Dude, thanks so much for posting this. Saved the day when I was about to pull boat out at a ramp several miles away. Was about to get SeaTow involved. Saved me the embarrassment too, lol.
You missed one…make sure you’re in neutral. Many modern outboards will not let you start the engine while in gear (unless you use the emergency manual start at the flywheel).
My newly purchased 2000 Mercury 40 started up but then stalled 5 minutes later. Now, although the electric start turns the motor over, it won't start. Fuel, fuel line, bulb pressure and fuel filter are fine. What do I check next???
I had an odd one with my engine not starting. it even was not getting power. I was stumped. then I took apart the gearshift and found my neutral safety switch was broken.
I have a problem on a suzuki df 90 A 2009.. I have no spark and the trim does not work, and when it is connected directly to the wires, then the trim works.. is it the ECM? when starting I have a long beeeep pause of 5 seconds and then a beeeep for about 3 seconds and so on..thank you
my boat was running fine then one day it just started dragging and would not turn fast enough to start my battery is fully charged I also had to replace the ignition switch and really sure that the wiring was correct as the motor was dragging before I added the switch thanks for any ideas that could help get me back to running
I have a 2006 mercury 4 stroke 60 hp and im trying to check the fuel system . is there a tool i can get at a reasonal price to check the vaper separator assembly and how do i do it . i also found an in line fuel filter hidden in a black sleeve .do you think this should be changed , my problum is driving around for a cuppal of minits my rpms drop to 3 grand .
John, I have a 1994 Tracker Magna 17 with 75 Mercury Pro Series. I hear the clicking sound at the engine however no cranking. Based on your video I am thinking it’s the solenoid. How can I narrow it down to ensure I am buying the correct part and not wasting time and or money?
Hey John, I am hoping you can help, I have a 1998 yamaha 40hp 2 stroke, when I bought the boat it cranked and ran perfect but needed a water pump, I changed that and then when I tried to crank it I lost all power to switch and trim, I used a jumper wire to get motor down, a week later I tried to crank and while trying to crank lost power again, I wiggled the wires to switch and got power back, then it would crank and stall after a few seconds, I put new plugs and primor bulb on still the same, next day I drained and cleaned gas tank put fresh gas in and drained carb bowls, now it won't crank at all, can you help me.
Switched boat motors 25 and a 60 now the 60 runs fine but the 25 isn’t getting power but will turn over if I jump the solenoid , won’t do anything with the key and won’t tilt ,
Hey, love your video. I have an old Johnson motor I think from the 60's. I got it out to the water and she was turning over wanting to start. After a few tries. It stopped turning and just died down to almost nothing. Brought it home and realized I never plugged the gas line to the engine. My little 2 and a half yr old son distracted me. The battery is new and around 12.5 fully charged. I'm getting a 1 click when trying to start it. I don't know much about boat engines at all. I'm assuming it's the solenoid or fuse. Didn't get that far too check yet. The boat place I go to, is very busy and they may keep my boat for half the summer. Wondering If I can fix it myself. If it's the solenoid, can I fix it myself?
if you only get a click most likely the starter solenoid nor I would actually check the starter if the solenoid checks out ok. it also be a weak battery check this first
My newly purchased 2000 Mercury 40 started up but then stalled 5 minutes later. Now, although the electric start turns the motor over, it won't start. Fuel, fuel line, bulb pressure and fuel filter are fine. What do I check next???
Any thoughts when you have a new battery, but motor does nothing. No clicking, just nothing. Yamaha Zmax 225 (2003) and was running fine. Had to get towed in.
I have a 2009 EFI Mercury 4-stroke 30 Hp. It clicks when I turn on my key to start. I charged my battery, checked to make sure it was in neutral connections are okay. So where's the solenoid located ?
Just bought 2019 Mako pro skiff it start with previous owner but took it out and it died on me. So replaced new gas and check the gas line have gas when prom the bub still won’t start any ideas would appreciated. Motor is 2018 mercury 60hp low mile under 30hr.
I HAVE A MERCURY /2005 /2 STROKE OUTBOARD MOTOR WANT START IF ITS MY BATTERY SHOUD I BE ABLE TO JUMP START IT . I HAVE NEW STARTER / SOLINOID STILL NOTHONG
I have a puller start outboard motor and I wont to fit a electric starter I cant find the right motor ( SERIAL NUMBER 0N045091 ) MERCURY MARINE ( 2005 ME30 EMLH ) ( 30 ) IF YOU CAN HELP ME FIND ONE PLEAS JOSEPH
life savior . first time bought a boat and i had the killer switch taken off and had no clue why it wont start. thank you so much for this video
Dude, thanks so much for posting this. Saved the day when I was about to pull boat out at a ramp several miles away. Was about to get SeaTow involved. Saved me the embarrassment too, lol.
I can't tell you how many times the kill switch gets me. Thats not my issue, but I do have somethings to check from this KISS method, thank you.
Of course! The kill switch! Not sure how it came loose but I must have pulled it somehow. Thank you! Now I can tackle other projects today!
Thank you! I can't believe I forgot my kill switch...the obvious. Great video.
Yep mine got bumped!
You missed one…make sure you’re in neutral. Many modern outboards will not let you start the engine while in gear (unless you use the emergency manual start at the flywheel).
this is literally what happened to me and i was stuck for a solid hour and a half lol kinda embarrassing
My newly purchased 2000 Mercury 40 started up but then stalled 5 minutes later. Now, although the electric start turns the motor over, it won't start. Fuel, fuel line, bulb pressure and fuel filter are fine. What do I check next???
😊😊
@@ritparent7239 Did you resolve this? If so what was the issue please?
Where should i check to see why i am not getting power when i turn the key on but am getting power from the battery switch
Great advise. Kill switch again. Kids Play in my boat all of the time and I guess that's their key.
I had an odd one with my engine not starting. it even was not getting power. I was stumped. then I took apart the gearshift and found my neutral safety switch was broken.
1997 15hp Evinrude
Got spark and fuel but won't fire.
By the way, mice got into the carburetor but we cleaned that up.
I have a problem on a suzuki df 90 A 2009.. I have no spark and the trim does not work, and when it is connected directly to the wires, then the trim works.. is it the ECM? when starting I have a long beeeep pause of 5 seconds and then a beeeep for about 3 seconds and so on..thank you
my boat was running fine then one day it just started dragging and would not turn fast enough to start my battery is fully charged I also had to replace the ignition switch and really sure that the wiring was correct as the motor was dragging before I added the switch thanks for any ideas that could help get me back to running
Thank you the first 10 seconds solved my problem haha
thank you for the tip 1 kill switch You Rock
I have a 2006 mercury 4 stroke 60 hp and im trying to check the fuel system . is there a tool i can get at a reasonal price to check the vaper separator assembly and how do i do it . i also found an in line fuel filter hidden in a black sleeve .do you think this should be changed , my problum is driving around for a cuppal of minits my rpms drop to 3 grand .
John, I have a 1994 Tracker Magna 17 with 75 Mercury Pro Series. I hear the clicking sound at the engine however no cranking. Based on your video I am thinking it’s the solenoid. How can I narrow it down to ensure I am buying the correct part and not wasting time and or money?
Same prob how'd you go about man
@@Yatchlifemombasakenya Jump out the two big wires on the solenoid Warning you will get a big spark
Hey John, I am hoping you can help, I have a 1998 yamaha 40hp 2 stroke, when I bought the boat it cranked and ran perfect but needed a water pump, I changed that and then when I tried to crank it I lost all power to switch and trim, I used a jumper wire to get motor down, a week later I tried to crank and while trying to crank lost power again, I wiggled the wires to switch and got power back, then it would crank and stall after a few seconds, I put new plugs and primor bulb on still the same, next day I drained and cleaned gas tank put fresh gas in and drained carb bowls, now it won't crank at all, can you help me.
How do you test cdi switch box 332-7778 for 3 cylinders or 6 cylinders?
Hi I have a Old 650 Mercury thunderbolt and it only starts if it's tilted forward if it's straight up and down it won't start do you have any answers
I would say the carburator float needs Cleaning adjusting
Thanks my brother. Very helpful
HI,i have this problem,no longer "beeps" when the ignition switch is turned on and motor no start.
Finally, professional help.
Don't forget to check the Neutral safety switch
I have a 90hp honda that won't start been sitting for two years replaced the battery and ignition switch and starter and perks switch
Sir still our life boat engine is not starting....we followed all the directions u gave in video.... Please please please help.....
Switched boat motors 25 and a 60 now the 60 runs fine but the 25 isn’t getting power but will turn over if I jump the solenoid , won’t do anything with the key and won’t tilt ,
On 9.9 hp Yamaha boat engine I changed cdi unit and coils and spark plugs no sparks still. Voltage on the wires. What can be???
Thanks for the video
Tengo problemas con mi barco es un trofeo no arranca con llave pero directo no hay chispa para arrancarlo 😢
Hey, love your video. I have an old Johnson motor I think from the 60's. I got it out to the water and she was turning over wanting to start. After a few tries. It stopped turning and just died down to almost nothing. Brought it home and realized I never plugged the gas line to the engine. My little 2 and a half yr old son distracted me. The battery is new and around 12.5 fully charged. I'm getting a 1 click when trying to start it. I don't know much about boat engines at all. I'm assuming it's the solenoid or fuse. Didn't get that far too check yet. The boat place I go to, is very busy and they may keep my boat for half the summer. Wondering If I can fix it myself. If it's the solenoid, can I fix it myself?
if you only get a click most likely the starter solenoid nor I would actually check the starter if the solenoid checks out ok. it also be a weak battery check this first
My newly purchased 2000 Mercury 40 started up but then stalled 5 minutes later. Now, although the electric start turns the motor over, it won't start. Fuel, fuel line, bulb pressure and fuel filter are fine. What do I check next???
Any thoughts when you have a new battery, but motor does nothing. No clicking, just nothing. Yamaha Zmax 225 (2003) and was running fine. Had to get towed in.
does an older 91 Johnson V4 90 have that internal fuse???
I have a 2009 EFI Mercury 4-stroke 30 Hp. It clicks when I turn on my key to start. I charged my battery, checked to make sure it was in neutral connections are okay. So where's the solenoid located ?
Just bought 2019 Mako pro skiff it start with previous owner but took it out and it died on me. So replaced new gas and check the gas line have gas when prom the bub still won’t start any ideas would appreciated. Motor is 2018 mercury 60hp low mile under 30hr.
On my outboard won't start up but have power and motor trim have power but it wouldn't move up or down
GREAT VIDEO!
you guys are great thanks for the help.
I HAVE A MERCURY /2005 /2 STROKE OUTBOARD MOTOR WANT START IF ITS MY BATTERY SHOUD I BE ABLE TO JUMP START IT . I HAVE NEW STARTER / SOLINOID STILL NOTHONG
Thank you. It was the kill switch
Thanks!
My coil both coils good but bottom coil plug not working
Top coil plug working I cannot figure it out Yamaha 115 6ek
The first thing you sad fix my issue thanks
Suzuki 115. Have power from battery, engine not turning on
Hello I need to now how can find your contact
What about selling parts to Europe,specially spain. Is it possible?
How to contact you
Good video, the shelf behind you is not level.
You guys sell outboard parts but not a complete outboard?
I have a 115 Mercury I don't even know set for 3 years
No compression or spark test
Starting find when mother is warmed up just having problems with cold starts
sounds like choke issue
What size wire for a 115 evinrude 1978?
what is the problem when it turns over good but backfires and wont start
I just had this issue I had my cdi wires swapped but now I got spark but it still won’t fore
Hi i
👍 great
complicated
Nah this is useless gruesome and toothsome
I have a puller start outboard motor and I wont to fit a electric starter I cant find the right motor ( SERIAL NUMBER 0N045091 ) MERCURY MARINE ( 2005 ME30 EMLH ) ( 30 ) IF YOU CAN HELP ME FIND ONE PLEAS JOSEPH