I love how you goof your way through the first viral video knowing you could crush it but still go through the pain of being silly to make us smile even if it takes more time. Continues to make the largest “impossible nail through wood” I’ve even seen 😂❤️
Definitely some interesting stuff out there. Steve Ramsey did a video on the captured mail in a board a number of years ago that was dedicated just to that. It was pretty cool. Love your channel and all of the crazy stuff that you do John.
JM I enjoy the fact that not everything is perfect and you sometimes point that out and makes an amatuer feel ok to make mistakes too,,keep it up JM enjoy the videos!
I mean people need to understand some videos and projects take months to make, and in addition to UA-cam you also operate a business making furniture which is more important than the channel. Not for us outsiders to decide how you operate and run your businesses, keep up the good work
What's funny is that the complainers that want projects only are apparently just the vocal minority since project videos consistently have less views. Me personally, I could watch this knucklehead shit all day lol
Ya'll should fo a video build of a custom arcade cabinet for the shop - a nice flush cabinet holding a 55" screen, 4 seater wide with stools, built in joysticks/buttons (ebay/microcenter) and cupholders, recess sound and lighting... that's a woodworking project I want to work my way up to. Love the channel and content!
I've seen the screw puzzle done differently before by gently cracking the end off along the grain so that it fan be glued back with almost no trace, as well. But watching ye squish and reform it with boiling water was pretty impressive, gotta say I didn't expect that!!!
Wood is mostly air. The cells are tubes actually. So you can compress wood then rise it back up with hot water. It you want to see something really crazy watch the video where NileRed makes wood translucent. He bleaches the color out of it. He calls it transparent. That may be too charitable.
The rocker makes me think of those little wood sheet things you pop out and put together to make a flamingo or lion. A giant one of those would be awesome.
At 40 seconds in and to the drop saw. Cut scene Bat sound. I just had to laugh. Yes I am old enough to remember when that sound was first played on TV. Thank you for putting some fun into woodworking.
@@xstonedsnailxbox the bottom of the rocker should be somewhere in front of the seat centre so the chair rocks back when you sit down. But your radius also has the be correct so it actually rocks but doesn't tip over
Hahaha. I love it. Pleased to see that even if I ever graduate to a CNC machine I can still anticipate a life time of sweating and grunting to get two pieces of wood to fit together!!!
Yup. Could also add retractable stoppers to the bottom if you want a regular chair. Maybe alter the shape of the armrest area a bit too for more comfort.
I'm really glad you struggled with the captured nail thing. I watched the Steve Ramsey video years ago and copied it, I ran into literally all the problems you did, its not as easy as it looks! But it got done. Thanks for showing all the mistakes, that's good content
I see that you changed your dust collector since the install video of the new shop. Any chance at getting a new video on the machine and why you changed?
"am i not making something here" YES a cnc is just a tool like a table saw, its still hand made even if you let a computer make cuts for you, let the haters hate cause they dont have one!
CNC is hand made because you do have to touch off the workpiece. Least that's what I tell everyone. There is skill in setting the origin. Unless you have a probe. Then it is debatable. I don't happen to have a touch off probe myself.
Wowers that's crazy. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work John and the gang. Fab On. Weld On. Keep Making. Stay squirrely. God Bless.
To answer your question, yins hasn't built hardly at all in the last few videos, and a lot of us'ns watch hoping to see a project from start to finish to inspire us on our own projects.
was that some Pittsburgheese I heard? (6:27) I think it wassssss Edit: Saw your last video, your content gets buried unless ya do tik toks, but ya i knew it, then saw Bikes and Beards and knew.
Instead of putting a screw into the dowel for the sander, just put the end of the dowel into the drill. I had to do something like that and it worked for me. I'm newish, so is that actually a bad idea? I really don't know.
If anyone questioned how large you are compared to the average human on social media, i think the dude curling up in what looked like an oversized rocker that you then sat in and made it look like a 1/2 scale rocker pretty much says it lol
@@Blake91818 once you've taken work off a CNC machine putting it back to take another cut is not trivial. You need to use a 3D touch probe to get the work aligned again. For something as simple as enlarging slots it isn't really worth doing. Heck you'd have to generate all new G Code too. Or you could just scrap $120 worth of material and cut the job all over again too I suppose. Plywood is pretty expensive these days.
I was hoping to see you show the TikTok of the locked in screw, to see if your way was their way. Also please show more janky TikToks in these videos, and try to upstage them, flex them woodworking muscles.
Sometimes, the reason why you'd need to know how to make the drill sander, is bc you're COMPLETELY out of money, & even credit. So you CAN'T just "go buy the dremmel." Been there, done that. It sucks.
I think the boiling of that comb shaped piece of wood is stupid. Just breaking the wood and gluing it back after inserting the nail or screw would have same effect
Yins didn't do a Roubo build video in 2 minutes... sheesh, cause thats what the internet NEEDS, not like instruction or plans or etc. (Actually another one of those does sound kinda cool) Meh, either way, always fun watching
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Thanks John! Appreciate the shout out! Great job on the chair ⚒️💪
the custom denim gas vent was impressive too! ;)
HOW is this only the 4th comment?! C'mon people, UPVOTE 'till it's practically pinned! X-D
I love how you goof your way through the first viral video knowing you could crush it but still go through the pain of being silly to make us smile even if it takes more time. Continues to make the largest “impossible nail through wood” I’ve even seen 😂❤️
Definitely some interesting stuff out there. Steve Ramsey did a video on the captured mail in a board a number of years ago that was dedicated just to that. It was pretty cool. Love your channel and all of the crazy stuff that you do John.
JM I enjoy the fact that not everything is perfect and you sometimes point that out and makes an amatuer feel ok to make mistakes too,,keep it up JM enjoy the videos!
I mean people need to understand some videos and projects take months to make, and in addition to UA-cam you also operate a business making furniture which is more important than the channel. Not for us outsiders to decide how you operate and run your businesses, keep up the good work
What's funny is that the complainers that want projects only are apparently just the vocal minority since project videos consistently have less views. Me personally, I could watch this knucklehead shit all day lol
@@CeeJayThe13th I am here for the John no matter what is going on
I love when he does this and the pallet videos
Ya'll should fo a video build of a custom arcade cabinet for the shop - a nice flush cabinet holding a 55" screen, 4 seater wide with stools, built in joysticks/buttons (ebay/microcenter) and cupholders, recess sound and lighting... that's a woodworking project I want to work my way up to. Love the channel and content!
Early AM is best time for John. Start the day off right.
I've seen the screw puzzle done differently before by gently cracking the end off along the grain so that it fan be glued back with almost no trace, as well. But watching ye squish and reform it with boiling water was pretty impressive, gotta say I didn't expect that!!!
Wood is mostly air. The cells are tubes actually. So you can compress wood then rise it back up with hot water. It you want to see something really crazy watch the video where NileRed makes wood translucent. He bleaches the color out of it. He calls it transparent. That may be too charitable.
Yep, I was going to say the exact same thing 👍
23 ❤ nice rocker, I created the slip together 1/25 scale balsa wood doll house furniture years ago. Good to see they scaled them for adult size.
9:00 gotta love the gooch air vent on those jeans
Loved the rocker. That would be great for a dorm room: easy to move and not take up a lot of room.
The rocker makes me think of those little wood sheet things you pop out and put together to make a flamingo or lion. A giant one of those would be awesome.
Hell yes! I've been waiting for one of these videos. Best series.
I love the rocking-chair to the end!!
I think, I will do something like that for this summer!! 😁
Thank you very-much!!
Nice BUILD. Excellent vid, as always. Thanks!
Awesome Videos John 👌🏻🦅
At 40 seconds in and to the drop saw. Cut scene Bat sound. I just had to laugh. Yes I am old enough to remember when that sound was first played on TV. Thank you for putting some fun into woodworking.
Rocker geometry is so hard. You can tell at the end it's trying to tip him out the front
Isn't it just place the center of mass behind the center by a smidge
@@xstonedsnailxbox the bottom of the rocker should be somewhere in front of the seat centre so the chair rocks back when you sit down. But your radius also has the be correct so it actually rocks but doesn't tip over
My favourite upload of the week , Can we get an update on where Sam and Jordan went ?
Sam has already started his own UA-cam channel and I believe that Jordan is doing the same thing. Not certain on Jordan but Sam definitely did.
@@unsanctionedchaos2994 can you post his channel so we can maybe watch somebody build something
Sam green is the channel.
Awesome, love these videos. My favorite is the rocker 🔥
Hahaha. I love it. Pleased to see that even if I ever graduate to a CNC machine I can still anticipate a life time of sweating and grunting to get two pieces of wood to fit together!!!
That rocker is legit! I may have to make one, my daughter would love it!
You should drill some holes and drop cup holders into the sides of the chair
I keep hearing Yinz which means you gotta be from Pittsburgh. Instant sub
I have to say i loved how you messed up with a god damn cnc hahaha
make mooooooooore we love it
Rockin roll buddy !!!
Love that rocking chair 😎
Of all, the rocker was the coolest. Great design, Andrew!
That elliptical rocker would be pretty cool if you scaled it up a smidge so you could fit some patio cushions on it.
Yup. Could also add retractable stoppers to the bottom if you want a regular chair. Maybe alter the shape of the armrest area a bit too for more comfort.
Thanks
Excellent work, John! 😊
Stay safe there with your family! 🖖😊
O dear the rollski joke had me dying 🤣
omg watching John flail around is hilarious!
love the batman sound effects
I'm really glad you struggled with the captured nail thing. I watched the Steve Ramsey video years ago and copied it, I ran into literally all the problems you did, its not as easy as it looks! But it got done. Thanks for showing all the mistakes, that's good content
John, with the board you hid the nail on, couldn’t you just cut a plug and then put the plug back in matching the grain and sanding it?
7AM, my day just got better :P
So I guess you need a new pair of jeans there, mate (9:08). Oops. 😊
I can watch hours and hours and hours and hours of these. Might be my favorite content you produce John, keep it up!
lol this sucks baddddd.... if i wanted to see stupid tiktoks, i would be on tiktok.,....
I see that you changed your dust collector since the install video of the new shop. Any chance at getting a new video on the machine and why you changed?
Also saw a Timesaver and huge new planer...
@@nicholasmcneely245 seems like we need to see a new shop update tour!!!!
@7:56 You should have saved that drill/screw/sandpaper gizmo right about there! :)
you are the dohnut media of woodworking i love it
That is a cool chair!
That chair is cool
Love that rocker are there things you can build that don't require nails or screws
Back at it again 😂
"am i not making something here" YES a cnc is just a tool like a table saw, its still hand made even if you let a computer make cuts for you, let the haters hate cause they dont have one!
CNC is hand made because you do have to touch off the workpiece. Least that's what I tell everyone. There is skill in setting the origin. Unless you have a probe. Then it is debatable. I don't happen to have a touch off probe myself.
I think Steve Ramsey did a video on the nail/screw one like a decade ago...could watch how he did it
Wowers that's crazy. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work John and the gang. Fab On. Weld On. Keep Making. Stay squirrely. God Bless.
Just found you brother. I’m basically at day 2 of binge watching your content
Since you can steam wood and make plywood furniture, you should make an Eames style bent plywood chair.
I wanna see John try out some of the jankiest Crafty Panda "hacks" next.
Some foam and cloth on the chair for padding. Then bike tire on the legs. For grip and a wear surface.
Would be really cool to see you make some games. Like a pool table or ski ball, things that you don’t see alot of people making 💁🏻♂️
Pool tables have large thick pieces of slate in them. So they're more of a mixed media than a strictly woodworking project.
Your dimensions were too close on the chair which made it a tight fit but I do admit that looks like a fun project
That's actually really neat. I hope Andrew gets all the recognition possible for that dope design
Man every time i hear you say yins im automatically transported back to my apartment i had in PA, first time i heard someone say it i laughed so hard
To answer your question, yins hasn't built hardly at all in the last few videos, and a lot of us'ns watch hoping to see a project from start to finish to inspire us on our own projects.
Lol your gonna be jacked by this winter lifting that every time. You'll look like that Russian arm wrestler with 1 huge arm lol.
You probably already knew this but Steve Ramsey has a full video on that first thing.
Plus Room for cup holders on the sides
Anyone know where he got the Nick Offerman picture in his shop? Would love to have one of those for mine.
Maybe some sewing tiktoks for the next video? 😉
With the sanding dowel, just chuck the dowel itself, no half screw to ruin your chuck
That's what I do and I just cut a slot in the dowel to hold the sandpaper. It can flap around. It tightens up when it's on the work anyways.
You worked so hard on that rocker that you ripped your pants.
I just put a slot in a dowel, slip a strip of sandpaper in the slot and chuck the dowel up. It's cheaper than those sanding drums.
The fact that you boiled water in a cast iron Dutch oven totally ruined it.
was that some Pittsburgheese I heard? (6:27) I think it wassssss
Edit: Saw your last video, your content gets buried unless ya do tik toks, but ya i knew it, then saw Bikes and Beards and knew.
Instead of putting a screw into the dowel for the sander, just put the end of the dowel into the drill. I had to do something like that and it worked for me. I'm newish, so is that actually a bad idea? I really don't know.
Nah, it's perfectly fine. Saves you from buying another tool I guess?
Why did they not just chuck the dowel? What did a screw buy them except complication and damage to the chuck?
Well I didn’t make up the stupid tik tok haha I just tried it.
@@John_Malecki wasn't blaming you, but saying the tik tok was stupid.
Yinz seem to have a slight breeze opening with that denim
That chair needs some cup holders built in
That batman blend.... lmao
is there a chance to buy the oval chair? I would love to carve that and spruce it up for an amazing looking chair.
you can hit up andrew, i think so!
0:38 Holy Ass Clownery Batman
Am I the only one that misses the build videos?
You missed 2 weeks ago?
@@John_Malecki I never miss a video! But for me personally the tik tok/pallet of returns videos don't hold my attention as much as the build videos 🤘
If anyone questioned how large you are compared to the average human on social media, i think the dude curling up in what looked like an oversized rocker that you then sat in and made it look like a 1/2 scale rocker pretty much says it lol
Brute force and ignorance prevails once again bravo John
Has cnc
Uses chorded jigsaw
I love it
Has Internet.
Uses the wrong word anyways.
@@1pcfred grammer nazi
@@Blake91818 once you've taken work off a CNC machine putting it back to take another cut is not trivial. You need to use a 3D touch probe to get the work aligned again. For something as simple as enlarging slots it isn't really worth doing. Heck you'd have to generate all new G Code too. Or you could just scrap $120 worth of material and cut the job all over again too I suppose. Plywood is pretty expensive these days.
I was hoping to see you show the TikTok of the locked in screw, to see if your way was their way. Also please show more janky TikToks in these videos, and try to upstage them, flex them woodworking muscles.
the pittsburg pride when u said yinz im swooning
Would love to see you guys test out one of those SN-Tools 3 in 1 Chinese made saws! Seems like they’re either genius or total trash.
Plans not available on the link :/
He doesnt have them ready yet, you have to get on his waitlist
@@John_Malecki yeah, just joined!
Ok it’s official. You are phoning it in at this point. BUILD SOMETHING BIG BOY😂
🤣🤣
Yay🎉
Make a baseball bat with hand tools only
Great Build on the rocker chair...I mean copy somebody elses design... can't wait for the video of Big Lots returns next month
I saw the nail in the board you cut the last finger then put the nail in then glue it back
has hundred + thousand of dollars in tools but can't afford to replace his pants that have holes in the crotch! lol Great video though.
My wife noticed that too! Hmmm what’s she looking for?
@@kevingade5118 probably his WoodPecker tools! LMAO!
Why use a screw in the dowel? You can just put the dowel in the chuck, right?
Sometimes, the reason why you'd need to know how to make the drill sander, is bc you're COMPLETELY out of money, & even credit. So you CAN'T just "go buy the dremmel." Been there, done that. It sucks.
I'm pretty sure the original screw was just cut and edge glued.
i got the same pants😁😁🤣🤣🤣🤣
I think the boiling of that comb shaped piece of wood is stupid. Just breaking the wood and gluing it back after inserting the nail or screw would have same effect
Just put the dowel in the chuck🤣🤣🤣
for the dowel sanding trick, why wouldn't you just chuck a whole dowel into your drill? Much simpler.
Yins didn't do a Roubo build video in 2 minutes... sheesh, cause thats what the internet NEEDS, not like instruction or plans or etc. (Actually another one of those does sound kinda cool) Meh, either way, always fun watching
Poor John, he seems lonely now :(
Yeah I heard that they all left him.