Hi, I like very much your explanation, but I would like to know which head should I use when making granulation. Can you give me any help on that ? thank you so much !
Hey Fatima! I'm sorry for the late reply on this - If you still need help you can reach out to our customer support team anytime via Live Chat on our website ottofrei.com or give us a call between 9am and 5pm PCT for help (800) 772-3456. They may need a bit more information on the pieces you are making to help you pick the right tip for your project!
I have been using my smith little acetylene and i needed more torch for larger pieces and casting. I just set up my torch and I’m excited to try it. I appreciate this video very much as it will help me in choosing the correct tip for different jobs. I would still like to get more information on setting the psi on both O2 and propane gauges. Where can i find this information?
I assume you’ve found what you need by now, but this information is available through and copied from various online vendors who sell this torch. I did not copy the fuel/ air settings because I have not been interested in that setup. Recommended OXYGEN & propane outputs per attachment Hoke Style & Micro Head (MH Tip sizes are 0.9mm, 1.2mm, and 1.6mm.) 3 - 7.25 PSI Oxygen: (0.5 to 0.2 Bar) 3.6 PSI Propane: (0.248 Bar) Recommended regulator output pressure settings : Casting head (Oxy/ gas): 43.5 PSI Oxygen (3 Bar) 22 PSI Propane (1.5 Bar) Platinum Head: 21 PSI Oxygen (1.5 Bar) 7 PSI Propane (.5 Bar)
I LOVE mine-good demo Jack-did not know about the pressure markings!
thank you, Jack!!! but could you show us how to install the torch on the propoane?
This is super helpful, Jack; thanks!
Hi, I like very much your explanation, but I would like to know which head should I use when making granulation. Can you give me any help on that ? thank you so much !
Hey Fatima! I'm sorry for the late reply on this - If you still need help you can reach out to our customer support team anytime via Live Chat on our website ottofrei.com or give us a call between 9am and 5pm PCT for help (800) 772-3456. They may need a bit more information on the pieces you are making to help you pick the right tip for your project!
I have been using my smith little acetylene and i needed more torch for larger pieces and casting. I just set up my torch and I’m excited to try it. I appreciate this video very much as it will help me in choosing the correct tip for different jobs. I would still like to get more information on setting the psi on both O2 and propane gauges. Where can i find this information?
I assume you’ve found what you need by now, but this information is available through and copied from various online vendors who sell this torch. I did not copy the fuel/ air settings because I have not been interested in that setup.
Recommended OXYGEN & propane outputs per attachment
Hoke Style & Micro Head (MH Tip sizes are 0.9mm, 1.2mm, and 1.6mm.)
3 - 7.25 PSI Oxygen: (0.5 to 0.2 Bar)
3.6 PSI Propane: (0.248 Bar)
Recommended regulator output pressure settings :
Casting head (Oxy/ gas):
43.5 PSI Oxygen (3 Bar)
22 PSI Propane (1.5 Bar)
Platinum Head:
21 PSI Oxygen (1.5 Bar)
7 PSI Propane (.5 Bar)
Looks good for glass, too.
Can you cast platinum with the long melting head?? And can you solder platinum with the standar hoke??
Anyone know how much platinum the Swiss Torch can melt in one go?
No HHO gas ?
Seems like theirs no feedback 😪 im so disappointed Jack, theirs just 12 comments come on dude' help us a little bit
Thaught he knew