Built a 12kw clone this last summer, wish I had your video at the time. Couldn't figure out a good setup for fenders until I saw your setup - pretty simple and effective. Either way I'm on 1300 miles and LOVING this bike. Appreciate the time you took to put this out, keep it up!
Step 10. It's very important to apply some lock tight on the screws. I use stronger than the blue one. When a screw pop out after hard breaking it damage or severe the motor cable. It happened to me 3 times on 2 of my bikes.
@@alexchavosaurus9041 It's repearable. You can replaced the cable. I never did it myself but I saw videos and it's not too dificult. I mean for me since I openned up a lot of motors and did other repears like replacing halls sensors.
@@VideoLeakPolice I have one opened up stripped down to the motor itself. and another waiting to get stripped down.. Living without a garage/ proper workspace has its ups and downs also :D
Great Video! Thanks for being Open Source. When lining up the side panels I have use two long studs or bolts with the heads removed threaded in the frame, the side panel hangs on the long studs till the rest of the bolts are threaded in. Great Magnet ideal.
*Very nice video* for the seat it will cut circulation off to your balls, I modified mine, get longer bolts and put washers in between top 2 bolts to change angle of seat 1” usually and perfect, also you can put a enduro seat with some simple modifications if you need your balls lol but seriously it’s a great modification! The motor cable he spoke of is probably most over looked so great job, if that cable rubs on the rotor you’ll be buying a new rear hub motor! Bakes you may need to adjust few times or bleed air out, I bought a ebike hydraulic brake bleed kit! Great item to have. I got slightly over 5k miles on my bike in 1 yr so Im trying to help here I think this is a great video just to be clear. I would not use all that caulk it’s going to be extremely difficult to remove and you’ll actually get moisture if you leave bike inside air conditioned home then go ride in summer my experience and vise-versa from heat to cold, I never ride in rain and my bike is fine no caulk my sabvoton control is actually under the seat they sell a mount box that bolts underneath just fine, if you want keep battery from getting wet just don’t ride in rain or use very thin rubber gasket self adhesive 1/4” wide or trim smaller is ok. Again just trying to help guys! FYI riding on roadway cars will 100% pullout on you etc so be extremely vigilant and put set mirrors on it! Definitely mandatory if you want to live, I had a truck hit me a few days ago he didn’t have his blinker on was going straight thru intersection then abruptly turned right into me “while riding the shoulder of road” going 15 mph, I was watching and saw him start to turn so I was ok but you gotta pay attention 1000% and just a tip I use brush guards on all my bikes to protect my hands ( gloves of course) when this truck turned into me he hit my handlebars first and they kept me from losing control etc so something to consider, as a note I’ve rode motorcycle 45yrs so but what matters is really paying attention do not assume anything, last month a elderly lady ran a intersection jumped curb knocked down street signs and almost ran me over but I saw her, what I’m saying is pay attention guys don’t think it could never happen, if you ride long enough you’ll understand what I’m saying, and if you have kids don’t let them ever ride along a highway, again if you ride long enough you’ll see why I’m saying this, people just don’t pay attention they’re distracted on cell phones most of the time, one more thing but a set of led rechargeable blinking light, red rear/white front, be safe out there people.
Amazing value packed comment!! Thank you so much you are definitely right ! Love the tip on the seat adjustment we've noticed it is angled pretty high and that is definitely an easier mod than what we had in mind 😀👍👍👍
Exactly. I see guys using these highly illegal off-road bikes on the street like they are legal. Wait until someone dies and then the lawmakers will start to ban e-bikes. They will either ban, ticket or start charging fee's to own. I have a simple 20mph e-bikes that looks like a real bike. This thing is nothing more than an electrified motocross motorcycle. If they take it off road...cool. But riding 50mph+ on streets is not right.
the kits say that tires aren't included, what size is the rim for both rear and front? do you use motorcycle tires? seems like a fun little project to make something to ride into work on.
@ElectricBikeLaboratory thanks for the reply. I'll have to see about ordering one of these kits. Built my own fat tire ebike, so it should be even easier the second time. Do the kits include the diy spacers you made? I don't have a 3d printer, so coming up with solutions on the fly aren't as easy for me. And thanks again for the video, I'll be referring to it in the future I'm sure.
Can I get site for front turn signal bracket and lights I already have front light came with bomber clone. And where can I get the stock replacement tail/brake/running / turn signal light. That frame sucks, I need to know how toset up savington 72v 150/350 controller. And transfer all parts to new frame. The original frame broke almost killing me causevthey don't weld there frames, whole bottom frame where swingarm connects ripped right off. Thx for any help
It's a nice build, but by buying all those parts individually you will pay more than just ordering one off Alibaba, which I did ( and yes, HIGH-QUALITY). everything on this bike is almost the same except mine is a 95 mph (GPS) 15,000Kw 49Ah Samsung cells, 200amp Sabvatron controller, moto seat, KKE forks, and leather grips, all for $3300 to my door from (Domain electric bike company in China) bought in February and arrived May 12 only because it was a custom order.
Can you share where you purchased that and which seller? As much as I want to save some money or at least not spend it all at once, you way sound mucb better.
@@ryanshane455 My sales agent is Winni J, Changzhou Domain Electric Bike Co.. Still, you have to keep in mind that I bought mine in (mid-January before these really got popular) so I'm sure the prices have increased significantly because of those US tariffs on CHINA by now.
Just enough for the nut to fully thread on basically , but yes it's basically just enough. There are other model (more expensive) motors like QS273 or a more rare QS205 that have a longer axle length that allow for the nut + a lock nut to fully seat. A very good observation on your end ! Thank you for pointing it out 😊👌
Very interesting video! But if possible I would recommend to install the motor so that the wire is facing down. Then the water will not go to the motor so easily.
Yes you are indeed correct , in this case the motor cable is actually not quite long enough for these MXUS 3K Turbo motors. The proper place is to go below and we did try that first but then we couldn't connect to the controller inside. It is an excellent point and I thank you for addressing it ! :)
i was thinking about buying one would i need to buy any wiring or anything and for the connecting the handlebar cables im confused where did the other wires come from are those from the controller
can you change the size of the free wheel like people with surrons do to there sprocket for mid mount motors? will it do the same thing and change the top speed or acceleration depending on which way you wanna go?
Nice video, tiny things like putting lock washers or regular washers on bolts. Getting proper size quality bolts also kinda must do, the chinese ones can snap, wear threads out or come loose. Maybe those could be made as a kit for upgraded bolts and nuts
Very true. We're selling a few kits right now and throwing in all of the proper sized bolts, doing the first one kind of sucked lol having to find out what size bolt was needed. I appreciate the comment! Yes there are definitely improvements that can be made to the way we assembled it. Lock washers / regular washers is a great start for us 👌
Thank you! I've been looking for these wedge screws on the internet for the last 20 minutes with no luck , we pulled them off of another set of bike fenders. I'll keep looking and message here when I find them 😊
¡Hola! Mido 5 pies y 11 pulgadas y la bicicleta me queda bien, creo que la altura del asiento es de aproximadamente 33 pulgadas (84 cm) más o menos. ¡Espero que esto ayude!
I'm very new into this and, I'm used to hooking up car stereos and amplifiers but I was wondering, to extend the battery life could you put a battery capacitor like in the battery compartment just right in front of the battery and hook it up in a parallel sorry. Or is it just not compatible like that.
8000W motor usually is the QS273 which is a BEAST of a motor. Hubsinks and statorade can run it to 20KW. These ones are an MXUS 3K Turbo motor, good for 3KW-5KW and up to 8-10KW with statorade and hub sinks. Hope you're enjoying your bike! Must be fast!!
Most likely in Spring , I believe you are on our waiting list so stay tuned! We will likely have a couple that we can put together before spring as well!
@@ElectricBikeLaboratory Bro estoy enamorado de ella 😍👍 Soy de cucuta N.S / Colombia. sabes de alguna forma por la cual la pueda tener. Gracias por tu respuesta 😃👍
¡Muchas gracias! Si pudiéramos enviarle lo haríamos, pero está un poco lejos 😂 Su mejor opción es obtener el marco y comenzar desde allí, ¡debería poder comprar un marco en Aliexpress / Alibaba por un precio razonable! A partir de ahí puedes reconstruirlo 👌👌🤙🤙
good afternoon. I watched your video. you buy an electric bicycle. I really want you to put together in this video. how much is the price col for such a thing? . but I need a nominal 8000 watt or even 12000 watt ☝👍
QS273 will likely be the motor you use , and probably Sabvoton 75150 or 75200 controller. It may be best just to buy a built bike from Alibaba for Latvia
@@ElectricBikeLaboratory Meklēšanas rezultāti Tulkojuma rezultāts Latviešu Angļu Vai domājāt: Paldies kad atbildejat. man obligati vajag 12kw elektrovelosipedu. varbut jus ziniet alibaba vares nosutit uz latviju elektrovelosipedu ja es pasutišu alibaba? Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?
@@ElectricBikeLaboratory Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?
I'm guessing it's not one of our kits , lights can be a pain which is why we opted for this plug and play system . Sounds like either the power feed or ground feed running to your switch has a broken wire and some kind of break in the line. Check those first !
Deciding between QS205 + ferrofluid / heatsinks of QS273. Really hate the weight of the 273, the bikes are heavy enough. The 205s can do 10KW which is plenty but the 273s are pretty bulletproof even without mods, tough call!
hi whats on my mind is a bike that i can take to work, detach battery for charing in an apartment, and breaks/suspension that can hold about 300lbs (id like to be able to take myself 150 and my partner 120 on short trips (3mi round trip), is there a bike that can do this? been looking at the radrunner 3 for this
No one had any issue with the battery "mount"? Those foam tape strips aren't going to hold 40lbs in an accident. I don't believe it was stated in the vid what the power of the controller was but the wire coming out of the xt90 adapter cable to the battery looked comically undersized. Might work for 3kw. If this is an 8kw+ build those wires are going to get toasty. The foam tape being the batter retention mechanism was the craziest part.
Hey brother looking at mounting the front fender but can’t seem to find anything like that wedge hole with the wing nut, any chance you know where I could get it? Or did you just fabricate it?
That is the question we seem to be getting they actually came with our other fenders and we just stole them off there, but a 3D Printed variant is on the to-do list for us!
Around 100km on throttle and never tested pedal assist alone :P I would think something like 200-300km though depending on how fast you're going, usually PAS is at lower speeds
@@ElectricBikeLaboratory realy awsome ! its a good deal, what about your geography location ? its like.. flat geography or many hills in the city like around area ? Thanks a lot buddy and have a nice week !
The nice thing about them is they can be bought in pieces as you have the funds , all at once can feel pretty expensive, most of the cost is in the battery
When you placed the front fender on what is the exact name of that wedge bolt you used I'm trying to search for it Please and thank you 🤘🏾 killer build can't wait for mine to come in the mail
The frame joints don’t look like they will hold very well. I’ve purchased a 60v scooter off of alibaba for $1600 and the frame failed due to metal fatigue. I absolutely see this happening to this stealth bomber clone.
So far we've built about 20 of these and none of them have failed at the frame. They're possibly overbuilt (very heavy). But in any case it is a good thing to watch out for!
Uses" Chinesium bolts". Uses a spacer on the brakes. Doesn't use longer bolts to secure the brakes disc. Locktite is no substitute for thread engagement. FAFO
Hey thanks for the comment! We switched to longer bolts for the brake discs, and the spacers for the rotors are aluminum. Great catch though on your part 😉
Built a fake myself it was fast with terrible brakes fake shocks front and back. I honestly think these copy cat manufacturers could build a brand themselves instead of being invisible. What I am saying is they are so often invisible when it comes to after sales.....
Just looked it up and Talaria XXX is $4000CAD and only includes 60V 25AH Battery, 47 mph top speed The one in this video is currently $3500CAD and has 72V 55AH Battery, which is more than 2.5X the amount of battery, and can do up to 50mph. Talaria XXX is a sweet bike, but facts are facts. More expensive and same speed if not slightly slower, and a battery that is 2.5x smaller. Maybe you can clarify if I have something wrong here?
Are you stunned? Do the CAD to USD conversion and look at the speed conversion as well that's DOUBLE the battery. I can't stand that Americans don't know math...
stealth bomber showed up at my local track I own a mx4,xxx, and pro ss when I gave it a try it was shit sorry I'd rather ride xxx over stealth bomber anyday anyone that rides dirt bikes will feel the same sorry.
Couldn't agree with you more. I have 2 Surrons and a Talaria MX3 , we've never brought a Stealth Bomber to an MX track, it's not made for it at all. It's made to ride the roads and occasional light trails in complete silence (hence stealth) , anything with a heavy hub motor is not an off road machine.
The 2 are totally different like what bro😂😂 ones for dirt tracks ones for pavement commuting. Here in Chicago I'd take the bomber all damn day over xxx.
Built a 12kw clone this last summer, wish I had your video at the time. Couldn't figure out a good setup for fenders until I saw your setup - pretty simple and effective. Either way I'm on 1300 miles and LOVING this bike. Appreciate the time you took to put this out, keep it up!
Thank you!! 12KW must be great fun 😊👌👍
What's the meaning of clone??
Where'd you get the clone?
Step 10. It's very important to apply some lock tight on the screws. I use stronger than the blue one. When a screw pop out after hard breaking it damage or severe the motor cable. It happened to me 3 times on 2 of my bikes.
Wow that's an excellent point !! Thank you very much for noting it :)
I experienced the same thing. Went through three motors already.
@@alexchavosaurus9041 It's repearable. You can replaced the cable. I never did it myself but I saw videos and it's not too dificult. I mean for me since I openned up a lot of motors and did other repears like replacing halls sensors.
@@VideoLeakPolice I have one opened up stripped down to the motor itself. and another waiting to get stripped down.. Living without a garage/ proper workspace has its ups and downs also :D
@@alexchavosaurus9041
I understand.
Great Video! Thanks for being Open Source.
When lining up the side panels I have use two long studs or bolts with the heads removed threaded in the frame, the side panel hangs on the long studs till the rest of the bolts are threaded in. Great Magnet ideal.
This has me wanting to build my own.
*Very nice video* for the seat it will cut circulation off to your balls, I modified mine, get longer bolts and put washers in between top 2 bolts to change angle of seat 1” usually and perfect, also you can put a enduro seat with some simple modifications if you need your balls lol but seriously it’s a great modification! The motor cable he spoke of is probably most over looked so great job, if that cable rubs on the rotor you’ll be buying a new rear hub motor! Bakes you may need to adjust few times or bleed air out, I bought a ebike hydraulic brake bleed kit! Great item to have.
I got slightly over 5k miles on my bike in 1 yr so Im trying to help here I think this is a great video just to be clear.
I would not use all that caulk it’s going to be extremely difficult to remove and you’ll actually get moisture if you leave bike inside air conditioned home then go ride in summer my experience and vise-versa from heat to cold, I never ride in rain and my bike is fine no caulk my sabvoton control is actually under the seat they sell a mount box that bolts underneath just fine, if you want keep battery from getting wet just don’t ride in rain or use very thin rubber gasket self adhesive 1/4” wide or trim smaller is ok. Again just trying to help guys!
FYI riding on roadway cars will 100% pullout on you etc so be extremely vigilant and put set mirrors on it! Definitely mandatory if you want to live, I had a truck hit me a few days ago he didn’t have his blinker on was going straight thru intersection then abruptly turned right into me “while riding the shoulder of road” going 15 mph, I was watching and saw him start to turn so I was ok but you gotta pay attention 1000% and just a tip I use brush guards on all my bikes to protect my hands ( gloves of course) when this truck turned into me he hit my handlebars first and they kept me from losing control etc so something to consider, as a note I’ve rode motorcycle 45yrs so but what matters is really paying attention do not assume anything, last month a elderly lady ran a intersection jumped curb knocked down street signs and almost ran me over but I saw her, what I’m saying is pay attention guys don’t think it could never happen, if you ride long enough you’ll understand what I’m saying, and if you have kids don’t let them ever ride along a highway, again if you ride long enough you’ll see why I’m saying this, people just don’t pay attention they’re distracted on cell phones most of the time, one more thing but a set of led rechargeable blinking light, red rear/white front, be safe out there people.
Amazing value packed comment!! Thank you so much you are definitely right ! Love the tip on the seat adjustment we've noticed it is angled pretty high and that is definitely an easier mod than what we had in mind 😀👍👍👍
Nice! I'm liking everything you guys are putting out for content
Well thank you very much ! Let us know what you'd like to see ! :)
Can I get site for bearing stemset? And sitexfor front bracket and lithtscplug and play? Thx
Do you think you should take this on bicycle/hiking trails? Why does this thing even have peddles?
Exactly. I see guys using these highly illegal off-road bikes on the street like they are legal. Wait until someone dies and then the lawmakers will start to ban e-bikes. They will either ban, ticket or start charging fee's to own. I have a simple 20mph e-bikes that looks like a real bike. This thing is nothing more than an electrified motocross motorcycle. If they take it off road...cool. But riding 50mph+ on streets is not right.
the kits say that tires aren't included, what size is the rim for both rear and front? do you use motorcycle tires? seems like a fun little project to make something to ride into work on.
Yes we have both 26" bike tires and 18" / 21" motorcycle wheels, this build is using motorcycle wheels and dual sport Shinkko SR241 tires :)
@ElectricBikeLaboratory thanks for the reply. I'll have to see about ordering one of these kits. Built my own fat tire ebike, so it should be even easier the second time.
Do the kits include the diy spacers you made? I don't have a 3d printer, so coming up with solutions on the fly aren't as easy for me.
And thanks again for the video, I'll be referring to it in the future I'm sure.
Thank you! And yes the spacers are included with these kits
Can I get site for front turn signal bracket and lights I already have front light came with bomber clone. And where can I get the stock replacement tail/brake/running / turn signal light. That frame sucks, I need to know how toset up savington 72v 150/350 controller. And transfer all parts to new frame. The original frame broke almost killing me causevthey don't weld there frames, whole bottom frame where swingarm connects ripped right off. Thx for any help
16:23 where did you get that swing arm bearing ? mine needs to be replaced and cant find it anywhere
I was looking for a Canadian place to order my parts!!! So glad you're an option!
This is amazing. I love the work you guys do and I love that you guys put in the extra effort for the customer your all amazing
Thank you very much!!
You forgot to send me a free kit. Looks fun.
Lol whoops! Thank you! Lots of fun :)
Wow, that's a kickass looking bike!
Thank you very much ! 😁
It's a nice build, but by buying all those parts individually you will pay more than just ordering one off Alibaba, which I did ( and yes, HIGH-QUALITY). everything on this bike is almost the same except mine is a 95 mph (GPS) 15,000Kw 49Ah Samsung cells, 200amp Sabvatron controller, moto seat, KKE forks, and leather grips, all for $3300 to my door from (Domain electric bike company in China) bought in February and arrived May 12 only because it was a custom order.
Can you share where you purchased that and which seller? As much as I want to save some money or at least not spend it all at once, you way sound mucb better.
@@ryanshane455 My sales agent is Winni J, Changzhou Domain Electric Bike Co.. Still, you have to keep in mind that I bought mine in (mid-January before these really got popular) so I'm sure the prices have increased significantly because of those US tariffs on CHINA by now.
Can you share the seller name etc?
@@lionelhowell4972 THANK YOU!! I really like the DIY idea but if its going to cost the same or more in the long run I might as well buy it complete.
Do you have the link
Nice build. Didn't seem to have many threads on that rear axle nut?
Just enough for the nut to fully thread on basically , but yes it's basically just enough. There are other model (more expensive) motors like QS273 or a more rare QS205 that have a longer axle length that allow for the nut + a lock nut to fully seat. A very good observation on your end ! Thank you for pointing it out 😊👌
Dear friend! What is the name of the music that plays in your video?
Very interesting video! But if possible I would recommend to install the motor so that the wire is facing down. Then the water will not go to the motor so easily.
Yes you are indeed correct , in this case the motor cable is actually not quite long enough for these MXUS 3K Turbo motors.
The proper place is to go below and we did try that first but then we couldn't connect to the controller inside.
It is an excellent point and I thank you for addressing it ! :)
Bearings What size is it? I don't know what size to buy. It's too risky to buy and try it myself.❤
When are the kits coming back
If i get one of these im putting on street tires and clip on handlebars and have an insane supermoto.
They make an amazing supermoto bike !
i was thinking about buying one would i need to buy any wiring or anything and for the connecting the handlebar cables im confused where did the other wires come from are those from the controller
Did you guys have issues with movement in the handle bar stem area when using the front brakes?
I've had that issue, replaced the front stem bearing with races and issues solved. However still not enough for these bikes in my humble opinion.
I wish they were still available on the site :(
What is the cable you plugged into the controller with the blue connector? You used it to add lights but i dont see it on your site.
can you change the size of the free wheel like people with surrons do to there sprocket for mid mount motors? will it do the same thing and change the top speed or acceleration depending on which way you wanna go?
For mid motors yes , this one is a hub motor so it wouldn't apply , but I have seen it done on mids
do you think the breaks/suspension could safely handle about 300lbs?
Nice video, tiny things like putting lock washers or regular washers on bolts. Getting proper size quality bolts also kinda must do, the chinese ones can snap, wear threads out or come loose. Maybe those could be made as a kit for upgraded bolts and nuts
Very true. We're selling a few kits right now and throwing in all of the proper sized bolts, doing the first one kind of sucked lol having to find out what size bolt was needed.
I appreciate the comment! Yes there are definitely improvements that can be made to the way we assembled it. Lock washers / regular washers is a great start for us 👌
@@ElectricBikeLaboratory Thats nice to hear!
Awesome video. Where can you get the front fender wedge screw?
Thank you! I've been looking for these wedge screws on the internet for the last 20 minutes with no luck , we pulled them off of another set of bike fenders. I'll keep looking and message here when I find them 😊
Fender Wedge 3D Print File
www.thingiverse.com/thing:6541777
Saludos Bro!
Tu cuanto mides y cuanto mide toda la bicicleta ?
¡Hola!
Mido 5 pies y 11 pulgadas y la bicicleta me queda bien, creo que la altura del asiento es de aproximadamente 33 pulgadas (84 cm) más o menos.
¡Espero que esto ayude!
I'm very new into this and, I'm used to hooking up car stereos and amplifiers but I was wondering, to extend the battery life could you put a battery capacitor like in the battery compartment just right in front of the battery and hook it up in a parallel sorry. Or is it just not compatible like that.
Generally not done with ebike batteries , usually to extend life you under charge the batteries
@@ElectricBikeLaboratory ok thanks
Nice bike bro. I just got the 8000W motor. It's cool ,but how is the 12 one?!??
8000W motor usually is the QS273 which is a BEAST of a motor. Hubsinks and statorade can run it to 20KW. These ones are an MXUS 3K Turbo motor, good for 3KW-5KW and up to 8-10KW with statorade and hub sinks.
Hope you're enjoying your bike! Must be fast!!
nice bike how much just for the frame? if possible
Yes we have the frames available on our site !
does it come with all the bolts and hardware like the spacers and washers ?
Hi there, yes it does !
when will the kit be back in stock ?@@ElectricBikeLaboratory
Most likely in Spring , I believe you are on our waiting list so stay tuned! We will likely have a couple that we can put together before spring as well!
hello how much does this all cost roughly
Hey Bro!
Será que se le puede adaptar otra silla para llevar pasajeros?
Yes, absolutely
@@ElectricBikeLaboratory Bro estoy enamorado de ella 😍👍
Soy de cucuta N.S / Colombia.
sabes de alguna forma por la cual la pueda tener.
Gracias por tu respuesta 😃👍
¡Muchas gracias! Si pudiéramos enviarle lo haríamos, pero está un poco lejos 😂
Su mejor opción es obtener el marco y comenzar desde allí, ¡debería poder comprar un marco en Aliexpress / Alibaba por un precio razonable! A partir de ahí puedes reconstruirlo 👌👌🤙🤙
good afternoon. I watched your video. you buy an electric bicycle. I really want you to put together in this video. how much is the price col for such a thing? . but I need a nominal 8000 watt or even 12000 watt ☝👍
Where abouts are you located ?
@@ElectricBikeLaboratory
welcome I just read your reply. I am in Europe, country Latvia👍
QS273 will likely be the motor you use , and probably Sabvoton 75150 or 75200 controller. It may be best just to buy a built bike from Alibaba for Latvia
@@ElectricBikeLaboratory
Meklēšanas rezultāti
Tulkojuma rezultāts
Latviešu
Angļu
Vai domājāt:
Paldies kad atbildejat. man obligati vajag 12kw elektrovelosipedu. varbut jus ziniet alibaba vares nosutit uz latviju elektrovelosipedu ja es pasutišu alibaba?
Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?
@@ElectricBikeLaboratory Thank you when you answer. I absolutely need a 12kw electric bicycle. maybe you know if alibaba can send an electric bicycle to Latvia if I order from alibaba?
I need help with my stealth bomber bike,I can’t get no throttle at all,have power going to controller but throttle won’t work
Hello! ive had a problem wih mine where the light, horn, and urning signals dont work do you know what i can do to fix this issue?
I'm guessing it's not one of our kits , lights can be a pain which is why we opted for this plug and play system . Sounds like either the power feed or ground feed running to your switch has a broken wire and some kind of break in the line. Check those first !
How fast does it go looking at getting one from the link.
The display limits to 72 km/hr but if you enter a smaller wheel size to "trick" the computer it will spin up to about 100km/hr or 60mph
Will there be a qs273 option later on?
Deciding between QS205 + ferrofluid / heatsinks of QS273. Really hate the weight of the 273, the bikes are heavy enough. The 205s can do 10KW which is plenty but the 273s are pretty bulletproof even without mods, tough call!
hi whats on my mind is a bike that i can take to work, detach battery for charing in an apartment, and breaks/suspension that can hold about 300lbs (id like to be able to take myself 150 and my partner 120 on short trips (3mi round trip), is there a bike that can do this? been looking at the radrunner 3 for this
I think the Radrunner might be a great option for you!
Amazing content, as always!
Thank you!!! :)
No one had any issue with the battery "mount"? Those foam tape strips aren't going to hold 40lbs in an accident. I don't believe it was stated in the vid what the power of the controller was but the wire coming out of the xt90 adapter cable to the battery looked comically undersized. Might work for 3kw. If this is an 8kw+ build those wires are going to get toasty. The foam tape being the batter retention mechanism was the craziest part.
Hey brother looking at mounting the front fender but can’t seem to find anything like that wedge hole with the wing nut, any chance you know where I could get it? Or did you just fabricate it?
Bolt*
That is the question we seem to be getting they actually came with our other fenders and we just stole them off there, but a 3D Printed variant is on the to-do list for us!
Fender Wedge 3D Print File
www.thingiverse.com/thing:6541777
Nice bild buddy, what a good video !! 72v 60ah right ? What about full trottle range vs pedal assist range ?
Around 100km on throttle and never tested pedal assist alone :P I would think something like 200-300km though depending on how fast you're going, usually PAS is at lower speeds
@@ElectricBikeLaboratory realy awsome ! its a good deal, what about your geography location ? its like.. flat geography or many hills in the city like around area ? Thanks a lot buddy and have a nice week !
Hello dear friends it looks like real mountains bike 😅😊
great video bro👍
Thank you!! 😁😁
is there a peddle delete version available?
There are frames available without pedals , just pegs
What is the headset kit used in this video. Anyone have a link for it?
We need a mid drive version of these bikes, those hub motors are not good offroad
Thank you.❤
You're welcome! Hope it helps! :)
Is the chain and pedals necessary?
Not totally necessary, there are many people who replace them with pegs
Hello. Would you be willing share the 3d file for the controller mount? I checked your site and the mount is not available for purchase
Yes email me at affordableebikes@gmail.com and I'll send it to you
hello do you have "certificat of conformity " type approval 168/2013 CE
We do not unfortunatley
i really want one of these, there so expensive lol
The nice thing about them is they can be bought in pieces as you have the funds , all at once can feel pretty expensive, most of the cost is in the battery
Great stuff :)
Thank you!! :)
When you placed the front fender on what is the exact name of that wedge bolt you used I'm trying to search for it
Please and thank you 🤘🏾 killer build can't wait for mine to come in the mail
Someone else has asked that question and I looked all over the internet for that bolt type but can't find it. I will report back when I do !
Fender Wedge 3D Print File
www.thingiverse.com/thing:6541777
What's the name of this rear fender?
I am not sure honestly 😅 it was an add on when we bought the frames for these bikes
do you ship to europe?
Small parts, yes
Where can I get the file for the controller mount bracket?
Email us at affordableebikes@gmail.com
41:11 where can i get this blue cable?
The frame joints don’t look like they will hold very well. I’ve purchased a 60v scooter off of alibaba for $1600 and the frame failed due to metal fatigue. I absolutely see this happening to this stealth bomber clone.
So far we've built about 20 of these and none of them have failed at the frame. They're possibly overbuilt (very heavy). But in any case it is a good thing to watch out for!
hi i saw in ali express they sell a complete set of this is it legit tho?
No idea
yo how much for u to build one and send it tk me I would die for ine
Send us an email ! We currently have a wait
affordableebikes@gmail.com
Where do you get those screws
Which ones ?
The wedge one for front fender
Fender Wedge 3D Print File
www.thingiverse.com/thing:6541777@@jospivey777
Some one please help me 😢I have motor or controller short circuit (sensor fault)
You may have to take apart the motor and install new sensors. I had 2 in my motor and they both failed
How longs your waiting list? Lol
Uses" Chinesium bolts".
Uses a spacer on the brakes.
Doesn't use longer bolts to secure the brakes disc.
Locktite is no substitute for thread engagement.
FAFO
Hey thanks for the comment! We switched to longer bolts for the brake discs, and the spacers for the rotors are aluminum. Great catch though on your part 😉
Built a fake myself it was fast with terrible brakes fake shocks front and back. I honestly think these copy cat manufacturers could build a brand themselves instead of being invisible. What I am saying is they are so often invisible when it comes to after sales.....
Just buy a talaria xxx it’s like 500 bucks cheaper and faster
Just looked it up and Talaria XXX is $4000CAD and only includes 60V 25AH Battery, 47 mph top speed
The one in this video is currently $3500CAD and has 72V 55AH Battery, which is more than 2.5X the amount of battery, and can do up to 50mph.
Talaria XXX is a sweet bike, but facts are facts. More expensive and same speed if not slightly slower, and a battery that is 2.5x smaller. Maybe you can clarify if I have something wrong here?
@@ElectricBikeLaboratory where I live it’s $3000 usd so better bang for buck where I live
Are you stunned? Do the CAD to USD conversion and look at the speed conversion as well that's DOUBLE the battery.
I can't stand that Americans don't know math...
The Canadians are getting destroyed with the currency , Americans don't realize how low Canadian dollar is compared to theirs 😭😭
same on Aliexpress 400€ 😂
The music playing in the background makes this unwatchable
stealth bomber showed up at my local track I own a mx4,xxx, and pro ss when I gave it a try it was shit sorry I'd rather ride xxx over stealth bomber anyday anyone that rides dirt bikes will feel the same sorry.
Couldn't agree with you more.
I have 2 Surrons and a Talaria MX3 , we've never brought a Stealth Bomber to an MX track, it's not made for it at all. It's made to ride the roads and occasional light trails in complete silence (hence stealth) , anything with a heavy hub motor is not an off road machine.
The 2 are totally different like what bro😂😂 ones for dirt tracks ones for pavement commuting. Here in Chicago I'd take the bomber all damn day over xxx.
wait there isnt a nut or bolt holding the fork into the neck?
Star nut at the top