such an awesoem video very relaxxing and enjoyable can't wait to see the sequal ;) and when you make it big I can brag abnout being the fourth subscriber of yours
Just like you I keep trying to distract myself with other cases, particularly some of the ones you've mentioned, but then youtube decides to show me yet another video of the formd t1. I guess my bank account is just cooked lol
couple of things: 1) Did you use any standoffs for the pci-e riser mount to give the mobo more spacing behind the back? Also that back plate on the mobo didnt need to come off, it looks to be very low profile, even in line with the cpu backplate 2) did you find that the mobo rear plate fouled against the back of the gpu? 3) did you consider to build in 3 slot mode instead of 3.25 mode? 4) apparently running an all air-cooled build is better with the t1 for the x3d, when you use a radiator, it basically creates a hot pocket of air which will increase the temp of the gpu.
1) Yes, the 5mm standoffs. The screws I used were the flat heads because they could actually reach the standoffs. 2) No. 3) I tried 3 slot mode, the side panel was bulging. 4) You could be correct. But for the main part I don’t run anything intense on the GPU so the temps usually stay low, 4090/80 both idle fans for low usage scenarios.
So i have a 4090 build already, im wanting to 4080 build with maybe an intel i7? I was looking at the pro art 4080 as it's one of the smallest. Any help would be appreciated.
Are you liking this configuration? I'm moving from the a4h2o case to the formd t1 v2 black, my specs are i7 13700k 4080 FE b760i 32gb ram sf750 corsair 2tb ssd fractual lumen v2 aio Do you think leaving a4h2o was a good choice? I will build it next Monday.
Plain and simple ITX case with no RGB is definitely my plan for my next build
One remark push is always much better than pull. I would suggest to put fans below the radiator
Top tier video, the way you described the mid-tower waste of space is exactly how i feel about those types of gaming pcs as well.
3:30 boi that's wholesome af go hug your moms
The memory training on AM5 with DDR5 is nerve racking on first boot…
Great video! I wasn't too sure how well the Vida was going to fit in this case, but this helped and then some.
Such a well edited, relaxing and interesting video, you deserve more subs...
Glad you enjoyed!
Nice build! I bet you are smiling about that choice to go for the 7800x3d over the Intel cpu now as well.
Same type of build, but with the Dan A4 H20 to accomodate 2x T30 fans at the top. Loving the look with the FE4080 ... enjoy !
I had that case, and really liked it, except for the lack of dust filtration. The holes in the mesh are great for air, but terrible at stopping dust.
Thank You!
facts he is a good video maker
I appreciate it man!
0:23 Bro nahhhh, you can't do yourself dirty like that 💀💀💀
this man is a menace, he proceeded to show his younger brother, mother and himself in a single video without being scared of the internet
3:30 "MOOOOM! Not now!!!"
such an awesoem video very relaxxing and enjoyable can't wait to see the sequal ;)
and when you make it big I can brag abnout being the fourth subscriber of yours
Please do!
Much love the finalmouse starlight 12 xD, PS thnx for the amazing video
Nice build brother, certainly inspired me!
Nice build but, should go with push not pull.
Just like you I keep trying to distract myself with other cases, particularly some of the ones you've mentioned, but then youtube decides to show me yet another video of the formd t1.
I guess my bank account is just cooked lol
couple of things:
1) Did you use any standoffs for the pci-e riser mount to give the mobo more spacing behind the back? Also that back plate on the mobo didnt need to come off, it looks to be very low profile, even in line with the cpu backplate
2) did you find that the mobo rear plate fouled against the back of the gpu?
3) did you consider to build in 3 slot mode instead of 3.25 mode?
4) apparently running an all air-cooled build is better with the t1 for the x3d, when you use a radiator, it basically creates a hot pocket of air which will increase the temp of the gpu.
1) Yes, the 5mm standoffs. The screws I used were the flat heads because they could actually reach the standoffs.
2) No.
3) I tried 3 slot mode, the side panel was bulging.
4) You could be correct. But for the main part I don’t run anything intense on the GPU so the temps usually stay low, 4090/80 both idle fans for low usage scenarios.
Hi, may I know how much temp VIDA Slim can handle 7800x3D with this FormD T1 case? planing to get one of those if can get cooler below
hello, you think that 7800x3d is good for streaming and edit simple videos? what is your experience?
I love them small but not to small like my meshy with my 4090fe I’ve been thinking of the formd
CH 160 has entered the chat 😂
Why did you removed the backplate off the motherboard??
keep up with these great videos... i am a new subscriber ....😊
So i have a 4090 build already, im wanting to 4080 build with maybe an intel i7? I was looking at the pro art 4080 as it's one of the smallest.
Any help would be appreciated.
How did you connect the GPU to the power supply? I can't seem to spot the wire in the video. Did you use a custom cable?
17:24
lol @ 3:32
what the heck is in that bag lol
bread@@Zombie101
does the formd t1 v2 support aio with standard size fans?
Are you liking this configuration?
I'm moving from the a4h2o case to the formd t1 v2 black,
my specs are
i7 13700k
4080 FE
b760i
32gb ram
sf750 corsair
2tb ssd
fractual lumen v2 aio
Do you think leaving a4h2o was a good choice?
I will build it next Monday.
how did it go? are you aio cooling the cpu?
fractual lumen v2@@Zombie101
Somehow this still won't be able to play Cities Skylines 2
Could you please, post the links of the parts ?
Life’s been busy give 1-2 days I’ll post it.
@@yaredaberra6142 been 4 big busy months
Hi there, what are the system specs and what are your temps?
Specs are in the description. Temps range from 60-85c when gaming (CPU). 4080 goes 60c max, the fans for the gpu are idle most of the time.
@@yaredaberra6142 did you undervolt the gpu?
@@Sabakoe737 No, don’t undervolt the RTX 40 series GPU’s. They are VERY janky, especially on Afterburner.
@@yaredaberra6142 what do you mean with verry janky?
But did you also undervolt the cpu? Because then you get lower temps
@@Sabakoe737 I tried to, but the GPU constantly exceeded the power limit I set.
perfect