First of all, the wiring (power and ground) aren't large enough for a 2000 watt load. Not by a long shot. Nice design on the enclosure, props on that.. You finished it off real nice too, the routing makes all the difference in the world. Subwoofer is good looking too. Never seen one quite like that.. although I don't believe for a minute that it's 2000 Watts.. However, I sure would have used a lot more screws than nails myself. With that powerful of a sub (looks like about a 500 w sub) (But for the benefit of the video and not to start crap) If it is anywhere near 2000,you're very likely to blow it apart.. seen it happen too many times from enclosures that are glue and nail or Brad construction.... For real though man, nice combo with the sub and enclosure!
OMG! why does it sound SO BAD!! Either your SIGNAL or the sub's AMP it up WAY TOO LOUD and your distorting it SO MUCH!!!! EWWWW!!! - The BOX was REALLY NICE tho!! But as far as the speaker and amp's I have NO IDEA who made them or if they are good quality... or just cheap Chinese knockoff garbage (EVERYRHING made in China seems to be cheap garbage... ESPECIALLY Electronics!!!!) - So the distortion seems to be the signal going INTO the amp being too loud... MAYBE the OUTPUT on the 4-channel amp has the gain up too high... because it's JUST THE SUB distorting on that kick drum... - - - BUT TBH I JUST CAN'T TELL! The mid's and high's aren't in front of the camera/microphone so all we can hear CLEARLY is the SUB and it just sounds distorted... I HOEP YOU FIGURE IT ALL OUT AND YOU GET THE SOUND TO BE NICE AND CLEAN!!! - AGAIN,. that sub Box is SWEET!!! A little more nails than I would have used, but it will NEVER come apart now!!! LMAO!!! - GREAT WORK!!!
OHHHH around @ 22:30 someone turned the gain down and started to FIX IT!! It DID sound clean... for about 1 second... and then it went back to distorting 🤷♂ okay good! it was good at the very end of the video :) - But 5his WAS NOT THE BEST MUSIC to use for testing out a subwoofer LOL :P
I dunno about that. About it never coming apart. I would have used fewer brads myself, but I would have replaced them with some serious 2½-3" construction screws. I've seen boxes blow apart that used only brads and glue construction.
O sub é tão bonito que tinha que ficar exposto parabéns belíssimo trabalho 👍👍🇧🇷
Poderia compartilhar o projeto com as medidas? Parabéns pelo belo trabalho!!!
Uma obra de arte perfeita.
This would definitely the best speaker if it was played on rebase your ear will definitely like boom 💥🤯😅
Mantap cara kerja ❤
Keren kawab, Terlihat kuat dan kokoh
បងនិងពីតឹកមែន❤
Kdk h bro
dont listen to the crap talk, good effort bro
Hi im watching from the Philippines🇵🇭
Toppp, qual modelo deste subwoofer ?? 🇧🇷🇧🇷🇧🇷
Khatarnak deep bass bhai❤❤❤
Gajab
Adoraria saber as medidas desse projeto.
Giá bán bao nhiêu tiền 1 cái bạn ?
First of all, the wiring (power and ground) aren't large enough for a 2000 watt load. Not by a long shot.
Nice design on the enclosure, props on that.. You finished it off real nice too, the routing makes all the difference in the world. Subwoofer is good looking too. Never seen one quite like that.. although I don't believe for a minute that it's 2000 Watts.. However, I sure would have used a lot more screws than nails myself. With that powerful of a sub (looks like about a 500 w sub) (But for the benefit of the video and not to start crap) If it is anywhere near 2000,you're very likely to blow it apart.. seen it happen too many times from enclosures that are glue and nail or Brad construction....
For real though man, nice combo with the sub and enclosure!
Muito bom amigo gostei parabéns!
What kind of speaker is this please answer..iwant to buy like that..
แจ๋วคับ....❤❤❤
buenas podrias compartir las medidas para la fabricacion del subwoofer 10´
Poderia compartilhar o projeto com as medidas?
LINDO, FALTOU SÓ OS PÊS DE BORRACHA PRA AGUENTAR O PANCADÃO........ONDE COMPRO ESSE SUB ? DIG LOGO!
Saludos de Mexico Diy
Hey bro. Just want ask what machine you used for cutting the hole?
ខ្មែរសោះសុទ្ធតែសរសេរអង់គ្លេសអីណា😅
Не думал что бывают цыганские динамики
some sought of internal bracing would have been nice
Is a polarity backwards somewhere? It sure doesn't sound very good. Sounds like the sub has been overheated at some point
And why run your speaker wires out of the port? It would have looked much nicer coming from the rearr or bottom
ซาวด์ชื่ออะไรครับ
Is there really size 10 inches speaker with 2000 watts ??seems confusing.....
El escape de sonido tiene que ser más lejos donde va estar el parlanton 🎉
What kind of subwoofer is this if there is one on ozone?
I want this box only
Where is the bass tube😂😂
lol You can't see such a big horizontal hole
Blind😂
@@Kantidhruw95 he didn't know why he made channel inside subwoofer box
10 gauge wire for a 2K watt sub??🤔🧐
Pensé que usaria terminales para los cables, pero no 😔 Lástima
คนไทยแน่ๆ
Динамик авто или для дома?На вид это не для музыки,явно для бухалки😂Как и оказалось.Мужик Хип Хопёр или 😂пер
What is size of this box , lxbxh
Song 🎵 name /download link please
the choice of song to test the speaker ruined the whole video.
Hi friend how does you send it for me
Meshament plz 🙂
VIEL zu Wenig Tackerkrampen...
ห๊ะเสื้อตรามงกุฏ
OMG! why does it sound SO BAD!! Either your SIGNAL or the sub's AMP it up WAY TOO LOUD and your distorting it SO MUCH!!!! EWWWW!!!
- The BOX was REALLY NICE tho!! But as far as the speaker and amp's I have NO IDEA who made them or if they are good quality... or just cheap Chinese knockoff garbage (EVERYRHING made in China seems to be cheap garbage... ESPECIALLY Electronics!!!!)
- So the distortion seems to be the signal going INTO the amp being too loud... MAYBE the OUTPUT on the 4-channel amp has the gain up too high... because it's JUST THE SUB distorting on that kick drum... - - - BUT TBH I JUST CAN'T TELL! The mid's and high's aren't in front of the camera/microphone so all we can hear CLEARLY is the SUB and it just sounds distorted... I HOEP YOU FIGURE IT ALL OUT AND YOU GET THE SOUND TO BE NICE AND CLEAN!!!
- AGAIN,. that sub Box is SWEET!!! A little more nails than I would have used, but it will NEVER come apart now!!! LMAO!!! - GREAT WORK!!!
OHHHH around @ 22:30 someone turned the gain down and started to FIX IT!! It DID sound clean... for about 1 second... and then it went back to distorting 🤷♂
okay good! it was good at the very end of the video :) - But 5his WAS NOT THE BEST MUSIC to use for testing out a subwoofer LOL :P
I dunno about that. About it never coming apart. I would have used fewer brads myself, but I would have replaced them with some serious 2½-3" construction screws. I've seen boxes blow apart that used only brads and glue construction.
Play on Indian dj song please
🇹🇭🇹🇭🇹🇭🇹🇭
what is this for? I want to hear the musik, not the speaker`s own sound ! 💩
10 inch, 2000watt????. 😂😂😂😂
Search internet duffer
Indo ngak punya
There’s 10s that push well over 3K watts, definitely not that one, but there’s 10s that do. Theres even 8s that push over 3k watts.
@@princequestly2218lmao😂😂😂😂
6.5 inch 1800 watts
You know american speaker???
Transparent box is better than that
2:30 To sharp to glue use a "hand gloves" what a joke !!!
🤮🤮🤮🤮🤮🤮🤮🤮
Worst sound
Shut up