First of all you need to have creativity, imagination and good ideas. Secondly must do it, give it a try. While others break their heads, draw something, have sleepless nights etc., you just do it. You actually really work on things. And this is extremely great! Of course sometimes it needs improvements, but your work and builds are amazing! You are a great inspiration!
No, first you need to have money to afford the tools, materials, and time to even start a project like this because we live in a broken world where we must weigh our dreams against our survival.
Just because it all in a few minute video does not mean it didn't take days and days to make or that there was no drawing, sleepless nights, re-dos of things that didn't work etc. That is the magic of video editing. But to me all that work and determination we don't see makes it even more impressive, not less.
@@skaybaltimore well maybe because cheap bikes are made of steel, not aluminum or carbon. you can weld steel but not aluminum or alot of other more expensive metals
Also I'm curious because I've often wondered about this but I've never seen one before. Have you ever tried to make or seen anyone else make what I guess you could essentially call a skinny trike where the distance between the two rear wheels is only about a foot apart but which I'm speculating would have the stability of a 15 - 18 inch wide rear tire and effectively a very stable platform for a huge DC motor (DIY Deathtrap). Ideally out of 3in wide tire to minimize drag while still maximizing stability
I'm curious about stability issues because at 40 miles an hour something being just a little off centere or not balanced properly can extrapolate out to be quite a problem and a small vibration at that bikes normal intended speed could make it ride like a bucking bronco you're hard-pressed to stay on for 8 Seconds. I've seen someone warp a motorcycle so badly from welding on it's frame without structurally changing it very much to the point where it was quite unpleasant to ride once it was up to speed and there's quite a difference between a 40 mile an hour bicycle and 200 mile an hour motorcycle but it seems the same problems could easily manifest proportionately speaking when you scale it up. Is that why you change the frame so radically to compensate for those type of problems or was that just Whimsy because I was a little confused by that part where you flip the back end over and compressed it vertically with a pivot point just behind the bottom bracket and very different suspension from how it started? Also did you purchase the battery pack or fabricate your own because it looks to be a real Beast of a battery filling most of that triangle completely so could you tell me a little more about it, specs price where you bought it or if it's your own creation specs and capabilities and how it's working out for you as far as did it meet your expectations or is there something that in hindsight you would have done differently?
Unreal, but for your welds and lungs, take off the paintwork around the area. Some decent skill you have though👍🏽 that torque arm will help with the spreading but have something that can enclose the axel so it can't drop out. The regen will cause alot of rocking on the axel. Unfortunately I'm speaking from experience on that one 😕
Good evening! I looked at your Master class on creating a bicycle bike - fantastic sticks are great !!!! Please tell me what material is the bicycle frame aluminum or metal, which one? and with what electrode did you weld? Best regards, Alexey Nastenko Kazakhstan
LOL, So all this great work to make what is already available in parts or the whole on the market. What you could have done was rebuild/build it to use Honda C90 wheels and tires and a mid drive motor. That would have made it a uniquely durable, puncture resistant, long lasting, easily maintained and less expensive to own in the long term E-bike. But fun video, Thanks!
You had an excellent vision of what you wanted and set out to accomplish fabricating it but I'm having trouble understanding why it is you started with a fully functional working bicycle when it seems like you could have easily done the same thing with a bike that has been completely destroyed run over or just a handful of bike parts from bikes that no longer worked and no good for any other purpose then taking up space in the landfill or recycling bin rather than what looked to be a brand-new bike.
Becareful at speeds over 25 mph. Those are not speed rated tires it’s no joke they pop and peel instantly and your on your face in a second and there’s no controlling it I blew one at 30 and bout got killed. Nice build ! You should specialize in utility fat tire bikes for off road lots of hunters buy em. They buy trailers to. I have a upgraded Pc control I can’t figure how to marry it to by hunt bike( I upgraded to a sine wave unit) I have 5 wires out of like 20. No schematics 😡 no support.
I really love your work, but in my actual country (Perú), there's a law prohibiting motor bikes likes yours (self-made). It can only be use with warranties from a well-known brand.
amazing your work on this project, it was amazing, here in my country only the cost of the battery is the value of a 160cc combustion motorcycle, I have a suite in the united states through a carrier, would it be possible to contact you, would you like to see how much go out to buy there, and send them to the suite to come to Brazil, I thank you for your attention
First of all you need to have creativity, imagination and good ideas. Secondly must do it, give it a try. While others break their heads, draw something, have sleepless nights etc., you just do it. You actually really work on things. And this is extremely great! Of course sometimes it needs improvements, but your work and builds are amazing! You are a great inspiration!
No, first you need to have money to afford the tools, materials, and time to even start a project like this because we live in a broken world where we must weigh our dreams against our survival.
@@EmonWBKstudios maker space.
Just because it all in a few minute video does not mean it didn't take days and days to make or that there was no drawing, sleepless nights, re-dos of things that didn't work etc. That is the magic of video editing. But to me all that work and determination we don't see makes it even more impressive, not less.
Love how he reused each part, and never made a mistake.
Amazing work with very basic tools, scrap metal and old bikes. 👏👏
Amazing just
Just amazing, love it
I was stuck at how to make a point for rear suspension, but you helped me, thanks so much 💖💐✌️
one of the best DIY ebike build i have seen @Albert. Thanks for this video. Motivated to build my own DIY ebike.
Well it's one of the badest i have seen, you shuld search some more befor you start
Love it!! Nothing fancy about it!! Vice grip drill and an angle grinder is all this dude uses and is very crafty!!!
I'd be surprised if that rear frame lasts, it needs more that one fixing point, not counting the shock, it will just twist under the pressure
Maybe, maybe not
L
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
that thing is a death trap
Yep the rear end looks a little rinky dink. And that's a lot of steel I wonder what the bike weighs?
When you know just enough to get yourself in trouble - Darwin.
pretty smart how you modified the frame... Props!!
That's not far away from literally building a bike from scratch
অংশ অগা না অথচ াোঅঅাাঅাাাাা
I was going to say...why even bother with that cheap bike to begin with. He basically (skillfully) destroyed it anyway.
@@skaybaltimore because he used the frame, which isn't very easy to build exactly right
@@archietheproto7706 OK. Fair enough.
@@skaybaltimore well maybe because cheap bikes are made of steel, not aluminum or carbon. you can weld steel but not aluminum or alot of other more expensive metals
You are a very good metal worker and ebike maker NICE.
Well done I wish I had a shop to do some nice work like this!
Wooow man! You have a golden hands!!!
Be inspired!))
Well that looks simple enough, I will start mine straight away!!!!!
WAW! Congrats! New version ng fsesc4.20 smart mukhang solid. Sana walang issue.
That's the best idea I've ever seen ill also try this
Good job 👍 You have golden hands 👍
Nicely done!
I like the extended rear . I have fat 4.6” tires no suspension but the tires take it up.
Dang I thought my 4" tires were big. Didn't even know they made them in 4.6".
@@captaincaveman8532 I run high pressure bro 🥳👆 I think I can get 6 inchers if I push it.
i love how youtube make it look like it's easy to build..... The number oh hours of manwork is incredible !
Yeah your right, how about some 4 day long videos
Level Up brother..Good job Albero😎
Great work.
I just bought a full suspension bike and fitted a kit.
ll0p0
Liked everything about it!
Also I'm curious because I've often wondered about this but I've never seen one before. Have you ever tried to make or seen anyone else make what I guess you could essentially call a skinny trike where the distance between the two rear wheels is only about a foot apart but which I'm speculating would have the stability of a 15 - 18 inch wide rear tire and effectively a very stable platform for a huge DC motor (DIY Deathtrap). Ideally out of 3in wide tire to minimize drag while still maximizing stability
Absolutely fantastic 😊 really good 👍
OMG neo. You're a genius⚡🔥
so cool!
super great , j 'adore et tu fais tout !!! tu as de l'or dans les mains...vraiment, bravo !!!
Nice job men!👌🏽
Great work. 👍
Great work but the changes to the frames integrity seems very dangerous.
Nice very build up. Great.
Need one so bad that’s cool 😎
Dude, so sick.
Nice job!
What a great ebike.
Excellent...We need more 60kph ebikes!
I will
You are a genius.
Ang husay!
Well done bro, BUILT NOT BOUGHT
Great job 👍👌
great clip 🤘
Love it 👍
Saludos desde puerto rico Amigo tremendo video mucho éxitos
bravo love it
Galing mo talaga idol.. Turuan mo na Ko... Great built.. Keep it up!!!
Madami future yan
I wish I had a welder lol
I'm curious about stability issues because at 40 miles an hour something being just a little off centere or not balanced properly can extrapolate out to be quite a problem and a small vibration at that bikes normal intended speed could make it ride like a bucking bronco you're hard-pressed to stay on for 8 Seconds. I've seen someone warp a motorcycle so badly from welding on it's frame without structurally changing it very much to the point where it was quite unpleasant to ride once it was up to speed and there's quite a difference between a 40 mile an hour bicycle and 200 mile an hour motorcycle but it seems the same problems could easily manifest proportionately speaking when you scale it up.
Is that why you change the frame so radically to compensate for those type of problems or was that just Whimsy because I was a little confused by that part where you flip the back end over and compressed it vertically with a pivot point just behind the bottom bracket and very different suspension from how it started?
Also did you purchase the battery pack or fabricate your own because it looks to be a real Beast of a battery filling most of that triangle completely so could you tell me a little more about it, specs price where you bought it or if it's your own creation specs and capabilities and how it's working out for you as far as did it meet your expectations or is there something that in hindsight you would have done differently?
Unreal, but for your welds and lungs, take off the paintwork around the area. Some decent skill you have though👍🏽 that torque arm will help with the spreading but have something that can enclose the axel so it can't drop out. The regen will cause alot of rocking on the axel. Unfortunately I'm speaking from experience on that one 😕
Bici molto bella,e funzionale .Rispondente alle caratteristiche date,arrivata con 20 giorni di anticipo,molto elegante.
Galing!!!
did he weld steal and Alu togehter ???? seams more like a death trap in my mid but as long as it works.
Nice !
Nice wish i could build one .
Good evening! I looked at your Master class on creating a bicycle bike - fantastic sticks are great !!!! Please tell me what material is the bicycle frame aluminum or metal, which one? and with what electrode did you weld? Best regards, Alexey Nastenko Kazakhstan
depends on your budget.. but for me steel is the best..
Amazing
I was the one told you to build e onewheel remember?
Thanks you bro
Brasil assistindo seu vídeo Meus parabéns amigo vídeo muito top muito top Beautiful Beautiful wonderful
LOL, So all this great work to make what is already available in parts or the whole on the market. What you could have done was rebuild/build it to use Honda C90 wheels and tires and a mid drive motor. That would have made it a uniquely durable, puncture resistant, long lasting, easily maintained and less expensive to own in the long term E-bike. But fun video, Thanks!
Great !!!
Hello, Flipsky 75100 has the erpm setting. What if you don't know the exact erpm of the engine? And is it necessary to provide the exact ERPM value?
astig chief. parang mas okay magpagawa na lang sau. more power.
paulboninvargas
zebianmnl
You make the battery pack with this small 3,7volt li ion battery ?
You had an excellent vision of what you wanted and set out to accomplish fabricating it but I'm having trouble understanding why it is you started with a fully functional working bicycle when it seems like you could have easily done the same thing with a bike that has been completely destroyed run over or just a handful of bike parts from bikes that no longer worked and no good for any other purpose then taking up space in the landfill or recycling bin rather than what looked to be a brand-new bike.
So super
Nice 💯⚡🚴
good job
Kamusta n? Tanong ko lang sana Kung pwd gamitin ang flipsky controller sa bafang hub motor
Nice creation new friend here
Becareful at speeds over 25 mph. Those are not speed rated tires it’s no joke they pop and peel instantly and your on your face in a second and there’s no controlling it I blew one at 30 and bout got killed. Nice build ! You should specialize in utility fat tire bikes for off road lots of hunters buy em.
They buy trailers to.
I have a upgraded Pc control I can’t figure how to marry it to by hunt bike( I upgraded to a sine wave unit) I have 5 wires out of like 20. No schematics 😡 no support.
@13:16 61A current draw, that's huge 😱
respect
grabe idol umabit ng 63 ang speed
Hello, great video. The FLIPSKY Mini FSESC4.20 SMART link doesn't work.
Крутяк👍🙂
When the steel he is using is tousent times better quality than the one ised in modern cars...
This hub motor is water proof?
Genius
Can you Prepare it for money how much cost you need
wow anong course sir na take nyo dati?
Its 2000 watts?
-40a regen braking kahit 15a lang nakaset? Tama po ba yun?
I really love your work, but in my actual country (Perú), there's a law prohibiting motor bikes likes yours (self-made). It can only be use with warranties from a well-known brand.
buy cheap one and make it extreme 😅
That is because tested bikes satisfy safety standards which self made bikes don't,
Showwwwww!
What's electronic equipment installed in this cycle
Could u take the peddles off n leave them off
HOW MUCH COST IF YOU MAKE MY BIKE JUST LIKE THAT? ARE YOU FROM PHILIPPINES?
kakainggit ang skills
where did you by the hub motor ? and what was cost ?
50k
Can you please make a complete DIY bike
amazing your work on this project, it was amazing, here in my country only the cost of the battery is the value of a 160cc combustion motorcycle, I have a suite in the united states through a carrier, would it be possible to contact you, would you like to see how much go out to buy there, and send them to the suite to come to Brazil, I thank you for your attention
I'm always looking for local supplier, they sell cheaper because of bulk import. and my country are much near on china. than yours
sir...nagbebenta ka po ba ng electric bike at magkano?
Cycle is be like - " mujhe kharida kyu ; khud hi bana lete "😅
amd regen brake ? wires?
Beautifu the l Machine top
👍
Ты красавчик
First comment brother 😁
What volt battery? , ampere ?
Discharge ampere?
it was much easier to buy a bike with two shock absorbers initially
Brother please make a super73 electric cycle
Another bike ?
Why did you mount such a large engine ?
I would be satisfied with a 500 W engine.
It's a bicycle, though !