2021 2022 2023 2024 KTM 1290 Super Adventure Akrapovic dB killer removal A GUIDE WITH SOUND CHECK
Вставка
- Опубліковано 15 чер 2021
- More 2021 2022 1290 SAS video on my channel.
Due to feedback SOUND TEST NOW ADDED to this guide. 19M 30SEC
USE GOOD SPEAKERS TO HEAR SOUND CHECK LIKE TV SOUNDBAR. NOT PHONE - OR IT WONT SOUND AS IT SHOULD.
5mm drill bit size for the rivets x2
Genuine Akrapovic Blind Rivet Stainless Steel P-BR1 Re-Sleeve Repair x 12 KTM
Grinder to remove spot welds on bolts of db killer
Genuine Akrapovic Exhaust Rubber Grommet Hole Cover Plug P-GUV004 13mm KTM
Channel Link to Other Videos.
/ @ricardoyeep
Or you could just buy the WINGS muffler and the DB just comes out with a screw.😂. And the sound is absolutely fantastic. Cheers
I don't undestand how your exhaust sound that nice even with the db killer... I just got mine and I found the sound is almost the same as with the oem one and for the price its make me sick a little
greetings from Los angles this video was informative as it was entertaining, I plan on getting a 2024 SAR soon so this video is top notch, cheers
Hi Ricardo, I’m Andre from Porto, Portugal! And I really enjoy to watch your videos. Last week I saw your video removing the db killer of the 1290 and I decided to do the same to mine. I came to the point of removing the carbon part but it seems that it is stuck. Any suggestions?
You are great, best video , i Hope to find courage change original Exaust with ackrapovic, regards Lorenzo
Bella presentazione bravo
Great video, great info. Thanks
Any tips on getting the carbon cap off? Having a ton of trouble
Great video by the way . 1 question did the can at the rivet points not have a strap that goes round the can ???
Your as sore on black gloves as me 🤣🤣🤣
Thanks for your video! Do you feell it is necessary to do anything with the fueling to this setup with removed db killer or does or run properly?
Too much work for a sound increase that hurts the environment .
Whining sound
When you had the bike dyno done, did you upgrade air filter ? To a K&N
Hi my friend :) did drill holes in carbon-cap, but i was not as happy about where the holes where, so the holes where just to big for the rubber-cap from Akrapovic, drilled out ordered new end-cap, hard to find online, but with rubber-caps, 2, new pops, 12 and this new carbon-endcap, with alreaady holes in perfect place :) all in all happy, got same bike as you, only in black and 2022, same bike :) Thanks alot for tip on this.
Can't you just drill the carbon cap and un bolt?
Hi Ric! Thanks for making the beautiful videos. They are very helpful. I just tried to remove my db-killer from my akrapovic which is 30000 km on it. One is out but the other is realy stuck.:-( I'm going to remove all rivets soon. So thanks again for the tutorial.
Hey hey
Hi, nice video.
Another fantastic video! I’ve done some homemade exhaust work in the past. You are a surgeon compared to my caveman holding a hammer:). Thanks again for a useful, thorough, and well made video.