I’ve been doing builds for decades now and this is probably the best build experience I’ve had in a case. A lot of great engineering went into this one.
@@anonymoose2474 It only has the three front fans stock and they run off of a standard motherboard connector for the rgb. My issue with them is that to get the matching fans, they require to be ran off of a USB hub. Airflow is absolutely great. It has the mounting points for 2 140mm on the bottom and up to 3 120mm on the top. I have mine set up 3 120mm front intake, 2 140mm bottom intake, 2 140mm top exhaust, and one 120mm exhaust on the rear.
Tried this case myself, couple things to know: 1. The airflow for GPU really is better due to the angle of the side fans. 2. A lot of internal clearance is sacrificed for the side fans' angle, example: top radiator is hard to mount, and doesn't support performance AIOs with thicker radiators. 3. Bottom support for fans is... interesting...
@@danijelb.3384 The biggest thing they can effect is positive case pressure (based on smoke tests, but that can of course be changed by adjusting intake/outtake fan curves). With all fan slots filled and all fans running at 100% the case has excellent positive pressure.
I've just actually done a build in one of these two weeks ago.. Very easy to work with for cable management.. So much Airflow...And it looks great if you have it at a Angle/offset display so you get to see all the fans ect... I'd recommend good quality fan's,it really makes the case alive if you can control your lighting speed/brightness Actually one of the best cases I've built in a while, especially for the money!!
@@idkconflict No there's other hubs out there..I've mentioned a idea in a post below for budget stretched. If you're ok not changing fan colours you can just get one colour and geta cheap connection that goes to your motherboard...1 connection to mono one end and you can have 5 fan's connected the other.. cost about £3
I have never built a pc before and don’t even have parts yet to build a pc right now but you are a joy to watch and inspire me to build my own! Keep bringing the great content!
Got this case for an upcoming build, build quality is superb. Cable management is a solid 8/10. Very similar to the Y60 but offers more functionality which I’m all for.
@@l5-cs. I got a y60 box sitting under my desk and all the parts ontop. I’m happy with the case choice just so many I want to build in. But I’ve had my eye on Hyte for a while now
I just the other day purchased a HYTE Y60 case and was looking for video reviews and found your channel and have been loving the vids! Keep up the great work!
wouldn't an exhaust fan at the back, and the top (since there is no AIO) benefit in helping to direct the hot air out of the system and improve the overall air flow? Most H6 builds I've seen have at least one fan at the back and some at the top to move more air in and out.
OMG, i want this case, BUT after your review im thinking... This gap at top of the motherboard, wtf? Why PSU is mounted SO HIGH? 😮 Plus all heat from MB back will heat it up... I dont care E-atx motherboards, so M-ATX will fit very well! The biggest minus for me in this case are NO TINTED WINDOWS (like Corsair 4000/5000D Airflow haves...) 😢, i want tint, really dark like 4000D... 😢
I’m not a fan at all, this style of case looks out of place, it’s like looking into an oddly shaped fish tank and takes up far too much space! I get it, innovation is great, but come on.. it looks ridiculous.
NZXT write only elite cases have access and are usable with CAM software. Now i see all Flow cases do not have any Hub/controllers and i understand. Any help what to do to use CAM software for a "H- Flow case?
Im getting this case. Im just starting to worry about the fan set up. I will have the 3 intake fans 2 fans on the graphics card.. 2 fans on the phantom evo cooler..and the 1 exhaust fan on the power supply.. is this enough cooling? Or will it have negative pressure? I bought the pc part picker magnificent amd gaming/streaming build.. any info would be appreciated
@@_jiraffe_ I would say "inspired". When someone introduces us with something unique, others get "inspired". Its like Lian li's O11 dynamic. Lian li first launched it, but now you can find similar looking cases from other brands at different ranges. Even NZXT has one
Hi centric I just brought this case and the 7900 gre and the ryzen 7600x will I be ok using only 2 140mm on the bottom and nothing on the top or will I need fans on the top to ?
jumped in to this case from O11 dynamic and i had to remove io panel side fan of my Arctic 360mm aio, because it hits Steel legend MB heat sink. unless that it was a good case when install 2 bottom fans.
DDR5 5600Mhz only..... strange.... I just realize... Why this Air cooler been install like this ?? Why there is no fan on front and mid ?? Weird for me.
there is a fan in the middle, he just removed it during installation to access the screws. It looks like he as the fans set up in a Pull config instead of push also.
@@Rosso87 I fully aware of it but he is using a pretty low memory ram so not sure why didn't try to fit one on front and second on mid. I wonder how much this config hit a performance of this cooler...
Yes the airflow on this is actually amazing. They’ve done thermals and smoke tests on airflow. The engineering behind this case is one of the best out there. Sooo he’s wrong about the airflow. They probably perfected this airflow. Tests on been done with negative, positive and neutral pressure. He’s wrong on that. You can do a high end build with a strix mobo and fits perfectly. I have a 4090 and a 14900kf. Mine is a beast. Who ever is starting to buy a pc use this case.
I did a gut swap in this case coming from a hyte y40, loved the case, my 2 big negatives is, I had to gently yet firmly push my lian li uni fans into the where the 3 pre installed fans are at, they barely kinda fit, also th bottom 140s, my lian li uni fans didnt fit there because of the notch at the front and back ends, so i had to use some nzxt 140s i had. 7/10 case for the problems i encountered, but still loving it.
You sure ? My lian li 140s fit perfectly. Are you talking about the connecting lugs ? They can be removed by twisting them off. Like I said mine fit absolutely perfectly
@Kentish9494 I have the uni SL INF 140s idk if the spacing is different but the connector part where you daisy chain gets in the way for me with that lip that hangs. And again the 120s are a very very tight fit in the back
@bobby7975 I have the exact same but the V2s so I don't know if they're different but like I said they connect to each other and slot in that bottom slot perfectly. Maybe give them a go ?
I'd be interested in a build that is souly focused on cooling and performance, would be interesting to play games in 4k absolute max settings with really good thermals.
Bought this case at launch in white and it is a stellar case. I have a standard ATX motherboard and the fit is perfect and I think the motherboard you used is E-ATX so a pretty big overhand that no doubt will disrupt some of the airflow from the side fans which are excellent. No issues on the bottom fans as I stuck some Corsairs 140's that I had and it fit my Corsair AIO with the Phanteks T-30's which are thicker fans...Easy to build in, cable management was easy and cooling is great....so is the price!
Ok glad. I was not the only one. Those fans were a nightmare to figure out, so many freaking wires for 3 fans. It was rediculous. Need a better system. Outside of that. I love the case. My last case was a full size tower that weighted in a good 50 pounds before anything was added(feels like it)
i have the same cpu cooler however mine is the ak620 zero dark, my question is did i install my cooler incorrectly because i have one fan near the ram and not facing the rear of the pc case.
Can anyone advise me on how to upgrade my PC I built in 2020? 2080 Super Ryzen 9 3900x 32 GB RGB Ram Nzxt AIO water cooler Aurorus b550 master motherboard NVMe Samsung SSD 970 SCSI Disk Device (932GB) Samsung SSD 970 EVO Plus 250 GB Lian Li o11 Dynamic Case 850 watt golf plus
This is similar my build. 7600x 7800xt red devil LE Same ram but 6000mhz 980pro MSI motar b650m liquid freezer II NZXT H9 flow Somehow my build is faster in gaming 😆 (I would have a 7800x3d but I am waiting for the next drop of AM5 "8800x3d")
i know this might sound stupid but what is the diff between aio and traditional air coolers? like there are some really good ones by deepcool and other brands I'm not knowledgable on this so yah any help would be dope
I wish NZXT had INCLUDED 3 of there duo ARGB fans, or some reverse fans and a controller at no extra cost! It would have made this case much better! Case company's should really take note of what Montech is doing, just look at there latest King 95 pro!!!
I like the sticker under the plastic and I leave it on. Case needs 120 mm fan holes for the bottom fans and Grommets over all the open holes. Also like the I/o on the bottom to use on desktop. Keep the Cheap fans and make it $89.00.
Hello there, how were you able to be as knowledgeable as you in the pc world? As someone who is starting out I'd like to be able to know more without going to the edges of the internet.
Bummed to see not much room for radiator set up on front. Big thing I was excited about with this case as i prefer sending heat out the top and don’t wanna run aio lines from the bottom of the case to the cpu on top lol
I have an Aorus B550 Elite AX V2 board with 2 sticks of Corsair Vengeance LPX RAM. I want to top-mount an Arctic Liquid Freezer II 360mm inside the H6 Flow case. This cooler has a very thick radiator (38mm). Will the fans and radiator hit my board and RAM sticks?
i have ryzen 7700 and after running cinebench ig goes straight to 70 degrees? its cooled by corsair aio, how is possible that yours got to 57 only? its great temps?
I am going to build my pc in the h6 flow I like it a lot do you might have a good gpu to pair with r5 7600x amd or nvidea new or used or you could give me one
I literally just did a white H6 Flow build a couple hours ago lol, I love it, just a heads up tho Lian Li Uni SL-Infinity 140s don’t fit on the bottom, and you’ll have to take the front glass panel off to install a 360mm AIO
@@danijelb.3384 I went Lian Li but I’m about to get nzxt fans instead, the lian li 140s are too bulky for the bottom spots and won’t fit, I do have 3 that I’ll keep on my AIO but other than I think going nzxt with a nzxt case will be the better option
I have build one with 2x 140 fans at the bottom and a 360 Kraken Elite on top in combination with the 3 120 in front. Getting very nice temperatures on the cpu as well as gpu. Very easy cablemanagement to.
Question: i plan on upgrading to a new motherboard soon, will i have to boot windows again in the bios, and if i do, can i just reuse my current storage devices that already have windows files on it or will i have to overwrite the files when the bios is put in
I’ve been doing builds for decades now and this is probably the best build experience I’ve had in a case. A lot of great engineering went into this one.
I case swapped my build last night and was impressed about how far the case comes apart. It really is great.
How would you rate the airflow and stock fans on it?
@@justevil100same question for you
@@anonymoose2474 It only has the three front fans stock and they run off of a standard motherboard connector for the rgb. My issue with them is that to get the matching fans, they require to be ran off of a USB hub. Airflow is absolutely great. It has the mounting points for 2 140mm on the bottom and up to 3 120mm on the top. I have mine set up 3 120mm front intake, 2 140mm bottom intake, 2 140mm top exhaust, and one 120mm exhaust on the rear.
@@justevil100 yeah the difficulty of connecting fans with this case seems incredibly high for no reason. I'm split between this and the phanteks nv5
6:46 yes i'm immature, yes this had me rolling on the floor
They was definitely trying to make some money off extra old fans they had in the back 😂
Tried this case myself, couple things to know:
1. The airflow for GPU really is better due to the angle of the side fans.
2. A lot of internal clearance is sacrificed for the side fans' angle, example: top radiator is hard to mount, and doesn't support performance AIOs with thicker radiators.
3. Bottom support for fans is... interesting...
could i mount a deepcool ls720 WH on the top?
The bottom fans seem to make no difference.
@@danijelb.3384 The biggest thing they can effect is positive case pressure (based on smoke tests, but that can of course be changed by adjusting intake/outtake fan curves). With all fan slots filled and all fans running at 100% the case has excellent positive pressure.
Is it possible to insert a 60mm thick radiator + fans on top or in front?
@@singwolf.yes, if not, try to use silent wings pro 4 with removable corners
I've just actually done a build in one of these two weeks ago.. Very easy to work with for cable management.. So much Airflow...And it looks great if you have it at a Angle/offset display so you get to see all the fans ect...
I'd recommend good quality fan's,it really makes the case alive if you can control your lighting speed/brightness
Actually one of the best cases I've built in a while, especially for the money!!
is the nzxt hub necessary
which fans would you recommend to fill up the case?
@@idkconflict No there's other hubs out there..I've mentioned a idea in a post below for budget stretched.
If you're ok not changing fan colours you can just get one colour and geta cheap connection that goes to your motherboard...1 connection to mono one end and you can have 5 fan's connected the other.. cost about £3
I have never built a pc before and don’t even have parts yet to build a pc right now but you are a joy to watch and inspire me to build my own! Keep bringing the great content!
Got this case for an upcoming build, build quality is superb. Cable management is a solid 8/10. Very similar to the Y60 but offers more functionality which I’m all for.
which mainboard and cpu coooling and which fans do you have? I dont know what to buy
I really have to stop looking at case reviews considering I just got my case in haha
me too, i just finished my build with an h7 and now im pissed off i didn't get the h6
@@l5-cs. I got a y60 box sitting under my desk and all the parts ontop. I’m happy with the case choice just so many I want to build in. But I’ve had my eye on Hyte for a while now
I just the other day purchased a HYTE Y60 case and was looking for video reviews and found your channel and have been loving the vids! Keep up the great work!
I feel like the fart was a very important part of this build.
Just purchased a black non RGB one and swapped the fans out for Lian Li ones. Looks awesome so happy with it
so you can buy the non rbg and you can just put different rgb fans, because ill be adding 120 duo fans on them because the defult rbg are ass
@apple2012convas yes absolutely and I flogged the ones that come with it on ebay for a few quid
i did the exact same thing and i'm so stoked with how it came out!!
Mayhaps wanna remove the plastic before putting the pc in the case. Static electricity is kinda…DEATH 👁️👄👁️
wouldn't an exhaust fan at the back, and the top (since there is no AIO) benefit in helping to direct the hot air out of the system and improve the overall air flow? Most H6 builds I've seen have at least one fan at the back and some at the top to move more air in and out.
OMG, i want this case, BUT after your review im thinking... This gap at top of the motherboard, wtf? Why PSU is mounted SO HIGH? 😮 Plus all heat from MB back will heat it up... I dont care E-atx motherboards, so M-ATX will fit very well! The biggest minus for me in this case are NO TINTED WINDOWS (like Corsair 4000/5000D Airflow haves...) 😢, i want tint, really dark like 4000D... 😢
I’m not a fan at all, this style of case looks out of place, it’s like looking into an oddly shaped fish tank and takes up far too much space! I get it, innovation is great, but come on.. it looks ridiculous.
4:44 KMT, paying extra for the RGB version makes no sense. Just do the regular ones and if you feel to then upgrade to more premium RGB.
Damn 6 seconds ago what a coincidence
It's 2023, why the hell do we need 800 cables for our fans? Other companies have figured it out. Who tf is buying these still?
1stt
Why aren’t people doing a 7800x3d and 7800xt build😢. Still waiting to see how that build performs
the cpu heatsink is set up WRONG.
NZXT write only elite cases have access and are usable with CAM software. Now i see all Flow cases do not have any Hub/controllers and i understand. Any help what to do to use CAM software for a "H- Flow case?
i have a i5 12400f and intel arc a750 and 32gb of ram, which graphics card should i upgrade to, Thanks
i would go for the rtx 3060
@@austinplayz3115 ok thanks
I’m not too well versed in pc building, but wouldn’t he have even better thermals if he had any out take fans instead of just in take fans
Im getting this case. Im just starting to worry about the fan set up. I will have the 3 intake fans 2 fans on the graphics card.. 2 fans on the phantom evo cooler..and the 1 exhaust fan on the power supply.. is this enough cooling? Or will it have negative pressure? I bought the pc part picker magnificent amd gaming/streaming build.. any info would be appreciated
NZXT : Can I copy your homework?
Hyte : Yeah, sure but make sure you make it look a little different.
To be fair I thought the same at first, but it takes an otherwise useless piece of glass and gives it functionality.
Why do people think every dual chamber is a copy of another dual chamber while every "normal" case look almost identical?
@@_jiraffe_ I would say "inspired". When someone introduces us with something unique, others get "inspired". Its like Lian li's O11 dynamic. Lian li first launched it, but now you can find similar looking cases from other brands at different ranges. Even NZXT has one
Hi centric I just brought this case and the 7900 gre and the ryzen 7600x will I be ok using only 2 140mm on the bottom and nothing on the top or will I need fans on the top to ?
jumped in to this case from O11 dynamic and i had to remove io panel side fan of my Arctic 360mm aio, because it hits Steel legend MB heat sink. unless that it was a good case when install 2 bottom fans.
DDR5 5600Mhz only..... strange.... I just realize... Why this Air cooler been install like this ?? Why there is no fan on front and mid ?? Weird for me.
there is a fan in the middle, he just removed it during installation to access the screws. It looks like he as the fans set up in a Pull config instead of push also.
@@Rosso87 I fully aware of it but he is using a pretty low memory ram so not sure why didn't try to fit one on front and second on mid. I wonder how much this config hit a performance of this cooler...
Please show more than one game in these build videos. Would like to see how it performs in more than just Starfield
You used an eATX MB, hence the hangover. I'm going to try an mATX in it, just for funsies and cheapies.
I think the CPU fan should face the other way
I was thinking the same but wasn’t too sure… can somebody confirm?
he corrected it you can see the deepcool logos go from top to bottom when he shows the motherboard installed
Too bad that this does not have 120mm fans on the bottom , i have to pay 90 bucks more to buy 2 corsair 140mm fans !!! i going to buy another one
Hello is the support for graphique card is including or optional ? Thanks
Where do you plug the preinstalled rgb fans into Ik it’s the motherboard but where does the rgb go into
Hey do I need a different type on psu to fit in a dual chamber case like the h6 flow
Yes the airflow on this is actually amazing. They’ve done thermals and smoke tests on airflow. The engineering behind this case is one of the best out there. Sooo he’s wrong about the airflow. They probably perfected this airflow. Tests on been done with negative, positive and neutral pressure. He’s wrong on that. You can do a high end build with a strix mobo and fits perfectly. I have a 4090 and a 14900kf. Mine is a beast. Who ever is starting to buy a pc use this case.
How good are the stock fans?
is it better to have atleast one exhaust fan with this setup? would it reduce dust accumulation?
your my favorite pc youtuber
Can you install like the Samsung sata ||| ssd ? Is there any support for the ssd?
Hi sorry for this but I am so poor and I can't get a laptop for study so if help me I will not forget that forever
I did a gut swap in this case coming from a hyte y40, loved the case, my 2 big negatives is, I had to gently yet firmly push my lian li uni fans into the where the 3 pre installed fans are at, they barely kinda fit, also th bottom 140s, my lian li uni fans didnt fit there because of the notch at the front and back ends, so i had to use some nzxt 140s i had. 7/10 case for the problems i encountered, but still loving it.
You sure ? My lian li 140s fit perfectly. Are you talking about the connecting lugs ? They can be removed by twisting them off. Like I said mine fit absolutely perfectly
@Kentish9494 I have the uni SL INF 140s idk if the spacing is different but the connector part where you daisy chain gets in the way for me with that lip that hangs. And again the 120s are a very very tight fit in the back
@bobby7975 I have the exact same but the V2s so I don't know if they're different but like I said they connect to each other and slot in that bottom slot perfectly. Maybe give them a go ?
They made table management so easy and yet you found a way to make it look horrible 😂 no offense
Can someone tell me how to change the color of the fans? I have the default one
i wonder what an H8 would look like
👀
Would love to get a free H6 flow case but that's just me wishing
i bought the white version of this case. i love it. the paint job is great and i really love the duel chamber aspect
I'd be interested in a build that is souly focused on cooling and performance, would be interesting to play games in 4k absolute max settings with really good thermals.
i aint doing my h9 flow like that, dawg is perfect
I just picked this case up on amazon for £85
Bought this case at launch in white and it is a stellar case. I have a standard ATX motherboard and the fit is perfect and I think the motherboard you used is E-ATX so a pretty big overhand that no doubt will disrupt some of the airflow from the side fans which are excellent. No issues on the bottom fans as I stuck some Corsairs 140's that I had and it fit my Corsair AIO with the Phanteks T-30's which are thicker fans...Easy to build in, cable management was easy and cooling is great....so is the price!
Can you put an AM4 motherboard for the H6 case?
@@priincexavi5504 Si, puedes poner Miniitx, Microatx y Atx.
I am seriously considering this case for a build, and have a question about it. How many 140mm fans can be attached to the top of the case?
2
I love this case, I bought this in white.
6:46 😂😂😂😂😂😂
I build pc's for decades now and the h6 flow is the absolute best case for me. It makes so much fun to build with it. Outstanding case! :)
How good are the stock fans?
@@anonymoose2474 I think the nzxt fans are pretty decent but I have no experience with these fans. I changed them with phanteks d30 :)
Ok glad. I was not the only one. Those fans were a nightmare to figure out, so many freaking wires for 3 fans. It was rediculous. Need a better system. Outside of that. I love the case. My last case was a full size tower that weighted in a good 50 pounds before anything was added(feels like it)
i have the same cpu cooler however mine is the ak620 zero dark, my question is did i install my cooler incorrectly because i have one fan near the ram and not facing the rear of the pc case.
Can anyone advise me on how to upgrade my PC I built in 2020?
2080 Super
Ryzen 9 3900x
32 GB RGB Ram
Nzxt AIO water cooler
Aurorus b550 master motherboard
NVMe Samsung SSD 970 SCSI Disk Device (932GB)
Samsung SSD 970 EVO Plus 250 GB
Lian Li o11 Dynamic Case
850 watt golf plus
oh boy....you make it look really good actually. this case has grown on me a abit since release..looks sleek.
This is similar my build.
7600x
7800xt red devil LE
Same ram but 6000mhz
980pro
MSI motar b650m
liquid freezer II
NZXT H9 flow
Somehow my build is faster in gaming 😆
(I would have a 7800x3d but I am waiting for the next drop of AM5 "8800x3d")
btw if someone plans to use corsair qx fan in that case youll need to cut hole everywhere to be able to plug your fans i just experience it lmao
i know this might sound stupid but what is the diff between aio and traditional air coolers? like there are some really good ones by deepcool and other brands I'm not knowledgable on this so yah any help would be dope
Gosh I want a hyte y60 but this don’t look that bad however, I prefer the hyte y60 aesthetic. GOSH
I wish NZXT had INCLUDED 3 of there duo ARGB fans, or some reverse fans and a controller at no extra cost! It would have made this case much better!
Case company's should really take note of what Montech is doing, just look at there latest King 95 pro!!!
Looks very nice hope they stop 🛑 making graphics cards so big or we will have to get a case size of a small garage lol
I like the sticker under the plastic and I leave it on. Case needs 120 mm fan holes for the bottom fans and Grommets over all the open holes. Also like the I/o on the bottom to use on desktop. Keep the Cheap fans and make it $89.00.
I’m brand new into PC gaming as of yesterday can anyone steer me with suggestions on games that show off graphics?
Hello there, how were you able to be as knowledgeable as you in the pc world? As someone who is starting out I'd like to be able to know more without going to the edges of the internet.
Bummed to see not much room for radiator set up on front. Big thing I was excited about with this case as i prefer sending heat out the top and don’t wanna run aio lines from the bottom of the case to the cpu on top lol
Flatulence,…..nice touch!!! Interesting way to punctuate the video. Well done m8.
Great build vid and very helpful for someone considering the Taichi Lite/H6 combo, thank you!
Thank but you are giving me a headache. Constantly moving. ADHD signs ?
The motherboard isn't on amazon fyi only on newegg which sucks cuz i have a gift card for amazon and i want this motherboard
Hey when you do get in the new Samsung ultra wide 240hz 49inch monitor in can you please do a detailed review
I have an Aorus B550 Elite AX V2 board with 2 sticks of Corsair Vengeance LPX RAM. I want to top-mount an Arctic Liquid Freezer II 360mm inside the H6 Flow case. This cooler has a very thick radiator (38mm). Will the fans and radiator hit my board and RAM sticks?
Did he not put the cpu cooler on backwards? I feel like the fans are blowing the air back into the case
i have ryzen 7700 and after running cinebench ig goes straight to 70 degrees? its cooled by corsair aio, how is possible that yours got to 57 only? its great temps?
Hi i thought too checked if the PNY GeForce RTX 4060 8GB Verto Dual Fan is good and work with an intel i7-12700?
I got 3 120mm fans where should i put them ? I have the same components except motherboard and cpu
can you show in depth like you plugging everything in. you cut everything out that we need 😢
I am going to build my pc in the h6 flow I like it a lot do you might have a good gpu to pair with r5 7600x amd or nvidea new or used or you could give me one
Is there any channels on the discord page,? Seem just UA-cam videos reminders
This is useful because my pc is next to my window so pc breaths cold air🗿🗿🗿
I’ve just watched this video again as I really enjoy the content… why can’t I like it again? Lol
Is be quiet! System Power 10 850 W 80+ Gold Certified ATX Power Supply
A good one ??
im using it right now for my first pc build, it is indeed nice and strangely beautiful 🥰
your temps test is bs lmao
Does that mean I can buy two separate fans for the bottom without a controller and buy the controller separately?
That's some wobbly table hehe. Nice Review btw, subscribed.
Imma stick with my H9 Flow baby!
I literally just did a white H6 Flow build a couple hours ago lol, I love it, just a heads up tho Lian Li Uni SL-Infinity 140s don’t fit on the bottom, and you’ll have to take the front glass panel off to install a 360mm AIO
Can you do two streams of the fans down the bottom? IE, use as normal fans and not interlock, the the connection goes to the back of the case ?
@@PcCentric i honestly didn’t think of that. I just tried it and after taking the interlock pegs off it slid in perfectly. You’re a genius! Lol
Did you build with nzxt side fans or all Lian Li. I’m thinking about replacing the three here and go all Lian Li
@@danijelb.3384 I went Lian Li but I’m about to get nzxt fans instead, the lian li 140s are too bulky for the bottom spots and won’t fit, I do have 3 that I’ll keep on my AIO but other than I think going nzxt with a nzxt case will be the better option
@@danijelb.3384did u do it? Do they fit cause they are thicker?
Can you test the aerocool dryft please it’s a £50 budget case that looks quite aesthetically pleasing
Obvious choice would be the toyota 2gr-fe as used by lotus to great success.
Make a video on best games & instalation & there sites bro we waiting lot do it please 🔥🔥
Had fun building in this case. Go with the cheaper version and this case looks much better in white.
I have build one with 2x 140 fans at the bottom and a 360 Kraken Elite on top in combination with the 3 120 in front. Getting very nice temperatures on the cpu as well as gpu. Very easy cablemanagement to.
Question: i plan on upgrading to a new motherboard soon, will i have to boot windows again in the bios, and if i do, can i just reuse my current storage devices that already have windows files on it or will i have to overwrite the files when the bios is put in
I wish they would have stayed the same design as H9 but just more compact. I still don't really. love that new angle.
Can you do a build with the Montech King 95, please??
I’m about to do my first build ever using this case