Hiseeu 4 HD camera system review 4 out 5 stars
Вставка
- Опубліковано 11 гру 2020
- Hiseeu 4 HD camera NVR system review. I give this system 4 out 5 stars so far for ease of setup and stage vs. parts quality / value. Come with everything you to easy installation
It sets up well and is preconfigure for most new users can walk thru step by step. It can go up to 8 IP base cameras (secure) local only WIFI network that work in a close Wi-Fi config. It is using none routable IP scopes and stages well
The only issue that related to the system is the staging of the camera so you know they are working. it is a little hard to check them before staging them for use. Keep enjoying and the learning!
related sites:
www.Hiseeu.com
Enjoy! - Наука та технологія
I purchased the 4 cameras Hiseeu system and found it very easy to set up. The picture quality is excellent and the night time is outstanding. I am very pleased with this system, will comment again in 6 months. PS: I am 85 years old and not computer savvy.
Very cool!
I can't edit this part Pm or Am . just set the time
@@dungnguyencuocsongomy6850 Hmm is it set to 24 hr or 12 display? Mine is 24 hr based
@@leadiususa7394 24h or 12h still wrong Pm or Am
85 years young you mean
Just ordered this system to upgrade my wainsview cameras I bought back in 2029. The ones I had were nice but they were cloud based so you couldn’t go back farther than two days without paying a subscription. This system also allows for remote viewing from an app and also has a subscription option in the app but if you have the main DVR you should be set. This was an extremely easy system to setup and while my dvr had a bad hard drive out of the box I messaged the company and they are sending me a new drive. Thankfully I had a spare laptop 1TB drive I threw in and formatted until the new drive arrives. Only negatives I had were the included mouse was almost worse than useless but I had an extra wireless mouse I threw on it, the only other downside is with my old cameras anytime I got a alert I could delete the clip but from the app and the actual dvr I don’t see that option but notice it’s the same dvr interface I have at my job and I’m thinking it’s probably a security feature that you can’t delete clips without wiping the whole HDD and that makes sense for businesses and stuff
correct
Thank you for the video, very helpful even 2 years later,
only thing I might think about is you could have recorded the password sections with fake ones and just redid them with your actual passwords
Great video. Thank you
Have you used the app for remote viewing? Would you recommend an app for remote view or utilizing the IP address? Also, if you plugged LAN cable, would it power the camera if ran to a switch?
YEs my wife uses the remote monitoring software but you can use a couple of apps to do that if you like. As for the IP cameras are they POE (Power Over Ethernet) ? No they are normal AC power supplies but you could add POE IP camera if you want. It will do up to eight cameras.
@Eddie Brodie Great to hear! Enjoy...
Thank you for the video. Do you still recommend this unit ? Is there an alternative option you'd recommend over this within the price range? Thank you
This is a good system to learn how to own something like this so yes I recommend this system to beginners for their homes. It can scale and simple to deploy if you have a good working kit. There is some worry about how fast support gets back to people but it was not bad for me. I have installed many IP based camera systems and as long as you can secure your cameras and your system, then you are good to with this type of home system.
@@leadiususa7394 Thankyou.
Good day. I know this is an older video but I had a question about something. I purchased this system a few months ago and returned it the next day. I wanted this as I didn't have internet or Wi-Fi and understood this would work without either. It did work however I ran into a resolution problem. No matter what I did the resolution was just not anywhere near 1080. As far as I could tell I put the correct resolution in and applied it or whatever it was I had to do to make sure it stayed at that level but I couldn't get it to be a very clear. Yes I didn't forget to remove the cover off the lens. A family member has the same system and theirs is crystal-clear I've even seen videos and pictures from him but he has Wi-Fi in the house. I'm wondering if the systems built-in Wi-Fi doesn't allow the picture to be as clear as if you had Wi-Fi in the house itself. I also didn't care for the lag between waving my arms in front of the camera and actually seeing them wave on my attached HDMI TV. Ultimately though the lack of good resolution is why I returned it. It was really that bad. I'm not trying to say the system is no good it probably is I just had bad luck with it. Any ideas? Also, I don't recall what frames-per-second were available but I seemed to think it was around 15 FPS. I have another system that has 30 frames per second which gives a very smooth video. Also, did you notice if there was a deactivation selection for the infrared for inside use such as in front of a window? Thanks for your informative video and I appreciate in advance any assistance with my questions.
No I think your issue was that you didn't change the save type to the DVR recording side of things. Make sure you are recording at 1080 level in your player side of things. It may be set to 780 DPI and needs to be raise to 1080 but make sure you have a large HDD to handle the larger recordings. I bet that is your issue. the DVR has it own WiFi outside of your house internet WiFi. The internet WiFi is just for remote access if you want it. You can just hook up an HDMI monitor and mouse and keyboard and it works. Hope this helps some...
@@leadiususa7394 thanks for the quick response. I really felt sure that I had set it correctly. I was thinking of ordering it again and double-checking beforehand with my family member to see where I might have missed it if I did. I'm seriously looking at reolink. Again, thanks for your response. A quick edit, I was speaking to live view not checking any recordings concerning the resolution just live view. Perhaps if I missed something it still had to be corrected on the DVR side even if I was just viewing it live. Thanks.
Did the cameras show up on your monitor as soon as you plugged them in? I bought this and tested one camera before I put it up and it showed up on my monitor but then I mounted it and plugged it in and it wouldn't show up no matter what I did. I haven't done any set up wizard stuff yet, but I'm not sure if that would do the trick. Any suggestions?
No I had to config them to work with the VDR
Thank you for the reply. The sound is the whole reason for me buying this as have to prove noisy neighbours.where do I get the mic based from . I need to get in contact with someone ideally. In the UK here.
Regards Joseph
It has some limit sound recording but you need to add the mic base connection to do it I believe.. Yes it does...
@@leadiususa7394 Tech-support nonexistent cow I cannot read simple emails they don't understand English! Called multiple times never heard from anyone nothing but scam. If you buy the equipment you're just stupid!
how long of power cable do the cameras come with.Good video by the way.
Mine was about 6 feet long but I had to use two 6 ft. ext. cable twice so I had the added length, I got them on Ebay for $1 each...
@@leadiususa7394 thanks
Are all the camera connected with the wifi of the included box or can you connect them to other routers?
The DVR does secured WIFI to the camera but the DVR does have a Cat 5 plug for a local network or router connection
how do I extend the power adapter attached to the camera when my electric point is much further than the length of the power adapter than came in the box?
You can do it two ways. One you can get the end DC connectors peaces and some 12 volt DC wire or buy a pre-made cable. Most Security camera support sites have these cable extenders. THey come in 10, 20, 50 and 100 ft. lengths . Low cost as well. Here is a reference link for you to work with... Enjoy! www.amazon.com/Vanxse%C2%AEcctv-2-1x5-5mm-Extension-Security-Standalone/dp/B00WO9BR20/ref=asc_df_B00WO9BR20/?tag=hyprod-20&linkCode=df0&hvadid=198057875972&hvpos=&hvnetw=g&hvrand=14776360583442302537&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015806&hvtargid=pla-385460849035&psc=1
Is there anyway to connect the cameras to one power outlet or does each camera have to plug into the wall seperately?
Sorry, each camera needs a power hook...
Is there a way to REASSIGN camera numbers? To set which 4 cameras per screen x 2
I am not sure... Good question... I have never tried but I bet the Name ID will let you do just that.
Hello friend, congratulations on the video. How far, with obstacles, did you get without loss of signal?
It about 75 feet on avg. The key thing is that your home may impact the strength of the signal from the camera but you can use a better antenna to boost the signal to address that plus better centralize your DVR so it is better centered between the cameras. Hope that help some...
@@leadiususa7394 it helped a lot!!! congratulations !!!
@@leadiususa7394 what antenna can you get?
@@michaelupsala420 What comes with the camera is ok but you can get a bigger one if needed.
how do I change the option where it records 24/7 instead of only motion detection?
Go to the play record option and change the recording time is what I think it is. I am currently not at the location at this to check but it should be there or the advance options icon. I think...
Hi. I install this system at my office but i have e issue with the sound . You have any advice for what i have to do? Thank you
Hmmm, well what type of issues are you having with sounds? It is cutting out on you or not very strong volume wise? Need a bit more details if possible. Thanks and here to help out where I can.
i have to set up cameras on the outside of my business, and was wondering if you knew the range that these cameras will still work? thank you in advance
These do OK, I have about 100ft to the street and I can make out the type of cars going by. Range is a issue if you need real detail. If you need that go to the 4k or higher end 1080I level cams packages . But it works for my home and cover my yards really well. Hope that helps
you didnt show how to install the cameras, do you need to run cables? or do I need to add outlets next to each camera?
No not really, you only have a power cable to work with, There is no data cable for the camera use WiFi.
Can I use cat5e cable with 5j45 ends to power the cameras instead of the ac power cords thats provided?
Nope. It is power supply connection only. The camera is not POE base.
@@leadiususa7394 thank you
I have 2 questions ? Can you run this without internet.. I live in the country.. no good internet provider. Also at our church we have a swan system with the bnc and power supply ran through the ceiling, I know the bnc won't work.. but will those power supply work ? Don't wanna run a power supply there.thanks
As for will the system without the internet. Yes it will work. You just can't access the system remotely. As for the power supplies. You need to check voltage output and compare them to the wifi camera units. There are about four different possible power supplies for bnc camera do to the age of the system. Hope this help you.
You will fine the voltage output on the power supply momally..normally... I also made extenders for my cameras for I needed an extra 5 ft to reach the placement.
I bought a kit of 4 wireless Hiseeu cameras, I tested them and everything was great.
So I proceeded to install then, however, one of the cameras started to fail:
The image froze and the connection was lost. Now the only thing that the camera does it is turn on the light and make a sound
Any solution?
I already have tried restarting it and nothing
See if you can get it replaced under warranty
hey there im having troubles with setting the cameras passwords can you let me know how you did that please??
Yea, it is a pain to set that up but I recommend that you do it. Get off the default PWs as soon as you can. First fully setup the system as is with the default setup. You have to go thru the N-DVR to setup the internal camera WiFi network to get to the place to change the password of the camera. "That is the painful part." If you are on a 192.168.1.1 network then access might not be easy to do. If you change your local router IP scope to something like 172.1. range then the sub WiFi network access is easier to get to because it also want to use the default IP scope of 192.168.1.0 range. that the hard part. Running the same none routerable scope on top of the same none routerable scope is not good. I change mine and it was easier to do. I hope this help and sorry for the slow response. /:> Enjoy!
I bought the reolink door bell and I got the hiseeu NVR and I was able to detect my doorbell with NVR on onvif protocol BUT i cant get it to display video. is there a way to change the internal wifi ip address?
Sorry that is WEB base JPG style format I think. I am pretty sure that it will not work...
@@leadiususa7394 what is jpg style format? the reolink or the hiseeu nvr?
I have this sistem it was working ok for while but not long ago one the cameras stop connecting to the wifi any idea why? and is any app to connect cellphone?
Check what is between the DVR and the camera. Adjust if you have steel beams or plaster wall that have metal meshes in them. You have to tweak your placement out a bit more. Sorry for the slow response to your questions.
For some reason, I can't get the notification working. The email notification on the base station always fails the test even if I use port 25/TLS or 465/SSL. Also, the audio doesn't work through the camera as I can hear the surroundings but can't talk to anyone through the camera. But I agree the picture quality and night vision is good.
Make sure you setup a pass thru for your SMTP service thru your router. Not all routers / ISP services allow anonymous SMTP traffic to go thru. As for the Mic issue, you may be listen to a different camera while looking at the first one. Power off all cameras but the one want to use. Then set it up like you want it then bring the other cameras back on line.
Although I only had this system for one day it didn't have a microphone only a speaker to listen wherever you mounted the camera. I do know you may have to check the audio enabled on each camera also making sure it's turned up. Some of the systems have both a microphone and a speaker for two-way talk but not all of them. I hope this helps you although you may know this by now.
I thought the external antenna was for a camera that might be far away and not receiving a good signal?
Correct, the wire extended antenna helps with range.
@@leadiususa7394 Tech-support nonexistent cow I cannot read simple emails they don't understand English! Called multiple times never heard from anyone nothing but scam. If you buy the equipment you're just stupid!
If I shut down the NVR will it still record?
Also, still can’t change the individual camera passwords. Every time I change them it says “password error”. Is this normal?
& one camera just doesn’t work. Tried everything and it will just not connect. Reached out to customer service and they sent a link to your video.
Nope, it is a one way pat hfor vieo recording. Sorry. But if you want to mvoe your NVR to anotehr lcoation, You can, the NVR will pick back up once it has wper and if it can still get respection from each camera. As for the Dula PW issue. Remember hat you are in a dual WiFi setup. Your camera run o nthe inside secured wiwfi network while your NVR run on trhe local wifi or cabled network. I was able to chan ge my passwords once and then no more. Not sure what is going on there.
Hey man how do I factory rest these cameras like brand new ??
I am not sure but most of the time it is either a small pin hole button you press in for ten second on the back of the camera or you hold down the power cycle button control for a about 30 seconds. I am not sure for there a few version of the camera but that should work i think.
I just could not get my system to place and or record. System says hard disks hasn’t been properly installed. Can you help me on this issue
Yes, check your advance settings to see if the hard drive shows up and is formatted ready for use. If you don't see a drive. check the HHD cable connections and retest. If it is still acting up, swap the hard drive with a temp drive and retest. You may have an with your hard drive. Hope this helps
@@leadiususa7394 will do thanks
do you need internet connection to make the camera work?
No internet needed just a local network to connect too...
Can any wireless cameras be used with this DVR?
You have to check with the dvr builder on that question. Sorry
Someone said you had to put a card in every camera to record. Is this true? I would think that would be awful to have to climb up to take cards in and out of the cameras. Thank You for your time.
Nope, not needed..
@@leadiususa7394 Thank you so much!
@@valafurby1 Anything to help out!
I just bought this. All four was working then one quit. Any suggestions
Hmm check your power suppl;y maybe. Sometime one goes bad. take a power supply from one of the others and test it. Easy fix.
Do I have to plug in the camera in a power source to use it wirelessly or can I use it with oud plug in it in to a power source
No these camera that come with the kit require a power source. These are not POE cameras but you can get a small power extension cable that can meet your needs up to 300 feet long. I use two "20 ft" cables and six "7 ft." cables and work well for my power needs.
These cameras must be connected to a power adapter unless the camera is solar powered, I have solar camera systems for sale
Why my hiseeu system don't show the alarm at night? But it show it during the day.
Not sure, may need to check your config setup. See if it is turned off based on time frame.
Hola que tal amigo, yo configure las camaras individualmente para unirlos a repetidores wifi (misma red), todas se ven en directo con la app EseeCloud, el NVR reconoce todas las camaras, pero al agregarlos muestra "Error de contraseña" y el detalle, es que, durante la configuracion de las camaras con la app, nunca pidio modificar la contraseña, tu sabras que contraseña se le pudo asignar a las camaras? ya intente con varias contraseñas por defecto, y no logran dar video al NVR. El sistema es el mismo que utilizas en tu video.
Hi can we add more cameras on this NVR
Yes you can. I think it support up to six or maybe eight cameras (Not sure of the max.) but make sure your adjust the hard drive size to handle that many cameras.
@@leadiususa7394 thank you dear I have one more question can we connect wired camera through Poe switch to this NVR
@@rohitrrohit8334 No this is a WIFI only base camera setup and you use the double WIFI base cameras. POE will not work with the camera you can get for this system. It would have been nice but that is also how you save on money by avoid the POE base cameras, Sorry...
Do I need a computer to install the program or can I use a laptop?
Nope. You can just use a hdmi monitor/ TV and the mouse. If you want but yes you can also a PC / notebook as well to remote into it. It is IP based access.
@@leadiususa7394 thank you!
How much distance is covered between nvr and camera
It depends on the home or property. If you have a older house 75 years or older the range will be shorter due to the type of materials use to build the building 50 ft to 75 ft. (Plaster / Mortoring are really not good for this system do to all the metal wire meshing use in the walls. Best to use B-N-C camera DVR solution instead) New or newer homes can get up to 125 ft away or 150 Ft. 360 degrees radius... Hope this help some.
SORRY 4 CAPS, I COULDNT FIND INFO ON THE ESEE CLOUD, IS THERE A FEE FOR USING THIS CLOUD, ALSO I WAS THINKING ABOUT BUYING A HISEEU CAMERA SYSTEM WITH A 3TB HARDRIVE, IF THIS IS THE CASE DO I NEED A CLOUD SERVICE, IM SORRY FOR ASKING SIMPLE QUESTIONS, IM JUST SO LOST WITH THIS SECURITY CAMERA SET UP, THANK YOU.
Well ESEE Cloud software comes with the camera kit to enter act with the system. But (I think) is not really a cloud storage VDR solution. You need something more like Spot Cloud NVR services. get.spot.ai/cloud-nvr-02-c/check-pricing?Cloud_NVR_Broad&Spot+vs.+Cloud&hsa_acc=9506031635&hsa_cam=13456422134&hsa_grp=120740269102&hsa_ad=585623341808&hsa_src=g&hsa_tgt=kwd-295222379986&hsa_kw=cloud%20nvr&hsa_mt=b&hsa_net=adwords&hsa_ver=3&gclid=CjwKCAjw682TBhATEiwA9crl36BJwbwCZY0J07MxqSzRGwxXAmHgHlTV0uQNc1igYiiNkKxHA7bEMxoCN7kQAvD_BwE
As for the 3TB drive Camera system. All of these systems can use 3TB, 4 TB 8TB so if you can give me a kit part number maybe or make and module? That would help me out to answer your question...
And yes you can connect to any NVR cloud solution from your camera system or FTP service as well if you want local data storage. Not easy to setup.... /:>
You did not show how to insert the cameras password. When I try to insert the password ir gives an error. Can you help?
Memory server me right you go to the camera itself and change the password. the CVR should use that password to connect.
Go to the manual section on logging into the camera itself. That should get you were you need to be.
does this need to be connected to the internet or can it be all local too?
Both, just don't connect it to your local network. The camera WiFi will not use your local LAN for access for that is a closed loop between the VTR/VDR and cameras
@@leadiususa7394 thank you so much for the reply. seems very decent then. i currently have xiaomi imilab ec4 cameras and i just hate that they need the APP and an internet connection to work. so stuff from Hiseeu, especially now that i know this, is very tempting.
Mines say no hdd found don’t record any help , or anyone else had this problem
Your hard drive may have failed or became disconnected. You need to power it off and check the connection then power it back up and use the Disk manager to check to see if you show a drive. They run for about three to five years if brand new if you put is a NAS level hard drive. If you just added a basic SATA PC system 5400 RPM base hard drive the life cycle could be less by a 1 to 2 years. I reparable my drives every three years just to be safe and I use NAS or a higher quality server level SATA drives.
How do you talk through the camera
I used my cell phone to do record and my month is close to thephone.
Where did you get that marker
Walmart or hobby lobby
Anyone know why my videos are showing upside down. And all saying connect failed.
That one is a new one. I would drop out the cameras and see if the DVR is causing the issue . By clearing it values up then re-add each camera (one at a time.) back to see if it was just the config of the DVR or something else.
I just returned mine because I couldn't get help with my set up. It's a 1 star for me.
I am sorry to hear that. I do think the response time is slow but they did get back with me and helped me out. Sorry it didn't work out for your needs.
Do I need a computer to used this
No, just a monitor that has a HDMI connection to it. Nor do you need a WiFi local network between the cameras and the DVR for it to work. It has a inside based WiFi built in. But you will need internet connectivity / LAN network if you want to view it outside of your home.
Mine not connected to my iPhone
Make sure you setup your home router to allow the DVR to pass thru it so you can connect to the home IP address to connect to the DVR web URL address. Unless you just want to access ti from inside your home. If so just get the internal IP address of the DVR and connect. If you want to access it from outside your home network, your router needs to be setup to allow the DVR to be reach from outside. Hope this helps
How to fix Ip address error
Hmm can you provide me more info on this errors like the steps and what you are doing?
Does this have an app to monitor or like to see replays
Not sure... I do it access within my home and you can firewall your home network to remote in...
I heard these wireless cameras have low range?
It depends on your home. The age adn type of construction of the house can give you lots of range or very limited range. If you have older home that has plaster walls and wire meshed framing then go with BNC cabling only for no WIFI will work well in such a older home. Next make sure that you first place the main VDR unit in the center or close to center as possible of the house. This give you a balance range to all side of the home. Then you are good to power up the camera and check the range but moving it away from the DVR unit. BTW you can also change the antenna on the camera for a better one for more range / reach. Hope this helps you some! have fun doing this! Enjoy!
@@leadiususa7394 are they battery powered? I can't hardwire anything.
@@mr.hoonigan4313 They are to be plugged into a power source. No batteries sorry. Overall that is best for you don't have to worry about them after they are installed. There are some some source out there for getting extender cables for power and so on.
@@leadiususa7394 so I'm gonna have wires all over the place? Ok well you helped me decide that this is not the one for me and I'll be canceling order
That was not a reset switch on the ones I purchased.
What model number do you have? It may have changed...
It's not infrared if you can see it with your naked eye or non-IR camera
It only does InfraRed at night only and it does flip to black and white mode in the dark. It also has LEDs (InfraRed) to help provide added IR light for night use.
@@leadiususa7394 but if they are glowing red visible to the eye it's not infrared. I'm military and I use night vision nightly for my job. The IR emitter is not visible to the naked eye at all.
@@weaponizedconfusion That is a side effect of the LEDs as I understand it. The lower cost LEDs that is. LOL the LED send out more then just IR, they are cheap so yes you can see both the LEDs and if you touch them over time the heat they give off. Again cheap... Think of it as a water hose that send out lots of EMS water... It still does work....
E descargado el Apple y no me envía código en SMS para conectarme con mi mobil
Can you redo this question in English for me?
Hello
What does Hassan mean?
I am not sure... Wiki time I would say...
How is it holding up?
It is working well so far. How is yours doing? (If you have a set for your use.)
@@leadiususa7394 I haven't ordered them yet. I am thinking about buying this brand or investing more and get better system. My most concern is durability of the external cameras and maybe image quality (reading registration plates in distance 5 - 15m)
@@inevern8027 It is a OK system for covering your doors but that is about it. If you want something more functional this invest more. This is a basically good kit for a simply home like mine. I have place much more capable camera systems for churches and offices but there was a cost. After I look at what I wanted for my home. I tried this setup and it worked for my needs. Know your needs and you will know what you wants. Enjoy! /:>
I think the name is a play on words... Hi-See-U or I-SEE-U, and its a security camera lol.
I agree lol
I just thought of this myself and looked it up to check,
Google says it means "Jesus" in Maori, which used somewhere in New Zeland
why time zone -5
the brands name is clearly I see you. HI see u. lol
lol
I have very bad experience with this set, especially with the connection range
Yes, your building and types of walls can have a impact. I had to adjust my DVR unit to a more centralize location and then I got it to works better. But this Camera system may not work based on the location construction build out. You may have to go with a BNC cabling solution instead and not use WiFi..
@@leadiususa7394 The seller advertised 10-30 m through 1 brick wall or 10-15 m through 2 brick walls, but this is fake
@@igorsh4566 Agreed but there is also the steel screen layer brick walls as well. This type of bricking is coming as well and kills WiFi options. It is the steel mesh that gets grounded most of the time and that sucks... Do you know if you have steel mesh in your home? Also do you plaster verses dry wall in your home?
@@leadiususa7394 No steel mesh, just empty blocks an faced with 1/2 brick, but this camera doesn't work even inside my home from basement to 1st floor!
@@igorsh4566 That is odd. So is your Camera wifi up and running? Take your cameras and place them right beside the DVR / WiFI unit. Then pair them up.. then pull them apart about 20ft. Then check the strength. It may be your DVR is not working for I have mine 190 ft. apart radius wise and I get three bars...
I have heard of the DVR failing and requires replacement but only once or twice so far...
Looks expensive. Need poor man's product reviews
No not really, I got it on Cyber Monday and I got what I needed but a just under $190.00 plus I can free IP camera for my recommendation. I have install many camera system over the years for churches and the BNC 8 or 16 port DVR solution run about $350 to $500 on average. I got this 8 port IP based NVR system to $190.00 But you have to secure the cameras and local WIFI LAN. That is a must!
Generic software.
Generic cameras.
Not generic price.
A common standard is good to work with but I haven't checked the pricing as of late. You could be right. It was priced right when I got it on Amazon. . /:> Enjoy!
Hey man, just keep it simple... You lost me...
Sorry my bad.. I will try harder next time...
I understood almost everything that was said, however, I worked in IT and have am MCSE for Professional, Server, Advanced Server, and DATA Center, am net-tech certified in NT and Novell, and my CompTIA certs. The average you-tuber wouldn’t have a clue and would probably not complete watching this video. Besides, I saw a YT vid from a 14 year old who put on a much more ‘down-to-Earth’ presentation than this one. He even demoed the PTZ cam, motion control and duplex audio. Also, why would anyone want to ‘hack’ or ‘crack’ my video system? I’m not exactly Fort-Knox??!!
Sorry you didn't like my video but there are a lot of people doing just this type of stuff. Enjoy the 12 year oldest video...
Way too much computer geek jargon. Is the goal to show people how to install it and use it or to impress them with your knowledge? People who understand the meaning of all those technical and buzzwords would not need help in the first place. First rule of public speaking...Know your audience.
Sorry, just wanted to put some insight into the product if you want to buy it for your home. My bad...
it’s either he’s too smart or you’re not smart enough
Nothing to so with how ‘smart’ someone is. I understood almost everything that was said, however, I worked in IT and have am MCSE for Professional, Server, Advanced Server, and DATA Center, am net-tech certified in NT and Novell, and my CompTIA certs. The average you-tuber wouldn’t have a clue and would probably not complete watching this video. Besides, I saw a YT vid from a 14 year old who put on a much more ‘down-to-Earth’ presentation than this one. He even demoed the PTZ cam, motion control and duplex audio. Also, why would anyone want to ‘hack’ or ‘crack’ my video system? I’m not exactly Fort-Knox??!!
@@twobrotherskayaking4736 Spot on. Exactly what I wanted to say. I saw the one the kid did as well. I got the 4 cameras up they work fine. I have them running into a tv I use for karaoke. Not a PC. Obviously I am not getting anything to "the cloud". I have verified that it is recording but I don't know how many days it records before it records over. I hope to figure that out and if necessary I will plug it into my PC which is already in the same room. I did not mean to come across as a jerk. But I am a "word man". I can write you a great letter or a love poem or a speech in 10 minutes. I am Not a techie. I can do it but it takes me much longer. It just seemed to me that anyone who understood this man would not need his help. I should have been nicer in saying so.
@@twobrotherskayaking4736 LOL Totally agree dude. You are right. This was meant to be deep dive. I have gotten people that has to little info and others saying to much and so on. I wanted a system for my needs and this talk to that need. My Fort Knox is my family and as a ex-police office and ex-US Army... These days it pays to give detail... Thanks for your input. I will try to do better! /:>