for watching & God Bless
Im lookin to quiet my xr650l. I ride in spots that I dont wanna draw attention haha.
Yung mivv muffler pwede po yan sa 155 sniper? Saaan nmn pwede omorder sir?
wala bang effect yan sa engine lalo na sa mga may karga na mio?
Wala nman bro
alin dyan boss pasado sa LTO?
Pwede nman brother di nman nasita
Quality work ❤️
Saan po pinagawa ung silencer mu boss wala po bang huli yan boss
Dip nman nahuli bro sakto lng un sound
brods w8 ko rply mo kung sa yung mivv mo at dun sa lazada ay iisa? balak ko ikabit sa dominar ug ko kc. st magkano yan bili mo? salamat
Yes bro same lng un sa lazada 2.8k bro
Bro pano mo natanggal yung nasa loob ng old bar end mirror mo? Same kasi tayo ng bar end mirror yung maliit na bilog gusto ko na sana mag palit sana masagot mo ko lods haha
Di na natangal bro
Wala ng resonator sir? DB killer nalang?
Yes brod tama…thanks for watching & God Bless
Boss san ka nakabili ng ganyang pipe miv?tapos dv killer?
Shopee or lazada bro available
hm po yung mivv.?
2,8k it a copy only
tks so much!!!
Sir hm yang mivv na pipe?
Copy lng sya brod 2k plus
@@ScramblerGorilla tnx po sir
Sir ala na need gawin sa ecu? Pag nag sc project
Wla nman brod pero depende p rin sau kung gusto mag remap oks din brod