MTC Failure fix on a KTM 1290

Поділитися
Вставка
  • Опубліковано 9 лис 2018
  • 2015 KTM 1290 Superduke R with an "MTC Failure" warning and how I fixed it.

КОМЕНТАРІ • 23

  • @kevinpivato5185
    @kevinpivato5185 5 місяців тому

    I purchased a 14' super duke in hopes of engine swapping it into a yamaha raptor 700 atv. I fought this issue for 4 years...... after watching this video I got it running in 10 minutes! Thank you so much for posting this video!!!!!!

  • @ryandsucks
    @ryandsucks 5 років тому

    I have learned something from each video. I always thought that high pitched whirring sound was the fuel pump. I don't know why. Thanks again!

  • @enchantedape8180
    @enchantedape8180 21 день тому

    Thanks for the video. I may he have a similar issue. All of a sudden my cold starts after a few days. I need a little help from the throttle. Stepper motor is whining and has brand new battery.

  • @pixeljoggy4165
    @pixeljoggy4165 2 роки тому

    Guter Mann !

  • @burgers222
    @burgers222 6 місяців тому

    I had this exact same issue, MTC fails and the starter won't spin over. There was no sound of the TB servo "sucking". I lubricated the external throtle linkages and manually operated the throtle several times, this fixed the "no suck" and the engine cracked over and fired.

  • @TROUROCKS
    @TROUROCKS 6 днів тому

    MTC failure is the first thing u get with these bikes I'm ripping the ECU out in goes a microsquirt

  • @kennethhobbs7563
    @kennethhobbs7563 5 років тому +1

    hello I have a 2017 super duke and randomly get the mtc failure. It first happened when I was out riding for awhile and then I noticed I had lost power I looked down and it was flashing the MTC Failure and it went into limp mode. I pulled over, hit the on/off button a few times and it finally went away and everything went back to normal. It didn't happen again for a few months, (about 1000) miles later and same thing flashed mtc failure and i just had to let it sit and hit on/off a few times.
    Any ideas what this could be?
    I have the rottweiler stage 2 with the power commander, arrow exhaust and arrow cat eliminator .
    Thanks.

    • @chrisprice3391
      @chrisprice3391 4 роки тому +1

      Kenneth Hobbs : hey mate the same thing happened to mine just now. Did you manage to fix the issue?? My Superduke is stock tho with mods done to it

    • @whostolemycrabs
      @whostolemycrabs 3 роки тому +1

      @@chrisprice3391 Same issue... :(

    • @highzenburger1829
      @highzenburger1829 2 роки тому

      Same did you guys find solution?

    • @kennethhobbs7563
      @kennethhobbs7563 2 роки тому

      @@highzenburger1829 yes, rottweiler came out with a Healtech 'ESE' Exhaust Servo Eliminator
      To replace the servo motor , the servo motor was the culprit. I have had no issues after installing this .

    • @matiticreative9059
      @matiticreative9059 Рік тому

      @@whostolemycrabs same issue

  • @michaelfisher9381
    @michaelfisher9381 7 місяців тому

    Well maybe you can help me. I have the same exact bike. Installed the Rottweiler stage 6 kit. And the bike was running well for about a week. Now I have nothing but mtc failure. No throttle. And when I try to change modes, it tells me to close the throttle. my bike does start my bike does run, but it just idles. There is no acceleration.

    • @vasilet5518
      @vasilet5518 2 місяці тому

      I have the same problem, could you come back with an update if you have solved it?

  • @travisporter194
    @travisporter194 3 роки тому

    I'm getting ABS failure. Any solutions??

    • @matiticreative9059
      @matiticreative9059 Рік тому

      same here

    • @erixlast6020
      @erixlast6020 10 місяців тому +1

      New battery?

    • @davidgun6826
      @davidgun6826 9 місяців тому +2

      brake fluid needs to be changed at lest every 2 years to prevent crud from clogging ports in ABS control valves, I found this out the hard way.

  • @luisreyes-lo7qw
    @luisreyes-lo7qw 4 роки тому +1

    Amigo tengo un problema similar me puede colaborar