Female living in a van.. 3 weeks and 5 mechanics... couldnt fix. Found your video by searching flashing battery... did what you said and it started right up. Man could I kiss you right now. You may want to add in your video, that if somebody has a rotory dial starter and it's flashing 1 red light... there is no way to change it to 12 vts... so bought a digital display on Amazon,switched it and plugged it in and was able to make it work. You're a life saver ❤️💕
I am in a truck in north minnesota with temps -21 and had this problem, tried everything and was about to give up when i saw your vudeo. Sir you saved my life for i can sleep warm tonight. Thank you so much man. 🤜🏿🤜🏿🤜🏿
Thank you so much Mark for your short but extremely valuable video....female living in camper van on her own here....hey but still needed a man and you are the man Mark...thank you once again so so much
Thank you very much.. My heater is working again after buying a replacement screen off ebay :) The book said flashing battery was because of too much power ( my voltage is 13v average when charged at night after a good day on solar so thought about getting a 12v regulator lol )
Your'e a life saver, spent several hours trying to suss this out, had 13.5 volts on the display so the error code didn't make any sense until I saw your post, thanks a lot now all working fine !
I love you I love you I love you. I've been working on this heater for hours not figuring out why I was getting a E1 code which was low power... Thank you so much ❤️
Hi mate I started getting the e-01 flashing battery, I id as you said but when I got to volts bit it was already set to 12v? So I changed it to 24 then back to 12, after 6 attempts it fired up. Now if I leave it A week or 2 I have to do the same thing every time. it’s 3months old, do you think it a faulty monitor should change the monitor?
Right then just try running yr engine on van then firing it up . If it fires up you either av a low battery on van or a bad earth so check them to if no joy , this is something I've come across , in past
@@markwrenn3882 hi sorry your I dint see your last message, iv a t5 and the battery’s are shite for holding power so I always start the van first to fire up the heater, . When you say wires not thick enough which wire?
@@markwrenn3882 Yes I did I just wanted to make sure, I've got the same issues with mine. It's as if I've got an electrical feed problem low power battery flashing , then the bloody screen goes blank then it comes on again bloody nightmare.
@@derrickmccune6376 well mate you need a new glow plug most I think come with the tool to swap it out. Available off Ebay. Is it new and dosnt work or as it gone down over time .?
@@derrickmccune6376 if it's not the problem in the video I dont know all i can say is voltage setting . 12v or 24v and check your diesel line is pumping fuel. If you are using the tank they supply loosen the cap or tank it off. As I ad a similar problem and it was because no breath hole in the tank
Female living in a van.. 3 weeks and 5 mechanics... couldnt fix. Found your video by searching flashing battery... did what you said and it started right up. Man could I kiss you right now. You may want to add in your video, that if somebody has a rotory dial starter and it's flashing 1 red light... there is no way to change it to 12 vts... so bought a digital display on Amazon,switched it and plugged it in and was able to make it work. You're a life saver ❤️💕
Glad I was a help I'll accept yr kiss xx
I am in a truck in north minnesota with temps -21 and had this problem, tried everything and was about to give up when i saw your vudeo. Sir you saved my life for i can sleep warm tonight. Thank you so much man. 🤜🏿🤜🏿🤜🏿
Thank you so much Mark for your short but extremely valuable video....female living in camper van on her own here....hey but still needed a man and you are the man Mark...thank you once again so so much
Thank you so much. So helpful and so happy to have heat again in my van
Thank you very much..
My heater is working again after buying a replacement screen off ebay :)
The book said flashing battery was because of too much power ( my voltage is 13v average when charged at night after a good day on solar so thought about getting a 12v regulator lol )
Thanks mate... that was a great help. 👍
Your'e a life saver, spent several hours trying to suss this out, had 13.5 volts on the display so the error code didn't make any sense until I saw your post, thanks a lot now all working fine !
Cheers Mark, been at this all day, would never have figured that out, STAR!!
I love you I love you I love you. I've been working on this heater for hours not figuring out why I was getting a E1 code which was low power... Thank you so much ❤️
Hi other Mark, thanks a lot! Got heat again after a battery failure and controller reset!
Glad to help
So so so useful thank you so much. Was wondering what was going on all day. Cheer mate
Little beaut of a vid!
Thanks, bro...you’r my savior
Cheers dude
Thank you very helpful ✌✌
Secret code is god send legend mark
Your a genius.... have another beer on me!!
Hi mate I started getting the e-01 flashing battery, I id as you said but when I got to volts bit it was already set to 12v? So I changed it to 24 then back to 12, after 6 attempts it fired up. Now if I leave it A week or 2 I have to do the same thing every time. it’s 3months old, do you think it a faulty monitor should change the monitor?
Right then just try running yr engine on van then firing it up . If it fires up you either av a low battery on van or a bad earth so check them to if no joy , this is something I've come across , in past
Try goin straight to battery for power , also try running your engine on vehicle if it fires you may have a wire gauge problem (wires not thick enough
@@markwrenn3882 hi sorry your I dint see your last message, iv a t5 and the battery’s are shite for holding power so I always start the van first to fire up the heater, . When you say wires not thick enough which wire?
@@markrobinson8575 the wires from the night heater rèd+ and black- go straight to battery dont drop in size from the orignal wires
@@markwrenn3882 ok so get thicker night heater terminals
Or maybe the battery is no good ?
If it's starting ok that should be the case . Its always best to av a volt meter Plugged in somewhere
1:08 Did ya mean I bet it's on 24v
Yes mate but I bet you got the drift
@@markwrenn3882 Yes I did I just wanted to make sure, I've got the same issues with mine. It's as if I've got an electrical feed problem low power battery flashing , then the bloody screen goes blank then it comes on again bloody nightmare.
@@UKvet246 av you swapped display or disconnected battery .or reset it ?let me know how you go on
@@markwrenn3882 Yes I've been setting up a temporary feed before final electrical fix.
@@markwrenn3882 Hi Mark, yes it was set on 24v re set it to 12v and it's working fine. Thanks for your help.
E 03 what's the problem?
Iam not a expert but it solved the problem
Glow plug failure, same problem I'm having, and I've been trying to get this thing to work for almost 2 weeks now !!!!
@@derrickmccune6376 well mate you need a new glow plug most I think come with the tool to swap it out. Available off Ebay. Is it new and dosnt work or as it gone down over time .?
Brand New ! just got it about 2 weeks ago, I NEED this thing to work !!! I race snowmobiles, and NEED HEAT in my trailer !!!!!
@@derrickmccune6376 if it's not the problem in the video I dont know all i can say is voltage setting . 12v or 24v and check your diesel line is pumping fuel. If you are using the tank they supply loosen the cap or tank it off. As I ad a similar problem and it was because no breath hole in the tank