BIG PROBLEM HERE!! SUPER EDUCATIONAL - DIESEL INJECTOR PREMATURE FAILURE!!!

WE HAVE MORE INJECTORS THAN EVER BEFORE
THIS Toyota Prado 2013 MY 14 update 130 thousand kilometers has problems AND NEEDS NEW INJECTORS ASAP URGENT
Fourby4diesel 
Premature injector failure
Load
Injection volume
Main injection period
Injector problems here
Noisy engine
Clattery diesel
Toyota denso 1kd-ftv

[@barrenoasisgroup]

There's are other diagnostic vides readings for floged injectors showing raised readings for all 4 individual injector feedback val between 1.5 to 3.8 also raised calculated load, injector volume & main injection period. Then you have this vehicle with also floged injectors with all the stated readings above showing lower why is there this difference for the same fault.
Apologies if you have already explained this previously👍

[@stewatparkpark2933]

Gunk was probably acting as a sound insulator . Now noisier after gunk removed .

[@guri131]

That is a horrendous cold start. My 2KD is almost petrol like silent on dead cold start

[@colinvandenhoff6343]

I wonder if the no 4 injection value changed because you jiggled the wires on top of the injectors.....went from 4 at the start to 0......🤔

[@scottgrove9821]

What ended up being the issue? Would be great to have a follow up on this one. Cheers for the

[@Fourby4Diesel]

Just watch the injector playlist you know it’s Injectors

[@Justinvz123]

What should the load and inj volume be on a 2013 Hilux? Point me to the right video Pleeease?

[@mortenhaugan851]

Hey Anthony, I have Prado 2007, I have seen many of your videos, like to follow your recommondations about my spesific car, it has 218 000km.
it was said to have new injectors, that have been confirmed by a orginal Toyota dealer, but I suspect aftermarkedinjectors have been put in, I have
only put 10 000km on the car since purchase. When I start it up (cold 0 degree) it has a funny sound until it reach working temperature, then it
sounds ok. oil&filter is ok. I want to ask you about scan tool, do you have some recommondations ? price up to dollar 500.
By reading out the injector codes I would probably tell if the injector are good. Best regards from Morten, Norway.

[@Nico-vt4il]

Hey Anthony, is there a decent scan tool I can buy for up to $500.00 that will read the readings shown here?
Thanks,
Nic

[@zaccuskelly4016]

Nah mate 2k minimum plus subscriptions

[@Nico-vt4il]

@@zaccuskelly4016 Cheers mate

[@anonymity6876]

👍🤘😎🇦🇺🍻🎅