I purchased one last night after watching this video, I added a 4 year warranty the total came to $799.48 with tax.. I hope it arrives by the expected delivery date🤞🏾
If you did it through Walmart, the delivery was about 1 week. Happy this video helped you out. I am sure I will be doing follow up videos as we enter the second season with this motor. Be sure to SUBSCRIBE and check it out! And all the best with your new purchase too. **SK**
I bought this motor last Saturday and im 7 hours into the break in period. Ill probably finish breaking it in on Saturday. So far, a very solid engine. Great trolling motor for fishing.
@leoscomputerandguitarrevie978 yeah I was impressed in the quality and ease of use for a cheaper model. I put it through it's paces on a huge lake like Champlain and it still held its own. Thanks for sharing. Be sure to Subscribe!
@@SKLIFEstyleThank you for your reply. I have 12 hours into my motor now and it is just fantastic. The vibrations were aggressive starting out but it has calmed down quite a bit, especially at half throttle. I did take the prop off and greased the shaft, and also greased the throttle cable to help with longevity on those parts. Probably got 3 to 4 weeks of good fishing weather here in Michigan then I'll need to put the motor in storage for the winter. I'll be excited to put some hours on it next year. Probably thinking I should order some impeller kits so I have them, although it does come with one to use after 100 hours of use. Hopefully yours is still running strong. I subscribed!!!
Everyone is focused on how fast these motors run. The most important thing to me would be how easy it starts and how dependable the motor is. Being stranded on the waterr is serious stuff
Yeah, speed isn't isn't strongest suit. But even still, it wasn't that bad. But like you said I was happy with its ability for it to start. I was never left stranded.
I can see that, hull design can def. come into play. I have a hydrofoil for ours I never put on...maybe I will give it a shot this season on vacation. Thanks for checking out and commenting on the video. Be sure to Subscribe to catch the latest! **SK**
I plan to use the tank on top of my new 6hp Suzuki as a reserve. I’m gonna keep it full as a back-up plan in case I screw up and the remote tank runs out unexpectedly. Since it’s only 6hp I probably won’t ever be so far away that the top tank won’t get me back in a pinch
Yeah not a bad idea. More fuel on board the better. I felt like the top tank was enough for about 45 to 1 hr of running. So yea def. A good reserve amount to get ya back safe. Thanks for watching and commenting. Be sure to SUBSCRIBE!
your suzuki if its a 4 stroke takes about 1/4 gallon/hr at half throttle. 1/2 gallon at full or a little more. so it might be a while before you run out
@@ct1762 I now have a 3 gallon marine tank setup to compliment the tiny tank on the motor, so I feel like I'm good for anything. Better safe than sorry.
Thanks for showing it hooked up to a external tank! I was worried about this part because the tank on the motor has be small and I couldn't imagine it holding much. Id hate to try filling it up while on the water....probably end up dumping it in the water while filling it. I wonder if the 3.6 has the same feature, I know it won't do much, but I can pick up one for 150 and it would be good on my 2nd boat and I could test it out. Think this 6hp would push a 14ft aluminum vhaul jon boat with 2 people ok? Long as I can get like 7 mph id be happy.
after a tank of internal fuel the rings are more seated than they will ever be. heat cycle for an hour and thats it. 8 hrs break in is just insurance for the factory. if it doesnt start after 2 pulls give it a little gas. i see you kinda figured that out after yanking on the poor thing. the way to increase the life of the pullstart recoil spring is to pull the cord out until you feel resistance/compression then pull. you should see these guys ripping these when there is no resistance!
Yeah, I had a bit harder time starting up do to having just transporting it for a long distance. But any other time a couple pulls and it would always fire right up. Actually a pretty solid motor, and hard to see paying twice the price for the real mercury, especially when talking about such low horsepower. A big boat and such then yeah I would go for the reliability factory but for this application I think the cost savings is worth it.
Hi i had bought same as yours 5 months ago i used it in 14feet SIB boat, few weeks ago the engine failed when i was on the middle of the sea and it never started since so i paddled for nearly 4hours to go back to the shore. And i found out the CDI burnt. Better get a reputable brand before it happen to you same thing to me. Now im waiting now my new suzuki 20hp to be delivered.
Really sorry to hear that happened. It isn't main transportation so idk if we will upgrade soon..but I will be sure to give it a more thorough look through before use. And be sure I will post a video if it does blow 🤞.**SK**
I had all the start up procedure done including break in. I would suggest do not full throttle more than 45seconds it has not fitted with voltage regulator, thats why it burnt CDI
Yeah ok video for the hangkai 6 horses. A good work through on the running in process . Did you fill the gearbox with oil if so which oil ? What ratio two stroke oil did you use ? Reply edited for spelling mistakes
It was 25 to 1 oil to gas and after 8 hrs you can move on to 50 to 1. As for the gearbox oil, I used Star Brite Pro Star Premium 90w Hypoid lower gear unit oil.**SK**
@@jonathancordero6239 ty i was looking at those after a few comments here im going to go with the smaller mercury .. reliablity vs price i think is the best tbh
I'm up here on lake Champlain as well. Have you uses this motor any more? Looking at this for my 14' river boat. Also whats the measurement from the top of the transom mount to the planer board above the prop? Thanks.
That's awesome. I don't have the motor any longer, I actually sold the boat earlier this year since it wasn't going to get much use for the second year in a row. But this was a short shaft so I feel like it was about 18 inch. They have two versions I believe but the short shaft worked great for this application.
@@SKLIFEstyle Thanks for your reply Em no that's great i need a sort shaft for the American sundolifn 12 here in Ireland ,great stuff thank u is it definitely a good moter?
@Cavanpikefishing I thought it was. Ran well, decent powe, easy to operate, and pretty much a mercury clone, so if you did need want parts, it should be simple to find. Hard to justify over a grand or more for such little HP. Worked well with the external tank too.
I had one this outboard on a 20' open skiff. It worked well. You should check all the nuts and screws to make sure they are tight. Its a good engine for the money. Not so sure about SK Lifestyle.
How fast did that go on your skiff? I got a 17' 05 Glastron Mx 175. I have had problems twice stuck on the water, and was wanting to get one of these as a back up. I was thinking of getting the 9hp one they sell. The total weight of the boat with a full tank is about 2,400 lbs, so lets say 3,000 with a few people on it... Could you estimate how fast that would go as well?? (First time throttle cable was loose, second time starter bolts broke) Unexpected things keep happening so thats why I want to put one of these as a backup...
I do not but I can add it to my list of upcoming videos to make. I don't have plans to run the engine until vaca in a month but I am sure I can run it in a bucket for the demo, and will check that off the list and ensure it's okay for vaca too. Be sure to Subscribe to catch its release. **SK**
How is this your brake in of the motor video when you say just after 8 mins that you were out on it for hours the day before and it was good on gas? I'm confused
It took I believe 8 hrs to break in the motor. I did it over a 2 day period. I was driving it the day prior at the speed specified and could tell it wasn't using that much fuel over hours and many miles driven.
Hey, I actually have a video on putting the boat together and a few others, be sure to Subscribe and check them out on my channel! You can find them in my boat life playlists as well. But the boat is about 110 lbs before any equipment. Thanks for watching!
Hey Shannon, I put the link to the hose I got from Amazon below. It was universal from Attwood for Mercury's. Thabks for watching be sure to Subscribe! **SK** Attwood 93806MUS7 Marine Boat... www.amazon.com/dp/B006MIXHSQ?ref=ppx_pop_mob_ap_share
Usually a motor will come with a COO (Certificate of Origin from the manufacturer) which you then take to your local Dept of Natural Resources and after taxes and such are paid, they will issue a Title from the state you live in.
Very true. Well we will put it to the test for season 2. And be sure I will post on it. We are looking to buy a full size fiberglass boat this season but we will still bring this out too. May even slap the hydrofoil on it too. **SK**
To expand further I have the external tank to cut down on having to stop and refuel on the water. More prone to spilling with the internal tank needing refueling every hour and cuts out any concern that you are running low. It's enough to drive multiple days for long trips and it's just a plug in, nothing complicated.
@killzilla I sold it this summer, but it still ran excellent, fired right up, and no issues/concerns. Person I sold it too planned to use it often with the family. I think it is worth getting versus another model for 4x the price. Mixing gas isn't the most fun, but they may have a 4 stroke, if they do and it's a few bucks more that may be worth the spend to save the hassle. But otherwise I was pleasantly surprised. Thanks for watching. Be sure to Subscribe!
@killzilla thanks. Highly recommend an external tank, otherwise you will only get about 40 min of run time on the onboard tank. May be enough depending where you are but a 3 gallon external will last you multiple all-day trips. Hope you have a great time with your new setup. Be safe out there and thanks for the sub!
@@SKLIFEstyle Thanks for letting us know. I was under the impression that all parts and connections were compatible with Tohatsu, but Tohatsu does design the smaller Mercury outboards as well.
Hey man I’m 16 and I just got my first boat and I was wondering if you’d maybe wanna sell that motor because I don’t have a card to buy thing off of Amazon and all I have is cash
Hey I can appreciate the offer but I actually sold the boat and motor several weeks back. I got this from Walmart. If you buy a giftcard I am sure you can order it through their website. I got the short shaft version to work better with the inflatable's transom and depth. They had a decent selection to choose from.
I got up to about 15 mph, and it was fine. Maybe a two second adjustment when I got to my destination, but it stayed up, in place, and didn't require me to hold on to it or anything. When we got towed to escape a storm quickly over like 25+mph started to be a bit much. The wind kicked up with the storm and waves, too, so that I'm sure that had an effect as well. But other than that, I was impressed. It's worth the purchase, and it breaks down to basically a gym bag when you're all done. I have a video of fully putting it together. I also have a video of the storm to see the conditions. The top isn't up in the video but may help. Thanks for watching. Be sure to Subscribe! **SK**
I haven't seen anything to suggest they wouldn't be. That said, I am sure flushing it regularly to help stop build-up is warranted. Thanks for watching, be sure to Subscribe!
@simonjohansson7284 it worked out great and easy to use. Pretty sturdy and nice to know the parts would be easy to get if needed. I just sold it earlier this season along with the boat but only because it wouldn't have been used much and I didn't want it to sit.
I would say so. The extra weight may make it slower on take off. I think if you can got for 9HP. That extra couple MPH will make a diff. Unless weight or transporting it makes it a problem. I like this 6HP another 3 to 4 mph would be great. But that was also with being on Lake Champlain. If you are traveling many miles at one go then this should be okay.**SK**
Sorry, poor grammar and typing, must still be waking up. Hope that helped. Be sure to Subscribe! I will be doing more content on this setup, plus there's a chance we get a full size boat this year so lots of videos to come! **SK**
Thanks dude definitely helps I know it might be a bit underpowered but not trying to win any races just a little recreation and fishing around the local rivers and lakes just don’t want to be underpowered where the current is dragging me away for the price of $600 ish new I think I’ll give it a go it seems like good balance of price power and good fuel economy. Subscribed!
@joshuaswanson3068 Thanks! Yeah kind of where we were with it. Idk if we will bother upgraded the motor as the Catamaran won't get much use, and this does work just fine.
@@SKLIFEstyle I’m fixing to order one on eBay but it doesn’t tell you clearly would this be considered a short shaft motor because my transom measure too to bottom 15 inches so I definitely want a short shaft would you have any idea if this motor is the right fit ?
No there is no title or anything, no VIN to it. Our inflatable just came with a bill of sale, that was good enough to register. Be sure to Subscribe, I am sure I will be doing some follow up videos soon now that the weather is turning. Also shopping other boats too so a lot of content to come! **SK**
@SKLIFEstyle thanks for the quick response. Subscribed! I purchased the motor and I'm having a hard time getting it registered they are saying I need a title
@bigharv3232 If you don't mind me asking, and if you do no offense taken, what state is that? I know I went down a rabbit hole of thinking it may need some special coast gaurd registration because the boat was inflatable with an unverified motor. I bought peacemeal. Luckily, even here in CT with all our crazy laws, it was pretty simple for the DMV to create a title based on my receipts and bill of sale. I am sure there must be a workaround because you can't be the first to decide to buy an outboard, even a cheap Chinese one, and slap it on their John boat or something. Really hope you get things worked out. At least the season is just starting, so you have time.
@SKLIFEstyle texas. I've heard from a few people close to me that as long as the boat is registered I should be ok. But I'm uncertain this is my first boat
I believe that was referring to the gas to oil mixture ratio. Most 2stroke bottle will say how many oz to put in per gallon to be at a certain mixture ratio. If they only give the 50:1 just cut it in half. That was just for the break in period if I'm not mistaken. And then in bumps up to standard ratios.
I'd have to ask my wife if she remembers. I believe one did come in the mail since it is newer than 1999 or something in our state but I really couldn't recall.
We pulled the boat by the floor by accident to get us out a storm and I think it pulled the floor forward and made it easier for water to get under the floor and pool up in back. Just pulled the plugs put and most of it drained.**SK**
Well I am getting ready to run it for its 2nd season....didn't have problems running it months after summer last year when I went to winterize it. Fingers crossed it will still run fine now. Haven't had any issues. I would recommend the external tank. 3 Gallons is enough to run days without refilling. And when you do you can do it on land and bring thr tank back.
That was just stupid, why attack this guy? He got a motor that works and cost sufficient like most of us are looking for. Your is the only ASS(**&%&^$ comment here, doesn't that tell you something?
Total crap. I have a1963 Evinrude 5.5hp twin that starts on the first pull every time and sounds so much better than that thing and I bet is a lot more powerful, chinese crap always overstates the power
The floor was pulled forward just enough to allow water splashing to run under the floor and build up in the stern. I open the plugs to let it run out, but yes, def. had some learning curves to get through, lol. Thanks for the feedback. Be sure to Subscribe! **SK**
Motor sounds great. Glad to see someone actually follow the breakin procedure. Good luck going forward.
I purchased one last night after watching this video, I added a 4 year warranty the total came to $799.48 with tax.. I hope it arrives by the expected delivery date🤞🏾
If you did it through Walmart, the delivery was about 1 week. Happy this video helped you out. I am sure I will be doing follow up videos as we enter the second season with this motor. Be sure to SUBSCRIBE and check it out! And all the best with your new purchase too. **SK**
@@SKLIFEstyle yeah I grabbed it through Walmart, I subscribed and look forward to future content..
How’s it holding up after 10 months?
You should’ve bought the 6 1/2 that has a four stroke
@@Jevinrude_dude158do you have one how is it?
I bought this motor last Saturday and im 7 hours into the break in period. Ill probably finish breaking it in on Saturday. So far, a very solid engine. Great trolling motor for fishing.
@leoscomputerandguitarrevie978 yeah I was impressed in the quality and ease of use for a cheaper model. I put it through it's paces on a huge lake like Champlain and it still held its own. Thanks for sharing. Be sure to Subscribe!
@@SKLIFEstyleThank you for your reply. I have 12 hours into my motor now and it is just fantastic. The vibrations were aggressive starting out but it has calmed down quite a bit, especially at half throttle. I did take the prop off and greased the shaft, and also greased the throttle cable to help with longevity on those parts. Probably got 3 to 4 weeks of good fishing weather here in Michigan then I'll need to put the motor in storage for the winter. I'll be excited to put some hours on it next year. Probably thinking I should order some impeller kits so I have them, although it does come with one to use after 100 hours of use.
Hopefully yours is still running strong.
I subscribed!!!
i am talking myself into the 18hp thanks for running it
You would be ripping on something that big. Largest I've seen is like a 12hp on one of these. Np, thanks for watching, be sure to Subscribe!
Everyone is focused on how fast these motors run. The most important thing to me would be how easy it starts and how dependable the motor is. Being stranded on the waterr is serious stuff
Yeah, speed isn't isn't strongest suit. But even still, it wasn't that bad. But like you said I was happy with its ability for it to start. I was never left stranded.
You always have to carry oars.
I have a 14 foot flattbottom job boat and mine goes 17mph with me and my fishing gear same Hangai 6hp
I can see that, hull design can def. come into play. I have a hydrofoil for ours I never put on...maybe I will give it a shot this season on vacation. Thanks for checking out and commenting on the video. Be sure to Subscribe to catch the latest! **SK**
Great honest vid thanks for the info.
I plan to use the tank on top of my new 6hp Suzuki as a reserve. I’m gonna keep it full as a back-up plan in case I screw up and the remote tank runs out unexpectedly. Since it’s only 6hp I probably won’t ever be so far away that the top tank won’t get me back in a pinch
Yeah not a bad idea. More fuel on board the better. I felt like the top tank was enough for about 45 to 1 hr of running. So yea def. A good reserve amount to get ya back safe. Thanks for watching and commenting. Be sure to SUBSCRIBE!
your suzuki if its a 4 stroke takes about 1/4 gallon/hr at half throttle. 1/2 gallon at full or a little more. so it might be a while before you run out
@@ct1762 I now have a 3 gallon marine tank setup to compliment the tiny tank on the motor, so I feel like I'm good for anything. Better safe than sorry.
How’s it holding up these days? Great video I liked and subscribed
Thanks for showing it hooked up to a external tank! I was worried about this part because the tank on the motor has be small and I couldn't imagine it holding much. Id hate to try filling it up while on the water....probably end up dumping it in the water while filling it. I wonder if the 3.6 has the same feature, I know it won't do much, but I can pick up one for 150 and it would be good on my 2nd boat and I could test it out. Think this 6hp would push a 14ft aluminum vhaul jon boat with 2 people ok? Long as I can get like 7 mph id be happy.
after a tank of internal fuel the rings are more seated than they will ever be. heat cycle for an hour and thats it. 8 hrs break in is just insurance for the factory. if it doesnt start after 2 pulls give it a little gas. i see you kinda figured that out after yanking on the poor thing. the way to increase the life of the pullstart recoil spring is to pull the cord out until you feel resistance/compression then pull. you should see these guys ripping these when there is no resistance!
Yeah, I had a bit harder time starting up do to having just transporting it for a long distance. But any other time a couple pulls and it would always fire right up. Actually a pretty solid motor, and hard to see paying twice the price for the real mercury, especially when talking about such low horsepower. A big boat and such then yeah I would go for the reliability factory but for this application I think the cost savings is worth it.
Hi i had bought same as yours 5 months ago i used it in 14feet SIB boat, few weeks ago the engine failed when i was on the middle of the sea and it never started since so i paddled for nearly 4hours to go back to the shore. And i found out the CDI burnt. Better get a reputable brand before it happen to you same thing to me. Now im waiting now my new suzuki 20hp to be delivered.
Really sorry to hear that happened. It isn't main transportation so idk if we will upgrade soon..but I will be sure to give it a more thorough look through before use. And be sure I will post a video if it does blow 🤞.**SK**
I had all the start up procedure done including break in. I would suggest do not full throttle more than 45seconds it has not fitted with voltage regulator, thats why it burnt CDI
Don't expect his price... You can only say that you get what you pay for. We can buy seven Yamaha four punch six for this hangkai two punch six
I ended up getting a 9.8 old Merc then upgraded to a 15 Johnson starts every time a hauls me all over Folsom lake
@@kiheirc3195 thats actually the smart move. smooth reliable 40 year old power beats this new junk any day
Thank you 👍🏼
I wonder how it would do on a 12ft Jon boat been seeing these all over eBay for a decent price glad I seen this video
Hard to say, it would get ya around..might be slightly slower due to shape. I got up to 14.1 when on perfect plane, no gear and flat water.**SK**
Well I'm going to try my new buy hangki 6 horse on my 22 foot ( 7 meter ) mini cruiser tomorrow and post it so let me know what you think..
@@shutthedooronyourwayout how did it do?
how is is that motor holding up? thinking of picking me up an 18 HP
Peut tu me dire quelle embouts pour le réservoir à l’essence s’il te plaît je ne trouve pas sur internet
I have engine like this and per 4 y is without any problem... new gear oil each seson and once new impeller
Where to purchase the impeller and other service parts
Yeah ok video for the hangkai 6 horses.
A good work through on the running in process .
Did you fill the gearbox with oil if so which oil ?
What ratio two stroke oil did you use ?
Reply edited for spelling mistakes
It was 25 to 1 oil to gas and after 8 hrs you can move on to 50 to 1. As for the gearbox oil, I used Star Brite Pro Star Premium 90w Hypoid lower gear unit oil.**SK**
@@SKLIFEstyle does it not come with gearbox oil?
hey, 1 year later, the engine still works as well? I plan to buy it very soon and I wanted to know if it is reliable
cool vid, you were very honest and didn't push anything. I am trying to decide between this or a colman 3.5 haven't made up my mind yet.
Hey boss, I have the 2.6 Coleman, and it a piece of junk I've owned several other outboards, and the 2.6 is by far is the worst one I've ever owned.
If you have any other questions just let me know
@@jonathancordero6239 ty i was looking at those after a few comments here im going to go with the smaller mercury .. reliablity vs price i think is the best tbh
its oil in the bottom end not grease
I'm up here on lake Champlain as well. Have you uses this motor any more? Looking at this for my 14' river boat. Also whats the measurement from the top of the transom mount to the planer board above the prop? Thanks.
That's awesome. I don't have the motor any longer, I actually sold the boat earlier this year since it wasn't going to get much use for the second year in a row. But this was a short shaft so I feel like it was about 18 inch. They have two versions I believe but the short shaft worked great for this application.
What model of onboard gas container is it (3gal)?
@seselapaz it is a Spector I believe. High recommend it. No leaks. Quick connect. Basic fuel gauge. I had no complaints.
Don't worry bout them blisters they good for ya 😂😂
Lol, all the better to grip with I heard 😅
Lol thats right
For salt, cheap one like this or just go for a Honda 5 HP?
Hi thanks for the info i have a 3.5 but thinking of upgrading is this a long shaft?
They have a long shaft, but no, this is the short shaft version. Short is best for the size inflatable I purchased.
@@SKLIFEstyle Thanks for your reply Em no that's great i need a sort shaft for the American sundolifn 12 here in Ireland ,great stuff thank u is it definitely a good moter?
@Cavanpikefishing I thought it was. Ran well, decent powe, easy to operate, and pretty much a mercury clone, so if you did need want parts, it should be simple to find. Hard to justify over a grand or more for such little HP. Worked well with the external tank too.
@@SKLIFEstyle great news, thanks again😊
👍😎
I had one this outboard on a 20' open skiff. It worked well. You should check all the nuts and screws to make sure they are tight. Its a good engine for the money. Not so sure about SK Lifestyle.
Yeah, not a bad idea with all the vibration. What's not to be sure about the channel?**SK**
How fast did that go on your skiff? I got a 17' 05 Glastron Mx 175. I have had problems twice stuck on the water, and was wanting to get one of these as a back up. I was thinking of getting the 9hp one they sell. The total weight of the boat with a full tank is about 2,400 lbs, so lets say 3,000 with a few people on it... Could you estimate how fast that would go as well?? (First time throttle cable was loose, second time starter bolts broke) Unexpected things keep happening so thats why I want to put one of these as a backup...
Do you have a video on how to connect the external gas tank?
I do not but I can add it to my list of upcoming videos to make. I don't have plans to run the engine until vaca in a month but I am sure I can run it in a bucket for the demo, and will check that off the list and ensure it's okay for vaca too. Be sure to Subscribe to catch its release. **SK**
SK what side of Lake Champlian Vermont or NY. I grew up on NY side port Kent And Port Douglas area, now live in Atlanta.
We go all around, but the VT side is where we usually are.
Hey, is a service kit available to purchase for this motor?
@markweatherall7437 should be, just look for the mercury version in the same Hp. This is an exact replica.
@SKLIFEstyle Ok thanks for your reply appreciated 👍
How is this your brake in of the motor video when you say just after 8 mins that you were out on it for hours the day before and it was good on gas? I'm confused
It took I believe 8 hrs to break in the motor. I did it over a 2 day period. I was driving it the day prior at the speed specified and could tell it wasn't using that much fuel over hours and many miles driven.
Why didn't you use the choke when starting. Those engines should start at first pull with choke.
Hi. Do u know what weight ur boat is in this vid? Thanks....
Hey, I actually have a video on putting the boat together and a few others, be sure to Subscribe and check them out on my channel! You can find them in my boat life playlists as well. But the boat is about 110 lbs before any equipment. Thanks for watching!
We use the same lake
Hey mate
What fuel line did you use for the tank?
Cheers
Hey Shannon, I put the link to the hose I got from Amazon below. It was universal from Attwood for Mercury's. Thabks for watching be sure to Subscribe! **SK** Attwood 93806MUS7 Marine Boat... www.amazon.com/dp/B006MIXHSQ?ref=ppx_pop_mob_ap_share
Do these motors come with paperwork to get a title? Where I live 5 horsepower and above must be titled?
Usually a motor will come with a COO (Certificate of Origin from the manufacturer) which you then take to your local Dept of Natural Resources and after taxes and such are paid, they will issue a Title from the state you live in.
all new outboards run. question is how long they will continue to run.
Very true. Well we will put it to the test for season 2. And be sure I will post on it. We are looking to buy a full size fiberglass boat this season but we will still bring this out too. May even slap the hydrofoil on it too. **SK**
Why do you have an external petrol tank? I thought we could simply put petrol inside of the motor. Thanks for confirming
You can use the internal tank..its about 1/3 of a gallon. I was using a 3 gallon Septer. I hope to do a video on the tank soon.**SK**
To expand further I have the external tank to cut down on having to stop and refuel on the water. More prone to spilling with the internal tank needing refueling every hour and cuts out any concern that you are running low. It's enough to drive multiple days for long trips and it's just a plug in, nothing complicated.
hey mate, so 2 years have passed, how s the engine doing? had any problems?
@killzilla I sold it this summer, but it still ran excellent, fired right up, and no issues/concerns. Person I sold it too planned to use it often with the family. I think it is worth getting versus another model for 4x the price. Mixing gas isn't the most fun, but they may have a 4 stroke, if they do and it's a few bucks more that may be worth the spend to save the hassle. But otherwise I was pleasantly surprised. Thanks for watching. Be sure to Subscribe!
@@SKLIFEstyle Nice to ear that, probably gonna get one. Thanks for the swift answer by the way, you got my sub
@killzilla thanks. Highly recommend an external tank, otherwise you will only get about 40 min of run time on the onboard tank. May be enough depending where you are but a 3 gallon external will last you multiple all-day trips. Hope you have a great time with your new setup. Be safe out there and thanks for the sub!
hello, what connector you use for the gas tank? is a yamaha stile connector?
The connector should be Tohatsu style.
Mercury would be the equivalent for parts on this...that is the connector kit I bought and fits 100%.**SK**
@@SKLIFEstyle Thanks for letting us know. I was under the impression that all parts and connections were compatible with Tohatsu, but Tohatsu does design the smaller Mercury outboards as well.
Evinrude is the same
the choke is just backwards, so on is choke and off is open. Or vice-versa.....lol
Hey man I’m 16 and I just got my first boat and I was wondering if you’d maybe wanna sell that motor because I don’t have a card to buy thing off of Amazon and all I have is cash
Hey I can appreciate the offer but I actually sold the boat and motor several weeks back. I got this from Walmart. If you buy a giftcard I am sure you can order it through their website. I got the short shaft version to work better with the inflatable's transom and depth. They had a decent selection to choose from.
How does your canopy handle at 10 mph ?
I got up to about 15 mph, and it was fine. Maybe a two second adjustment when I got to my destination, but it stayed up, in place, and didn't require me to hold on to it or anything. When we got towed to escape a storm quickly over like 25+mph started to be a bit much. The wind kicked up with the storm and waves, too, so that I'm sure that had an effect as well. But other than that, I was impressed. It's worth the purchase, and it breaks down to basically a gym bag when you're all done. I have a video of fully putting it together. I also have a video of the storm to see the conditions. The top isn't up in the video but may help. Thanks for watching. Be sure to Subscribe! **SK**
Are they for salt water?
I haven't seen anything to suggest they wouldn't be. That said, I am sure flushing it regularly to help stop build-up is warranted. Thanks for watching, be sure to Subscribe!
Has it been good for you?
@simonjohansson7284 it worked out great and easy to use. Pretty sturdy and nice to know the parts would be easy to get if needed. I just sold it earlier this season along with the boat but only because it wouldn't have been used much and I didn't want it to sit.
Would this work for a 14/32 Jon boat ?
I would say so. The extra weight may make it slower on take off. I think if you can got for 9HP. That extra couple MPH will make a diff. Unless weight or transporting it makes it a problem. I like this 6HP another 3 to 4 mph would be great. But that was also with being on Lake Champlain. If you are traveling many miles at one go then this should be okay.**SK**
Sorry, poor grammar and typing, must still be waking up. Hope that helped. Be sure to Subscribe! I will be doing more content on this setup, plus there's a chance we get a full size boat this year so lots of videos to come! **SK**
Thanks dude definitely helps I know it might be a bit underpowered but not trying to win any races just a little recreation and fishing around the local rivers and lakes just don’t want to be underpowered where the current is dragging me away for the price of $600 ish new I think I’ll give it a go it seems like good balance of price power and good fuel economy. Subscribed!
@joshuaswanson3068 Thanks! Yeah kind of where we were with it. Idk if we will bother upgraded the motor as the Catamaran won't get much use, and this does work just fine.
@@SKLIFEstyle I’m fixing to order one on eBay but it doesn’t tell you clearly would this be considered a short shaft motor because my transom measure too to bottom 15 inches so I definitely want a short shaft would you have any idea if this motor is the right fit ?
I just purchased the same motor, how do i get title?
No there is no title or anything, no VIN to it. Our inflatable just came with a bill of sale, that was good enough to register. Be sure to Subscribe, I am sure I will be doing some follow up videos soon now that the weather is turning. Also shopping other boats too so a lot of content to come! **SK**
@SKLIFEstyle thanks for the quick response. Subscribed! I purchased the motor and I'm having a hard time getting it registered they are saying I need a title
@bigharv3232 If you don't mind me asking, and if you do no offense taken, what state is that? I know I went down a rabbit hole of thinking it may need some special coast gaurd registration because the boat was inflatable with an unverified motor. I bought peacemeal. Luckily, even here in CT with all our crazy laws, it was pretty simple for the DMV to create a title based on my receipts and bill of sale. I am sure there must be a workaround because you can't be the first to decide to buy an outboard, even a cheap Chinese one, and slap it on their John boat or something. Really hope you get things worked out. At least the season is just starting, so you have time.
@SKLIFEstyle texas. I've heard from a few people close to me that as long as the boat is registered I should be ok. But I'm uncertain this is my first boat
Crazy quiet , really, should hear 4 stroke
This is actually the 2 stroke. When it's under way there is some noise but idle speeds, ya she's super quiet. **SK**
The Hankai 4 strokes are mostly air cooled, so they are like push mowers in volume.
Where is this Florida?
Not quite, though I certainly wouldnt mind...but its actually on Lake Champlain in VT.**SK**
What lake is this?
He said in the Vid its lake Champlain.
What lake are you on?
Lake Champlain
How kuch does this unit weigh?
Right at the 50lb mark, maybe just slightly under dry. If you carry it I'd suggest a glove since the handle isnt well rounded off**SK**
21kg
Ole boy needs schooling on 2strokes he don't know
how much did this cost
When I got it, it was like $450 I believe
Anybody have luck finding a mechanic to work on these Chinese Outboards?
where do you live?
@@miamiwax5504 I'm in CT
You filled a leg with grease? They take leg oil its a gearbox....
What do you mean 25 to 1?
I believe that was referring to the gas to oil mixture ratio. Most 2stroke bottle will say how many oz to put in per gallon to be at a certain mixture ratio. If they only give the 50:1 just cut it in half. That was just for the break in period if I'm not mistaken. And then in bumps up to standard ratios.
Did you get a title
I'd have to ask my wife if she remembers. I believe one did come in the mail since it is newer than 1999 or something in our state but I really couldn't recall.
a lot of water in your boat
We pulled the boat by the floor by accident to get us out a storm and I think it pulled the floor forward and made it easier for water to get under the floor and pool up in back. Just pulled the plugs put and most of it drained.**SK**
That’s normal for small boats
This engine going to give you more headache then happines.
little gas and a pull yeye
How long has it lasted with minimal problems so far
Well I am getting ready to run it for its 2nd season....didn't have problems running it months after summer last year when I went to winterize it. Fingers crossed it will still run fine now. Haven't had any issues. I would recommend the external tank. 3 Gallons is enough to run days without refilling. And when you do you can do it on land and bring thr tank back.
Dude u dont know about outboard motors lmao
Lol
my 1987 tohatsu 5hp would run circles around your pos china made dont want to start motor
That was just stupid, why attack this guy? He got a motor that works and cost sufficient like most of us are looking for. Your is the only ASS(**&%&^$ comment here, doesn't that tell you something?
Total crap. I have a1963 Evinrude 5.5hp twin that starts on the first pull every time and sounds so much better than that thing and I bet is a lot more powerful, chinese crap always overstates the power
These are clones of the 5hp Mercury 2-stroke motors.
it is copy of Tohatsu M5B (5HP 102ccm)
I think your boat is sinking, its taking in quite a bit of water
The floor was pulled forward just enough to allow water splashing to run under the floor and build up in the stern. I open the plugs to let it run out, but yes, def. had some learning curves to get through, lol. Thanks for the feedback. Be sure to Subscribe! **SK**