3/5 Drop Kit on 1988-1998 Single Cab Djm & Belltech Suspension Parts Reklez Suspension Works

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 150

  • @jeffreylescoe5624
    @jeffreylescoe5624 4 роки тому +3

    Hi Julio. It’s Jeff from Connecticut. In the early summer of last year I ordered the 4-6 Suspension drop kit for my 4-wheel-drive 1500 Chevy 2016. I need to let you know that the fitment was outstanding. I still had questions about installment though. The thing that amazed me was the fact that I called and heard the same voice over the telephone that I did on UA-cam. I remember calling four or five times and almost every time, it was you who answered the phone. I am very pleased With the product. My truck sits on 24 inch chrome wheels and I love the way it looks. Thank you again Julio. Outstanding job

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому +1

      Hey jeffrey I do remember talking to you. Thanks for the support and glad everything turned out good for you. Thanks again

  • @abdalrhmanh6746
    @abdalrhmanh6746 4 роки тому +3

    I watch this channel from 6 years ago wish you all the best guys

  • @andrewmoland4664
    @andrewmoland4664 4 роки тому +28

    Definitely would like to see the pros and cons of lower arms vs springs and spindles

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому +4

      Got it!

    • @TopwaterTony
      @TopwaterTony 4 роки тому +1

      Ditto

    • @kaspertheghost7198
      @kaspertheghost7198 4 роки тому +10

      I did 4” lower control arm.
      Rode like factory.
      Then did spring and spindle. Rode like a brick.

    • @64xSaldanax
      @64xSaldanax 4 роки тому

      I would like to see air ride content for the obs

    • @JoseCastillo-wo5pt
      @JoseCastillo-wo5pt 2 роки тому

      @@ReklezSuspensionWorks what lifting shackles did you use or what brand are they

  • @michaellopez968
    @michaellopez968 4 роки тому +11

    Yes do a comparison video on spindles springs vs control arms and stuff I wanna do a 4/6on obs how do I do it

  • @craigluitjohan621
    @craigluitjohan621 4 роки тому +2

    I really like all your videos. I own a 94 Chevy 1500 extended cab. I have recently bought the DJM 4" lowering kit front upper and lower control arms with coil springs. Along with shocks for front and back. Also the kit came with the 6" flip kit plus notch for the frame. I bought the Belltech drive line kit. Like I said love the videos very informative 👍👍

  • @michaellopez968
    @michaellopez968 4 роки тому +1

    Been following yall since 2016

  • @oldmanairsoft209
    @oldmanairsoft209 4 роки тому +4

    Another clean install.. man been waiting for another video thought you guys forgot about us..keep up the clean work and going that extra mile..✌

  • @JavierMayol
    @JavierMayol 4 роки тому +6

    Q&A at the end is a great idea. Keep up the great work!

  • @Esteban-MK64
    @Esteban-MK64 4 роки тому +1

    I watch anything and everything you guys put out. It’s all great info. Lots to learn from! Keep up the amazing work👍

  • @USMCVET-kl1yn
    @USMCVET-kl1yn 3 роки тому +4

    Does the 5 inch drop in the rear require a c-notch?

    • @bryanbravo6217
      @bryanbravo6217 2 роки тому +1

      its better to have one to prevent axles from bottoming out

  • @richardmartinez1586
    @richardmartinez1586 4 роки тому +2

    A video using your products on a 95-99 Tahoe 2wheel drive would be awesome

  • @daleescareno8694
    @daleescareno8694 3 роки тому +1

    And would you recommend airbags or coilover kits

  • @FAT818BOY
    @FAT818BOY 4 роки тому +2

    Control arm va spindle video
    I have a 98 Silverado ext cab. What’s the best way to drop the front 4 inches?

  • @daleescareno8694
    @daleescareno8694 3 роки тому +2

    I would like to see a 2000 Tahoe four-door with a C notch in a 4/6 drop with some 22s

  • @bickle_94accord
    @bickle_94accord 7 місяців тому

    Did you guys have any trouble getting the sway bar to line up with the control arm? My 98 suburban has djm upper and lower control arms bought as a 3in kit.

  • @TopwaterTony
    @TopwaterTony 4 роки тому

    Why was the back end raised up one inch? Why not stick with the 6in drop?

  • @freshG214
    @freshG214 4 роки тому +2

    Would like to see pros and cons of springs and spindles vs control arms only

  • @wickedc10
    @wickedc10 4 роки тому +2

    Did you ever get footage from full frame silverado build? The finished truck

  • @bigjondrags
    @bigjondrags 4 роки тому +2

    Any updates on the body dropped single cabs?

  • @Juandedioscjr91
    @Juandedioscjr91 4 роки тому +9

    Control arm or spindle spring video 👍

  • @JustinTime187
    @JustinTime187 4 роки тому

    How to get the pinion angle the right degrees

  • @agustintorres2649
    @agustintorres2649 8 місяців тому

    I was looking yall website I don't seem to find the control arms so yall guys discontinued them?

  • @franw51
    @franw51 4 роки тому +2

    So is the 3/5 in a kit you guys sell? 5" drop must require a c notch

  • @jakewade7388
    @jakewade7388 3 роки тому

    Who makes the wheels that are on the truck at the end of the video? They look great.

  • @JoseMALDONADO-rz4dt
    @JoseMALDONADO-rz4dt 2 роки тому

    On those ss wheels are they running 275/60s front and back?

  • @themrbrown510
    @themrbrown510 4 роки тому +2

    what is the tire size on this drop?

  • @andresniederhofer8602
    @andresniederhofer8602 4 роки тому

    Have y'all done the comparison video for the drop control arms. Vs the springs vs spindle?

  • @theyounghawk
    @theyounghawk 3 роки тому +1

    What is the tire size on the truck? I want to know so I can get those and do the same drop. Btw, thanks for the info will buy this suspension kit soon

  • @rl4643
    @rl4643 3 роки тому

    On the extended cab do you need to reposition the carrier bearing?

  • @jasonmartin1581
    @jasonmartin1581 3 роки тому

    I would love to see the video on spindles vs lower control arms and can you run your lower control arms plus lowered spindles

  • @reyeshernandez486
    @reyeshernandez486 3 роки тому +2

    tire size ?

  • @deadstockgaming5782
    @deadstockgaming5782 4 роки тому +1

    Do y’all do anything besides suspension work? Like maybe sunroof installs? Motor installs? I think that’ll help expand the channel

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому

      Nope. Just suspension. Thats our specialty but we can possibly add some other thing. Will have to see. Thanks for your feedback.

  • @bernieVI
    @bernieVI 4 роки тому

    Yes that would a good video the difference between drop spindle, springs, and control arm...

  • @ivanbarajas5471
    @ivanbarajas5471 4 роки тому +2

    What happed to the 2014 body drop?

  • @artart7943
    @artart7943 4 роки тому +1

    @reklez for the front was the bottom control arm all you needed to drop it 3 inches or did you have to use lowering springs aswell? thank you

  • @dlo__3929
    @dlo__3929 4 роки тому

    Have you guys ever lowered a 2nd gen single cab Ram?

  • @chuckz253
    @chuckz253 3 роки тому +1

    Is the C Notch necessary to do a 3/5 drop? I really don't want to mess with the frame.

    • @joeroe2839
      @joeroe2839 2 роки тому

      No not really I like to use belltech foam bump stops just incase u do bottom out its soft and or air shocks w it too and rides smooth

  • @dwaynedavis2721
    @dwaynedavis2721 4 роки тому +1

    Have you done 2500 HD slammed....Got 2016 2500 HD in 08 GMC denali not sure which one to do...lol

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому

      Haven't done anything for a 2500. However we are dropping a Chevy 3500 dually to a 6/8 drop. Might do a video on that.

  • @naranjoceidy
    @naranjoceidy 3 роки тому

    Did you had to cut under the bed for the c notch? Can you provide the part numbers you used for the rear and front?

  • @1slowrider
    @1slowrider 4 роки тому

    Can I run after market JDM control arms instead of the stock control arms for the 88-98 Chevy 1500 coil over conversion ?

  • @garystevens1044
    @garystevens1044 4 роки тому

    Wow alot of new guys getting into the lowered truck scene. Well let me loan my time here....
    1. Control arms upper n lower , if your driving and hit a bump and your steering wheel shakes best way to resolve the issueos to get the upper n lower control arms. Also now if your bagging amd not stagic dropping your truck you can find ones with the bag cups for thr airbags..
    2. Springs help maintain the alignment as well as a comfortable ride as well as allowing the truck ro drop in the front to the height of the size spring you order
    3 spindle. Is another way to allow you to lower the front end if you have lowered your vehicle but not bu spindle and when you turn you may occasionaly feel something rubbing or a pop when you turn sharp its because the wheel isnt maintaining the proper anglation whenhou turn the spindle helps this issue..
    4 so if you get the 3 inch lowering springs and 2 inch spindles you may also get the 2 inch drop control arms which maintains a ride idena caddilac and sticks you sown at 7 inches this is when guys usually pull the shock and go airbag so they ca raise it and lower it to accomodate the situation..
    Stay tuned for part 2 the rear end...!and part 3 well talk about the wven more extreme body drop!!! Yea yes laying frame and shooting sparks and freeway line dividers become shooting pucks!! 🤣😂 stay tuned into REKLEZ!!!

  • @XSJSUR3XO3
    @XSJSUR3XO3 4 роки тому +1

    Can I lower my 92 obs 1 more inch after installing the 4in drop kit in the rear? Without c-notch

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому +1

      No, you will need a cnotch for 5" rear drop.

    • @XSJSUR3XO3
      @XSJSUR3XO3 4 роки тому +1

      Ok thanks. I really don't want to notch it but might have too

  • @mattcrowley3075
    @mattcrowley3075 4 роки тому

    I have a 98 s10. Would you have a kit and video to do 2 inch in the front and 3 inch in the rear?

  • @nickovaldo2891
    @nickovaldo2891 Рік тому

    What size were the wheels?

  • @jaxjax5322
    @jaxjax5322 4 роки тому

    How much inches is from the chasis cabin too the floor in that drop?

  • @rolandomota8140
    @rolandomota8140 10 місяців тому

    How much do the parts cost for something like this?

  • @naranjoceidy
    @naranjoceidy 3 роки тому

    What are the parts and brands you used for the rear?

  • @emmanuelgarcia8951
    @emmanuelgarcia8951 4 роки тому +1

    Do you have to notch it with 5” in the back?

  • @bradymorrison4412
    @bradymorrison4412 3 роки тому

    Hey have a question would 3 inch springs and c notch with 1 inch lift shackle for a 3/5

  • @LTXLUIS.
    @LTXLUIS. 4 роки тому

    What kind of lift shackle did you put?

  • @chevy383jt
    @chevy383jt Рік тому

    I don't suppose that you know what size tires it had?

  • @fourdegrees_
    @fourdegrees_ 4 роки тому

    I want to do a 4-6 drop on my 19' Tahoe. Thanks for the video!

  • @mayito2651
    @mayito2651 4 роки тому

    Did you have to use shock extenders

  • @michaelrriscoll2631
    @michaelrriscoll2631 4 роки тому +1

    I would love to see this setup on a rwd tahoe..

  • @CesarGonzalez-op2qo
    @CesarGonzalez-op2qo 3 роки тому

    If on your page I want to buy 2 shock absorbers, do I have to put 1 or 2 in the quantity part?

  • @frankdatank7751
    @frankdatank7751 4 роки тому

    Hows the pinion angle with the flip kit and lift shacles

  • @Felipe_rascon
    @Felipe_rascon 4 роки тому

    i have a 2015 gmc sierra on a 5/7 djm drop , what would be the price for a full accuair system to lay frame

  • @vincentpryor5455
    @vincentpryor5455 4 роки тому

    Would you recommended running drop spindles with the DJM upper and lower control arms? I'm currently lowering my 98 extended cab but the front is not low enough for me. Running 20 inch wheels and DJM'S 4/6 drop kit.

  • @extendomigs
    @extendomigs 4 роки тому

    Do you need to change front shocks for a 4” drop on 99-06 silverado single cab?

  • @chevyxrz
    @chevyxrz 7 місяців тому

    Maybe you can help me out currently have a 2/4 drop on my truck right now 2 inch spindles and shackles and hangers in the back but i want to lower one more inch in the front and one inch in the back any suggestions

  • @naranjoceidy
    @naranjoceidy 3 роки тому

    Can you provide me with the part numbers you used for the rear?

  • @garystevens1044
    @garystevens1044 4 роки тому

    Hey you guys should do a video to explain the difference of static and bagged..... give the newcomers some pros and cons of doing ge two..

  • @deejayanthony6121
    @deejayanthony6121 4 роки тому

    3/5 there a way to not c notch it?

  • @chekezhurtado7025
    @chekezhurtado7025 4 роки тому

    What size shocks I need for rear 3/5 drop??

  • @freshG214
    @freshG214 4 роки тому

    which lift shackle did you guys use for this install??

  • @Itzenzo735
    @Itzenzo735 4 роки тому

    2/4 drop spindle for an 8 lug Silverado c2500 I believe what do you recommend?

  • @Livemusic1800
    @Livemusic1800 3 роки тому

    Where are you guys located ???

  • @MoonlitManiac
    @MoonlitManiac 4 роки тому

    Theres no link for the lower control arms?

  • @erasmohernandez6493
    @erasmohernandez6493 4 роки тому

    hello, what's the name of the front part that holds the spring and the shock absorber the bottom part

  • @superc4308
    @superc4308 4 роки тому +2

    Do you guyz sell your products on Amazon?

  • @mayito2651
    @mayito2651 4 роки тому

    We’re shock extenders used?

  • @alexmora6670
    @alexmora6670 4 роки тому

    The rear shocks are belltech street performance, what is the number for those or is there just one size for my application which is a 97 Silverado I have a 5" in the rear too. . . thanks

    • @eddiegarcia8242
      @eddiegarcia8242 2 роки тому

      Did they ever tell you what shocks to use for 5inch flip kit

  • @yarelyvela5759
    @yarelyvela5759 4 роки тому

    Do you know the size of tire on those 15s im running 15x8 front 15x10 rears and am going 295 50 and 245 60 with are at 26.5 or so in full height

  • @naranjoceidy
    @naranjoceidy 3 роки тому

    Did you had to cut the bed?

  • @Zelaznogsiul-63
    @Zelaznogsiul-63 4 роки тому

    How much is it with labor included? Great video.

  • @soniac6733
    @soniac6733 4 роки тому +1

    Hello I want to purchase the 4/7 kit I have a 2017 Silverado single cab 2wd my question is will I be ok running 26x9/26x12 thanks

  • @ernestwilson4897
    @ernestwilson4897 2 роки тому

    How much does this set up run$$ ??

  • @ReklezSuspensionWorks
    @ReklezSuspensionWorks  4 роки тому

    Thank You All For Watching And The Feedback. We Will Do Our Best To Answer Your Questions On A Video. If Needing Parts Shop Our Online Store At www.reklez.com

    • @themrbrown510
      @themrbrown510 4 роки тому +2

      it would be nice if next time you include the tire size is that a 255/60r15?

  • @LC-sr9jf
    @LC-sr9jf 4 роки тому +1

    How much ?
    For 95 Chevy Silverado extended cab
    4/6 drop?

  • @staglefty
    @staglefty 4 роки тому +1

    Can you do a 5&7 drop on a 2019 or 2020 Chevy.

  • @64xSaldanax
    @64xSaldanax 4 роки тому

    Curious if you got a bag kit for 88-98 obs or content on it? Always top notch work from you guys!

  • @diegoo27
    @diegoo27 4 роки тому

    I have a 94 GMC Sierra but it’s a 4x4, do I buy a kit for a 2wd or is there a 4x4 drop kit I can get

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому

      You need to get a 4x4 drop kit. I believe it is just keys, flip kit, c notch and rear shocks.

  • @sidneybegnaud5630
    @sidneybegnaud5630 4 роки тому

    Did the rims rip on anything being 15” rims

    • @themrbrown510
      @themrbrown510 4 роки тому

      no they dont specially with lowering control arms you will be fine.if he would have used spindles you need to trim the lower control arms with 15s

  • @HuizachiiCity1
    @HuizachiiCity1 4 роки тому

    How low can i go on these without a c-notch ?

  • @HuizachiiCity1
    @HuizachiiCity1 4 роки тому

    Here from OnDGas 🔥

  • @salvadorestrada7097
    @salvadorestrada7097 4 роки тому

    Hello bud I recently did a 3/5 drop on my 91 with no c notch I have 235/75/15 and well I'm sitting on my bump stops in the rear. Would the perch have anything to do with how low it dropped. I'm talking about the thing you point at on min 4:06. Id like to come up about 1.5". Thanks, hope to hear back

  • @josezamaniego13
    @josezamaniego13 3 роки тому

    How can I fix the rubbing on my lower control arm I currently have a 2” drop spindles and 2” springs ?
    Can anyone help thanks

    • @AshTookUrCash
      @AshTookUrCash 3 роки тому

      take a disc grinder to it and should be fine. spindles usually have that problem

    • @josezamaniego13
      @josezamaniego13 3 роки тому

      Just grind the lower control arm where it’s rubbing and it should be fine I don’t need to do anything else or change parts ?
      Thanks for the help

  • @arnulforamirez9354
    @arnulforamirez9354 4 роки тому

    How much would a drop like this cost?

  • @markgonzalez3423
    @markgonzalez3423 4 роки тому

    Do any 99-06 4x4silverado 4/6 or 5/7 drops

  • @RichardTheGreat210
    @RichardTheGreat210 2 роки тому

    Was hoping I can do a 3/5 without a notch.

  • @jimmyramirez8844
    @jimmyramirez8844 4 роки тому

    Price for kit on 1995 Chevy Silverado stepside

  • @robertcarlos78
    @robertcarlos78 3 роки тому

    How much did the customer payed for that drop on the truck?

  • @jameshall4906
    @jameshall4906 2 роки тому

    spindles and springs please

  • @jessim1956
    @jessim1956 4 роки тому +1

    How can I do a 4&6 drop on k1500

  • @Yankees454ss
    @Yankees454ss 3 роки тому

    Donde puedo comprar un kit

  • @Tito-fq7jm
    @Tito-fq7jm 4 роки тому +1

    As un bideo de como asen las firewalls en una silverado 2010

    • @ReklezSuspensionWorks
      @ReklezSuspensionWorks  4 роки тому

      Video no puedo hacer porque causa problemas para nosotros. Pero cuando compras el kit te podemos mandar instruciones bien detalladas.

    • @Tito-fq7jm
      @Tito-fq7jm 4 роки тому

      @@ReklezSuspensionWorks quiero mandarte una foto y me digas en cuanto sale un drop asi como la troca dela foto pero nose si podrias brindarme algun numero para mandartela

  • @davidcavazos4987
    @davidcavazos4987 4 роки тому

    All information would be great. Thanks

  • @eligarza2435
    @eligarza2435 4 роки тому

    What rims

  • @ericgrayson6980
    @ericgrayson6980 3 роки тому

    Yes show the video

  • @SuperFord66
    @SuperFord66 4 роки тому

    WhAt size of tire