Hi, i have a magnum 4000 power washer. I changed the diesel pressure pump and greencolor magnet. But still there is no fuel flow to the burner. Can i know what should i do?
I have ducr work for my heater sometimes it will rumble not to often is it because the burner had duct work that gose to a 90 shooting the heat out the back of the truck dosnt rumble all the time
I've got a pressure pro 3500 unit with 140hrs on it and I bought it new back in 2021 but I push the switch and the red light comes on but the blower doesn't come on and I drained the clear fuel filter and the diesel dosent fill back up what's wrong with my hot side?
Hello Devon, Without knowing the specifics of your burner, I can only offer limited insight. That said - generally, if there is no fuel draw to your burner, there is either a problem with the burner pump (ie clog/blockage, electrical, or safety switch), a bad fuse that is affecting the pump operation or air in the fuel line. If your unit utilizes any safety switches such as a pressure, or flow switch, the burner may not kick on if either of those are bad. Check for any bad fuses on the unit, check all other electrical connections on the burner and re test. Your unit should have come with an operations manual for the burner, that would be the best resource for troubleshooting any further.
Is the smoke coming from the engine, or from the pump? If it is coming from the engine, you will want to get that looked at by a servicing dealer found on our dealer locator on our website. If the smoke is coming from the pump, that is most likely steam coming from the thermal valve. That would mean your machine was run hot and should be inspected for further damages.
You must build these cleaners. Damn nice work.
Hi, i have a magnum 4000 power washer. I changed the diesel pressure pump and greencolor magnet. But still there is no fuel flow to the burner. Can i know what should i do?
Thank you for posting.
I have ducr work for my heater sometimes it will rumble not to often is it because the burner had duct work that gose to a 90 shooting the heat out the back of the truck dosnt rumble all the time
I've got a pressure pro 3500 unit with 140hrs on it and I bought it new back in 2021 but I push the switch and the red light comes on but the blower doesn't come on and I drained the clear fuel filter and the diesel dosent fill back up what's wrong with my hot side?
Hello Devon,
Without knowing the specifics of your burner, I can only offer limited insight.
That said - generally, if there is no fuel draw to your burner, there is either a problem with the burner pump (ie clog/blockage, electrical, or safety switch), a bad fuse that is affecting the pump operation or air in the fuel line.
If your unit utilizes any safety switches such as a pressure, or flow switch, the burner may not kick on if either of those are bad.
Check for any bad fuses on the unit, check all other electrical connections on the burner and re test.
Your unit should have come with an operations manual for the burner, that would be the best resource for troubleshooting any further.
My machine recently is blowing white smoke from the bottom.
Is the smoke coming from the engine, or from the pump?
If it is coming from the engine, you will want to get that looked at by a servicing dealer found on our dealer locator on our website.
If the smoke is coming from the pump, that is most likely steam coming from the thermal valve. That would mean your machine was run hot and should be inspected for further damages.
Video from 2018, website still "coming soon".... I find this intriguing.
Hello, you can visit our website at vortexxpressurewashers.com/