Question, I just installed this kit on my B200 196cc. At 5:22 you said the tank vent hose does not apply to the coleman’s. Do I have to cut that hose like the end and use a vent that came with the kit and also do I put the valve cover vent hose back on and use the other vent like the video? Reason I am asking is because after the kit install my bike starts and when I accelerate it just dies… can’t figure out why.
@@Tmtoutdoors no one in their customer service department reached out to me… I emailed, called and left 3 voicemails and also got on their social media dm’s and on here. What I did is adjust the fuel/air screw on the carburetor. Turn it all the way to the right I believe be careful not to break the tabs once it won’t turn anymore easily stop. The bike has to be running and adjust the opposite way from there. Also make sure your gaskets are on correctly on the carburetor. I double gasketed by accident.
Quick question. So I got the stage 1 honda clone carb. I received a lil packet with a jet. The jet inside the packet is the performance jet right? So I removed the jet that came in the carb and installed the jet that was in the packet. Hope I did it right
Can you please tell me which upgrade jet i need for my 390cc engine? I want to change the airfilter and exhaust. But i don't really need an performance increase. Just need it to work with new airfilter and exhaust. Thank you!
Thanks for the video. Doing this for my son. What clutch or torque converter kit would I get with this to complete it? Do I need a smaller sprocket too? His coleman 200ux is bone stock.
Hey!, I have a really big problem, i bought this kit to put on my Coleman B200R the only problem is that i cannot install the jet inside the carburator because the bottom of my carburator it does not have the bolt to remove the carburator cap, it only has the drain plug. i dont know how to access that jet to put the 0.38mm jet that comes with this kit😭
@@GoPowerSports I tried riding testing the kit without the 0.38mm jet but the bike sounded like it wanted to turn off and if I let off the throttle it would turn off, is that because it doesn't have the 0.38mm jet from the kit?
Im rebuilding another 196cc for a go kart. How many stages can i modify,whats the difference between each upgrade and what are the prices of said upgrades?
I need to know if you suggest the skinny header for the mm80 if I run a stroked 212. I'm doing some big things on my Race Day Bike. I need to budget the biltwell throttle or if I do the skinny and mini 91 can a guy get a little help there? I ordered some "smalls" to celebrate 😉 finishing this thing. I'm pairing you guys up with EC for a crazy little bike that gets a lot of attention. Super proud of this one. You'll see. Taylor and Jason basically covered that one right? I know I'm annoying but I got love for these minis and this one is one of my favorites.
I'm trying to check out online so let me know guys. I'm building a nasty DB30S that's getting the GPS treatment with suspension, tires, seat and handlebars so I'm showing all that off too. I'll put in a good word on those Predator race engines you guys are offering too even though I just set something up before you started that!!! Darn it Gopowersports!
I just gotten a stage 1 kit for my ct200exu recently and when installed, it only starts when the choke is off and when the put the choke on it revs all the way up i’m not sure what’s going on ?
I bought a stage one kit for My Trail Master Mb 200 212cc everything is good, except I don’t have a screw on my float bowl to put the main jet in🤦🏽♂️and how do I remove torque converter bc my chain keep coming off and I rather go clutch to sprocket!! Thanks in advance ✌🏽
you probably figured it out by now but your carb is probably made so you cant take the jet out, so you have to order a new one from gps, called the stage 1 carb
I never thought about this but does anyone know if it is safe to ride in the rain with that high airflow filter exposed to the elements? Even with the cloth cover?
just purchased your upgrade kit for the coleman ex and the jet in my carb will not come out. it is designed where you can only tighten it. all other mods installed correctly but with this factory jet i have no idle (wants to take off as soon as its started) and it sputters at full throttle(tried to drill it out with no luck). any advice would be greatly appreciated.
I used a screw extractor, the second from the smallest size, mine was labeled as a #2. If bit into the inner edge not into the hole in the center. Upon removal I discovered why it would not unscrew. The other side is missing, so they intended to prevent easy removal of this jet.
I just ordered two kits and they both came with the sleeve. However, what they did not tell me is the new minibikes have a security jet and you cannot remove it. So, I bought two carbs on Amazon for $18.99
@@armypilot1 they won't tell you anything they just want to sell you parts I ordered a throttle plate well I was talking to the guy not once did he tell me you couldn't Mount the stock tank back on but he did call me to reprimand me and told me not to bad-mouth them on UA-cam but to call him didn't get anywhere with him he says the crappy welds on the pipe it's something they're working on why did they send me one with a bad weld I bought a kit 2 hitter pipes and a carburetor you think he would have sent me the sleeve but they won't budge an inch to please a customer I'm leaving the gopowersports stickers on my bikes just so when people ask me I can tell them how bad they suck. Studz cells the same things that they do but they care about their customers I am about to spend a couple of thousand dollars and I will spend it with them not gopowersports
@@markremillard1919 yeah, they have a bad attitude and I should have bought the parts somewhere else. I sent them an email about a discount code that I saw in the video that did not work and this was "Tim Yochum's" response: No, there are no discounts this year because of the Chinese tariffs. We have not raised prices and can't afford any more discounts. Just a real dick attitude. Their attitude is why I bought the replacement carburetors from Amazon instead of them I will avoid them at all costs from now on.
@@armypilot1 yeah he said those were old videos I like their parts I kind of wanted to buy everything from them but they are just a very unprofessional company
So I put a stage 1 kit on my ct200u ex The engine shakes like crazy now. I called Gopowersports and the man told me I needed to remove the governor and put 18lb springs in. Any thoughts ? I don't know why it vibrates so bad and even feels slower at the top end. I replaced the car with the Honda clone with the jet already in it that you guys sell.
I would make sure your engine mount welds aren't broken, then make sure all your hardware is tightened. Doing a stage 1 kit shouldn't mess with your engine that drastically, must be something else shaking you.
If I don't feel confident enough in myself to be able to do all this correctly will my local ATV/DIRTBIKE Shop do this performance Kit install for me ? Not that you know who my local guys are but just saying in general would most places do this for a small fee ? I just ordered an X-PRO 200cc Super Size Mini Trail Bike online and if this thing only does like 24 or 25 MPH top speed I already know I will want it upgraded. My Honda Spree scooter I had back in the late 80's even went faster than that lol. The thing is I am def not a mechanic by any means of the word and am worried if I start taking parts and pieces off I won't remember where everything goes and never get it back together properly.
you could watch a video of guys putting screws in their tires for studs. Would be my suggestion and learn to do it yourself which is not rocket science and is not hard. I have faith.
Imma buy that kit to but what is he talking about when he says “you may also need a stock carb to” sorry I have no idea what he mana by that I’m just trying to understand what it is “stock carb” ? Thank you !!!
thanks for giving rather B welding a chance the man makes his own carts and bikes
Amazing video I did it to my warrior and it was great. I loosened the throttle stop screw on top of it and now shes a monster.
Lol, who's this guy? This is a classic!! Taylor has come soooo much further with his new videos!
This kit was fun to do today. Great results for the money. Thanks !
Thank you for this video and great customer service. Thank you dudes for the fast shipping. What a huge difference this made
Thanks for the love!
I might try this to my genrator and pressure washer engines and see what performance increase I get.
Lol, noice
Awesome 👏 content just watched this video and answered all my questions about the throttle lever installation 👍🔥🔥🔥🔥
Glad it helped
Question, I just installed this kit on my B200 196cc. At 5:22 you said the tank vent hose does not apply to the coleman’s. Do I have to cut that hose like the end and use a vent that came with the kit and also do I put the valve cover vent hose back on and use the other vent like the video? Reason I am asking is because after the kit install my bike starts and when I accelerate it just dies… can’t figure out why.
Same issue here
@@Tmtoutdoors no one in their customer service department reached out to me… I emailed, called and left 3 voicemails and also got on their social media dm’s and on here. What I did is adjust the fuel/air screw on the carburetor. Turn it all the way to the right I believe be careful not to break the tabs once it won’t turn anymore easily stop. The bike has to be running and adjust the opposite way from there. Also make sure your gaskets are on correctly on the carburetor. I double gasketed by accident.
@@heatcheck2426 thank you
Will this work on a Chevy 350?
😂
Yes!
The newer kit carb already have the. 38 jet in it just got mine today?
I put the stage one kit on my minibike and be 200 starts up fine but when I get on the throttle it sputters and backfires any suggestions
you probably messed up the air filter adapter and developed a leak if you haven't figured it out yet...
So from there it’s ready to be installed everything is done ?
Quick question. So I got the stage 1 honda clone carb. I received a lil packet with a jet. The jet inside the packet is the performance jet right? So I removed the jet that came in the carb and installed the jet that was in the packet. Hope I did it right
I would also like to know the answer to this
Do I need to upgrade valve springs as well ?
I would upgrade the valve springs when you take out the governor.
Is the predator and original Coleman engine the same directions or do I have to do it different.
Can you please tell me which upgrade jet i need for my 390cc engine? I want to change the airfilter and exhaust. But i don't really need an performance increase. Just need it to work with new airfilter and exhaust. Thank you!
Anything?
Just wondering what size jet to use on a stock CT200U EX. Bought a new exhaust and not sure what size jet I need. Thanks!
0.38
@@toastman9297 0.038
Thanks for the video. Doing this for my son. What clutch or torque converter kit would I get with this to complete it? Do I need a smaller sprocket too? His coleman 200ux is bone stock.
Hey!, I have a really big problem, i bought this kit to put on my Coleman B200R the only problem is that i cannot install the jet inside the carburator because the bottom of my carburator it does not have the bolt to remove the carburator cap, it only has the drain plug. i dont know how to access that jet to put the 0.38mm jet that comes with this kit😭
That is correct. Coleman's now have a non adjustable carb. You would need a new stock carb to change the jet.
@@GoPowerSports Thank you very much I just ordered a new one off of Amazon with the bolt on the bottom of it
@@GoPowerSports I tried riding testing the kit without the 0.38mm jet but the bike sounded like it wanted to turn off and if I let off the throttle it would turn off, is that because it doesn't have the 0.38mm jet from the kit?
The screw that you attach the bracket for holding the choke lever in place is placed where I cannot fully cut the choke off. Any suggestions.
Yeah me to man, I ended up breaking the metal piece that attaches to that screw and am stuck. Did you ever get an answer for this problem?
Do u have a video showing how to install the t-shaped muffler support that is sold by go power? sports?
Did y’all quit sending out the safety sleeve with the kits? I got my order in the other day and it wasn’t in there
I think it's a add on option
Mine came with one
@@kingarchon8538 how long the parts take to arrive to ur house since I’ve been waiting for mine for about a 6 days
Im rebuilding another 196cc for a go kart. How many stages can i modify,whats the difference between each upgrade and what are the prices of said upgrades?
Does this stuff make any power or is it just noise?
I need to know if you suggest the skinny header for the mm80 if I run a stroked 212. I'm doing some big things on my Race Day Bike. I need to budget the biltwell throttle or if I do the skinny and mini 91 can a guy get a little help there? I ordered some "smalls" to celebrate 😉 finishing this thing. I'm pairing you guys up with EC for a crazy little bike that gets a lot of attention. Super proud of this one. You'll see. Taylor and Jason basically covered that one right? I know I'm annoying but I got love for these minis and this one is one of my favorites.
I'm trying to check out online so let me know guys. I'm building a nasty DB30S that's getting the GPS treatment with suspension, tires, seat and handlebars so I'm showing all that off too. I'll put in a good word on those Predator race engines you guys are offering too even though I just set something up before you started that!!! Darn it Gopowersports!
I’m wondering if this works on the Coleman bt200x mini bike
Do I need the muffler? Will it be to loud without it
It will be louder. An exhaust will help quiet it down.
Can you recommend one?
Will the header pipe fit a Coleman BT200 since the frame is different than the other models?
Does the kit that only has the airfilter jet come with the breather
I just gotten a stage 1 kit for my ct200exu recently and when installed, it only starts when the choke is off and when the put the choke on it revs all the way up i’m not sure what’s going on ?
Hello I have a ct200uex and I was wondering if this would fit with the torque converter riser on my engine
Yes it will
Will this kit work for 196cc engine
I bought a stage one kit for
My Trail Master Mb 200 212cc everything is good, except I don’t have a screw on my float bowl to put the main jet in🤦🏽♂️and how do I remove torque converter bc my chain keep coming off and I rather go clutch to sprocket!! Thanks in advance ✌🏽
you probably figured it out by now but your carb is probably made so you cant take the jet out, so you have to order a new one from gps, called the stage 1 carb
Does the kit include directions for govenor removal? And will it work on my 200 warrior right?
I never thought about this but does anyone know if it is safe to ride in the rain with that high airflow filter exposed to the elements? Even with the cloth cover?
How do I install the vent filters
Not sure if figured it out but here’s a video I made for that purpose. ua-cam.com/video/RWgvGmf5OL0/v-deo.html
He does that in this video starting @18:20 👍🏻
What would be the valve lash for 212cc non Hemi with 18lb Springs? @gopowersports
.003
Fishing Mojados for both sides the valve lash
@@PAiN46k factory it's .10 intake .15 exhaust
Will this upgrade kit work with a 301cc Predator engine, or is that a whole different kit altogether?
Blue Ox 301 is a diffrent machine this kit only work for duramax 7hp,predator 212,powerland 6.5 and its original honda 200cc
just purchased your upgrade kit for the coleman ex and the jet in my carb will not come out. it is designed where you can only tighten it. all other mods installed correctly but with this factory jet i have no idle (wants to take off as soon as its started) and it sputters at full throttle(tried to drill it out with no luck). any advice would be greatly appreciated.
Mine is the same way -- flat head will not take it out. why do they do that where it cant be removed??
I used a screw extractor, the second from the smallest size, mine was labeled as a #2. If bit into the inner edge not into the hole in the center. Upon removal I discovered why it would not unscrew. The other side is missing, so they intended to prevent easy removal of this jet.
Thanks Jeff
david drake I just ordered the same kit on a newer Coleman bike. Any luck on getting the jet screw out?
@@matthewfaulkner1699 order a new carb on Amazon with a removable jet
Funny the guy I talked to it gopowersports said that that sleeve does not come with the kit it's extra.
I just ordered two kits and they both came with the sleeve. However, what they did not tell me is the new minibikes have a security jet and you cannot remove it. So, I bought two carbs on Amazon for $18.99
@@armypilot1 they won't tell you anything they just want to sell you parts I ordered a throttle plate well I was talking to the guy not once did he tell me you couldn't Mount the stock tank back on but he did call me to reprimand me and told me not to bad-mouth them on UA-cam but to call him didn't get anywhere with him he says the crappy welds on the pipe it's something they're working on why did they send me one with a bad weld I bought a kit 2 hitter pipes and a carburetor you think he would have sent me the sleeve but they won't budge an inch to please a customer I'm leaving the gopowersports stickers on my bikes just so when people ask me I can tell them how bad they suck. Studz cells the same things that they do but they care about their customers I am about to spend a couple of thousand dollars and I will spend it with them not gopowersports
@@markremillard1919 yeah, they have a bad attitude and I should have bought the parts somewhere else. I sent them an email about a discount code that I saw in the video that did not work and this was "Tim Yochum's" response: No, there are no discounts this year because of the Chinese tariffs. We have not raised prices and can't afford any more discounts. Just a real dick attitude. Their attitude is why I bought the replacement carburetors from Amazon instead of them I will avoid them at all costs from now on.
@@armypilot1 yeah he said those were old videos I like their parts I kind of wanted to buy everything from them but they are just a very unprofessional company
So I put a stage 1 kit on my ct200u ex
The engine shakes like crazy now. I called Gopowersports and the man told me I needed to remove the governor and put 18lb springs in. Any thoughts ? I don't know why it vibrates so bad and even feels slower at the top end. I replaced the car with the Honda clone with the jet already in it that you guys sell.
I would make sure your engine mount welds aren't broken, then make sure all your hardware is tightened. Doing a stage 1 kit shouldn't mess with your engine that drastically, must be something else shaking you.
Do I also need to change my valve springs for a stock predator 212?
no you dont have to
Recommend
Do it you won't be disappointed especially if you remove the governor
@@fishingmojados1121 what does it do?
@@Micotyt prevent fluttering
If I don't feel confident enough in myself to be able to do all this correctly will my local ATV/DIRTBIKE Shop do this performance Kit install for me ? Not that you know who my local guys are but just saying in general would most places do this for a small fee ? I just ordered an X-PRO 200cc Super Size Mini Trail Bike online and if this thing only does like 24 or 25 MPH top speed I already know I will want it upgraded. My Honda Spree scooter I had back in the late 80's even went faster than that lol. The thing is I am def not a mechanic by any means of the word and am worried if I start taking parts and pieces off I won't remember where everything goes and never get it back together properly.
Same
Does anyone know if they make chains for the tires of a mb200 trail master ?
We know some customers up in Wisconsin that will drive studs through their tread and race on ice.
@@GoPowerSports Would you guys at Go Power Sports be able to put studs in the tires?
you could watch a video of guys putting screws in their tires for studs. Would be my suggestion and learn to do it yourself which is not rocket science and is not hard. I have faith.
Do you accept E transfers.?
Is it normal for the sleeve to get so hot that it starts smoking ? Upon first time installation
Got the same problem idk
@@curtbrick2995 I was told it goes away and not to panic
@@AreEff1987 cool
Will this work on a Coleman CT200u-EX?
Yes it would. You may also need a stock carb too.
Any video of what a stock carb is sorry I’m new to this just got a bike and I’m trying to make the bike go faster
Any idea * lol sorry
i ended up buying that kit
Imma buy that kit to but what is he talking about when he says “you may also need a stock carb to” sorry I have no idea what he mana by that I’m just trying to understand what it is “stock carb” ? Thank you !!!
Sint din rominia .... de pe ce sait magazin online ai cumparat acest motor ...?? Sint de doua tipuri al tau este motorul cel bun !!
The jet is unremovable ? Having issues there
You'll need to buy a stock carb because your Coleman Carb does not allow you to remove the jet.
Nice muffler. What is the name of it. ?
Not sure why after installing kit the bike shuts off when choke is all the way off like it's not get enough gas.
You figure out why ?
Which stage 2 kit will fit my Coleman 200?
I have a ct-200-U ex
You would have to upgrade your engine. The stock coleman is a smaller 5/8" crankshaft where normal engines have a 3/4" crankshaft.
Ok thanks
Why didn't mine come with the pipe sleeve i ordered from you guys
Will I pop wheelies with this upgrade? I’m hoping no
if you lean back to far you will do a wheelie
Does this kit fit ct200uex
Yes
Can I buy the kit but with out the exhaust
modding the carb without a header will make it not run correctly, they are 'tuned' to run together.
Yes you can
Do you need to remove the governor to get the best performance from this kit on this engine or any other mini bike engine?
Second that
Do it yes it helps just make sure you upgrade your valve springs
The MB200 header wouldn't fit my ct200u
Correct, you need the Coleman Header for your Coleman Minibike.
When you going to bring the price of that Juggernaut down $119 come on guys
How much more Horse Power will i gsin?
Meow kitty maybe 2hp at best
Thank you and will order a kit to try out
@@tizbb1962 1.5
I can see if it mean to go 10 miles an hour faster at but it won't
Apparently No One is replying back to the Comments in this video...
He said it wasn't your video that said that
the holes in the table dont help lmao
Your too quiet
Put it on a Miata
Gain
OMB is way better for Coleman
This video sucks man for installing the carb gaskets. You could of got the camera closer to those of us that have never done this before
This place has bad customer service
Will this work on a predator 224cc engine?
It will not fit the 224 crankshaft.
Will this kit work for an Coleman RB200?