Wireless in car charging! - Modern JDM Build
Вставка
- Опубліковано 8 сер 2019
- Always brainstorming ways to improve and modernize the Altezza to make it the perfect daily! Loading this thing up with as many 'quality of life mods' for an easier life :)
- APE Auto Garage & Accessories - (Any vinyl, wrap or tint needs)
Location: 404 40 Ave NE, Calgary, AB T2E 2M7
Instagram: / apeautogarage
Facebook: / apeauto
- Rev'd Performance - (Any repair, tuning, or building needs)
Location: 1165 44 Ave SE, Calgary, AB T2G 4X4
Instagram: / revd.performance
Facebook: / revdperformance
- Bpro Auto - (Any JDM Car importing needs)
Website: b-pro.ca
Instagram: / b.pro.jdm
Facebook: / bproautojdmimports
- AKASO 2K Dash Camera -
www.amazon.com/dp/B07PQGTQX2
- Lowcals Brand -
Merchandise: thelowcalsmovement.com
Instagram: / yyclowcals
Facebook: / lowcalsyyc
- David's Instagram -
/ davidasap
- Devon's Instagram -
/ davontherealist
Thank you for watching!! Like this video and SUBSCRIBE! - Авто та транспорт
The skirts are part of the Toyota Neo kit. They are NOT TRD, just factory options.
The air intake you have will likely decrease the engine performance. There's a load of info on forums about this, but the factory intake is actually better than most aftermarket options. I think it is just the Apexi intake that has shown to be better.
For a deeper exhaust note, keep the midsection stock and go for a HKS HiPower Silent. It reduces the booming note in the car at cruise speeds and isn't too outrageous. Also takes away the rasp nicely. Going straight pipe is gross and not worth the rasp.
If possible, brace up the chassis a bit. Makes it drive a lot better.
I'm going the ITB route on mine, you can use 4AGE blacktop throttles on an adapter plate such as the SQ engineering one. A few other bits are needed with this, like throttle linkage relocation and modifying the clutch reservoir but it doesn't work out too expensive. You can then use an AltezzaLink ECU which is basically plug in and play.
Well I didn't know I needed this in my life but now I'm buying a head unit apparently
Brody Johnson lmao sameee
What’s the specific name of the head unit?
Arturo Gutierrez Pioneer 1500nex
This video made my morning! I just bought my son an IS300 and we can't wait to start modifying it together.
U are good dad. I would fall in love with my car If it was IS or Altezza
legit amazing father!! imma have to buy myself one to motivate my dad to help😂
I actually own an October 1998 Altezza, and I work at a cellphone repair and accessory center. Never thought of this. Hats off to you!
Trd side skirt, trd real lip and Amuse front lip
U right
i knew it was trd but i cant find any for sale
Rear and sides are elegance
@@joshsweet2480 Its just TRD, the same rear and sides were offered on the NEO Customize and L-Tuned Altezza's/IS300's
It isn't TRD, common misconception. Just the Toyota Neo options from factory
That bondo job was hella clean! This entire build is honestly. Great job man looking forward to the rest of it!
David getting it done making it his own. The Altezza/IS instrument panel is one of the best for sure.
That wireless charging mod was sick 👌
Stoked about the build! I got Brian to bring an Altezza in for me a few years ago and it's been an awesome daily! Headers can help a bit with the tinny sound but can make the cabin noise pretty loud.
subscribing solely because of the Altezza! Great job man
Stevo C same.
that altezza looks so clean!
You should buy a TRD rear bumper lip , the side skirts and grill are from the TRD body kit if I’m correct but I haven’t seen that lip before
David, GET ITBS!!! You won't regret it! I'd say a Personal steering wheel would fit your vibe you're looking for IMO.
If you like custom steering wheels check out Nelson racing wheel on Instagram.
Loving how this thing is turning out!! Would love to have this as a daily!
I have an is200 and I have put the japspeed cat back with a 4.5" tip and it sounds exactly how I want it and it has a very deep sound now
Sick car! Since the 34 sedan your cars are always the nicer ones on the crew
Been looking at is300 and gs300’s as an upgrade commuter and this is perfect 👌
I got a silver is300 and I just figured out I want black wheels! Haha thanks David nice choice of JDM goodness!
Damn, car is coming along well. Gonna have to take some of those mods for my own modern 'classic' jdm build for when I get an Evo. Also, that gauge cluster is sick for a car that old honestly.
this is mad skills and knowledge altogether
David, your car looks so good bro
Jet1337x Thanks brotha 🙏🏼
Love the instrument cluster.
Loved the layout of this video
I liked having the Fujitsubo Legalis R full exhaust with header on my old SXE, sounded good and looked good as well.
you can polish the exhaust tip with some Mothers brand Mag and aluminum polish it will look great. Just a thought.
Side and rear skirts are trd elegance front lip not sure. The car charger mod and 12v delete is a sick idea
Front lip is a Amuse lip
Looking good! I miss my days of modifying cars! I've been itching to do something to mine. I'm gonna try and pick up a new job and get something extra that I can play around with.
Hell ya man keep it up loving the vids and the car keep these good videos
David’s Tezza is about to be the ultimate VIP
Hell yea, keep up the Altezza vids
Lit video!!! Love the altezza!!
looks so good
Yo dope videos , shoutout from Edmonton
I park next to one of these every day these are dope
I need this car for realies, she is the love of my life...
Not sure if you can get it over there but a rage exhaust for altezza sound good nice and deep with no rasp.
the front lip could be Amuse..sideskirt and backlip are def TRD Neo / Legana version1..had the whole set, front to back, on my altezza.
Your altezza is dope
Great DIY video. Proves you don't have to spend a tonne of money, to make your car look good.
It begins!
Such a great looking car nice work! Clutch job would've been a good time to do away with the stock dual-mass flywheel for a nice improvement!
Looks like the Elegance body kit
bruh all these little mods and add ons you do make me smile. i plan on a new head unit but never even considered double din but WOW. i bought a dash mounted QI charger but this is nice too!
Edit: My car is slightly raspy as well. I installed a DNA catback and it was too raspy for me so i went along and installed a res and megan downpipe
Get a Vortex window spoiler 👍 they look mint on them 👌🇮🇪
It's incredible how u guys still can't make an intro that isn't awkward after so many videos😂😅
Hassan abdu alrhman Lmaoo
Making me want back one!!!!!!😫
Should paint those brake calipers black or silver. Will compliment the wheels forsure.
Really nice buy bro.....
Hoping to pick up my 2000 Altezza RS200 next month. Comes with a full GReddy turbo kit AND a Blitz supercharger kit, x2 Power FCs, 18" Work XT7s.... may have to trade or sell the supercharger and go turbo. I hear that the supercharger kits kill TBs on a monthly basis!
beams is a nice engine high revving throw some itb's on it, perfect for drifting
Hey man, great vids! i just picked up an Altezza not long ago and swapped the headlights to pass safety, just curious, did you cut out mounting points in the fender?
Where did you get the wireless charger, thanks in advance, looking good your altezza! 💪
That delivery guy was cool af
I'd get the HKS Super Dragger II, but not sure if that would sound good paired with the 4 cyl
Seriously wish I can import a altezza from Japan in the states such a beautiful car and a great daily 😭
When your plug "come in clutch" literally lol 👌
Side skirts and rear bumber lip is TRD lipkit
Soooooo much better
Try getting a 4-1 exhaust manifold like the FGK . You will get a much better sound. I have a couple of videos on my channel. Search for michael's altezza a blue altezza 3sge beams.
What rim type and size? Very nice i like
Sometimes I wonder if Brian has the full lowdown on the mechanical condition of the vehicles he imports, I see you had a slipping clutch, and for me I ordered a mkiv Supra RZ that had a completely blown 2nd turbo. Which forced me to go single turbo right away.
I see where you showed the old rims, it showed that the front bumper and the hood isn't lining up good, how did you fix that?
What’s the specs on the wheels? Looks good
What headlights are these? They're not the ebay ones are they? Lmk!!! Car looks sweet, i have the same color.
Ik this is an old video but where did you get that usb knockout for the under trim (across from track/snow). Any advice would be appreciated.
Bro I was wondering if I should wrap my visors in carbon fiber. What do you think?
What model is that head unit? & also, I am now considering putting a wireless charger in my car because my 12V cigarette charger doesn’t work.
What digital spedo do you have or how did you get it?
What did you use to reinstall the windows rain guards? Mine rattle like a mofo
Try to find a FGK Legalis R or Tanabe Hyper medallion
Where did you get your gauge clusters?
So.. you can add an air filter without a turbo needed in the car?
California plate huh, you changing the channel to Socals?
Would the digital speedometer work in a is300?
where did you get the radio and can you send the link
What body kit and where did u get it ..
Helllllllll yeah
Where did you get the front lip
I’m an IS nut...on my 4th. Very tasteful mods you did here.
Mind if I ask how you went about importing a car less than 25 years old? Forgive me if you explained this in a previous vid...I’m new to the channel.
Wait i think I answered my own question. You’re in Canada now but from Cali so that’s why you keep the front plate...?
i don't think that 12v plug you put in can handle that many amps, idk if you'll be able to run everything off of it. the charging on the phone might be extremely slow because wireless charging is inefficient to begin with. the original OEM socket can provide enough power but the plug you put in it is probably only rated for 3 amps i'm guessing?
you can must put a trunk lid for it mkae it look cool from the back too,
now its soo empty.
What model pioneer stereo is that
What part of California are you from bro ?
what sizing are these wheels?
You could have placed it under the panel, so the charging dock wouldn't be visible, but a cool mod though.
wait how did you get a altezza into the USA
The altezza is my dreamcar. But they pretty expensive for europe. Im just sticking with the lexus is200 over here
Amuse style front lip
What's the wheel size and tire size?
Is insurance expensive on rhd cars in canada
Do you still have this altezza ?
What tail lights are those
Dayum!
What kind of tint % is on it??
Viilante makes great steering wheels, I've had three of them so far :)
That r34 was in sammits new vid
whats the model of the radio ans serial number
Any1 from Ireland who owns altezza 🤙🏻
Whatever happened to finishing the s13 and the honda build?
S13 just got an sr20 (update on it will be posted soon) and we got rid of the honda build but replaced it with something better (which will also have a vid soon!)
Wait how’d you import this lol