I Tested Viral Tiktok Beer & Chip Holder 🍺
Вставка
- Опубліковано 27 тра 2023
- I Tested Viral Beer & Chip Holder Build
Matt Thompson builds this insane beer and chip holder, I had to try my hand at making my own!
SLOW IS SMOOTH, SMOOTH IS FAST TEE - bit.ly/JM_SSSFTee
FREE PLANS - PLANS - johnmalecki.com/collections/d...
Matt Thompson Woodworks - bit.ly/JM_ThompsonWW
THUNDER LASER - bit.ly/JM_ThunderLaser23
Want to see more wild builds ?
I Tested Viral Animal Carving Table - • I Tested Viral Animal ...
I Tested Pouring Molten Aluminum in Wood - • I Tested Pouring Molte...
I TESTED More Viral Woodworking TikToks - • I TESTED More Viral W...
Proudly Supported By:
Timberland PRO - bit.ly/JM_TimberlandPRO
Oneida Air Systems - bit.ly/JM_Oneida
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishs - bit.ly/JM_Rubio2021
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#Woodworking #Beer #summer - Навчання та стиль
Suggestion: Turn the chip/dip tubs 90° so they're not stretched out so far away from your hand. Then swap the dip and chips around so the lighter of the two is further out. This will place all the weight closer to the pivot make it so the leverage won't cause so much rubbing between the plates. Also, you could rout recesses in the bottom of the snack caddy instead and get rid of the top and end plate entirely. Then you would make the whole contraption lighter AND possibly eliminate the need for a counterweight on the bottom.
On top of all of that, instead of the Popsicle stick, a waxed plastic piece would work wonders as a failsafe I'm pretty sure. Not too sure why they thought of the 3d printed washer for less friction but still put a wood piece on the bottom.
And make the top plate thinner, a 1/4" rather than the 1/2" they ended up with. In the original, it looks like he used 3/8" plywood for everything, which would be light and stiff.
He could also cut the sides on an angle so the wouldn't touch each other or have an extra support bearing on the topside.
Empty beer, chips and dip into a horse feed bag and tilt head back!
Was just going to comment this. But you already did.
One of my favorite things about your channel is that you don’t edit out ALL of the missteps and mistakes. I’m a software engineer and a hobbyist maker myself and it’s so validating to see someone else make mistakes. We all do. However some people prefer to edit those out to appear more perfect than they actually are. Failure is ALWAYS and option.
Agreed! I skip all channels that leave those out....
I dropped my bottle once as a baby, only mistake iv ever made 🤣
Yeah but why did Sam leave, boys?
@@ginger_nosoul I once thought I made a mistake, but I was wrong.
He's actually quite patient when he makes a mistake, or at least they've edited out the bit where he kicks the shit out of some trash cans haha it happens!
You should try using a thrust bearing. I think that might eliminate the play.
Screaming this at the screen from the get go. Lol
Also try switching the order of the chips and dip so the weight is closer to the bearing
Glad I’m not the only one
Came here to say the same thing!
Thank you! Was going nuts on this side of the screen.
So off the back of 30+ years of engineering, I had all kinds of useful and informative suggestions to make the thing work better, but basically now I just want chips and dip, so thanks...
The "play" in the bearing blocks isn't a error. Its so you can compensate for error. Normally you would always use two of these bearing blocks to mount a shaft. next time just use one thrust bearing and sandwich it between two plates. You also dont need two bearings, one bearing in one piece and just a fixed bolt in the other would have worked fine.
I think it could help to move the dip in toward the pivot so that there is less downward pressure on the friction joint. Just a thought.
I had the same idea
Me too!!
Maybe have the dip container next to to bearing. The extra weight of the dip being so far away is making it bind up
I really enjoy this kind of content, I really appreciate you leaving in all of the struggle and the redo attempts.
Dude!
You got me in strife with the Missus. I was supposed to be working on the back deck today, but I got stuck watching your movies...
Maybe build a comfortable Dog Box. I could definitely use that!
Love your movies, mate.
I love the way you figure as you go, it's how I've done some of my best work.
You do much better that I ever could at turning 🙌🏻
Use a thrust bearing in between the two wood structures. That will give you smooth rotation. 👍
Thats what i was thinking the entire video
As others mentioned a thrust bearing would help the swivel action a bunch. Also I wonder if you could eliminate the upper portion of the chip and salsa holder. Add a gusset to support the weight of the chips and salsa on the lower board. The weight of the chips and salsa would act as the counter weight.
You only need the bearing on one side. The bolt on the handle side can be fixed rigid coming out like a stud. Then both of the pillow bearings fitted to the chip side. One either side of the wood. That will give more strength to the pivoting mechanism. If you look at the original video there is no contact between the two pieces other than the bolt. No contact, no friction. You also shouldn't have used the thick wood on the unsupported end as that's just unnecessary ballast, a thin dowel would have be adequate.
Additionally the pivot point should have been in the center of the board.
Love your version better. Bringing the bigger and better. Def a piece that would be talked about in the tailgate. 🎉
I really appreciate how positive and supportive you always are of the other video creators you reference.
Love it! But what I really want is the digital file of the Ron Swanson image I have been lusting over for YEARS!
Line the sides that are rubbing with thin sheets of teflon (you can get those anywhere they sell Heat Transfer Vinyl supplies). That thing will glide like nobody's business.
I love how serious & in depth he went to make this mobile personal bar 😂 * yoda impersonation* clear are the priorities with this one haha
It looks like the pivot point was a little too high in the first one, so when you added the weight(the chips & dip) it just sagged, too much friction so it wouldn't turn freely how it did empty
Add the dip first then the chips because the dip is heavy and is counter weighting the Trey 😊
Do his peanut dispenser next! Love your channel, it's great! Using your knowledge to help build my first river table.
Angle the wood underneath the bearing on either side away from each other so only the bearing area is touching. That would illuminate the rubbing and give room for the play.
So fun! About three quarters way through, I wondered about centering the beer, and having the snack trays hang down lower than the beer. I’ll sleep on that! Awesome work, great vid, thanks to designer and your crew!
I loved this video. All the failures and attempts to make a giant contraption. Amazing. And all for an item that is a solution looking for a problem.
I think you need a thrust bearing in between the two sections. 🙂
Home Improvement/ Tim the Toolman Taylor level of step up.. More Power! Argargargarg!! 😂😂😂
Great stuff!!
“Can’t be an alcoholic if you don’t drink”
This is the mantra I live my life by!
LoL, I laughed so much I pee'd a little, that's twice today. I have been an avid diy'er for over 50 years, the only pearl of wisdom I can pass on is, patience.
The square carbide tool is for roughing. Basically turning the square wood round/knocking the corners off.
The round carbide makes curves (beads and coves) easier and will leave you a better--albeit not great--finish cut. At the end of the day all carbides work by scraping the wood and leads to more tear-out, especially on end grain. Gouges and skews leave a better finish because they can slice or peel the wood grain without tearing.
The second one is so you, glad you made it John sized in the end, great video!!
Southern Tier brewery! Brewed in my backyard
Great video. Seems that the only thing that didn’t give you problem was the wood turning. 😂😂😂
Man. When I watch your channel all I can think sometimes is “MAN it must be nice to have all this raw material just ready to go for whatever you need to do” 😂
Meanwhile I’m over here humming and hawing over whether I can afford a sheet of plywood for a dog house base, much less how to find the time to empty the back of the pickup in order to haul it back home lol
fun project and glorious, over-engineered solution. oh, well done.
absolutely AWESOME!
Gotta love the process
“I think I should reward myself with a 10:45 in the morning beer” 😂 John I love how sarcastic you are with the shit talkers!
Exactly a little over one inch 😂. This project is great and you sir are a Jedi on the lathe😉
You probably could make the small one work with one addition. Cut a slot 2" below the pivot point, where you can mount a bearing horizontally. The bearing just needs to protrude maybe an 1/8". Just enough so when the loaded snack tray flexes the unit, it hits the bearing instead of the other piece of wood. Now it can roll along the outside of the bearing instead of binding.
24:20 - This is a great moment in UA-cam history! Cheers🍻
Two weeks between uploads OMG I cried when this came up. Such a good mf video
I appreciate he didn’t quit, but just fully sent a new one at the end.
Love it man.
great project
A set of thrust bearings and washers between the pieces, as well as on the bolt head and nut would have made this a lot easier I think. Love the vids. Keep it up!
The vacuum and glue trick was pretty legit
Great start to summer! A happy Memorial Day to all of my fellow veterans. H2P!
The Austin Powers clip gets me every time
Use thrust bearings will keep the joint tighter and smoother. Also use a small spacer down the bottom between each part to eliminate the flexing
Turners are the fly fishers of the wood working community 😂
That was awesome! Love the “malecki” style finisher. Just need arms like the hulkster to carry it round. Still awesome though
Appreciate the effort but I loved that you Malecki'd it at the end. 🙌
If you added two inlaid, Teflon rings opposite each other, it may alleviate the rub when the weight is added. The food going on top is countering the weight on the bottom and compounding the pinch. Teflon rings would be easy to manage and slow to wear out.
Genialne! 👍😜
That was so terrible it was amazing! Legend!
A bearing down at the bottom sunk into the wood but sticking out just enough to stop the joint from flexing and making it rub against the bottom of the two peaces would help keep slop off the joint as well as smoothen the motion
I noticed the pivot placement is at the top. So, you might want to have it more to the center for less friction on rotation maybe?
Exactly what I was thinking. Center that bearing and it would work better.
I love that you have a laser but not some of the more common woodworking machines. Made me giggle when you went from “I don’t have anything to turn dowels” to “we have a laser” 8:01
He said "I don't have any dowels so I'm gonna have to turn a handle"
That and I don't have a scroll saw
One thing that might help: put opposing strong magnets in the two parts - the magnetic field might be strong enough to force them apart and eliminate the friction introduced by the weight of the containers.
John is the kinda guy to hold a bud light and skinny pop with pink nails😂😂😂
If you switch the chips and the dip the weight distribution might be better and allow it to rotate on the first handle you made.
Yes. Been lookin for this comment
I love everything you do! At first look I was ready to say, "What a silly project!" Then I watched the process and I have renewed respect. Though I am not a wood-worker, I'm a fiber artist who works from sheep to completed project, so I completely appreciate the incredible amount of behind the scenes planning and work that goes in to what seems like the simplest of things! PS- Hubby totally connected with the comment, "My hand wouldn't fit in here." I completely appreciate you saying, "This is so much harder than I thought!" Hah! to you, Sara, kids, your help-mates, and the guys behind the scenes!
Excelente video!
You could have added curved grooves to both of the plates between the existing bearing, with ball bearings in between the "tracks". This way the bottom parts of the wood below the turn bearing won't cause as much friction due to flex.
Maybe some kind of Teflon coating on the surfaces that have to move might help. Also the bearing being at the top means that the weight of the dip pushed the bottom edges against each other. So perhaps making the gap the same as the width of the bearing and something like Teflon on the surfaces so there's no friction at the bottom.
for starters put the dip on the inside as its the heavy help reliving some strain of the baring preventing the bottom from rubing and the first one might have worked
Leverage my guy. Friend and foe
you could use a set screw to hold the bearing, also nylon washers for low friction!
Think a wider bearing, like for a lazy susan, may have worked better, and of course making it lighter would solve a bunch of issues. That thick heavy wood was the death nail of this project.
You had the right idea of using a bearing, but pillow blocks are not designed for side-loading. Your best bet would have been a pair of skateboard bearings (608zz), and a threaded rod and washers.
[nut, large washer, bearing, 3 washers (large, small, large), bearing, large washer, nut] (using the large washers to hold the bearings in each side of the pivot point)
A torrington bearing in between each half, and it would function super smooth! Probably!
What you could try is the same set up with the bolt, but and spacer. But maybe get a standard cased ball bearing but counter sink it slightly into the wood?
"I love my SS, and no one is allowed how have a different opion than me or i get really upset !!!" I think that dude should have invested in his ejucayshun instead of his SS.
Put the food on the bottom shelf, delete the top shelf. Move the joint as high as possible.
That will save weight.
I like that the response to having spent so much time and experienced so much trouble with the original design was to just overdesign it even further and make a new, even bulkier version from scratch.
might not be the original design, but you could rout a slot at the bottom of the beer part, bore a hole from the bottom and screw in another bearing. I mean orthogonal to the first one, so the chips part rides on a bearing. if that doesn't cancel out the friction problem idk what will xD
I freaking love your videos brother. One love!!!
Omg your awesome increasing the surface area of the bearing will balance the weight distribution of the other side decreasing the drag. Meaning us a bigger bearing
Take a look at "thrust needle roller bearings". One of those between the two blocks will act as a washer but with almost no friction.
The dip is probably heavier than the chips; and it's the weight 'at a distance' that's causing the bottom of the ... contraption? ... to bind. So if you switched the positions of the dip and chips, so that the dip is closer to the pivot point, that will make a difference. Wether it makes enough of a difference depends on too many factors to calculate, but should be an easy thing to test?
You could have put a hole saw in the drill press that is slightly smaller than the diameter of the can. Since you are routing out the edge, this would allow you to sneak up on the snug fit for the can.
I wonder if that first one would have less pinch if you swapped the (heavy) salsa and the chips? Fun build for sure.
The most relatable thing I've ever seen was you looking for your wrench when it was in your hand.
Very simple solution to this. Use a thrust bearing. It will counter rotate the chip side.
I think a thrust bearing would have helped also a few more washers to make the gap bigger so the wood doesn't bind at the bottom
Not sure if anyone pointed this out yet but in the original build you can see the top is canted off from the bottom when the holder sits on a table, but when he lifts it the holder has a pretty even gap. Seems like he put the hole at an angle or has the dip holder slightly higher than the beer holder to create an artificial gap and to remove the pinching issue you are having. Or maybe just a larger gap than one would expect.
OK, that vacuum trick with the glue was epic. Brilliant! worthy of a beer my friend. As for the pinch point where it's rubbing between the two sections- a piece of UHMW tape, maybe 1" wide across the bottom of each should take care of that. I used to be in sales for and Industrial Mfg co and that tape was made for a lot of automotive applications. But I found a lot of applications in woodworking where you needed to eliminate friction points for drawers, moving parts, etc. UHMW- Ultra High Molecular Weight. Think of what Teflon is for hot pans. UHMW is for friction points. Regardless, you made that more practical! loved the crock pot!
Breaking out the vacuum when you can just use string is a bit much. Now if the crack is irregular, I can see the vacuum thing being worth it.
Fun to watch. 😂
Putting a small horizontal wheel in between both moving parts would be weight bearing and take the load off the top bearings allowing for a smooth movement with much less friction. 🥳
30 pounds! HA HA HA. Thank you for the Sunday morning laughs. It's a GREAT reminder why I look forwards to your videos.
turning, this should be fun
One word. Magnets!
I wish I could get Southern Tier here in Missouri. Had their nitro crème brûlée stout and it was life changing
1:05 - someone's getting a C&D letter soon... lol
"I have better tools, but you guys say my work is unapproachable, so I'm going to dumb sh*t down for you knuckleheads, and use a jigsaw."
...Pulls out a $535 Festool jigsaw...
Ayeee southern tier brewing, I went to unclog their toilet a couple months ago lol
A couple of thoughts, you probably only needed 1 bearing to allow the parts to turn, which would reduce the play since the side without a bearing would be able to be locked to stay at 90 degrees. Second is if you put something like a low friction furniture glide below the axle. That would help the wood parts not bind up if the axle gets out of alignment. Last thing is the thing mentioned already, by switching the salsa and chips locations.
Thrust Bearing inbtween the wood attached to the bolt. You need Thrust for smooth Wood.
Love the supersized one with the crock pot 😙👌.
I guess what we learnt here was that you should have "Malecki-fied" it sooner.
You could use to roller scare bearings with a rod or dowel going through them to give you more stability and smoother rotation. 👍👍
That should read roller skate bearings. Bloody pretext. 🤬