Doing the install on a 19 700r. Ais is deleted. Can I use the supplied y fitting to catch the crank case breather and throttle body port from bottom fitting on intake tube? And plug the top fitting on intake tube? This is an air box set up.
I completely agree man I work on a lot of Hondas for people and it has gotten to the point where I tell them to make sure it’s clean before you bring it in otherwise I don’t wanna work on it yeah they will not let customers bring me parts at all because I do a lot of rebuilds and bottom ends, and people like to bring in wrench rabbit kits or just cheap hot rods junk in general. Also another one that you didn’t touch on is when people bring you stuff in don’t get it done right away leave it sit in the shop
My Raptor came without lights, what led lights would you recommend to mount on my 16 700r? I want to use the handle bar light switch still but don’t want mess it all up.
I use NGK iridium version myself of stock variety. It starts quicker (easier on starter) & lasts longer in bike. Non iridium is fine too. NGK iridium is just better.
How about notching the piston for the valves? Some of us live far and have to order parts online. I live overseas and order most of the parts from the US.
@@JAGMotorworks his point is that some online sellers don’t care about fitment issues and don’t tell you any details and it’s absolutely correct. While when you buy through installer, it’s a piece of mind for you as a user because if the part doesn’t fit, it’s not your problem and the installer has to correct it with no additional expense on your shoulder.
Understood. What I'm telling you is don't order the wrong piston and try to cut it when you can order the right one. 😉 Call Mr Cuervo and he most likely can send you the right piston for your application.
Maybe refer all customers to a checklist of the biggest things you just went over. Not everyone has the common sense..that’s just a fact and it translates to every faucet of life.
Love these recommendation videos ! My '21 Raptor 700R-SE is my dream quad. Mostly stock. Want max durability/longevity/performance in that order. -Ohio #MaximaOils
Doing the install on a 19 700r. Ais is deleted. Can I use the supplied y fitting to catch the crank case breather and throttle body port from bottom fitting on intake tube? And plug the top fitting on intake tube? This is an air box set up.
@cuervoATV Where is your shop located?
Your a great guy daniel. Have helped me over the phone a lot and I appreciate it and ty for the monster exhaust she sounds amazing.
He is the best. He helped me get mine going after starting to order parts from him. I will never not buy parts from him anymore
I wonder if ur talking about BP racing because that same thing happened to me...
Hopefully you still want me as a customer. Your help has been invaluable.
I completely agree man I work on a lot of Hondas for people and it has gotten to the point where I tell them to make sure it’s clean before you bring it in otherwise I don’t wanna work on it yeah they will not let customers bring me parts at all because I do a lot of rebuilds and bottom ends, and people like to bring in wrench rabbit kits or just cheap hot rods junk in general. Also another one that you didn’t touch on is when people bring you stuff in don’t get it done right away leave it sit in the shop
Good pts. Use OEM or Wiseco only for best longevity!
When you think of building a raptor in this country curvo racing comes to everyone's mind you guys are rated the best hands down💯💯💯💯
Thanks you for the compliments! We strive for the best, in that Honesty is always first priority , then durability and performance!
Yes for sure! Where are you located Dan?
My Raptor came without lights, what led lights would you recommend to mount on my 16 700r? I want to use the handle bar light switch still but don’t want mess it all up.
Dan, what is the best spark plug "all around" for my stock '21 Raptor 700R-SE? Reg NGK CR8E or iridium version?
I use NGK iridium version myself of stock variety. It starts quicker (easier on starter) & lasts longer in bike. Non iridium is fine too. NGK iridium is just better.
What do you think is a good cleaner is
Hola me gustaría contactarlos , para un estimado de un mod map para Yamaha Raptor 700 r 2006
Some people don't realize they might get turned down the next time. I'm glad you said that
lololool Yes yes yes to all that you say! Much agreed! I love the customers that state they could do it themselves and it doesn't take that long.
Can I trade a used laptop and make payments on my engine build? lol
That's it .......I'm taking Jose a dozen of 🌹 every time I take my bike.....happy mechanic faster bike
Lol!
How about notching the piston for the valves?
Some of us live far and have to order parts online. I live overseas and order most of the parts from the US.
Yes its possible but only if the piston has a thick enough dome
You could get the right piston online too
@@JAGMotorworks his point is that some online sellers don’t care about fitment issues and don’t tell you any details and it’s absolutely correct. While when you buy through installer, it’s a piece of mind for you as a user because if the part doesn’t fit, it’s not your problem and the installer has to correct it with no additional expense on your shoulder.
Understood.
What I'm telling you is don't order the wrong piston and try to cut it when you can order the right one. 😉
Call Mr Cuervo and he most likely can send you the right piston for your application.
All of those should go without saying , but some people I tell you.
Maybe refer all customers to a checklist of the biggest things you just went over. Not everyone has the common sense..that’s just a fact and it translates to every faucet of life.
Well said !
aww dang i know what company and piston your talking about glad i don't get anything from them anymore live and learn i guess
Love these recommendation videos ! My '21 Raptor 700R-SE is my dream quad. Mostly stock. Want max durability/longevity/performance in that order. -Ohio #MaximaOils