@@tcunleashed-unleashyou9351 hi, friend,. I'm desperate to find a magic lantern for my M6 MARK II do you know where I can get the software for my camera for the M6 MARKII?
Finally - the video I was looking for. I just picked up an extremely inexpensive Canon EOS 5D Mark II and am looking forward to setting this up. Thanks for this video.
I have a Canon 80D and I want to use it to take live videos, I connect the HDMI output to the capturer and from the capturer to the cell phone and only the video comes out, but the audio does not come out. As I do. -Does AUDIO come out via HDMI from the Canon 80D live? -When playing recorded videos if the audio is present. Thank you
Hi Zulf. Did you also install Magic Lantern on your T2i? And, is Magic Lantern the only way to get clean HDMI output using an older DSLR such as the T2i?
I can't seem to be able to remove the transparent gray bars from the top and bottom of the screen. Insaw one video that suggested just hittong the trash bin, which does remove them when ML comes up, and they should go away when you exit the menu, but they do not.
What border do you mean? Is it not fully clean? There's so many potential things you could mean... simply crop it?? You've almost certainly sorted it by now but just incase!
I have a question, if i use another card without the magic lantern files, the camera would work normally as if it did not have the magic lantern software?
Hey quik question.. i am using a Canon 1300D and have the same problem, that i cant get an clean HDMI output. Unfortunately, on the website of Magic Lanter there is no categorie for the 1300D but is there any workaround / solution that i can run the firmware of another simaler camera on it ?
Hi thanks for this video I found it really helpful. I have a Canon Eos M and have followed all the steps. I have turned powersaving off but it is still turning off any suggestions?
Thank you for this video, I like that you cover basic but practical aspects with good quality, detailed presentation. I have seen other videos on similar topics but their low production quality made it hard to watch and understand. Keep it up and I'm sure your channel will grow, it's an excellent resource. Good to see Magic Lantern can now supply clean HDMI out.! What is the resolution and pixel ratio (i.e. 16:9, 4:3, etc) of the HDMI out ? Does it depends on the camera model?
Hi Zulf (and others) I'm new to all of this and have a question: Does this apply to running a Live-View external monitor for filming? I have an Mark II as well and want to use a Feelworld 7" or similar
So what happens when you take out the SD card and its no longer in the camera. Does the camera just go back to its old setting? Do you need that specific SD card in the camera in order to have a clean HDMI connection?
If we install it we can always revert it back to the old firmware or once you install it u will have to stay with it ? Also , after installing it , all the main feature for using it as a regular still camera still function ?
There no where listing about Powershot series in magiclantern website. I have recently got a Powershot SX1 IS for free as it had lens issue and I serviced it. EOS webcam utility does not work with that even though Powershot SX70 HS is supported. The differences list is just processor is different Digic 4 vs 8. There are some EOS models as well that use Digic 4 processor. Have to dig into firmware comparisons this week. Even though it has a HDMI port, it only works for playing recorded videos. No Live video.. just that's sad that I cannot use it for live stream. Tried getting access to Cannon SDK since I'm a computer science student but they only have SDK for a specific high end model. That too there is huge selection criteria that I must fit. What do you suggest? EOS 5D Mark ii costs €600 in used condition in Germany. It is not cheap for me. One month's worth of expenditure. (Bought aukey stream series webcam for an urgent need)
Not every camera support HDMI live view. You need to ensure the camera you get offers hdmi out before you think about magic lantern. Magic lanterns purpose is to make a None clean Hdmi into a Clean HDMI. if you camera doesn't support hdmi in the first place you need to look at another option I talked a lot about alternatives in my live stream. See reply here ua-cam.com/video/fYHwiDn6Gjw/v-deo.html
Your video is very useful, but to be even more useful you should speak more slowly so that what you say can be better understood. Forgive the correction, but it is a pity that some of the substance of what you express is lost because of the fast way you say it. I am a professional broadcaster and actor, and you must remember that on UA-cam you will be seen by people from all over the world, not only native English speakers, so you can have a larger audience for your videos. Thanks for your video, it has helped me with my Canon 5D II which I still find an exceptional machine even in 2021 that can be used much better. :)
Hello! Thank You for making these videos. They're very useful. At 9:37 You mention that You've also made a video about removing bars. Is this the video: ua-cam.com/video/_3zLFzrRrcI/v-deo.html ?
✅ Watch Next: Webcam Alternatives ua-cam.com/play/PLcfKB0HGbLqZiHbbhcnXvDv6nc73Ry5WD.html
Okay, Thanks as Always!
@@tcunleashed-unleashyou9351 hi, friend,. I'm desperate to find a magic lantern for my M6 MARK II do you know where I can get the software for my camera for the M6 MARKII?
I want to view HDMI output with Camera LCD at a time in cannon 5d mark II ? Posiable ??
Finally - the video I was looking for. I just picked up an extremely inexpensive Canon EOS 5D Mark II and am looking forward to setting this up. Thanks for this video.
deserves way more likes! subbed
First video I've found of yours. Fantastic! Just subscribed.
Where the backup for the firmware before you install ML???
Just what I needed. Thank you 🙏🏻
Could not find the video, where you eliminate the grey bars. Do you know the resolution of the Live View on HDMI recorder?
ua-cam.com/video/_3zLFzrRrcI/v-deo.html
I have a Canon 80D and I want to use it to take live videos, I connect the HDMI output to the capturer and from the capturer to the cell phone and only the video comes out, but the audio does not come out. As I do.
-Does AUDIO come out via HDMI from the Canon 80D live?
-When playing recorded videos if the audio is present.
Thank you
Hi Zulf. Did you also install Magic Lantern on your T2i? And, is Magic Lantern the only way to get clean HDMI output using an older DSLR such as the T2i?
yes
I can't seem to be able to remove the transparent gray bars from the top and bottom of the screen. Insaw one video that suggested just hittong the trash bin, which does remove them when ML comes up, and they should go away when you exit the menu, but they do not.
Hey, how can I remove the top and bottom boarder from the the HDMI output ?
What border do you mean? Is it not fully clean? There's so many potential things you could mean... simply crop it??
You've almost certainly sorted it by now but just incase!
Great but, when I use this for my 5d mk2, the HDMI input to OBS becomes interlaced. Wtf do i do abou tthis? It looks horrible.. yours look good tho
didn't work for me. Tried the global draw setting. Changed to off, and it still shows the info display info
I have a question, if i use another card without the magic lantern files, the camera would work normally as if it did not have the magic lantern software?
Yes
Hey quik question.. i am using a Canon 1300D and have the same problem, that i cant get an clean HDMI output. Unfortunately, on the website of Magic Lanter there is no categorie for the 1300D but is there any workaround / solution that i can run the firmware of another simaler camera on it ?
Hi thanks for this video I found it really helpful. I have a Canon Eos M and have followed all the steps. I have turned powersaving off but it is still turning off any suggestions?
Thank you for this video, I like that you cover basic but practical aspects with good quality, detailed presentation. I have seen other videos on similar topics but their low production quality made it hard to watch and understand. Keep it up and I'm sure your channel will grow, it's an excellent resource.
Good to see Magic Lantern can now supply clean HDMI out.!
What is the resolution and pixel ratio (i.e. 16:9, 4:3, etc) of the HDMI out ? Does it depends on the camera model?
Thanks for your kind words the camera ratio depends on the camera, but here is a trick to fix any ua-cam.com/video/_3zLFzrRrcI/v-deo.html
Thanks for the info, can you provide the link on how to remove the bars from the screen. Thanks
ua-cam.com/video/_3zLFzrRrcI/v-deo.html
How do I record the video file with the HDMI capture card to my computer?
OBS is a free software for recording. You can configure the capture device in that. Hope it helps!
Thanks for the video! Can the bars be taken out for something else than OBS? I'm thinking Zoom video conferencing etc. Thanks in advance!
Nope
Are you able to get resolutions higher than 720x480 via the HDMI output?
If the camera supports it yes. it can go up to 4k
Can you tell us the best settings to change from stock ML to get the best live video ?
It would be different for each setup, try and test a few settings for your environment
Excellent, Thanks
Great work man, is it possible to connect it to ninja 5 and record over there? What kind of files it will output over there? Thanks a lot
Hi Zulf (and others) I'm new to all of this and have a question: Does this apply to running a Live-View external monitor for filming? I have an Mark II as well and want to use a Feelworld 7" or similar
Will this same concept work with the Canon EOS M or M2?
Thanks for the video. Have you tested video playback on the monitor after recording? I tried on my 5D II and it's horribly slow. Any tips?
If you disable the buffering in OBS it usually fixes it.
ITS not Available for canon eos 5D mark 4
Where is the video on how to take the bars off?
ua-cam.com/video/_3zLFzrRrcI/v-deo.html
So what happens when you take out the SD card and its no longer in the camera. Does the camera just go back to its old setting? Do you need that specific SD card in the camera in order to have a clean HDMI connection?
yes it goes back to the original firmware you had prior to magic lantern.
Would this same setup work with the Canon M50 Zulf?
The EOS M option is listed on the site and has been reported as working so I would say yes
Good one Zulf.
Hi, do you have a solution for Nikon D5000?
Hi program all good, but on my Canon 50D is still there, any help?
What about a Canon 2000D/T7?
Great video
my live view button wont toggle into live view mode. I have a 5d mark ii as well any suggestions?
thankyou, the camera loses connection after 30 minutes, any tips?
6:40
If we install it we can always revert it back to the old firmware or once you install it u will have to stay with it ?
Also , after installing it , all the main feature for using it as a regular still camera still function ?
you can always go back at any time. no worries
There no where listing about Powershot series in magiclantern website. I have recently got a Powershot SX1 IS for free as it had lens issue and I serviced it. EOS webcam utility does not work with that even though Powershot SX70 HS is supported. The differences list is just processor is different Digic 4 vs 8. There are some EOS models as well that use Digic 4 processor. Have to dig into firmware comparisons this week. Even though it has a HDMI port, it only works for playing recorded videos. No Live video.. just that's sad that I cannot use it for live stream. Tried getting access to Cannon SDK since I'm a computer science student but they only have SDK for a specific high end model. That too there is huge selection criteria that I must fit. What do you suggest? EOS 5D Mark ii costs €600 in used condition in Germany. It is not cheap for me. One month's worth of expenditure.
(Bought aukey stream series webcam for an urgent need)
Not every camera support HDMI live view. You need to ensure the camera you get offers hdmi out before you think about magic lantern. Magic lanterns purpose is to make a None clean Hdmi into a Clean HDMI. if you camera doesn't support hdmi in the first place you need to look at another option I talked a lot about alternatives in my live stream. See reply here ua-cam.com/video/fYHwiDn6Gjw/v-deo.html
Can i install it on a canon R or R5?
Hi Zulf will this work on a Canon 550D?
Yes there is a download for 550d on the website
Can you still take pictures with the cam after installing magic lantern??
Yes
Can be installed on an EOS 30D camera?
They tried back in 2012 not sure if the succeeded check out www.magiclantern.fm/forum/index.php?topic=3267.0
Hey man , will this work with eos 5d mark i
How to access Overlay menu?
I explained the process in the video
Your video is very useful, but to be even more useful you should speak more slowly so that what you say can be better understood. Forgive the correction, but it is a pity that some of the substance of what you express is lost because of the fast way you say it. I am a professional broadcaster and actor, and you must remember that on UA-cam you will be seen by people from all over the world, not only native English speakers, so you can have a larger audience for your videos. Thanks for your video, it has helped me with my Canon 5D II which I still find an exceptional machine even in 2021 that can be used much better. :)
Hello! Thank You for making these videos. They're very useful.
At 9:37 You mention that You've also made a video about removing bars. Is this the video: ua-cam.com/video/_3zLFzrRrcI/v-deo.html ?
Dang. It's not compatible with 250d.
Why would you want to use it on a camera that already offers clean HDMI? The 250d is already a clean hdmi camera
very good quality on the image output