Spot on with the GD clean after 60000 km. Hope if you get in later to strip further. We would have to get made here in SA. I did pick up liked made tool with 6 points. I use WD40 once loose turn back then forward to clean. Noticed you used 12 point to put back as easier. I watch fully top class as always well done.
13mm hole is a waste of time. It will flow as much soot as if the plate weren't there. The ecu checks sufficient egr flow via the MAF. That's why people have to keep making the hole bigger to the point that the ecu is happy with the flow. Only way is to blank it and fit a cheat chip/harness or have the car tuned and switched off that way.
Thanks Anthony, you're the only person who takes the time to compare, before and after results of fitting a plate or Catch Can.
Thanks Anthony good to c GD u r so good to listen to
Spot on with the GD clean after 60000 km. Hope if you get in later to strip further. We would have to get made here in SA. I did pick up liked made tool with 6 points. I use WD40 once loose turn back then forward to clean. Noticed you used 12 point to put back as easier. I watch fully top class as always well done.
So lucky the 1gd and 2gd engines dont come with egr and dpfs in our country
Tell me you live in the 3rd world without telling me 😂
Which country is this? And what model exactly is it? I'm from Jamaica and we don't get the SR5 invincible model
@@jvdthomas IM FROM PANAMA, HERE OUR 2.8 1GD FTC DOESNT HAVE A DPF... CANT TELL IF IT HAS AN EGR
Hi, l used a hand held butane torch, place heat on nuts and they come off very easy 1st time and you are not over stressing “cold” nuts and bolts
My 1gd FTv has more then 100000 km, checked intake one week ago, was more dirty than your. I’m gonna to clean it.
Some time want to block egr system 😏
very good master
Are these plates available ? Kaon has no listing ?
Thanks for this!👍👍👍
That plate for 1GD-FTV is not on the Kaon website.
Nice
Wish you made vids on Tritons :(
thank you
13mm hole is a waste of time. It will flow as much soot as if the plate weren't there.
The ecu checks sufficient egr flow via the MAF. That's why people have to keep making the hole bigger to the point that the ecu is happy with the flow.
Only way is to blank it and fit a cheat chip/harness or have the car tuned and switched off that way.
Very professional advice and techniques, thanks Anthony
Big T's R&D on show. If they did it right on ALL their diesels, there would be no issue. EGR is BENEFICIAL if it's done RIGHT!
Thanks great information
Hi there, try to use induction heater😄
What kind of engine oil do you use in this beaut of an engine?
This has the 13mm hole can you use the 7mm hole from kaon?
7mm is for the 1kd
Can you recommend a fuel injection cleaner that you should use, I.e every 10,000km that may help with your injectors?
Does this engine have a overheat problem?
Bom dia! Onde compro?
right
Kaon dont sell the 1GD egr plate anymore as they said it caused fault codes, any idea who does December 23
aw my God its way more easy then that man come on ,hhhhh