Here are the #ᴬᴰlinks to newer systems similar to what we purchased in 2019 as shown in this video: 1. amzn.to/45AJjjK | 【Expandable 8CH,2K】 Hiseeu 3MP WiFi Security Camera System Outdoor/Indoor, 4pcs Pan 180°View Cameras, 2-Way Audio, WiFi 8CH 5MP NVR System, Night Vision, Home WiFi Surveillance Cameras, 1TB Hard Drive 2. amzn.to/45m2oGS | [Person Vehicle Detection] Hiseeu 4K PoE Security Camera System, 8 Ports 16CH PoE NVR with 4Pcs 5MP IP Security Camera for Outdoor, Waterproof, Smart Detection/Playback, 1TB HDD, Home Surveillance Kits 3. amzn.to/3E72BSr | SOVMIKU Wireless Security Camera System【2K Human Detection】PTZ Pan/Tilt 3MP Outdoor Camera, 360° View, Auto Tracking, 2 Way Audio, Color Night Vision, Siren Alarm 8Ch Expandable, Alexa, 24/7 Record, 2.4G WiFi 4. amzn.to/3PaRApa | REOLINK 12MP Security Camera System Commercial, 8pcs H.265 12MP PoE Security Cameras Wired Outdoor, Person Vehicle Pet Detection, Spotlight Color Night Vision, 16CH NVR 4TB HDD, RLK16-1200B8-A 5. amzn.to/3qBiX2x | (5.5MP & PIR Detection), Dual Antennas Security Camera System 3K 5.0MP 1944P Wireless Surveillance Monitor NVR Kits with 4TB Hard Drive, 2-Way Audio, 8Pcs Outdoor WiFi Or Click on Amazon link here and search for what you need: amzn.to/3xIOsqg
I have been looking for this information for about 6 months now. I want to change/update my NVR but keep the cameras I have. The one issue I WAS going to have was adding the original cameras to the new NVR. You've solved that problem now! And all explained in a way that novices like me can understand. Well done and many many thanks.
Except this camera system sucks. Good luck to the kid unless it’s him or his family member that created it because 3 screens, 12 cameras and 4 HD’s later none of them work
Hi! I need help and you're the only one I found knowledgeble enough 😊 if you already installed the cameras around a building persay, does that mean I have to take then down and connect them with the ethernet cable to the dvr? Kindly thank your for your help
Unfortunately that is the easiest way to resolve any connection issues. You can try pressing the reset button or cold start on/off unplug first. Sometimes unplugging wire works. Shouldn't take more than a few minutes to uscrew and take down.
So I have a question. When I installed mine all 4 cameras went to 5,6 7,8. How can I change them to 1,2,3,4??? ANd I just ordered a second system for another house and I only hot 1 out of 4 cameras to pair. None of the other will. How can I pair them??? When I installed my first system they all paired automatic. This time it didnt
big thanks to you .........i watched this video and from having 3 cameras just go down for no reason they now all work again from watching this video for some unknown reason they were no longer being picked up via wifi and now they do .....my system is a floureon 4 cameras and the self contained hd screen and hardrive system.
Hello, awesome video (yes I know its 4 years old, but....). Is it possible to link 2 base units (where the harddrive is installed) into one system? I have a base unit from an older setup which I upgraded, but now I want to add a base unit to see if I can extend the wifi range to a couple of cameras needed in backyard. Hope this makes sense. Thank you!
Thanks heaps for this, I have a different brand of NVR and the instruction manual really doesn't cover how to do what is a core function that every owner should know. Your video solved a huge problem that I had.
How do I re add all of my 8 wireless cameras to my nvr without using ethernet cable or placing them next to the nvr box as all 8 of my cameras are installed 15 feet up on my house roof so taking them all down is not an option ? Thanks
Thank you so much. I have added 2 extra and some how I didn't do this and the dvr found them. I went to add another No such luck. I'm trying this tomorrow
I have an onvif IP wifi cameras Nvr kit, which uses this same system as this tutorial. So, I bought another camera with onvif protocol, as I do the replacement in this Nvr system.
Hi my friend,wondered if you can help me,as i have a Hiseeu nvr which is set up on my home TV but im wanting to also watch it on my chromebook os,can you help me with it please.Many thanks,Paul.
Is there any way to change some of the cameras wifi to a different Wi-Fi? Or do they all have to be on the same one? I have the same system with 8 cameras but two of the cameras won’t pick up the signal that’s connected to the box
I have Fyuui 8 camera NVR system just like yours almost. I have 4 cameras that came with it. I am trying to add a 5th Fyuui 350 degree camera to this system and it wont let me. I went thru the steps just like you did and no camera shows up?? It is almost the same as you have except where you hit refresh,,mine says search. all the rest is the same. I have it direct wired in just like you. Any ideas?
Hello o have question I have same camera like u have I got anything set up but I don’t know how to turn on or off the recording Idk how to turn on can u able help me out thank you .
I've purchased a business with the Smonet all in one NVR/TV with 8 cameras and the previous owner does not remember their user id or password. Can someone help with how I can delete old settings and start anew?? I can view while at business, but want the capabilities to view via phone when away.
Hey there, I've got anran cameras. I can see the picture in the preview boxes. But on the main screen, it says encode not support. And there is no picture. Do you know what the problem is? I've messaged the company, and they can't even tell me what the problem is. It seems like the person I was talking to couldn't even tell me what encode not support means. Im trying to connect it to the dvr
Hi... I have at the same sistem NVR, but actually have an error in the registry and I can't see the old video. Now I can see only a live video... do you have an idea for the problem? Thank you
Great video thanks for the overview, and the heads up on the direct from China brand. Fantastic to see you are into so many topics. Keep up the great work in learning as it's incredibly helpful to your studies and career later to have a wide knowledge base to draw from.
I just bought a Hiseeu all-in-one unit and I could really use this young man to show me what in the hell to do...I'm lost! Ok, I have all the cables but after I plug my HDMI cable into the monitor what do I plug the OTHER end into? The camera's work great. I tested them and they plug right into the monitor but how do I get the HD to work? Do I have to plug it into my computer router? I'm really lost..and I'm old LOL
@JASON VOORHEES Hey Jason, that's very nice of you. Thanks so much. Yes, they are up and running. I actually just got the last one positioned yesterday. I have to get a longer ethernet cable but it all looks great. Thanks again brother!
@JASON VOORHEES Cool..you'll love them. I just was up on the ladder doing a little repositioning. I think I got everything covered. Good luck Jason..the high-definition in these cameras are awesome...they've come a long way.
@JASON VOORHEES There's a lot of "little things" that go into getting these cameras ready as I found out. I used conduit where ever I had exposed wired. The wire-plug that goes to the camera is about 8 ft long. One end, that goes into the camera kinda looks like the end you'd plug into a speaker and the other is a 1x3" block-plug that goes into the outlet. I had to do a LOT of "ground work" to get them up and running. I also had to install an outdoor outlet just to plug one of the damn things in LOL. Let me know how it all works out.
@JASON VOORHEES I think once you get it set up outside it 'll look better. Mine is an "all-in-one" set up. It comes with a monitor which is HD. The main push about these cameras are 24 internet recording so once you get it set up with your router and onto your phone it should look better! I paid close to $400 for this set-up. It came with 4 waterproof cameras and a nice monitor. Keep in touch!
Hi, 3 of my 4 cameras have been blocked wirelessly, testing them with the utp cable if they work. I have a K-820 NVR, and plug and play cameras. What should I do?
Did u figure this out ? Because all of a sudden one of cameras won’t show even when I add it back . It only shows when plugged in directly not wirelessly. WiFi add only shows 3 and never finds the 4th….
Could you give advice on how to add an ONVIF IP camera to any ONVIF enabled XVR ? Struggling to find software that actually will change an IP address to avoid Ip conflict in the XVR.
Hello friend, I have a failure in a system similar to that and the thing is that I have the cameras with network cables, they are configured well but if the power goes out suddenly some of them no longer appear. If you have a method, please.
My PTZ Hiseeu camera stopped monitoring/ tracking people or movements. I’ve tried resetting them no luck . I can manually rotate them . They use to follow a humanoid’s movement.
Hi I’m having a problem I have ZOSI system I’m able to backup but when I try playing the video on my Mac it says file not supported the file says AVI then when I tried with windows it said file encoded ? How can I play it ?
I mate. Thanks for the video. I just got my cctv camera (VICTURE PC750 wireless security camera). Please advice, will this work with ONVIF WiFi NVR. Thanks
Can you do a video explain or showing your record plan ..... because after 15 days I cant see the records anymore, i check the disk and it was full ..... then I change the disk and now i steel cant see the new records
I saw an answer on Amazon that said you can connect Zosi cameras along with other brand-name cameras to the hiseeu system. Is this possible? And if so how do you do it?
If you do not have a refresh button, like mine does not, then hit the "match code" button and your camera should tell you it is in the wireless setup or something to that effect. When the camera is finished connecting, it will tell you, connection complete or something to that effect. You should then see your new camera displayed on the monitor.
I would like to know if you can help me how to update this system, as there are some cameras that report that being in conflict with the channel and the system is the same as that of your explanation.
I added a fith camera to my Hissuee NVR and now a get the "Poor Signal" Error adn no video is shown, even so the camera lies next to the NVR!! Any ideas?
So thats the easy way if you have that UI. How can I set up my ONVIF camera to an NVR with a different UI that does not have matching? I have ANNKE DW81KD & a Wanview W6 camera. I have no IP address for the camera so cannot install it. Many thanks.
Buddy, please help me, I got everything connected in the right way, the motion detection is working, however when I get a notification to my phone for a motion detection, I can’t play the 10 seconds videos on my phone !! Why is that ?? When I try to play it keep saying loading and nothing comes up. Please I need your help
Hi, I successfully added 6 IP wireless camera but the 7th and 8th are not working after I disconnect it from ethernet it appears can't get a wifi signal
Not sure if this is what you mean, but you can adjust which box the cameras appear in by right clicking on the normal screen (with all the cameras) and clicking "Adjust Channel" and dragging the cameras to the box you want them to appear to! Cheers!
(00:53) Unfortunately, there are different versions of ONVIF and merely because both devices are labeled as "ONVIF" is not a 100% guarantee they will work together, especially if from different base manufacturers. OR One may see some feature(s) work fine (e.g. video is displayed), while other feature(s) may not work properly (e.g. Pan & Tilt, 2-way audio, alarm features, etc) One may also run into compression codec incompatibility issues. One may also have a camera that requires bandwidth that is too high for a particular NVR/DVR (e.g. one may have an NVR capable of handling only up to 8x 3MP cameras but the camera(s) one is trying to add may be 5MP or higher, AND...the NVR may be able to only handle a certain value of combined bandwidth consumed by all the cameras connected. Under such constraints trying to add more cameras OR even a single higher resolution camera may cause issues. If one is unaware of these constraints then debugging problems can get complicated.
I have one TZ-HB0312 camera and I want to connect it to my home network router. I did not find how to connect this camera with PC (Win 7) I want to watch the camera image on a networked computers.Can you help me?
pudiste solucionarlo? o buscaste la contraseña? tengo el mismo problema, ya puse varias contraseñas comunes, pero no funciona, la app EseeCloud, le asigno una contraseña y no se cual es
Hi nice Channel. I got a Problem with my NVR. Evelyn week, je looses it‘s internal Wifi Settings. After 2 times cut off AC the Settings are back. Couleur you please help me? Greetings from Germany. Bye Daniel.
Hi, I have a similar system, and it has terrible wireless signal, please can I hardwire successful and bypass the wireless default settings, and how, if yes? Thanks, I’ll appreciate response from anyone who can help.
Hello. I am looking for a way to connect all my WiFi home security cameras( all are different brands unfortunately) from one app. Is that possible? Any help would be greatly appreciated.
My cameras are 1) Wansview 1) HapSee 1) CloudEdge 1) genni The reason I have a variety of different brand of cameras is due to price and availability. I found from auctions, flea markets etc. any help? please? thanks
Hey i have that nvr n those cameras but i order 2 more cameras n tried to connect them but they dont shop up in the video manage no ip nothing! If you know whats wrong help me
How do you pair the camera without the wire? My cameras are already installed, and for some reason keep disconnecting, so I have to delete them and them back.
Here are the #ᴬᴰlinks to newer systems similar to what we purchased in 2019 as shown in this video:
1. amzn.to/45AJjjK | 【Expandable 8CH,2K】 Hiseeu 3MP WiFi Security Camera System Outdoor/Indoor, 4pcs Pan 180°View Cameras, 2-Way Audio, WiFi 8CH 5MP NVR System, Night Vision, Home WiFi Surveillance Cameras, 1TB Hard Drive
2. amzn.to/45m2oGS | [Person Vehicle Detection] Hiseeu 4K PoE Security Camera System, 8 Ports 16CH PoE NVR with 4Pcs 5MP IP Security Camera for Outdoor, Waterproof, Smart Detection/Playback, 1TB HDD, Home Surveillance Kits
3. amzn.to/3E72BSr | SOVMIKU Wireless Security Camera System【2K Human Detection】PTZ Pan/Tilt 3MP Outdoor Camera, 360° View, Auto Tracking, 2 Way Audio, Color Night Vision, Siren Alarm 8Ch Expandable, Alexa, 24/7 Record, 2.4G WiFi
4. amzn.to/3PaRApa | REOLINK 12MP Security Camera System Commercial, 8pcs H.265 12MP PoE Security Cameras Wired Outdoor, Person Vehicle Pet Detection, Spotlight Color Night Vision, 16CH NVR 4TB HDD, RLK16-1200B8-A
5. amzn.to/3qBiX2x | (5.5MP & PIR Detection), Dual Antennas Security Camera System 3K 5.0MP 1944P Wireless Surveillance Monitor NVR Kits with 4TB Hard Drive, 2-Way Audio, 8Pcs Outdoor WiFi
Or Click on Amazon link here and search for what you need: amzn.to/3xIOsqg
I have been looking for this information for about 6 months now. I want to change/update my NVR but keep the cameras I have. The one issue I WAS going to have was adding the original cameras to the new NVR. You've solved that problem now! And all explained in a way that novices like me can understand. Well done and many many thanks.
This kid is definitely going to go places in life. Great job on the video. ALWAYS keep learning.
Except this camera system sucks. Good luck to the kid unless it’s him or his family member that created it because 3 screens, 12 cameras and 4 HD’s later none of them work
@@TreyM1609 Hi are you serious about these cameras i was going to buy from Amazon. Please let me no if you have time Thanks.
@@ganeshnarayan5505 absolutely. I received 3 separate sets and none were able to record and 1 box didn’t even come with everything.
@@TreyM1609 THANKS.
Hi! I need help and you're the only one I found knowledgeble enough 😊 if you already installed the cameras around a building persay, does that mean I have to take then down and connect them with the ethernet cable to the dvr? Kindly thank your for your help
Unfortunately that is the easiest way to resolve any connection issues. You can try pressing the reset button or cold start on/off unplug first. Sometimes unplugging wire works. Shouldn't take more than a few minutes to uscrew and take down.
@@EyeOnAiman Thank you 🙏
Hi Aiman, absolutely brilliant, I was stuck on this for an hour till I found your video. Many grateful thx from the United Kingdon
Very cute kid offering very good advise. Need video on how to connect to home wifi when following the instruction manual doesn't work for it!!!
Buenas tardes, puedo emparejar camaraa denotras marcar al NVR HISEEU?
Mediante el protocolo ONVIF?
So I have a question. When I installed mine all 4 cameras went to 5,6 7,8. How can I change them to 1,2,3,4??? ANd I just ordered a second system for another house and I only hot 1 out of 4 cameras to pair. None of the other will. How can I pair them??? When I installed my first system they all paired automatic. This time it didnt
big thanks to you .........i watched this video and from having 3 cameras just go down for no reason they now all work again from watching this video for some unknown reason they were no longer being picked up via wifi and now they do .....my system is a floureon 4 cameras and the self contained hd screen and hardrive system.
Almost reset my whole system till video 👍
Hello, awesome video (yes I know its 4 years old, but....). Is it possible to link 2 base units (where the harddrive is installed) into one system? I have a base unit from an older setup which I upgraded, but now I want to add a base unit to see if I can extend the wifi range to a couple of cameras needed in backyard. Hope this makes sense. Thank you!
Thanks heaps for this, I have a different brand of NVR and the instruction manual really doesn't cover how to do what is a core function that every owner should know. Your video solved a huge problem that I had.
Wayto go little man I'm getting good advice from someone probably a fifth my age good on you
THANK YOU THANK YOU ITS HAS BEEN DRIVING ME MAD
i now have 8 cameras 👍👍👍👍😁 GREAT VIDEO
How do I re add all of my 8 wireless cameras to my nvr without using ethernet cable or placing them next to the nvr box as all 8 of my cameras are installed 15 feet up on my house roof so taking them all down is not an option ? Thanks
Awesome I tired to add the camera through the app on my phone but it kept failing this worked well for me.
Thank you so much.
I have added 2 extra and some how I didn't do this and the dvr found them.
I went to add another
No such luck.
I'm trying this tomorrow
I have an onvif IP wifi cameras Nvr kit, which uses this same system as this tutorial. So, I bought another camera with onvif protocol, as I do the replacement in this Nvr system.
Thank you for an extremely helpful tutoring session
Happy to help!
Your voice seems clear. May I know what mic you're using? And where it's placed?
Hi my friend,wondered if you can help me,as i have a Hiseeu nvr which is set up on my home TV but im wanting to also watch it on my chromebook os,can you help me with it please.Many thanks,Paul.
Great video! I do have a set of cameras without the ethernet port visible - I'm trying to figure out how to sync those as well - any ideas?
Did you figure this out?
Is there any way to change some of the cameras wifi to a different Wi-Fi? Or do they all have to be on the same one? I have the same system with 8 cameras but two of the cameras won’t pick up the signal that’s connected to the box
I have Fyuui 8 camera NVR system just like yours almost. I have 4 cameras that came with it. I am trying to add a 5th Fyuui 350 degree camera to this system and it wont let me.
I went thru the steps just like you did and no camera shows up?? It is almost the same as you have except where you hit refresh,,mine says search. all the rest is the same.
I have it direct wired in just like you. Any ideas?
Been trying for days thank you so much for all your help
Hello o have question I have same camera like u have I got anything set up but I don’t know how to turn on or off the recording Idk how to turn on can u able help me out thank you .
Very informative, now I'm going to attempt to hook up my camera.
i have the same NVR but I don't have the cameras yo have . i do have other IP cam without the rj45 cable jack on it. how do I connect type of cams?
Hi there can you help me as when I have added the new camera it comes up with resolution to big !!help!!!
I've purchased a business with the Smonet all in one NVR/TV with 8 cameras and the previous owner does not remember their user id or password. Can someone help with how I can delete old settings and start anew?? I can view while at business, but want the capabilities to view via phone when away.
Hi.....can that nvr IP Pro connect with camera ptz outdoor
Hey there, I've got anran cameras. I can see the picture in the preview boxes. But on the main screen, it says encode not support. And there is no picture. Do you know what the problem is? I've messaged the company, and they can't even tell me what the problem is. It seems like the person I was talking to couldn't even tell me what encode not support means. Im trying to connect it to the dvr
Do you know if it's possible to hook up hiseeu cameras to a different brand of NVR?
Hi can we add tapo cam in hiseeu nvr ?
Hi... I have at the same sistem NVR, but actually have an error in the registry and I can't see the old video. Now I can see only a live video... do you have an idea for the problem?
Thank you
I have a 3 yr old lorex lnk7108 poe 8ch system costco trying to swap out 2 cams now non lorex am I wasting my time and just need to buy lorex poe
Did you make a video to updating the firmware of your system?
Do you know how to change the time to am/pm
Great video thanks for the overview, and the heads up on the direct from China brand. Fantastic to see you are into so many topics. Keep up the great work in learning as it's incredibly helpful to your studies and career later to have a wide knowledge base to draw from.
I would like to know if you can help me, how do I update this system, as my system is identical to this one fo your tutorial.
I just bought a Hiseeu all-in-one unit and I could really use this young man to show me what in the hell to do...I'm lost! Ok, I have all the cables but after I plug my HDMI cable into the monitor what do I plug the OTHER end into? The camera's work great. I tested them and they plug right into the monitor but how do I get the HD to work? Do I have to plug it into my computer router? I'm really lost..and I'm old LOL
@JASON VOORHEES Hey Jason, that's very nice of you. Thanks so much. Yes, they are up and running. I actually just got the last one positioned yesterday. I have to get a longer ethernet cable but it all looks great. Thanks again brother!
@JASON VOORHEES Cool..you'll love them. I just was up on the ladder doing a little repositioning. I think I got everything covered. Good luck Jason..the high-definition in these cameras are awesome...they've come a long way.
@JASON VOORHEES There's a lot of "little things" that go into getting these cameras ready as I found out. I used conduit where ever I had exposed wired. The wire-plug that goes to the camera is about 8 ft long. One end, that goes into the camera kinda looks like the end you'd plug into a speaker and the other is a 1x3" block-plug that goes into the outlet. I had to do a LOT of "ground work" to get them up and running. I also had to install an outdoor outlet just to plug one of the damn things in LOL. Let me know how it all works out.
@JASON VOORHEES I think once you get it set up outside it 'll look better. Mine is an "all-in-one" set up. It comes with a monitor which is HD. The main push about these cameras are 24 internet recording so once you get it set up with your router and onto your phone it should look better! I paid close to $400 for this set-up. It came with 4 waterproof cameras and a nice monitor. Keep in touch!
@JASON VOORHEES Also Jason, I didn't like mine when I was just testing it inside either. It'll look much clearer when you get it all set up.
Thank you so much for the information! Very informative and definitely helped with adding a new camera! Very helpful!!!!
how do you add another make of camera to your NVR ???
Hi, 3 of my 4 cameras have been blocked wirelessly, testing them with the utp cable if they work. I have a K-820 NVR, and plug and play cameras. What should I do?
Did u figure this out ? Because all of a sudden one of cameras won’t show even when I add it back . It only shows when plugged in directly not wirelessly. WiFi add only shows 3 and never finds the 4th….
Could you give advice on how to add an ONVIF IP camera to any ONVIF enabled XVR ?
Struggling to find software that actually will change an IP address to avoid Ip conflict in the XVR.
I am trying to add this camera to a Bechol NVR it is saying the encode not supported. What do I have to do to add this camera
is there a way to change the internal IP address on the NVR they start with 172.20 but i wanna change it to 192.168
Hi do you know how we can to invers the picture?
Hello friend, I have a failure in a system similar to that and the thing is that I have the cameras with network cables, they are configured well but if the power goes out suddenly some of them no longer appear. If you have a method, please.
Please help how do I get my images to show on Nvr
Do you think we can add a wifi camera from another brand like HeinmVision to the Hiseeu NVR?
hello, good video on the use of this material,
can you tell me how to reverse the image when placing the camera on the ceiling thank you
My PTZ Hiseeu camera stopped monitoring/ tracking people or movements.
I’ve tried resetting them no luck . I can manually rotate them . They use to follow a humanoid’s movement.
I have 4 channel NVR, i am planning to hook up it with 7 cameras with POE splitter. Will the NVR support 7 cameras? Thanks!
How do I change channel numbers? I need to make cam 1 show where cam 2 is located . Any help will be greatly appreciated, and thanks
great informative video. thanks
Hi I’m having a problem I have ZOSI system I’m able to backup but when I try playing the video on my Mac it says file not supported the file says AVI then when I tried with windows it said file encoded ? How can I play it ?
Try viewing using the VLC media player! I hope that helps!
How do I get that blue wire to get it upstairs to put the camera out of my window
I mate. Thanks for the video. I just got my cctv camera (VICTURE PC750 wireless security camera). Please advice, will this work with ONVIF WiFi NVR. Thanks
Thank you very much, I have been looking for this information for so long!
Can you do a video explain or showing your record plan ..... because after 15 days I cant see the records anymore, i check the disk and it was full ..... then I change the disk and now i steel cant see the new records
I saw an answer on Amazon that said you can connect Zosi cameras along with other brand-name cameras to the hiseeu system. Is this possible? And if so how do you do it?
If you do not have a refresh button, like mine does not, then hit the "match code" button and your camera should tell you it is in the wireless setup or something to that effect. When the camera is finished connecting, it will tell you, connection complete or something to that effect. You should then see your new camera displayed on the monitor.
Thanks you are awesome and fixed my problem....thanks for making the video
Good teaching video also have question can u add a ptz to the nvr ur using thanks 😃
I would like to know if you can help me how to update this system, as there are some cameras that report that being in conflict with the channel and the system is the same as that of your explanation.
do you need to have internet to make this system work?
I added a fith camera to my Hissuee NVR and now a get the "Poor Signal" Error adn no video is shown, even so the camera lies next to the NVR!! Any ideas?
thank you so much for making it so easy to follow and understand.
So thats the easy way if you have that UI. How can I set up my ONVIF camera to an NVR with a different UI that does not have matching? I have ANNKE DW81KD & a Wanview W6 camera. I have no IP address for the camera so cannot install it. Many thanks.
thank you very much!. such a simple explanation is a great help!.👍
hi my cameras are turn on my wireless internet connection is successful but i have no video on monitor how do i fix it
Buddy, please help me, I got everything connected in the right way, the motion detection is working, however when I get a notification to my phone for a motion detection, I can’t play the 10 seconds videos on my phone !! Why is that ?? When I try to play it keep saying loading and nothing comes up.
Please I need your help
I follow you from Sénégal ...You do a nice job I appreciate you
Hi, I successfully added 6 IP wireless camera but the 7th and 8th are not working after I disconnect it from ethernet it appears can't get a wifi signal
Please do a video on connecting an extra camera that does Not have ethernet port on camera. Trying to add to the original four cameras
Can i add a diferent brand camera to my nvr sistem? One of my cameras broke and i cant find the same brand
Where’s your video to how to switch channels around? Thanks
Not sure if this is what you mean, but you can adjust which box the cameras appear in by right clicking on the normal screen (with all the cameras) and clicking "Adjust Channel" and dragging the cameras to the box you want them to appear to! Cheers!
Why must I use the 172.20.24.xx network?
(00:53) Unfortunately, there are different versions of ONVIF and merely because both devices are labeled as "ONVIF" is not a 100% guarantee they will work together, especially if from different base manufacturers.
OR
One may see some feature(s) work fine (e.g. video is displayed), while other feature(s) may not work properly (e.g. Pan & Tilt, 2-way audio, alarm features, etc)
One may also run into compression codec incompatibility issues.
One may also have a camera that requires bandwidth that is too high for a particular NVR/DVR (e.g. one may have an NVR capable of handling only up to 8x 3MP cameras but the camera(s) one is trying to add may be 5MP or higher, AND...the NVR may be able to only handle a certain value of combined bandwidth consumed by all the cameras connected. Under such constraints trying to add more cameras OR even a single higher resolution camera may cause issues. If one is unaware of these constraints then debugging problems can get complicated.
Hi. Do you know how far the camera works?
hey mate. how do I reset this system ? mine is behaving strange all of a sudden. thanks
I have one TZ-HB0312 camera and I want to connect it to my home network router.
I did not find how to connect this camera with PC (Win 7)
I want to watch the camera image on a networked computers.Can you help me?
Can i connect this camera to mobilephon via router with out nvr
How to change order of cameras on Monitor ???
My screen show the alarm signal how do I take it off on one channel thanks
Can you help me? Follow step by step but the status say password error
pudiste solucionarlo? o buscaste la contraseña? tengo el mismo problema, ya puse varias contraseñas comunes, pero no funciona, la app EseeCloud, le asigno una contraseña y no se cual es
What can I do if it says "different network segment"?
Hi nice Channel. I got a Problem with my NVR. Evelyn week, je looses it‘s internal Wifi Settings. After 2 times cut off AC the Settings are back. Couleur you please help me? Greetings from Germany. Bye Daniel.
Hi, I have a similar system, and it has terrible wireless signal, please can I hardwire successful and bypass the wireless default settings, and how, if yes? Thanks, I’ll appreciate response from anyone who can help.
Please help my images do show on nvr
Well-done ❤
If the wifi connection is down the onvif will also not work? Pls advise
What if my camera dont have the enthernet connection on it??
I have the same problem as you it would be nice if he would answer some of the questions posted here
Hello. I am looking for a way to connect all my WiFi home security cameras( all are different brands unfortunately) from one app. Is that possible? Any help would be greatly appreciated.
My cameras are
1) Wansview
1) HapSee
1) CloudEdge
1) genni
The reason I have a variety of different brand of cameras is due to price and availability. I found from auctions, flea markets etc. any help? please? thanks
Hey i have that nvr n those cameras but i order 2 more cameras n tried to connect them but they dont shop up in the video manage no ip nothing! If you know whats wrong help me
@omar lopez did you have any luck getting cams to work i have lorex trying to change 2 non lorex without any luck
How do you pair the camera without the wire? My cameras are already installed, and for some reason keep disconnecting, so I have to delete them and them back.
How do you do this with the reset button? Please help
Very knowledgeable thanks for the video
Thank you, it is great to know! 👍👍👍