I hope they reply to questions and/or requests for help with their products via email. Their mainland brothers are very lacking in aftermarket service and help.
@@bertroost1675I know that and do not mean everyone there is doing that. Most likely they do not, but some CCP partnered operations do. This is outlawed in Taiwan. Some mainland Chinese companies like Fosi Audio is doing a great job on budget amps sporting Texas Instruments ICs & quality supporting parts. I am selective in what & who I purchase things from CCP China. I have no such reservation with Taiwan at this time.
I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!
I was interested in Usher back then. But they had a thin distributor network and it wasn't possible to approach one. So I got with a PMC Fact8 and I'm happy with it.
Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs
@@jimtincher7357 Notice how the board locally flexed once screwed down 12:51 . Inducing unnecessary flex in the brittle board doesn't seem like good practise, stand offs would be better. 10:37 those 2 inductors (coils) should be mounted perpendicular to each other. In their current orientation the magnetic field from one is close enough to induce a current in the other.
As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community • It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸
Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬
Taiwan is the the leader of so many hi end silicone chips and stuff now, they have tech the rest of the world depend on, the chip shortage the has affected the world a couple of years ago was all because of a fire somewhere in Taiwan from memory. Not to get political either but Taiwan must be protected from China if it comes down to it. This little country is amazing and deserves the world's support to ensure its freedom continues. ❤️
12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))
Согласен (особенно если паять бессвинцовкой, как делает законопослушный, eu-шный Pro-Ject), солидные фирмы не используют дорожки для сигнала - только кусок ламината как основание для поверхностного монтажа "элемент к элементу".
Особенно в момент 13:42, когда коннектор впихивается под клемму, а не надевается на клемму. И так там всё. Фигли, ручная сборка. И ещё интересно, медная-ли там "медь" - не показали момент припаивания катушек, вполне может быть обычный крашеный алюминий.
При ТАКОМ оборудовании ,иии ручной труд.... ,,,нет это получение максимального удовольствия от проделанной работы,,, БРАВО РЕБЯТАМ делающим такие вещи.....
보기에 4인치 미드레인지만 생산하는듯합니다. 우퍼는 스켄스픽 8545를 흉내낸듯하고 (국내에도 차량용으로 90년대후반 '솔로'라는 이름으로 8545와같은 중국산이있죠), 그 옆에 스피커 우퍼도 이톤 헥사콘을 사용한듯합니다 (중국산 페이크) 그래도 인크로져에 격벽을 제대로 했고 피아노 글라시 마감과 패시브 네트웤 공심코일을 감는거 보니 꽤나 작업범위가 넓네요. 다만 내부선재를 조금만 더 좋은걸 썼었으면 어땠을까,라는...
I purchased a cheap Ryobi battery powered caulking gun for a big job one time back in 2014. I ended up using it full time, even for small jobs. A hand save for sure. Just get the smallest battery to be lighter and even the smallest will last days of full use.
From the video description: "How are high-quality yet affordable speakers produced?". The answer is blowing in the wind, because in my mind at least, 16000 US dollars/set is not what I'd call affordable speakers. The speakers do however look like they're top of the line! Love the finish, and the attention to detail, i.e. home rolling the passover filters.
Arrêtez de nous vendre des enceintes au prix de l'or, Plastique et caoutchouc pour une durée de vie limité. Suivre les marques ancestrales en bois qui peuvent Durrer. Si ce n'est pas du papier ou des compressions ça sonnera moins bien, c'est pas parce que nous sommes à l'air numérique qu'il faut construire n'importe quoi; le son se moque de l'esthétique. Soyez écologique . PLUS DE 50% DES ENCEINTES NE SORTENT PAS UN SON NATUREL; . Je préfère les construire moi même avec passion sans plastique.
I am very much doubting the "high end" claim here. The tolerances and manual gluing parts together at 4:00 seems to be pretty poor. Big gaps, joint glue is not spread out properly. This is one of those product that may LOOK high end on the outside, but is just poor quality. 7:00 Just surface mounting the baffle to the cabinet with sicaflex and nothing else is a cheap solution. Also at 9:00 this is not making of speaker drivers, this is the cross over. Made with really cheap parts with low tolerances, Same here, nothing high end about this. At 12:00 no clamping on the spider after gluing it. 12:45 The cross over board is screwed in too hard and is bent, this will crack and fail over time. 13:45 No gasket seal between the woofers and the cabinet will cause massive cabinet resonances.
Very beautiful and instructive! Thank you! What I appreciate the most, there is no one describing how these are the best speakers in the world and boring us with his incessant chatter! The images speak for themselves!
Super satisfying thanks for sharing, also I've noticed how many women are doing the soldering and more intricate details of the build on most if not all the factories I've seen. Women do have that eye for detail, I'm a guy but I just know that's facts so love that women are being recognised for their extra abilities in different areas.
@@genagolev2570 Это такая технология, грубые волокна добавляют жёсткость мембране... Подобного типа мембраны есть и у по настоящему дорогих и именитых колонок.
China hat sich sehr gut Entwickelt. Und alle Handwerker im Video sind sehr Professionell. Den einzigen Kritikpunkt sehe ich nur bei der Gehäuse Stärke im bereich wo die Chassis eingesetzt sind. Da würde ich innen Anfasen, wegen Kompressionseffekten. Vielen Dank für das Video😊💚 P.s. Ich baue meine Lautsprecher selbst und habe auch einen Kohlefaser Kefler 8 Zoll Bass von Usher. Extrem Tiefer Bass -3db bei 27 Hz
This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.
This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.
There are some that are really high value and little to no profits as well, like Philharmoninc Audio and Ascend acoustics. Philharmonic in particular will sell you probably a speaker that costs him like $3K+ in parts and labor but only makes out like $100-200 per speaker
@@ubacow7109 Agree - Ascend puts a lot of money into custom SEAS drivers and laminated bamboo cabinets, while competitors are using MDF and cheap drivers.
that's the real bullshit of audiophile audio. price is insane, but such videos confirm there's no rocket science in it. just very well, hand made speaker from decent self made components. definitely not worth these insane money. adam audio monitors (to name of other dozens!!) are relatively well priced and sound just amazing for my needs.
Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..
I'll buy this and put it in my apartment building and all my neighbors will have to move straight to Siberia! Otherwise, great and honest work by the craftsmen. I'm from Prague😂
What an amazing experience watching these quality built speakers with such care and a love for craftsmanship! This is high-end indeed. I wonder if this is Taiwan 🇹🇼 Thanks and good luck for continued success.
Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..
First of all your statement is not relevant to My response..I am a mechanical engineer and a hi end audiophile for over 40 years...and be careful about referencing b&w speakers because only the 800 series is manufactured in England and everything else in mass produced in China..and I am not diminishing some of the Qualiry components that come out of China..But emphasing the "mass produced" statement
Yes, but my point with a heavy driver and a huge magnet structure has a lot of weight centralized initially.so the pull force will be enhanced in that location before the whole driver is installed.also the driver with that much weight should be supported while all the fasteners are attached.Then and only then should they be torqued in a diagonally opposed fashion
Wow proses pembuatan box speaker dan proses pembuatan speaker yang sangat luar biasa desain yang sangat hebat dari awal sampai akhir video yang sangat aku sukai ❤❤❤❤❤
I love the zero guard cnc. It's as if tools never suddenly explode or machines don't randomly crash, cause tools to explode. OSHA would love this place.
Такой мощный корпус и пластиковая панель, держащая все динамики ... Что то у меня не вяжется до конца представления о высокой акустике , в интерьере конечно будет смотреться очень солидно ... И конечно же ребята молодцы, у нас в России таких цехов не отыскать днём с огнём , к сожалению ...
I enjoyed watching this video .Some good production techniques. I used to work for Duntech Audio back in the 80s and wathing this brought back a lot of good memories.
I’ll stay with my 1974 Altec Lansing 150 # a pc speakers 15” woofers, horn mid range, horn high freq. all Alinco magnet. Range 10hz to 20 kHz 110 db 1 watt at 3 meters. Low volume to 100 watts just sounds beautiful, superb imaging outstanding voice of all instruments, saxophones are dreamy. sware I can hear the horse hair against the strings when I play orchestra, play Metallica. It’s like being surrounded right on stage with them. Very sweet for 50 yr old speakers
These are $15k but that’s the beauty of audio equipment, if you’re happy with your sound then stick with it. After a certain point it’s all subjective anyways.
price in Taiwan where the speaker is made, this unit is about 6,000 usd sold directly by Usher. i guess shipping / import tax / foreign dealer margin will affect the final price in different region. but same thing applies to all things when comparing between domestic or import goods.
This speakers ain't worth more than 500 a piece. Shit quality from start to finish. I'm stunned they actually make vids to expose their awful speakers.
@@kolgrillarn I'm sorry, what material melts? It's a PCB, it's designed for that very purpose. And yes, while I agree it won't suffer the same movement as say in a car, it is inside a speaker cabinet that will involve a degree of vibration and resonant frequencies, so it's not without complete movement. All I'm saying is that for 1k + speakers, they could do a better job with it.
I enjoyed this video. The only thing I wonder about is one thing. When you hammer down the bottom and top cabinet pieces into the cast frame? You didn’t press the veneer against the perfectly cut plates. There appears to be gaps that the epoxy or glue filled. I guess because you are looking for perfect linear appearance from top to the bottom. The veneer is cast.
Sorry but there is no way on earth that these are worth $14,000 USD. Sure other companies might also be ripping people off charging 400k, but if this is all it takes, and its not even a solid piece of wood (its compressed plywood sheets) or extremely complex electronics (like a PC), its wildly overpriced, must cost under $500 to manufacture this in parts.
This is far from high-end, more like a ordinary speaker with expensive look. Nothing wrong with that, most consumers buy with their eyes, to impress people
Usher 是我人生的第一組音箱，到現在快30年了，依舊工作正常！
為認真的台灣作品鼓掌！🎉
我也是❤
品質真不錯，耐用👍👍👍
Primarily handmade, even the speaker driver. Thumbs up to this Taiwanese manufacturer.
I hope they reply to questions and/or requests for help with their products via email. Their mainland brothers are very lacking in aftermarket service and help.
@@bertroost1675One other point- they are not using political prisoners as slave labor to lower cost.
@@kenandbarbie-b6c I am friends with an audio manufacturer in China and he doesn't use slave labor.
@@bertroost1675I know that and do not mean everyone there is doing that. Most likely they do not, but some CCP partnered operations do. This is outlawed in Taiwan. Some mainland Chinese companies like Fosi Audio is doing a great job on budget amps sporting Texas Instruments ICs & quality supporting parts. I am selective in what & who I purchase things from CCP China. I have no such reservation with Taiwan at this time.
คงแพงมาก ซิครับในไทยน่าเข้ามาไหมครับ
I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!
$26,000 US for a pair of speakers is an absolute bargain? I'll just go in my basement and chip what I need off my collection of gold bars.
I was interested in Usher back then. But they had a thin distributor network and it wasn't possible to approach one.
So I got with a PMC Fact8 and I'm happy with it.
Glad you like them, personally I think they look awful and I was very unimpressed by the standard of soldering.
Perhaps they sound good but they way they were put together was just rough. particularly the gluing of internal components, jees.
In today's audio world, there's way better for less.
臺灣之光！！！USHER 品質很棒的牌子~我的S-520桌上型喇叭用了快十年！！！音質太棒了👍👍👍
Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs
Actually there was a standoff... it looked like foam to absorb vibration and to isolate the board.
Die Arbeiten wie die Büffel ohne Gefühl
@@jimtincher7357 Notice how the board locally flexed once screwed down 12:51 . Inducing unnecessary flex in the brittle board doesn't seem like good practise, stand offs would be better. 10:37 those 2 inductors (coils) should be mounted perpendicular to each other. In their current orientation the magnetic field from one is close enough to induce a current in the other.
I think the professional level of workers is still poor
@@wally7856 maybe its part of the sound design ?
還有很多小細節可以再 精進！老外就是厲害在越不注意的地方，越是有 畫龍點睛 的音效，以HI END的角度分析。如果以20萬級距內，他是可以跨獎。揚聲器的調音是哲學問題，當你深入了解，其實就是 陰陽太極的對應！個人研究喇叭，超過15000hr才摸出其中的精華處，可惜 音響行業，還是民族性產業，還是很敬佩 創辦人 阿水大師！
As someone watching from the US
• Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community
• It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers
• Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us
• Thanks so very much for posting and sharing!
All the best and God Bless. 🇺🇸
Thank you🥰
タイムスタンプ
0:00 オープニング
0:11 スタート
0:17 エンクロージャー用合板接着工程
0:45 エンクロージャー用合板プレス成形工程
1:12 MC によるエンクロージャー用合板切削工程
2:56 切削加工後のバリ取り工程
3:22 エンクロージャー内装組み付け工程
4:49 エンクロージャー傷取り工程
5:49 バッフル傷取り工程
6:13 バッフル研磨工程
7:02 エンクロージャー外装組み付け工程
8:56 中空コイル製造工程
9:32 ネットワーク組み立て工程
10:45 スピーカーユニット磁気回路組み立て工程
11:10 スピーカーユニットフレーム組み付け工程
11:32 スピーカーユニット振動系組み付け工程
12:31 スピーカー組み付け工程
14:00 スピーカーストローク検査
14:13 バッフル組み付け検査
14:23 測定検査
14:33 完成
所々自信が無い所があるので誤りがあったら申し訳ない😢
Good job 😃
Thank you🥰
Thank you Jap!
久々に有能な人をネットで見た！ありがとう！！
Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬
I saw the same thing and literally said "OUCH" out loud!
Ещё я увидел стальной молоток стучали по дереву, много клея, очень много клея.
Especially when you consider these things start at $14,300 US dollars per pair!
☝️
@@АлександраМезенцева-н2зyes too much glue
ML802一直是我的Hi-END，聽2-3小時都不膩
Amazing... the best qualitys Made of Taiwan...so beautiful.. enjoy your music with Usher...❤❤...15:12.
They learned it from Japan.
Taiwan is the the leader of so many hi end silicone chips and stuff now, they have tech the rest of the world depend on, the chip shortage the has affected the world a couple of years ago was all because of a fire somewhere in Taiwan from memory. Not to get political either but Taiwan must be protected from China if it comes down to it. This little country is amazing and deserves the world's support to ensure its freedom continues. ❤️
12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))
Согласен (особенно если паять бессвинцовкой, как делает законопослушный, eu-шный Pro-Ject), солидные фирмы не используют дорожки для сигнала - только кусок ламината как основание для поверхностного монтажа "элемент к элементу".
Там не пайка, а насрано и вообще кроссоверы надёжнее собирать на скрутках.
@@genaishivatov1737какие фирмы сейчас это делают, подскажите пожалуйста?
Тоже согласен. Китай, он такой Китай. Ширпотреб. Высококачественного ничего не увидел.
А две катушки в одной плоскости намотки никого не смутило? Неужели тяжело развернуть одну вертикально?
Очень приятно смотреть на процесс сборки 🙂👍
Особенно в момент 13:42, когда коннектор впихивается под клемму, а не надевается на клемму. И так там всё. Фигли, ручная сборка. И ещё интересно, медная-ли там "медь" - не показали момент припаивания катушек, вполне может быть обычный крашеный алюминий.
При ТАКОМ оборудовании ,иии ручной труд.... ,,,нет это получение максимального удовольствия от проделанной работы,,, БРАВО РЕБЯТАМ делающим такие вещи.....
I own a fine pair of wood veneered Usher 520s speakers. I have had them for almost 15 years. Very good speakers and well made.
It is Usher's proud work
모든 유닛을 자체제작하는지 모르겠지만 요새같이 분업화된 오디오계에서... 중국 말고도 동양에도 자사 유닛을 만들어서 생산하려는 완성품업체가 있네요. 앞으로도 좋은 제품 많이 만드시고 세계적 명성도 얻으시길.....
보기에 4인치 미드레인지만 생산하는듯합니다.
우퍼는 스켄스픽 8545를 흉내낸듯하고 (국내에도 차량용으로 90년대후반 '솔로'라는 이름으로 8545와같은 중국산이있죠),
그 옆에 스피커 우퍼도 이톤 헥사콘을 사용한듯합니다 (중국산 페이크)
그래도 인크로져에 격벽을 제대로 했고 피아노 글라시 마감과 패시브 네트웤 공심코일을 감는거 보니 꽤나 작업범위가 넓네요.
다만 내부선재를 조금만 더 좋은걸 썼었으면 어땠을까,라는...
The most satisfying tool for me is the air powered caulking (gluing) gun. My right hand asked me "Can we get one?".
I don't know what I'd use it for but I need it lol
@@pattygq I've been weatherproofing a house, going through many tubes of calking, and just thinking about it makes my right hand hurt.
@@teazer999999I went through it not long ago and know exactly what you mean.
I purchased a cheap Ryobi battery powered caulking gun for a big job one time back in 2014. I ended up using it full time, even for small jobs. A hand save for sure. Just get the smallest battery to be lighter and even the smallest will last days of full use.
ฝีมือคนใต้หวันเยี่ยมมาก ตั้งใจทำมาก
Since 1972'...WOW
One year younger than me 😊
Congratulations, and good job !
独特なスピーカーコーンしてますねネットカバーも無いしホコリとか溜まったら掃除し辛そう
Почти как и я в гараже делаю. Только мегафрезера нет!😁
Забавно то, что эта шарага, продавая пару колонок за 14 килобаксов, не может обеспечить персонал СИЗами.
А ну ка покажи своё произведение.
@@mrPOCCU9IHUHтак они в намордниках
@@ДрачёвыйНапильник-ф9б Это маска гигиеническая и пыль практически не фильтрует.
,, ручная работа,, от слова совсем! Но много.....
From the video description: "How are high-quality yet affordable speakers produced?". The answer is blowing in the wind, because in my mind at least, 16000 US dollars/set is not what I'd call affordable speakers. The speakers do however look like they're top of the line! Love the finish, and the attention to detail, i.e. home rolling the passover filters.
"Affordable" seems a bit relative...
Layers and layers of material help absorb internal resonances, perhaps. Mind you, internal bracing and non parallel straight edges may also help.
Arrêtez de nous vendre des enceintes au prix de l'or, Plastique et caoutchouc pour une durée de vie limité. Suivre les marques ancestrales en bois qui peuvent Durrer. Si ce n'est pas du papier ou des compressions ça sonnera moins bien, c'est pas parce que nous sommes à l'air numérique qu'il faut construire n'importe quoi; le son se moque de l'esthétique. Soyez écologique . PLUS DE 50% DES ENCEINTES NE SORTENT PAS UN SON NATUREL; . Je préfère les construire moi même avec passion sans plastique.
the more like 160 dollars wtrf u talking 16k ahahaha
@@BenSuzi1980 LOL no they are not like the shoebox speakers u saved up to doing a paper route bruh wtf
I am very much doubting the "high end" claim here. The tolerances and manual gluing parts together at 4:00 seems to be pretty poor. Big gaps, joint glue is not spread out properly. This is one of those product that may LOOK high end on the outside, but is just poor quality. 7:00 Just surface mounting the baffle to the cabinet with sicaflex and nothing else is a cheap solution. Also at 9:00 this is not making of speaker drivers, this is the cross over. Made with really cheap parts with low tolerances, Same here, nothing high end about this. At 12:00 no clamping on the spider after gluing it. 12:45 The cross over board is screwed in too hard and is bent, this will crack and fail over time. 13:45 No gasket seal between the woofers and the cabinet will cause massive cabinet resonances.
Exactly my thoughts. Def. not high quality.
Imagine being this wrong. In public!
@@androod6211I assume you mean the video?
Careful. You'll trigger some people.
Very beautiful and instructive! Thank you! What I appreciate the most, there is no one describing how these are the best speakers in the world and boring us with his incessant chatter! The images speak for themselves!
Super satisfying thanks for sharing, also I've noticed how many women are doing the soldering and more intricate details of the build on most if not all the factories I've seen. Women do have that eye for detail, I'm a guy but I just know that's facts so love that women are being recognised for their extra abilities in different areas.
The famous Marantz vacuum tube amplifier is said to have been manufactured by female workers in Long Island, New York in its early days.
Одно удовольствие смотреть как люди работают,выстроена технология.
Отличная работа,красиво смотреть
Много ручной работы,что показывает о цене труда и качестве изготовления.
Браво👍👌💪
Едем на работу туда?)
Едим👌😉
@@RRRSaulius 👍🚗
Piiyupoyypoy
Piiyupoyyp
3:36 Металлическим молотком по дереву, просто шик.
Não se bate diretamente na madeira com metal, tinha de usar algum pedaço de madeira intermediária.
@@sergionicolis664 Или просто нужно использовать резиновый молоток.
Почему на динамике видны струпья, что за уродство?
@@fiscal_registre Ты лучше сделаешь?
@@genagolev2570
Это такая технология, грубые волокна добавляют жёсткость мембране...
Подобного типа мембраны есть и у по настоящему дорогих и именитых колонок.
у меня одного ощущение, что смотрю видео с завода в СССР 1972 года? 😀
Да у тебя одного
Где ты видел в СССР такие высококлассные колонки да материалы все современные. Сказочник.
四十年前上高中的我組裝音嚮前後級功放搭配的揚聲器就雅瑟音響🔊。突然想起青澀的少年時代…
同感，三十多年前我十七岁组装了CD，场 效应管BTL功放和音箱，两年的零花钱就没了。
以前在台北市漢口街有販賣展示店，不曉得是否還在
할
該開駭
Luar biasa .bisa langsung melihat prosesnya.terima kasih
過去我是從事音磁規，音圈，音模全世界最大的被動元件生產商，難得有機會能整體看完音箱生產。
P7
Amazing process, highly precise and durable
China hat sich sehr gut Entwickelt. Und alle Handwerker im Video sind sehr Professionell. Den einzigen Kritikpunkt sehe ich nur bei der Gehäuse Stärke im bereich wo die Chassis eingesetzt sind. Da würde ich innen Anfasen, wegen Kompressionseffekten.
Vielen Dank für das Video😊💚
P.s. Ich baue meine Lautsprecher selbst und habe auch einen Kohlefaser Kefler 8 Zoll Bass von Usher. Extrem Tiefer Bass -3db bei 27 Hz
Taiwan not China.
@@jackronin4371 Ohh sorry, i have thing Usher comes from China
Thank you from Taiwan🥰
キャビネットの木材は湿度があってもソコソコ良い物が仕上がると思うけど、スピーカー自体はどうでしょうかね？
紙では無く薄膜アルミ素材とか使っているのかな？
Excellent video ! 👍
This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.
It seems like it would easier to install the crossovers before gluing the front panel on.
This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.
There are some that are really high value and little to no profits as well, like Philharmoninc Audio and Ascend acoustics. Philharmonic in particular will sell you probably a speaker that costs him like $3K+ in parts and labor but only makes out like $100-200 per speaker
I think pro audio has lower profits and much better engineering. Midfield monitors or even main monitors.
@@ubacow7109 Agree - Ascend puts a lot of money into custom SEAS drivers and laminated bamboo cabinets, while competitors are using MDF and cheap drivers.
@@niceguy100000 I have Kali LP-6 monitors, and they are insanely good for $400/pair. Plus, no amplification is required, which adds even more value.
that's the real bullshit of audiophile audio. price is insane, but such videos confirm there's no rocket science in it. just very well, hand made speaker from decent self made components. definitely not worth these insane money. adam audio monitors (to name of other dozens!!) are relatively well priced and sound just amazing for my needs.
第一次看到扬声器在工厂製造，真想不到台湾的扬声器製造， 直逼一些欧美大厂的工序 !
哈哈，不知会不会，接受少量按图纸订制的扬声器音箱哩 ?
过去我製造给自己玩耍的扬声器音箱，早期自己製作 . 当然手工欠佳，在所难免 !
后来往内地找师傅製造的扬声器，当然手工比我好，但是他们对音箱製作的知识，也付阙如 !
像今天看到这间深具技术的工厂製作，简直不能比拟 , 所以才忽发奇想呢 !
Pretty crude speaker tech in nice wooden packaging.
I tought the same
Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..
This video is so satisfying to watch. Thank you for posting! And I have owned Usher speakers in the past and they are quite warm and special.
Thank you🥰
I'll buy this and put it in my apartment building and all my neighbors will have to move straight to Siberia! Otherwise, great and honest work by the craftsmen. I'm from Prague😂
Awesome video! In Thailand has Usher importer shop at Fortune 3rd floor. They have many models of USHER spk .
台灣我 在泰國哪裡？ 喇叭！
I'll be there tomorrow at 2pm
I love this
You love everything.
What an amazing experience watching these quality built speakers with such care and a love for craftsmanship!
This is high-end indeed.
I wonder if this is Taiwan 🇹🇼
Thanks and good luck for continued success.
Yes it is Taiwan
Yes it is Taiwan
@@tan3072 Thanks.
Thank you🥰
Mesmerizing!! I know one thing: I cannot afford these. 😅
Наколенное производство... Особенно порадовала работа электродрелью, как дядя Миша в гараже... )))
Если дрель не использовать, тогда это будет не Hi-End а файбричный ширпотреб! :)))
I love this! The way they do epoxy at 11:02 is genius!
Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..
Watch some B&W videos, to see what true high-end loudspeaker manufacturing looks like.
First of all your statement is not relevant to My response..I am a mechanical engineer and a hi end audiophile for over 40 years...and be careful about referencing b&w speakers because only the 800 series is manufactured in England and everything else in mass produced in China..and I am not diminishing some of the Qualiry components that come out of China..But emphasing the "mass produced" statement
They didn't show the whole sequence, so hard to tell if she only torqued one or all.
Also, the driver used may be set to only reach a set torque.
Yes, but my point with a heavy driver and a huge magnet structure has a lot of weight centralized initially.so the pull force will be enhanced in that location before the whole driver is installed.also the driver with that much weight should be supported while all the fasteners are attached.Then and only then should they be torqued in a diagonally opposed fashion
@@MuscleBN true, but honestly there is so much wrong in this video that they don't seem to care much...
meskipun gak sanggup beli, tapi gw bahagia bisa melihat prosesnya
saya suka prosesnya.dari indonesia.
Very well crafted. I wish if the same can be shipped to India. Now, with Bluetooth speakers there are less wires seen in the homes. Great work.
I've never ( cough) put a screw through a foam surround... Those cabinets are beautiful!
Wow proses pembuatan box speaker dan proses pembuatan speaker yang sangat luar biasa desain yang sangat hebat dari awal sampai akhir video yang sangat aku sukai ❤❤❤❤❤
Isso não é uma simples caixa de som, mais sim uma obra de arte parabéns pessoal 👏👏👏👏👏👏.
Parabéns!
Serviço altamente qualificado e de qualidade!
Salvador, Ba, Brasil.
I love the zero guard cnc. It's as if tools never suddenly explode or machines don't randomly crash, cause tools to explode.
OSHA would love this place.
no gloves, no masks, no vacs on sanders. I've seen people forging liquid metal in India in bare feet too so I guess it's all relative 🤔 😳
Beautiful construction. I see why these speakers cost as much as they do! 🥰👍
Soldering skill ? What soldering skills?
soldering iron is too big
Плата прям без проставок саморезами крепится?)) без дистансеров?
I love the Usher sound. I wish I could hear the latest ones in Southern US. Thanks for showing this process, very nice work!
Если вы увидили при производстве любой деревянной недешовый продукции железные молотки можете даже несмотреть и не покупать!(
생각했던것보다 굉장히 열악하네요. 어셔정도 되는 회사면 좀 대단할줄 알았는데 저 일련의 과정이 과연 획일적인 제품품질이 나올수 있을까? 라는 의문이 드네요
Всё хорошо я просто удивляюсь почему по деревам бьёт железным молотком А есть же специальные резиновые молотки
Такой мощный корпус и пластиковая панель, держащая все динамики ... Что то у меня не вяжется до конца представления о высокой акустике , в интерьере конечно будет смотреться очень солидно ... И конечно же ребята молодцы, у нас в России таких цехов не отыскать днём с огнём , к сожалению ...
скорей всего панель не просто пластиковая , там масса других вопросов .
สวย เเต่เสียงก็เเล้วเเต่หูคนชอบ
I enjoyed watching this video .Some good production techniques. I used to work for Duntech Audio back in the 80s and wathing this brought back a lot of good memories.
用这样的方式生产，产能肯定不会过剩。这我就放心了。
高端客戶就愛手工的 市場決定
国内实在太卷了
@@暗黑的破壞神 是的
The cabinet forming process is amazing , is that heated connections in the mold?
I’ll stay with my 1974 Altec Lansing 150 # a pc speakers 15” woofers, horn mid range, horn high freq. all Alinco magnet. Range 10hz to 20 kHz 110 db 1 watt at 3 meters. Low volume to 100 watts just sounds beautiful, superb imaging outstanding voice of all instruments, saxophones are dreamy. sware I can hear the horse hair against the strings when I play orchestra, play Metallica. It’s like being surrounded right on stage with them. Very sweet for 50 yr old speakers
These are $15k but that’s the beauty of audio equipment, if you’re happy with your sound then stick with it.
After a certain point it’s all subjective anyways.
We care
You are absolutely not getting close to 10hz with vintage altecs lol. maybe down to 40-50hz. Not talking down on altec, just want to correct that
@@remiremillard8419and certainly not at 110dB one watt at 3m lol
Lemon Films killing it 🔥🔥🔥
這家 “ 雅瑟 ” 音響，如果正確的話，六十幾年前發跡於 ‘ 中華商場 ’ 當初只單純的生產音箱而已，如今進步到喇叭，線圈，都是自己生產，給個 賛，不知現在接手的第二或者是第三代？
疫情前兩三年,創辦人因財務問題把公司股權賣給外人了.
@@chunyu01 原來如此，但能夠接續傳承，且發揚光大，也是不錯的。
Que bonito es tener las herramientas adecuadas para ensamblar las bocinas, saludos desde Venezuela..!
Trabalho fantástico. Saudações do Brazil.
Proses pembuatan sangat rapi dan bagus......❤❤❤❤🤝🤝🤝
Great video. How much will they cost coming out off these factory? The price in the hifi shop is 14.300 dollar in the U.S.A.
price in Taiwan where the speaker is made, this unit is about 6,000 usd sold directly by Usher.
i guess shipping / import tax / foreign dealer margin will affect the final price in different region. but same thing applies to all things when comparing between domestic or import goods.
This speakers ain't worth more than 500 a piece. Shit quality from start to finish. I'm stunned they actually make vids to expose their awful speakers.
@@allenlee2670 I think 600 dollar each.
@@DMalek I don't think so.
分频器看起来可以，音箱里面用什么吸音材料？
very nice speaker 👍👍
They look nice speakers, but the soldering on that crossover doesn't look like it'll last very long.
i can't solder. But I can solder better than that.
I partly agree that it might be weak but it is not easy to hot solder on a material that melts! Does not move much as in a car so can hold?!?
@@kolgrillarn I'm sorry, what material melts?
It's a PCB, it's designed for that very purpose.
And yes, while I agree it won't suffer the same movement as say in a car, it is inside a speaker cabinet that will involve a degree of vibration and resonant frequencies, so it's not without complete movement.
All I'm saying is that for 1k + speakers, they could do a better job with it.
I enjoyed this video. The only thing I wonder about is one thing. When you hammer down the bottom and top cabinet pieces into the cast frame? You didn’t press the veneer against the perfectly cut plates. There appears to be gaps that the epoxy or glue filled. I guess because you are looking for perfect linear appearance from top to the bottom. The veneer is cast.
Тяп-ляп как весь Китай! И главное дорого, и потом нет запчастей! Покупайте!!! 🤩🤩🤩
Vraiment Excellent Merci
C est juste incroyable et les enceintes sont magnifiques, limite une œuvre d art
Eu nunca tinha visto uma construção de caixas tão perfeita igual a essas ,a experssura bem grossa, muito resistente
wow
14,300usd!
Brand is from Taiwan ....Usher!!
Sorry but there is no way on earth that these are worth $14,000 USD. Sure other companies might also be ripping people off charging 400k, but if this is all it takes, and its not even a solid piece of wood (its compressed plywood sheets) or extremely complex electronics (like a PC), its wildly overpriced, must cost under $500 to manufacture this in parts.
Hi-end speakers are made with MDF, not plywood.
Nonsense. Every single pro-audio speaker in the world is made from Baltic birch plywood. Every single one at every concert you have ever been to.
He said hi end meaning home hifi . Pro audio different ball game i know what your sayin i worked in both fields@@wally7856
Magnifica construcción, seguramente suenen muy bien, espero verles por Europa pronto
와우
대단합니다,
굿~🥰❤❤❤👍👍👍
Die Verschraubung ist alles andere als OK, überall Spannungen, potenzielle Schwachstellen.
Amazing speakers! Beautiful!
Best work God bless the works of your hands
Nice. I bet these gals can assemble Ikea furniture Kits in world record times 🤣🤣🤣
Nice work, nice filming. A lot of talented people. Thank You from Lyon France.
Marvelous excellent craftsmanship 👍
不错不错，我们大陆也学习一下😘
This is far from high-end, more like a ordinary speaker with expensive look. Nothing wrong with that, most consumers buy with their eyes, to impress people
"AESTHETICS OF SOUND"
我有一台二手雅瑟CD播放機，音質還不錯，放公司播音樂，很耐用💯
看到雅瑟，我也買了一套音響，並想起個人當年的幸福感，如今卻都....，唉！