OH MY GOSH. No life story. No what's my why. No explanation about the origin of mitre cuts or the various tools to use. Just straight to the point AND in easy to follow and understand language in less than 6 minutes. I honestly can't thank you enough. 🙌🏾
This is the most perfect explanation about how to cut crown molding in thousands of videos on UA-cam, Finally I found this video thank you this is the best.
This lady knows how to teach. All the other videos start with "this is how you do it" but never go into sufficient detail why, and never explain all the different ways things can go wrong. Lea does all those things. Thank you
Of all the videos I watched, yours was the best because you SHOWED US why we are flipping the molding around. When you marked the trim with a sharpie, slowly moved it to the miter saw, we could see the problem and when you flipped it around - the solution made sense. I was using a small cove molding that had no top or bottom. It was an identical 3/4" on both edges. That was making it especially difficult for me to follow other instructions about turning it upside down, etc. Once I watched your video and understood *why* - I was immediately able to configure my cuts. I subscribed to your channel right away THANK YOU for taking the time to make this video. 🙂
A few weeks ago I was so frustrated trying to learn this while doing some work on my kitchen that I gave up and decided to order pre cut corners that didn’t look good at all and I ended up wasting my money. Thanks god that I found your video and all of the sudden everything makes sense. Thanks a lot for your help.
I always find myself coming back to her channel for the best help! If I search something and she's listed, definitely choosing it. She needs a TV show and we'd binge watch like This Old House!
Thank you so much Leah, for your patient speaking explanations. Too many people offering tutorials forget not everyone knows even a fraction of what he/she knows. But, we want to know. No matter what the project is I am attempting to tackle, I always end up at one of your tutorials. No one else takes the time to use words and visuals to make your instructions understandable. Many videos leave me still scratching my head, because I learn visually, not just by words. Once I "see it," then I can insert the words, to complete the picture in my head (i.e. spring angle/resting against the fence). I then believe yes, I "can do this." 2 years ago, Bradley Jellerichs perfectly expressed my sentiment. You are a great teacher.
Spent one comical evening trying to figure out how to put up molding around a bookcase...and then watched your video and it all meant sense. Your specific language sets you apart from everyone else. Thank you!
Thank you Lisa. I am a 20 plus year roofing veteran and I was pulling my hair out trying to figure this out. Your explaination was perfect. It was so easy. Subbed. Thanks again.
I watched 4 other videos on how to cut a outside corner on crown molding, they all went too fast and even after watching the videos I was still unsure of how to do it. I wish I had watched yours first. This was by far the best explanation of how to cut crown molding. THANKS!!
I could NOT have done it without your patient explanation! I built in a bookcase floor to ceiling and the outside joint with the crown molding is the best part!
Leah, Kudos to you making corner crown molding cuts so easy! Love the tip about the "spring angle"and how crown molding doesn't just rest flush on the wall but rests on the ceiling AND the wall! And extremely important for a beginner/ DIYer! I was trying to practice cuts with paper and cardboard and couldn't figure out why it did not fit on the wall. Crown molding comes with a 45° angle that rest on the ceiling🥺
Thank you, Thank you, so much !!!!! I can't believe how much I have spent on crown molding because I didn't know how to cut it. This was so simple and you don't have to go through making a jig to cut the molding the right way. You made everything so easy and practical. This just cleared up everything I have been doing wrong so a BIG THANK YOU !!!!! 😃 You are AWESOME !!!!!!
I couldn't believe it! After watching so many videos on this subject, you have nailed it. I finally did it after watching your video. Thanks so much. I was about to give up and call a professional but now, not happening. I got a handle on it with your straight forward explanation. Again, thanks.
I watched plenty of videos before yours and after doing so I went to work!! Thank YOU!! You explained simply without going on and on and complicating things like many other videos. YOU ROCK!!
Thank you. I have a miter box and saw. I had to reverse my crown molding err turn it over and adjust the pegs but after trying cuts on a sample of crown molding I got it down. I gotta put 3 pieces on a linen closet and buying a saw or a contractor is out of the question for now. You’re easy to follow and understand. Outstanding !!
Leah, I am a construction technologist, and I am thrilled by exploring and finding out quicker and efficient ways to get the job done while delivering optimal quality. I must when it comes to instructional and getting procedures accurately you are right up there with all the top tier. Thanks a million keep on doing an exceptional job.
Hi Leah, you are Amazing. I have been doing honeydew projects for over 45 years and you are still teaching me things. Your video on sawhorses just blew me away. So simple yet strong, stackable. I have been looking at sawhorse designs in books and all are too complicated. You have a very nice way of teaching, explaining everything so we understand what you are doing. Just watched crown molding video and again so simple. You are fantastic. Thank You, please don't stop. Mark
Newbie here Ive been doing this work for a couple days now at my house and IDK if I may have molding dyslexia or what but damn, remembering both angles every time has been tough. TBH I dont think this video will help me improve but its certainly helped me feel better about how Ive been struggling. Thank you! That was clear and concise, and fast.
THANK YOU !!!!! You just made my wife’s birthday complete. After watching this video two times, I was able to tackle the job. You made it sound so simple, thanks again !!!
You are my Hero!!!!! This video was perfect. I followed it exactly and it worked out perfectly. My first crown miter cuts were professional level. I watched a ton of videos and yours was by far the best and easiest to follow. Thank you!! Thank you!!
Leah you ROCK!! My husband's and my brains nearly exploded trying to figure this out and we just barely stumbled our way through it...after wasting tons of wood and time. If only we had had this video then!! Thank you for tackling SUCH a confusing problem and for explaining it so clearly.
+Alexandra Gill Hi Alexandra, I appreciate your comments, because that is what I was trying to achieve...take a complicated process and simplify it for the layperson.
Leah! Thank you! I now feel confident that we can do this! I will probably re-watch the turning the moulding upside down part of this video before every cut to be sure I'm doing it right....
You are a Godsend! I've watched a dozen videos and jacked up a 8ft piece of moulding. Watched this then went and cut my pieces without a single issue! Thank you again!
One of the best instructional videos I have ever seen on cutting crown molding. I could not get my second piece of an outside corner cut correctly. My first piece was a scrap from a previous cut that happened to have the correct angle. Thanks
I rarely comment, but I wanted to say thank you Leah! Your videos have helped and taught me SO much. And you're excellent at anticipating areas of confusion and misunderstanding and explaining them! Keep it up!! You are truly appreciated!!
Oh my goodness!! 5 videos and I find someone who can do the cut with one try. Finally!! I knew it could be done but I just couldn’t focus due to a 4 day migraine. Thank you!!!
I've never had to do angles etc in my old job, yet my new job I had to cut and join some crown moulding (8 metres up a ladder!) and had MAJOR dramas trying to work out why I was doing it wrong (lucky I had a lot of spare moulding!) I came here to learn more, and other videos make sense ofcourse, but its the way you explain it made it sink in to me. Thanks Leah
Dave from the UK, like most comments, at last you've broken the voodoo for cutting mitres. Someone, who not only knows how to do it, but knows how to pass on the knowledge. Keep up the good work girl, to you wood be teachers watch and learn.
I am soooooo glad you made this video!!!! Most comprehensive thing I've seen for a newbie. I just wasted a $10 strip of molding because I couldn't figure out how the heck to do this! You're my saving grace today ❤️ ❤️❤️
Leah, I swear I love everything about you, your encouragement, your enthusiasm, you’re expertise. Thank you for empowering me. Why can’t I do this? I can!!!
Leah, you are great! You saved me from a huge mistake with my crown molding! I was about to try making my cuts with a coping saw! Thanks for the detailed instructions. I cut them by handsaw and your instruction to flip it over for the cuts was perfect! God bless you!
Thank God for your videos! I've been doing a lot of this type of thing for the first time and your explanations have made EVERyTHING so much easier for me. Thank you for making all of these great videos.
As always another great how to video explaining in easy steps. Have crown moulding to fit to kitchen cupboards and this has made the task less daunting. Thanks very much!
Wished i had watched this video about an hour ago. Now it's back to the big box store for more molding to replace the stuff I messed up. Thanks Leah another excellent lesson
Thank you, combined with other videos this has given me so much direction. You have answered so many questions, the other videos left me asking. When you said from beginners, you meant it. So many people forget to start from the ABC of a skill. KUDOS.
I do a lot of finish work and the main obstacle for me has been crown molding, I have studied multiple videos and I have to say your video has helped more than any other I have watched, you walk through the process in a way that anybody can understand and learn to do better. Anyways Thankyou for posting this.
Leah... you have seriously become my DIY Home Improvement go to... Thank you so much for your videos. They are amazing!! I am such a visual learner and you not only show how but you show the logic behind it. I'm putting molding above some IKEA bookshelves that I'm trying to spruce up and turn into built ins. This video did the trick!
Watched a bazillion videos trying to understand WHY the moulding has to flipped upside-down. None of them managed to explain this in an understandable way or simply ignored the fact. The sequence starting at 3:00 does it perfectly!
Wonderful ! God bless you, I tried to figure this out alone and wasted quite a bit of materials. I became very good after watching you videos. Im going to crown Mold my house now haha !
Thank you!!! I too watched what seemed like a million video's and wasted a lot of wood trying to figure out the miter cut. After watching your video I was able to do the miter cut the first time.....let's just say there was happy dancing going on!!!
Thank you for making this video you have simplified this hard to do cut. I love your videos keep making them it's nice to see a woman doing woodworking keep up the good work
Leah, I can not thank you enough for all your tutorials! I have learned so much from your very specific easily understandable directions. Again, thank you!
You're a saving grace. I had the cosine mathematics computations, the instructions on the compound mitre saw, the special angle measure tool that had the mitre tables listed on it, the help of special wizards, but nothing helped... but you did. Thank you for making it so visual and obvious and uncomplicated. Please come over for dinner. Thanks.
I have 4 6x6 gate posts that i originally wanted to install post caps on. They are either hard to find, expensive, or shoddy. I'm improvising and going to install some crown moulding on top. I've done this before, and it was a mess.....i wish i'd had your video then. I didn't, but I do now, and I can't wait to get started. Great video! Thank you.
OH MY GOSH. No life story. No what's my why. No explanation about the origin of mitre cuts or the various tools to use. Just straight to the point AND in easy to follow and understand language in less than 6 minutes. I honestly can't thank you enough. 🙌🏾
This is the most perfect explanation about how to cut crown molding in thousands of videos on UA-cam, Finally I found this video thank you this is the best.
Fr
This lady knows how to teach. All the other videos start with "this is how you do it" but never go into sufficient detail why, and never explain all the different ways things can go wrong. Lea does all those things. Thank you
you're welcome, Bradley, and thanks, I appreciate your comments!
Of all the videos I watched, yours was the best because you SHOWED US why we are flipping the molding around.
When you marked the trim with a sharpie, slowly moved it to the miter saw, we could see the problem and when you flipped it around - the solution made sense.
I was using a small cove molding that had no top or bottom. It was an identical 3/4" on both edges. That was making it especially difficult for me to follow other instructions about turning it upside down, etc.
Once I watched your video and understood *why* - I was immediately able to configure my cuts. I subscribed to your channel right away THANK YOU for taking the time to make this video. 🙂
I’ve watched no less than 15 videos on “how to install crown molding “ and FINALLY one that makes sense and isn’t over complicated!!!
Thank you!
A few weeks ago I was so frustrated trying to learn this while doing some work on my kitchen that I gave up and decided to order pre cut corners that didn’t look good at all and I ended up wasting my money. Thanks god that I found your video and all of the sudden everything makes sense. Thanks a lot for your help.
Ma’am, I watched a lot of videos before I found yours and this was the one that did the trick. Extraordinary clear explanation. Thank you
I always find myself coming back to her channel for the best help! If I search something and she's listed, definitely choosing it. She needs a TV show and we'd binge watch like This Old House!
Thank you so much Leah, for your patient speaking explanations. Too many people offering tutorials forget not everyone knows even a fraction of what he/she knows. But, we want to know. No matter what the project is I am attempting to tackle, I always end up at one of your tutorials. No one else takes the time to use words and visuals to make your instructions understandable. Many videos leave me still scratching my head, because I learn visually, not just by words. Once I "see it," then I can insert the words, to complete the picture in my head (i.e. spring angle/resting against the fence). I then believe yes, I "can do this." 2 years ago, Bradley Jellerichs perfectly expressed my sentiment. You are a great teacher.
Thank you so much for saying this....it means a lot!
Spent one comical evening trying to figure out how to put up molding around a bookcase...and then watched your video and it all meant sense. Your specific language sets you apart from everyone else. Thank you!
Thank you Lisa. I am a 20 plus year roofing veteran and I was pulling my hair out trying to figure this out. Your explaination was perfect. It was so easy. Subbed. Thanks again.
You are an AMAZING teacher. Thank you SO much for showing us lowly DIYers how to gain competence. Truly appreciated!
Jane is hands down the best teacher on UA-cam!! Thank you Jane!!
Best simplest explanation of cutting crown molding I have seen!
I watched 4 other videos on how to cut a outside corner on crown molding, they all went too fast and even after watching the videos I was still unsure of how to do it. I wish I had watched yours first. This was by far the best explanation of how to cut crown molding. THANKS!!
The best and simplest way I’ve ever been taught, thank you so much for teaching where it’s crystal clear, greatly appreciated
I could NOT have done it without your patient explanation! I built in a bookcase floor to ceiling and the outside joint with the crown molding is the best part!
Leah, Kudos to you making corner crown molding cuts so easy! Love the tip about the "spring angle"and how crown molding doesn't just rest flush on the wall but rests on the ceiling AND the wall! And extremely important for a beginner/ DIYer! I was trying to practice cuts with paper and cardboard and couldn't figure out why it did not fit on the wall. Crown molding comes with a 45° angle that rest on the ceiling🥺
Thank you, Thank you, so much !!!!! I can't believe how much I have spent on crown molding because I didn't know how to cut it. This was so simple and you don't have to go through making a jig to cut the molding the right way. You made everything so easy and practical. This just cleared up everything I have been doing wrong so a BIG THANK YOU !!!!! 😃 You are AWESOME !!!!!!
I couldn't believe it! After watching so many videos on this subject, you have nailed it. I finally did it after watching your video. Thanks so much. I was about to give up and call a professional but now, not happening. I got a handle on it with your straight forward explanation. Again, thanks.
I watched plenty of videos before yours and after doing so I went to work!! Thank YOU!! You explained simply without going on and on and complicating things like many other videos. YOU ROCK!!
Thank you. I have a miter box and saw. I had to reverse my crown molding err turn it over and adjust the pegs but after trying cuts on a sample of crown molding I got it down. I gotta put 3 pieces on a linen closet and buying a saw or a contractor is out of the question for now. You’re easy to follow and understand. Outstanding !!
Leah, I am a construction technologist, and I am thrilled by exploring and finding out quicker and efficient ways to get the job done while delivering optimal quality. I must when it comes to instructional and getting procedures accurately you are right up there with all the top tier. Thanks a million keep on doing an exceptional job.
you're very welcome, and thanks for your kind comments!
Hi Leah, you are Amazing. I have been doing honeydew projects for over 45 years and you are still teaching me things. Your video on sawhorses just blew me away. So simple yet strong, stackable. I have been looking at sawhorse designs in books and all are too complicated. You have a very nice way of teaching, explaining everything so we understand what you are doing. Just watched crown molding video and again so simple. You are fantastic. Thank You, please don't stop. Mark
Hey Mark, thanks so much! And thanks for watching...we have no plans to stop making videos anytime soon...🙂
Just saved me a lot of headache, time, and money. So glad I watched this before I started cutting. Thank you!
Newbie here Ive been doing this work for a couple days now at my house and IDK if I may have molding dyslexia or what but damn, remembering both angles every time has been tough. TBH I dont think this video will help me improve but its certainly helped me feel better about how Ive been struggling. Thank you! That was clear and concise, and fast.
THANK YOU !!!!! You just made my wife’s birthday complete. After watching this video two times, I was able to tackle the job.
You made it sound so simple, thanks again !!!
You are my Hero!!!!! This video was perfect. I followed it exactly and it worked out perfectly. My first crown miter cuts were professional level. I watched a ton of videos and yours was by far the best and easiest to follow. Thank you!! Thank you!!
omg...that was a super easy video explanation. I watched it and went right out and did it. Came out perfect the first time! You rock! Thankyou!!
This is the best video I've ever watched on this topic. You actually make me feel confident. I'm going to cut my outside corner now!
Leah you ROCK!! My husband's and my brains nearly exploded trying to figure this out and we just barely stumbled our way through it...after wasting tons of wood and time. If only we had had this video then!! Thank you for tackling SUCH a confusing problem and for explaining it so clearly.
+Alexandra Gill Hi Alexandra, I appreciate your comments, because that is what I was trying to achieve...take a complicated process and simplify it for the layperson.
Hands down, best crown molding instruction video I've watched, and I've watched a lot of them lol
Leah! Thank you! I now feel confident that we can do this! I will probably re-watch the turning the moulding upside down part of this video before every cut to be sure I'm doing it right....
You are a Godsend! I've watched a dozen videos and jacked up a 8ft piece of moulding. Watched this then went and cut my pieces without a single issue! Thank you again!
Glad to be of service, Melanie.
One of the best instructional videos I have ever seen on cutting crown molding. I could not get my second piece of an outside corner cut correctly. My first piece was a scrap from a previous cut that happened to have the correct angle. Thanks
I rarely comment, but I wanted to say thank you Leah! Your videos have helped and taught me SO much. And you're excellent at anticipating areas of confusion and misunderstanding and explaining them! Keep it up!! You are truly appreciated!!
Thank you, Ramone, I appreciate it!!
I couldn't ever wrap my mind around this until I saw you video!!! I going in coach.......
Leah, you explained this better than anyone I have watched. Thank You!
Oh my goodness!! 5 videos and I find someone who can do the cut with one try. Finally!! I knew it could be done but I just couldn’t focus due to a 4 day migraine. Thank you!!!
I've never had to do angles etc in my old job, yet my new job I had to cut and join some crown moulding (8 metres up a ladder!) and had MAJOR dramas trying to work out why I was doing it wrong (lucky I had a lot of spare moulding!) I came here to learn more, and other videos make sense ofcourse, but its the way you explain it made it sink in to me. Thanks Leah
Dave from the UK, like most comments, at last you've broken the voodoo for cutting mitres. Someone, who not only knows how to do it, but knows how to pass on the knowledge.
Keep up the good work girl, to you wood be teachers watch and learn.
I am soooooo glad you made this video!!!! Most comprehensive thing I've seen for a newbie. I just wasted a $10 strip of molding because I couldn't figure out how the heck to do this! You're my saving grace today ❤️ ❤️❤️
Glad to help
Beautifully explained. Thank you!!! Your lovely spirit shines through. Bless you!
Leah, I swear I love everything about you, your encouragement, your enthusiasm, you’re expertise. Thank you for empowering me. Why can’t I do this? I can!!!
yeah! 👍🙂
I wanted to add crown molding to the top of a hall tree I was building. This explained it perfectly! Thank you
Leah,I love how you simplify things. Your a great teacher and I love your positive energy! ❤
Probably the easiest explanation of any I’ve seen, excellent job, thank you.
Wonderful break down and explanation! As a DIY-er stretching her comfort zone, thank you so much!!!
I never comment but this was absolutely best tutorial I have ever seen
Best best best crown molding tutorial yet. Going to surprise my hubby by finishing out built ins befor he gets home!
That's great, Jennifer, good luck with your project!
Hello this is Derick. Thanks so much for this. You make it so so easy to understand. I have learned a lot from you.
Leah, you are great! You saved me from a huge mistake with my crown molding! I was about to try making my cuts with a coping saw! Thanks for the detailed instructions. I cut them by handsaw and your instruction to flip it over for the cuts was perfect! God bless you!
you're welcome, Gary, and thanks! I'm glad to have been of help. :)
Thank God for your videos! I've been doing a lot of this type of thing for the first time and your explanations have made EVERyTHING so much easier for me. Thank you for making all of these great videos.
As always another great how to video explaining in easy steps. Have crown moulding to fit to kitchen cupboards and this has made the task less daunting. Thanks very much!
you're very welcome!
Thank you for this informative video. Everyone says upside down and backwards but you took the time to explain the reason.
Brilliant, you have done it again. No one explains things better than you do.
+Linda Marsden thank you, Linda, that is very nice of you to say!
Seriously, the best explanation of this I have ever seen.
🙂
Wish I saw your video last weekend. Would have saved me 1 hour and 4 board feet of wasted material. Great video !
Well done! Leah--you have a very clear and easy way about you. You are an excellent teacher!
Fantastic vid!! Great teaching! Crown moulding is an absolute nightmare lol but watch this a couple times and it becomes SO much simpler!!
Thank you so much for your help! I'm a fairly decent DIYer, but I always always have butchered crown molding! This tutorial helped tremendously!
You made it look so easy - out to the garage to cut my outside corner on my wall cabinets!!! Thanks!
Wished i had watched this video about an hour ago. Now it's back to the big box store for more molding to replace the stuff I messed up. Thanks Leah another excellent lesson
you're welcome, Tom!
I used your steps and made perfect corners. this was a great help. I did have to watch a few times to make sure I had it down.
Keep up the hints!
You did it...way to go!
Thank you for this video! Because of you my boss let me try my hand at crown molding yesterday and was really impressed!
Been working on my cuts for an hour and took me 2 seconds after watching the video. Awesome tutorial!
Thanks to Leah for this informative video. This had confounded me to no end until seeing this video. Now I’m prepared.
Thank you, combined with other videos this has given me so much direction. You have answered so many questions, the other videos left me asking. When you said from beginners, you meant it. So many people forget to start from the ABC of a skill. KUDOS.
I do a lot of finish work and the main obstacle for me has been crown molding, I have studied multiple videos and I have to say your video has helped more than any other I have watched, you walk through the process in a way that anybody can understand and learn to do better. Anyways Thankyou for posting this.
thank you, tons of videos on this but yours was easiest to follow. been scratching my head all day then watched this and got it first try
Love your patience and encouragement! I hope that you're doing well.
Reference line was everything I needed to simplify the solution! Thank you❤
LEAH IS THE BEST OF THE BEST IN UA-cam..!❤️❤️❤️
this whole channel is just great
+Bambiraptor0 thank you!
Leah... you have seriously become my DIY Home Improvement go to... Thank you so much for your videos. They are amazing!! I am such a visual learner and you not only show how but you show the logic behind it. I'm putting molding above some IKEA bookshelves that I'm trying to spruce up and turn into built ins. This video did the trick!
+Tony Heston you're very welcome, Tony, so glad to be of help!
Leah, Thank you for this informational video and it really helps to show each step and the issues to be aware of for each cut.
I was about to cry. Thank you so much for the explanation.
Best video out there for outside crown moulding corner cuts !!!
Watched a bazillion videos trying to understand WHY the moulding has to flipped upside-down. None of them managed to explain this in an understandable way or simply ignored the fact. The sequence starting at 3:00 does it perfectly!
I now understand why you flip crown moulding to make your cut . Thank you so much
Finally, someone to teach me how to cut an outside corner in language that I can understand! GOT IT! THanks
you're very welcome, glad it was helpful!
Wonderful ! God bless you, I tried to figure this out alone and wasted quite a bit of materials. I became very good after watching you videos. Im going to crown Mold my house now haha !
Literally the best at diy on UA-cam.
Thank you!!! I too watched what seemed like a million video's and wasted a lot of wood trying to figure out the miter cut. After watching your video I was able to do the miter cut the first time.....let's just say there was happy dancing going on!!!
that's awesome, Bill...you did it!
This was an amazing demonstration! You helped me tackle a huge project this weekend. Worked like a charm. You get a virtual fist bump 👊 . Many thanks!
I think you may have logically convinced me I can do this. I will find out tomorrow morning. Thanks!
Did u do it
Did you ??
🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️
Easy simple explanation. I always wondered why you had to turn it upside down. Thanks!
I'm nervous about cutting my pieces but your video has given me hope! Thank you lol
little practice with a scrap piece of molding ;)
Thank you for making this video you have simplified this hard to do cut. I love your videos keep making them it's nice to see a woman doing woodworking keep up the good work
+mike gardiner you're welcome, Mike, and thank you for your comments, I appreciate it.
What an absolute great video. Seriously, one of the best explanation on how to do this.
Leah, I can not thank you enough for all your tutorials! I have learned so much from your very specific easily understandable directions. Again, thank you!
you're very welcome, Teresa!
Thank you so much! Love the way you speak - something about it makes this sound so clear and easy to understand. Subbed
The best explanation yet. I always messed up crown. Thank you Leah
You're a saving grace. I had the cosine mathematics computations, the instructions on the compound mitre saw, the special angle measure tool that had the mitre tables listed on it, the help of special wizards, but nothing helped... but you did. Thank you for making it so visual and obvious and uncomplicated. Please come over for dinner. Thanks.
you're welcome, Greg, I"m glad to be of help! 🙂
This home slice handyman needs this trick and was so perplexed!!! Saved the day good woman!
Leah, I like your simple yet very logical instructions.
You are so amazing! Thank u for the way u explain things. Makes it so easy to understand. God bless u ALWAYS
I have 4 6x6 gate posts that i originally wanted to install post caps on. They are either hard to find, expensive, or shoddy. I'm improvising and going to install some crown moulding on top. I've done this before, and it was a mess.....i wish i'd had your video then. I didn't, but I do now, and I can't wait to get started. Great video! Thank you.
I like how you simplify things. Love your videos and appreciate you.
So simple. Thank you. This technique is amazing. WS getting frustrated until I came across your video. Will subscribed.
Love your teachings, you are a natural teacher. Thank you very much