DJI Mavic Gimbal Fix - Quickest best way to change your Mavic drone gimbal
Вставка
- Опубліковано 18 жов 2017
- If you are getting an error message that says: "gimbal obstruction" and the gimbal calibration does not fix the error, you most likely have a bad gimbal. This video will show you how to quickly and easily change the 4K gimbal for the DJI Mavic Pro drone. Look below for a list of everything that you're going to need.
More clips and pictures that didn't make this video
/ alexedit
/ urbandrones
My company
www.urbandrones.com
Equipment I use on my videos
Editing Software:
Adobe Premiere - www.adobe.com/products/premier...
(affiliates)
Cameras:
Canon 70D
amzn.to/2wnWRCl
Sony RX100v
amzn.to/2ire8F2
GoPro 5
amzn.to/2wnOGWJ
Lenses
amzn.to/2xcXUTe
amzn.to/2w3EOik
Drones:
amzn.to/2vYGtar
www.urbandrones.com/collectio...
dji mavic Gimbal: amzn.to/2yz6ONw
Hex 1.5mm tool: amzn.to/2zmInke
flat head driver: amzn.to/2yzlzzS
silicone glue: amzn.to/2zACuRk
dji mavic: amzn.to/2yzIoU9
Inquiries:
Alexedit@gmail.com
If this fixed your issue, please report back. If it didn't, let us know how you fixed it. thanks!
I have the same problem, I dont normally use the gimbal clamp while travelling. I faced the gimbal motor overload error. My gimbal reacts exactly like yours. May I know your mailing address for repairs and the cost?
James Lama my email is on the description-
WHY IN THE WORLD would you replace the full gimbal and camera part when it's only the flat ribbon cable that has been damaged. That is a GBP 15 cost repair vs over 300 pounds for a full replacement. Do I miss anything here - maybe you just want to sell the full replacement kit?
Christian Åkerlund because it wasn't the cable
Just changed the gimbal on my Mavic Pro. Very helpful video. Thank you for posting this.
Great video!! Totally agree with you on the length of the video, nothing against some posters, their info is usually very good, but when I'm frustrated over needing to fix a drone, I want the video to get to the point and show me what I need to know. Cheers!!
This is awesome! Thanks for making it look so easy.
Thanks for the info. I had to replace the plate the camera attaches to. The bands seem to have stretched a bit and used your process with a little deviation, but in the end was a success.. OHHHHHHH YEEAAAHHHHHH! Thanks again
Great video indeed, thank you for sharing it. hello from Nicaragua amigo. I had the same issues, I replaced the gimbal with no problems, all fine, but when I am flying the camera films with waves line in the video, the stability of the gimbal is great but the video is not stable. Any suggestions, thank you!
So I am trying to remove the screws (with the right tool) an 2 of there are already stripped before I even try. I got one out with a flat head but the other top screw is not turning. They came this way from DJI. My drone was replaced under warrantee and they gave me a refurbished one which I was not happy about. Now I am stuck. Any suggestions?
Grate demo.
Excellent video!
My mavic apart from having problems with the gimbal as samples in the video the camera does not seem to communicate with the drone. The image is all black. I will solve by replacing the gimbal or I need to change another component such as flex?
Thank you
you need the other cable. the ome with lots lof wires. thats the video
I have the new camera and gimbal and will try and replace. What state are you located in?
DITRH Florida
Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much
This video is well made, as you show exactly which screws to touch and how to dissassemble and assemble pieces - removes a bit of the scare...
You could have said, though, which kind of screwdrivers or other tools you should get or have: / I came across this video as I occasionally (note: not always) get heavy gimbal shake (sometimes with, sometimes without an "excessive vibration" warning) and that is absolutely useless for films for my Golf&Tesla channel (I use the drone mainly for my golf course reviews, views of Tesla superchargers from above, and occasional landscape footage). If I can avoid it though, I don't want to take the drone and camera/gimbal apart...
What is the smal pcb hanging where the broken of leg was? Antenna?
Ohhhh mannn that's pure nostalgia seeing it work at the end
Had a user error crash and had to replace the gimbal. Thanks for the informative How To.
Bluegrass Preservation so glad I could help and you’re back flying.
About how long to replace if continual without stopping.
Good Video my friend. My Mavic Pro camera will not focus or respond on autofocus. I have updated firmware reset camera setting but makes no difference. Any ideas? I would really appreciate some help on this.
Derek White did you get this resolved? It’s possible that an internal lens moved inside the camera due to vibration.
Hi, I have the same problem that you showed in the video. But mu error message is: "motor overload". Do you think it's the same error? How can I know if the problem is the ribbon or the complete gimbal? I'm asking this because of the big difference of price between the 2 . Thanks!!!!!!! Davide from Italy!
davide rossi the only way to find out is by changing the ribbon cable and if this doesn’t work, then you have to change the whole gimbal.
Excellent how 2 Video
Ron sheets thanks. Hope you subscribe
Can I fix the gimbal on my mavic mini? The black part holding the camera to the drone broke and split, not completely but a lot. Just happened.
Thanks for this video. I successfully mounted my new one, and it works beautifully... except the vision front left and front right won't work anymore. It's spitting out errors. Any suggestions? I think I'll open it back up and check the cable connections over the gimbal itself...
Try going in the control settings and doing a gimbal calibration. Also reset the gimbal to factory settings. Please report back to help others
@@FlyersDistrict I got it working. I opened it back up and took all the cables out and reseated them. BINGO! :)
Thanks for the response!
My gimble came off the little clip it locks into but everything is attached ill try this method to connect it
subbing due to the song and instructions
thanks!
I have an error coming up says check gimbal clip how can I fix that
i see :( my drone was broken.
but when i flip the gimbal when they doing calibrated. this work excelent. but not for 5-8 minutes
How much is the pice?
Same problem. Always forgot to put back the gimbal clamp :(
best video about replacement, But men, why you just not replace only the cable ?
Maks Kuharenko that's what I thought too.
Maks Kuharenko That’s the first thing I did while troubleshooting, so I ended up replacing the whole thing
why not replace only the gimball and not the camera. It's 5 time cheaper
@@r.s.overland6134 I'm checking prices now, I know it'll be more expensive, but I DO NOT want to mess with that ribbon. I've watched a bunch of tutorials on it and once tried doing it myself on a Phantom 4 camera, too intricate. I get frustrated to easy I guess..lol.
@@sunshynff the camera is just snap on the gimball ifi remember when i change it. So it's 90% like changing the Gimball just you keep the tiny camera
i am having a problem with DJI mavic pro, i shaked the drone very harshly and after that the camera wasnt stable and after some time it also left to give image on mobile.
Adv Rana Irfan Shahid go in the app and reset the gimbal. If that doesn’t work, it could be the cable.
Flyers District how to reset??
Adv Rana Irfan Shahid it’s in the camera menu in the app
I hope you are using protective cover now))
funkylosik I am 😂
pls my dji mavic is not okay de motor is not working how can i fix it ?
austine nwankwo how did that happen? Did you crash it?
Flyers District it hooked on wire and before I could reach there it hits the ground and was not able to fly ,but every other thing is working
just gotta change that motor
Aircraft Disconnected Error :(
How to replace the gimball but NOT the camera? as gimball cost 30€ the gimball + camera cost 170€....
R.S. Overland I don’t think they sell the camera by itself.
yes you can buy it
so basically my dgi gimbal is fucked!!
he looks like a funny fish....
What's a funny fis?