T30 torx, t25 torx, 17mm wrench(and a stubby 17 if you have one), pick tool, long 1/4 extension, 7mm socket for pipe to throttle body, oil filter wrench socket for oil filter. After you have it off carb spray, small long flat head and pick to get into the ports and a 24mm socket for crank pulley.
I have the same car. I had a little accident,and some hoes broke from the coolent system. I can see it in the video,but I cant really see how it is . Is there a way you could answer me back and help me out ?
Intake is out of my 2010 CC - now the fun part, clean and replace. Thank you for filming this!
Where i hesitated doing this job was that metal fuel line hose .i thought i had to remove that from both ends .thanks
Can you list the all the tools you used?
Also, great idea recording yourself just so you can remember where everything goes afterwards.
T30 torx, t25 torx, 17mm wrench(and a stubby 17 if you have one), pick tool, long 1/4 extension, 7mm socket for pipe to throttle body, oil filter wrench socket for oil filter. After you have it off carb spray, small long flat head and pick to get into the ports and a 24mm socket for crank pulley.
Brads Automotive LLC thank you
I have the same car. I had a little accident,and some hoes broke from the coolent system. I can see it in the video,but I cant really see how it is . Is there a way you could answer me back and help me out ?
Thank u
Have you done it yet
Yes not hard
Do you have to program it after
No sir, just make sure when u prime the fuel line, there are no leaks and make sure u dont forget the slats inside the intake ports
Also remember to grab your ratchet off the crank pulley b4 u start it up again
I can't get it to start now I didn't prime it it could that be the problem
Did u make sure and not turn the crankshaft counter clockwise? Also did u make sure your valves were closed while you where cleaning them?
They where close
why does no one show all steps to the tasks performed? you dont do an 'instructional' video and not provide complete instructions and references
Because the video would be like 2 hours long man, think about it, that's why I explain everything you need to know to do it.
camera moves too much !1
Well it is on his head 🤨