Inside A Bad Strut Mount Bearing And What Causes It to Make Noise
Вставка
- Опубліковано 26 лип 2024
- In this video I feature a couple of strut mounts with an integrated bearing, one bad and one good. I go over how the strut mount works. I also show what the inside of the bad strut mount looks like and what causes it to make noise such as the one featured in the video linked below. I also go over what causes it.
Note: The strut mounts featured in the video has the bearing built into it. Some strut mounts do not come with an integrated bearing. It is the bearing portion of the strut mount that makes the noise discussed in the video. Strut mounts and bearings can and do fail in different manners.
Also, this video is only information. It is not a guarantee that the noise you hear on your vehicle, even if it sounds like the noise discussed, is a strut mount bearing.
Here is a link to that video discussed in the video and mentioned above.:
• What Bad Strut Mounts ...
DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guarantee that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. - Авто та транспорт
Interesting. I never before saw the bearing dissembled. Thank you for sharing.
You are welcome!
Super excellent video. I was wondering about how a strutt mount bearing works.
Great video showing the mechanism. Thanks a lot. Very educational, slowly building up my mechanical knowledge of cars up!
big help thanks for the video
Wow! Thanks!
Pretty sure this is my issue, get a twisting spring sound when turning left or right, Jack car up it makes no nose only does it under load, only started when I change worms shock and spring
Great video
Thanks for the video, good info!
Glad it was helpful!
Could a strut mount also cause noise while driving? My sienna has a bad strut mount already know that, but while driving over 30+ mph it creates a noise all the time. I've narrowed it down to the strut, the strut looks to be fine.
I bought a set of quick struts but they are tight at the top and don't turn easy like you show..i have not installed them yet.is that normal..
Installed a pair of KYB's Strut-Plus ready struts on my 2012 Toyota Prius, 2nd pair by the way. These struts are making creak and squeak noises when steering at low speeds. This is the case with both sets received and stalled. Have you heard of bad mounts on new struts? It is my understanding that although KYB is the OEM for Toyota, Toyota does not use their mounts, I think I see why.
It's very possible to have bad mounts on new struts. But, it's pretty rare that your get two sets with the same problem.. You may need to be looking elsewhere for the source of your noise.
I installed brand new KYB Strut Plus units on my car and found that they now have a springy Clunk noise at the first instance of steering now. It only happens for the first few minutes when I drive. I have worked countless hours on this. Replaced Sway Bar's, Re-Torqued under load and followed all of KYB's support tech info plus trying to spray white Lithium grease into the bearing assembly from the side (Yes, they told me to do that too, and still have that springy clunk when I first steer the car left to right. 2009 Honda CRV and the issue was never present with the OEM strut assembly. Can anyone give me some advice here? I feel like KYB should be sued due to all the time I have spent on this plus 2 Wheel Alignments after the post work done.......beyond frustrated.
Can this be rebuilt..if ball-bearing not lost ?like pack it full of grease again ?
Never done that. Usually they are replaced.
I have a bad strut mount bearing on my Cadillac 2006 DTS , does this mean I will also need a new or used strut ?? Just had 2 struts from a salvage place about a yr ago ??????? Ty
I don't know. You'll need to find out if they are bad I guess.
I have a video on my page if anyone wants to check out. It’s my F-150, making a squeal or squeaking noise only when turning under load. I’ve been told it’s the strut mount. There is no knocking whatsoever