Це відео не доступне.
Перепрошуємо.
Gopowersports stage 1 kit install 196cc minibike
Вставка
- Опубліковано 27 гру 2021
- Thanks to #gopowersports for the stage 1 upgrade for the #realtree rt200 minibike this should wake it up Follow along and like share and comment on my videos I’ll be giving a bike away soon
Thanks for watching #rb200
I want to know about mini bikes but they are very confusing. I want to mod my 212 but idk what to get. If I get the stage 1 kit and want to make it faster in the future what would I get next a stage 2 then 3 then 4?
Did you have to remove the governor to put a stage 1 on
No it just is as simple as removing the air box and rejetting the carb
What did you do with that hose that sticks out
The hose that sticks out we’re
if you use a pair of vice grips you can remove the peice on the bottom to put in a new jet...
I didn’t bother to try but I did keep the carb so for the next one I will do it
Not the California models
Yes they use rivets to seal them no bolts or anything and solid caps
@@EnviousRepairPerformance I know it doesnt look like it unscrews on the bottom of the carb, but trust me...that part unscrews...I used vise grips to remove it, and get to the jet...
Yeah I’m familiar with them I just change them out since they are cheap and I can adjust the mixture screw as well
What is the best oil to use in the RT 200 I've seen 15w50 and my paperwork says 10w30 SAE so which is best
I use either valvoline 10-30 with Lucas zinc additive or just Lucas 10/30 with the additive
@@EnviousRepairPerformance tky
No problem my man
do you need to install the jet and if you dont is there any problems that will happen?
Depends on your elevation and yes should rejet after every modification
How do you put the top part back on that’s supposed to cover the governor screw?
The airbox ? Or what top part
Is removing the governer o good idea?
No only Honda engines you can cause the produce a lot of power these Japanese engine are not use to producing lots of power
Where did you get this kit?
Stage 1 kit you can get from anywhere Amazon is cheapest but there is gopowersports ombwarehouse
What’s the zip tie method?
You zip tie the governor spring so it don’t open up right away gives you like 1000 more rpm
Can you explain the zip tie method a bit more into detail. I am wanting to do this
I have a video on removing the governor completely you don’t want to bypass it and explode the motor
@@EnviousRepairPerformance it’s better to remove it then do the zip tie method?
@plznotedbundy1614 yes why a temporary fix when you can permanently remove it and upgrade from there
Whrd ya get ur exhaust
I made it
You letf the filter off the rocker arm cover
Yes don’t need it
I noticed that too. I just ordered a stage 1 kit from GPS, and it comes with a tiny filter that I think is meant to plug into that hose, that way it can still vent but it's not open for dirt to get into the valve cover.
what’s top speed
38mph
what would top speed be without removing governer@@EnviousRepairPerformance