How to Put AIR Back in Your Aerosol Spray Can (Fast and EASY)

Поділитися
Вставка

КОМЕНТАРІ •

  • @ronbuckner342
    @ronbuckner342 9 місяців тому +14

    Dude after watching your video i went right out to my garage and did that and it worked. Thanks soo much awesome video!

  • @warrenhardy4293
    @warrenhardy4293 3 роки тому +9

    Thanks I didn't know the PSI was needed.👍

  • @moxee33
    @moxee33 2 роки тому +7

    Finally a good video on the subject! Thank you 👍

  • @sejinoh2759
    @sejinoh2759 6 місяців тому +3

    Thanks! I can't wait to try this later today!

    • @ACDesignsGarage
      @ACDesignsGarage  6 місяців тому

      Thank you for watching!!! It works pretty well ,just always be safe and don't overfill!!

  • @johnd.5480
    @johnd.5480 2 роки тому +4

    Is the air charge enough to last for the remainder of the contents, or do you need to pressurize multiple times?

    • @ACDesignsGarage
      @ACDesignsGarage  2 роки тому +3

      I had to refill this one 1 more time after the video. Thanks for watching!!!!!!!

  • @sunkissed6413
    @sunkissed6413 Місяць тому +1

    Let me see if this works for my glade spray bottle! Sick of glade not putting enough air in the can. It’s still half a bottle with no air in it

  • @trevorjames5493
    @trevorjames5493 3 місяці тому

    Can you do this with a regular bike pump or does it have to be like a compressor with power pump

  • @neiljumpinjackflash7551
    @neiljumpinjackflash7551 3 роки тому +3

    Can this work for rattle spray paint cans with plugged lines? Usually paint cans run out of pressure then the paint clogs up and half the can is still full of good paint.

    • @ACDesignsGarage
      @ACDesignsGarage  3 роки тому +1

      It should, jist make sure to put a rag over the valve when you fill it, or the paint may spray you in the face when you release it, then just put the air in in short burst. Hope this helps and thanks for your comment 👍

    • @neiljumpinjackflash7551
      @neiljumpinjackflash7551 3 роки тому

      @@ACDesignsGarage Thanks man!

  • @moxee33
    @moxee33 2 роки тому +1

    I can't find the valve core you are using ANYWHERE :( I like the wider rubber bottom unlike all the others I see. What is the brand please?

    • @ACDesignsGarage
      @ACDesignsGarage  2 роки тому +1

      I posted one like I used in the description below the video. The smaller ones will work as long as it seals against the metal, you have to really push hard on some of them, any more help let me know!!!!

  • @vtt3808
    @vtt3808 3 роки тому +2

    Thanks for the video :) May I know what is the name of the connector you attached to the can pls? And can you pls put the link in ur comment above pls?

    • @ACDesignsGarage
      @ACDesignsGarage  3 роки тому +1

      Thanks for the support here is simular to what I used in the video, click the amazon link below
      www.amazon.com/Milton-S-148-NPT-Lever-Blow/dp/B001XBI1E2/ref=mp_s_a_1_2?crid=3GUP0P7Y7J5PV&dchild=1&keywords=air+blow+gun&qid=1635296825&sprefix=air+blow&sr=8-2

  • @TheWinezen
    @TheWinezen Рік тому +1

    can you use this method on cans that come without that short, white plastic stubby tube at the top?

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому

      I haven't tried that yet.

    • @steveherr450
      @steveherr450 Рік тому +2

      for the ones with the stubby connected to the nozzle instead i use a needle valve like you use to fill up sport balls with a hand pump. Just insert the needle valve into the can. even if the plastic stubby is on the can you can still use a needle valve instead of a tire valve stem.

    • @hope4ourfallen
      @hope4ourfallen 6 місяців тому +1

      ​@@steveherr450That was a really cool tip. Thank you for the added idea.

  • @richardpalko8062
    @richardpalko8062 5 місяців тому +1

    I'm convinced that the rare cans that have lost pressure must have incurred damage to the valve seal during manufacturing. For re pressurizing the can you can make an overspray canopy skirt by poking a hole on the inside bottom of a sandwich bag and pushing the small end of the tire valve through the inside bottom of the bag so the bag fits snug closer to the bigger end of the valve. Then you shroud the top of the can with open part of the bag with the small end of the valve facing up ready to take air pressure and the bag should control most of the overspray .

  • @JustMyFish
    @JustMyFish 4 роки тому +4

    Thanks that’s cool I learned something new 😊👍🏻💞

  • @jamesproctor4858
    @jamesproctor4858 Рік тому +1

    Great video. Keep during this type of video. God bless you

  • @pacvend
    @pacvend 5 місяців тому +1

    If my paint spray cans don't work could it be dried paint in siphon tube?

    • @ACDesignsGarage
      @ACDesignsGarage  5 місяців тому

      That or maybe try switching the tips, ive had that happen before, the tips get clogged or soak the tips in mineral shirts that will clean them out!!!

  • @nellou5527
    @nellou5527 Рік тому +1

    Will I be safe if I buy the valve and use the air compressor at the gas station? My sister gave me a $45 dry shampoo but she can’t return it bc it was an Amazon sale or something. It’s completely full practically.

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому +1

      Im not sure, the wd cans are filled with 90psi not sure about the dry shampoo can

    • @nellou5527
      @nellou5527 Рік тому

      Thanks for the response and the video!

  • @Edgar4T007
    @Edgar4T007 4 місяці тому +1

    Great video 👌

  • @Latanya-eq2hz
    @Latanya-eq2hz 3 роки тому +1

    If i want to fill the aerosol 5with butane can. How do i attach the gas to the can?

    • @ACDesignsGarage
      @ACDesignsGarage  3 роки тому +1

      Thanks for the question, ill have to do some research, at the moment I'm not real sure how. I'm sure where there's a will there's a way lol

  • @boston-strong8887
    @boston-strong8887 2 роки тому +2

    Great video. Thank you!

  • @edaw8529
    @edaw8529 Рік тому +2

    IDEALY YOU WOULD WANT TO USE INERT GAS TO PRESSURE THE CAN

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому

      You are correct it works alot better

    • @techtinkerin
      @techtinkerin 5 місяців тому

      Guy doesn't understand what you mean😂

  • @spec1923
    @spec1923 2 роки тому +8

    I poked a hole in the can and poured it into a spray bottle.

  • @robertdiamondoil2384
    @robertdiamondoil2384 Рік тому +1

    I usually puncture the can and put it in a mason jar then use a small brush
    I’ll have to try this

  • @JohnW1711stock
    @JohnW1711stock Рік тому +1

    Excellent!

  • @olegiezer
    @olegiezer Рік тому +1

    Thank you 🙏🏼

  • @makolic1
    @makolic1 6 місяців тому +1

    isn't there a risk of the can exploding ?

    • @ACDesignsGarage
      @ACDesignsGarage  6 місяців тому +1

      As long as you keep it under 60 psi your fine.

    • @techtinkerin
      @techtinkerin 5 місяців тому

      Hmm let me think how does a combustion engine work, fuel, air under pressure. Yeah sounds perfectly safe honestly 🤭

  • @jcaleca60
    @jcaleca60 8 місяців тому +1

    Thanks

  • @joeyortiz13
    @joeyortiz13 Рік тому +1

    Thank u

  • @kyrahirsch4367
    @kyrahirsch4367 Рік тому +1

    can i do this for all my hairspray cans that lost pressure and stopped working? 😂

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому

      I tried it for my wife with not much success lol not sure why.

  • @Gieszkanne
    @Gieszkanne Рік тому +1

    Puncture it fill the rest into a spray bottle do work also.

  • @UranusAnalyst
    @UranusAnalyst Рік тому +1

    If you really desperate and really need the liquid subtance but have nor time and tools . Just flip the WD40 can upside down and press the trigger.
    This will put leftover Liquid on the upper can part near the trigger and the liquid will came out by bit

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому +1

      Thanks for the tip, I cant stand these new cans they always run out of aerosol early for some reason.

  • @marmac567
    @marmac567 11 місяців тому +1

    I got another way, stamp on the can

  • @jimjackson4256
    @jimjackson4256 Рік тому +2

    It is too bad they didn’t make them so they didn’t lose air so quickly.

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому

      Yeah I totally agree, you can do the same process with paint but it can get messy lol

    • @Gieszkanne
      @Gieszkanne Рік тому

      I found an at least 10 year old bottle of a break cleaner. Its almost empty but the spray still work. I think this is on purpose.

  • @rm5337
    @rm5337 Рік тому +3

    This is definitely not fast and easy! I'm not about to go out and by parts to fill a small can of WD-40! If WD-40 CANS ARE DEFECTIVE,and apparently they are,than I won't ever purchase one again! This problem has happened before, so I BLAME THE COMPANY for it's DEFECTIVE PRODUCT!

    • @ACDesignsGarage
      @ACDesignsGarage  Рік тому +1

      That is the reason i tried this refill stuff because wd has gone down hill.

    • @rstoertz
      @rstoertz 7 місяців тому

      Well, it's not just WD-40, of course. I have a more expensive can of auto undercoating that is a few years old, and lost pressure. I got one squirt out of it, so I know the stuff inside is still good. That's why I am here. If your compressor is set to 90 psi or less, you don't really need the extra gauge. Just a tire chuck, which most people have, if they have a compressor, and the valve stem that you might need to buy. It's a small price to pay!

  • @techtinkerin
    @techtinkerin 5 місяців тому +1

    Has it not occurred to you that you're putting fuel and air under pressure inside a metal container? Think about how an engine cylinder works, add heat and boom. Would be safer to pressurise with butane ior carbon dioxide.

  • @kennth5664
    @kennth5664 Рік тому +3

    Every time I see one of those Examples , never show BEFORE/AFTER.WHY, THIS GUY USED SAME CAN HE FILLED UP, BEFORE, With the Second Test P.S No Before/After.

  • @marmac567
    @marmac567 11 місяців тому +1

    Or put it in hot water for a second

  • @BitSmythe
    @BitSmythe 6 місяців тому +1

    *NO NEED to say “what’s up guys.* Sounds stupid.

  • @robertjahrling2025
    @robertjahrling2025 Рік тому +1

    GET OUT