Excellent video. Took me 15 minutes from start to finish. Even though I have the Beko DHR73431W this video was close enough. In this model, the capacitor screws into a plastic thread which is then tightened with a screw. Many thanks and keep up the good work.
Hi, So did you replace the capacitor and still didn’t spin? Then loose the belt and check if something stucked between the drum and the rail where drum’s edge is running.
This was great. Exactly what I needed. Ordered a replacement from eBay and it now works again! However, it has alot of vibration now. Could it be wrong rating or something? 🤔
@@georgesworkshop8600 Thanks for getting back. I took the old one out first. It said 10uF so I ordered the same one. However new one only had 2 terminals on the top as opposed to 4 on the original one. It could be an electrical vibration. Not sure 😕 is there a way to confirm 🙈
I have the same issue with my dryer but i cant locate the capacitor any idea where it might be on my machine its a BEKO DTKCE80021W ive located the motor etc but no capacitor :*
Hi Tracy, Same like in this video, if you face the front of your dryer, please remove the right hand side panel. If you couldn’t locate by the engine, have a look on the top frame. Approx in one line with engine. Under a metal cover, one screw will hold it, that need to be removed. You should find here. At newer models capacitor located here. Good luck!
I’ve got this exact same problem so I’ve ordered a new capacitor. Is there any danger of the old one retaining electricity when I replace it, I don’t want to get a shock! Thanks in advance 😊
Update: I’m pleased with myself. With your tutorial I fixed this with no troubles! Took longer taking the sides and top off than it did to replace then capacitor!! Cost -£10- bargain! Thanks so Much 😊
Hi George I have this problem on the dcu 8230, I'm struggling to get the side panel off. I've unscrewed but there's still resistance stopping me from removing. Have I missed something? Thank you!
Excellent video. Took me 15 minutes from start to finish. Even though I have the Beko DHR73431W this video was close enough. In this model, the capacitor screws into a plastic thread which is then tightened with a screw. Many thanks and keep up the good work.
Excellent work! Thank you!
Thanks for fixing my beko 🤩
Thanks Jim! 👍
Our beko had the same problem. Brilliant video. Very simple explaining. My tumblers now fixed. Thanks for the vid👍
Thanks Norman, good to hear that instructions could be followed.
Was it easy to do? And were did you buy the part from?
@@divinesalon339the part was from an electrical supplies shop but loads on ebay, even amazon. Not expensive either. Good luck.
Oh thank god! Someone with the same model as me. Been trying to figure out how to access the motor for days 🤣 thank you
I hope you were fixed it.
Perfect video. Saved me a repair cost. Had exactly the same problem. Thanks a lot.
Thank you for your feedback!!!
Thank you this saved me a new tumble dryer!
Hi Katie,
Good to hear that you could find useful my video
Thank you very much for your advice to fix to fix beko dryer ordered the part fitted it working like new thankyou
Good job Mick! Proud of you!
Thank you! 😊
You're welcome 😊
Thanks. Same issue solved 👌🏿
Well done! 👍
€4.22 and fixed. Thank you!
That’s great!
Hey mines doing this only has it over 1 year. It's a beko simular to this would. It be the same to fix? Got a quote to fix it it's Expensive
Just tried this on mine it's making dame noise as the one here but my won't spin do you know what it could be?
Hi,
So did you replace the capacitor and still didn’t spin? Then loose the belt and check if something stucked between the drum and the rail where drum’s edge is running.
This was great. Exactly what I needed. Ordered a replacement from eBay and it now works again! However, it has alot of vibration now. Could it be wrong rating or something? 🤔
Hi,
Is it a mechanical or electrical vibration? The whole machine or just the capacitor? Did you replace with a same capacity (microfarads) capacitor?
@@georgesworkshop8600 Thanks for getting back. I took the old one out first. It said 10uF so I ordered the same one. However new one only had 2 terminals on the top as opposed to 4 on the original one.
It could be an electrical vibration. Not sure 😕 is there a way to confirm 🙈
does it matter what way you reconnect the capacitor ?
Hi Wayne, it doesn’t matter which way, but one side one pole.
I have the same issue with my dryer but i cant locate the capacitor any idea where it might be on my machine its a BEKO DTKCE80021W ive located the motor etc but no capacitor :*
Hi Tracy,
Same like in this video, if you face the front of your dryer, please remove the right hand side panel. If you couldn’t locate by the engine, have a look on the top frame. Approx in one line with engine. Under a metal cover, one screw will hold it, that need to be removed. You should find here. At newer models capacitor located here. Good luck!
Do you have any tips if the replacement doesn’t resolve the issue ?
Hi Charlie,
If you put a brand new capacitor, that should solve the problem. If didn’t, there is an electrical issue.
I’ve got this exact same problem so I’ve ordered a new capacitor.
Is there any danger of the old one retaining electricity when I replace it, I don’t want to get a shock!
Thanks in advance 😊
Hi,
If you unplug before start to replace the capacitor, there is no danger. So please UNPLUG! This is a must to do before any repair. Good luck!
Update: I’m pleased with myself. With your tutorial I fixed this with no troubles! Took longer taking the sides and top off than it did to replace then capacitor!!
Cost -£10- bargain!
Thanks so Much 😊
Hi George I have this problem on the dcu 8230, I'm struggling to get the side panel off. I've unscrewed but there's still resistance stopping me from removing. Have I missed something? Thank you!
Hi Bernie,
Sorry for the late response.Have you removed the screw from the bottom? I mean you must bend your machine to make accessible
Can i do this to my robinhood dryer?
Yes, you can do it 😉
Can I use 10 UF to replace the 8.5 UF ???
We do not have 8.5 UF in our region
Hi,
+/- 5% different still Ok! So 10 UF a bit too much…
@@georgesworkshop8600 Thanks for the reply 🙏
You’re welcome
Where can I buy the replacement capacitor from here in the UK?
Hi, you can buy from Ebay
Wau super 👏👏👏👏🙏❤🙏❤🙏❤👏👏👏👏👍
Thank you