I appreciate the feedback Bro. I’m new to UA-cam but I tried to make this video the best I could with part numbers and explanation. I want to help out my fellow truckers that work on their own fleet of trucks. I have a lot of footage of many different How-to videos coming soon. Thanks for watching and I hope I earned your Subscription!
my connector broke off and between plastic and rubber hose , last night , I must say it is a challenge to patch it up without proper parts, I used an airline to connect between the lines and some clamps, took me 3 hours, at 32F raining/snowing. Great Video I wish I came across it earlier , definitely subscribing
Thank you for your time watching my video! I hope all of my videos can help fellow truckers save $$$ and keep their truck rolling. I have many videos coming out soon!
I have replaced all of these intersections with rubber and clamps. The 5/16 shark bite fittings work great. The plastic coolant lines were the worst idea ever. They're constantly shattering
Thank you for watching! Hope you liked the video and consider subscribing to my channel, I have a lot of great videos coming soon, on everything from how-to, after treatment faults, and more.
yes sir. i have broken those hoses two times. and lost all the coolant two times. In raining days the hoses broken because the cold water of the road touch the heat old plastic and crack.
Nice little job, I’m familiar with it, you jumped on ahead and replaced them, fantastic, you know sometimes the dealer doesn’t have them an you got to wait for days, 👋👍👌✌️
Very helpful..!! I recently clean my 1 box including dpf filter and also change temp sensor and soot sensor but yesterday pop up SCR malfunction on screen so what we need to do now it's wiring rub issue or anything else ? It's come every morning but after 1 hour it's gone.
To patch it off to loose your coolant if it happens to anyone. If tou happen to have the drain hose. Cut a peace 4 to 5 inches. Connect both ends to the plastic tubes to close the system make it a one hose no leaks. Use clamps or zip ties. Make it off the highway.
Do you know if anyone make those plastic connectors in metal or the nipple part that goes inserted into the hose. These plastic ones always brake after a while.
I’ve never seen these quick disconnect connectors in metal, only plastic. The way that I did it in this video, these coolant lines will always be serviceable and quickly repaired by you anywhere. The tow man and roadside service guys wont be able to take advantage of you.
@@tubeup the plastic connectors have that ridge that helps keep the hose from coming off. The coolant system has pressure, and if you’re driving on the highway and your air compressor is starting to leak pressure into the coolant system or goes bad or an injector cup starts leaking pressure into the cooling system, it’ll blow at the weakest point, those lines with just clamp. Coolant also lubricates, so that hose can slide off the def doser or frame mounted coolant splitter. Your truck, your call though if you wanna save a few bucks for a cheeseburger.
@@AdilAdil-y2t This truck has been running with these mods for 5 years now. Zero issues. Many owner ops that found this video reached out to me and said they broke down on the side of the road and were able to fix their truck themselves and keep rolling.
The def doser coolant hose nipple pipes have a step that the quick connect fitting locks on to, that’s what keeps the coolant hoses from popping off the def doser. If you just put a hose straight to that fitting with a hose clamp, under pressure it could potentially slide off. Those fittings on the doser measure 10mm so 3/8” hose should fit. Long term use, if your trucks are running local and come back to the yard every day, straight hose might work for years, might slide/pop off weeks later. Over the road/Regional I’d definitely upgrade it with the new quick connect fittings so they can lock on correctly. In an emergency or in a pinch, like I mentioned at the end of the video, you can temporarily bypass those hoses at the coolant block by the egr cooler, you could just run a piece of 1ft hose and loop it right there, with a hose clamp or 2 to be safe, straight with no quick connect fitting, just be aware they could blow off under pressure and you’ll be back under there fixing them after you lost all your coolant on the side of the road. Fixing it yourself at your own shop/yard is definitely better then paying a $2000 Tow truck bill or $800 to a road service guy to come out and do a patch job at 1am. Thanks for watching Bro. I hope I earned your subscription.
@@fcoanaya5762 Yes, at the terminal block bolted to the frame by the Egr cooler. You can remove the push lock theaded fitting, go to a hardware store and find a bolt with the same thread pitch, and install a bolt with a sealing washer.
My 2011 VNL has steel lines with heavy duty hoses connected to them on each end. After 12 years they still look good and they will last lifetime of truck there is no way they brake any soon. Looks like never models have cheap plastic lines I feel sorry for those.
Wow this video is excellent. It doesn't get any better than this . I'm going to replace these hoses the same way you did it. Thank you
I appreciate the feedback Bro. I’m new to UA-cam but I tried to make this video the best I could with part numbers and explanation. I want to help out my fellow truckers that work on their own fleet of trucks. I have a lot of footage of many different How-to videos coming soon. Thanks for watching and I hope I earned your Subscription!
my connector broke off and between plastic and rubber hose , last night , I must say it is a challenge to patch it up without proper parts, I used an airline to connect between the lines and some clamps, took me 3 hours, at 32F raining/snowing. Great Video I wish I came across it earlier , definitely subscribing
Man you saved me bunch money these tubes on volvo break so easy i am getting ready to replace it now
Thank you for your time watching my video! I hope all of my videos can help fellow truckers save $$$ and keep their truck rolling. I have many videos coming out soon!
Awesome man. Cant go wrong with eliminating points of failure
Amazing video brother, those hoses caused me two bad break downs in two different trucks, real issue.
Hey man thanks for video did same exactly with coolant hosetook me 2.5 hours to get on the road appreciate 👍💪
I have replaced all of these intersections with rubber and clamps. The 5/16 shark bite fittings work great.
The plastic coolant lines were the worst idea ever. They're constantly shattering
I agree, definitely a very poor design. They should have a lifetime recall on those lines. Thank you for watching!
Man, u good. Excellent 👍🏾👍🏾 Thanks! Plz do more videos like this. Very informative & easily understood
Thank you so much for detailed explanation!!!
Wish i would have saw this video 2 days ago. Thank you sir it's good for future reference!
Thank you for watching! Hope you liked the video and consider subscribing to my channel, I have a lot of great videos coming soon, on everything from how-to, after treatment faults, and more.
May I ask if this blue tube is 5521 or 5526? What is the difference?
5521 is green 5526 is blue, they are thr same just different exterior color. For this upgrade you will need 3/8” Inner diameter. Thanx for watching!
yes sir. i have broken those hoses two times. and lost all the coolant two times. In raining days the hoses broken because the cold water of the road touch the heat old plastic and crack.
@@Eldelvolvo thank you for watching. I think it is a poor design.
Nice little job, I’m familiar with it, you jumped on ahead and replaced them, fantastic, you know sometimes the dealer doesn’t have them an you got to wait for days, 👋👍👌✌️
Thank you 🙏🏾 brother…. This video was everything 🤲🏾
Thank you for watching Brother
Very helpful..!!
I recently clean my 1 box including dpf filter and also change temp sensor and soot sensor but yesterday pop up SCR malfunction on screen so what we need to do now it's wiring rub issue or anything else ? It's come every morning but after 1 hour it's gone.
Am not seeing anything that says like inlet or outlet So how do i know which line goes to which pipe
in either order, the coolant flow isn't directional. Thanks for watching!
To patch it off to loose your coolant if it happens to anyone. If tou happen to have the drain hose. Cut a peace 4 to 5 inches. Connect both ends to the plastic tubes to close the system make it a one hose no leaks. Use clamps or zip ties. Make it off the highway.
Good information God bless you thanks
Excellent!!!!! Thanks so much for this!
Do you know if anyone make those plastic connectors in metal or the nipple part that goes inserted into the hose. These plastic ones always brake after a while.
I’ve never seen these quick disconnect connectors in metal, only plastic. The way that I did it in this video, these coolant lines will always be serviceable and quickly repaired by you anywhere. The tow man and roadside service guys wont be able to take advantage of you.
Thank you man save me a lot
Great video!!
Thanx for watching!
Bro dam good video. Thanks
Thanks for this..
thank you very much for the details
Thank you for watching Brother
Drop that link for the hose
Where did you buy the hose from?
Very good made video
❤❤❤❤respect.
Volvo quoted Me $250+ just for the lines that connect to the doser unit. Just the 2 rubber end lines alone.
Where did you buy the blue hose ?
You can find it on ebay the cheapest
Where did you get 2 ply coolant hose so cheap?
You can find it on ebay the cheapest. I use about 14 ft of hose on these Volvos with a D13 engine.
I REMOVED ALL HOSES PLASTIC PIPES AND THE CONNECTOR AND REPLACED THEM WITH SILICONE HOSES AND STAINLESS STEEL CLAMPS FOR APPROXIMATELY $ 120.00
Great to save $$$ and upgrading the lines! Thanx for watching!
So you can just use clamps to connect on both ends right? no need for the plastic quick connects?
@@tubeup the plastic connectors have that ridge that helps keep the hose from coming off. The coolant system has pressure, and if you’re driving on the highway and your air compressor is starting to leak pressure into the coolant system or goes bad or an injector cup starts leaking pressure into the cooling system, it’ll blow at the weakest point, those lines with just clamp. Coolant also lubricates, so that hose can slide off the def doser or frame mounted coolant splitter. Your truck, your call though if you wanna save a few bucks for a cheeseburger.
@@DurangoExpressTrucks thanks i appreciate it i still cant find those breeze #8 clamps do the clamps have to specifically be 3/8”
How is it holding up any issues so far ?
@@AdilAdil-y2t This truck has been running with these mods for 5 years now. Zero issues. Many owner ops that found this video reached out to me and said they broke down on the side of the road and were able to fix their truck themselves and keep rolling.
Mine just brokw..on the side of the road..where did you get hose? Tnx
I got mine on ebay, but you should be able to find some at a place that sells heavy truck parts.
❤️
Show ur work .
@@joseplascencia4408 what work?
Why didn't you show how to remove hose?
Quick question brother .can i use the hoses straight with no connectors ?
The def doser coolant hose nipple pipes have a step that the quick connect fitting locks on to, that’s what keeps the coolant hoses from popping off the def doser. If you just put a hose straight to that fitting with a hose clamp, under pressure it could potentially slide off. Those fittings on the doser measure 10mm so 3/8” hose should fit. Long term use, if your trucks are running local and come back to the yard every day, straight hose might work for years, might slide/pop off weeks later. Over the road/Regional I’d definitely upgrade it with the new quick connect fittings so they can lock on correctly. In an emergency or in a pinch, like I mentioned at the end of the video, you can temporarily bypass those hoses at the coolant block by the egr cooler, you could just run a piece of 1ft hose and loop it right there, with a hose clamp or 2 to be safe, straight with no quick connect fitting, just be aware they could blow off under pressure and you’ll be back under there fixing them after you lost all your coolant on the side of the road. Fixing it yourself at your own shop/yard is definitely better then paying a $2000 Tow truck bill or $800 to a road service guy to come out and do a patch job at 1am. Thanks for watching Bro. I hope I earned your subscription.
@@DurangoExpressTrucks thank you so much man .that is very helpful yes definitely new subscriber.
If my def is delete can I just plug these hose?
@@fcoanaya5762 Yes, at the terminal block bolted to the frame by the Egr cooler. You can remove the push lock theaded fitting, go to a hardware store and find a bolt with the same thread pitch, and install a bolt with a sealing washer.
@@DurangoExpressTrucks thank you much for your information. Appreciate it.
My 2011 VNL has steel lines with heavy duty hoses connected to them on each end. After 12 years they still look good and they will last lifetime of truck there is no way they brake any soon. Looks like never models have cheap plastic lines I feel sorry for those.
Какой же ты нудный.