Well I just recieved mine from Amazon and finished installing. It literally took me 5 - 8 minutes too complete the install. Cost me $16.36.....I love me some UA-cam, saved me hundreds of dollars. Your Video is awesome!
Perfect. I damaged mine it had a crack, Lexus charging $500 for the center console not including labor I found the part for $125 on EBay and you just walked me through it successfully. Thank You Great Job!!!!
You literally saved me hundreds of dollars. Local Lexus dealer said it was going to be close to $400 to replace that small shifter slide cover. I put it off forever because I thought it must be a bear of a job. Yeah, nope. Took me literally 10 min and $23 for the part. Can't believe they would charge that much for a job so small. Thanks again.
Cigarette lighter was loose, wanted to find out if I needed a new assembly and really I just needed to tighten the cap underneath! Also thought might aswell clean the center shifter slider. Great video!
Thanks for posting this! Extremely helpful. I replaced mine today on my 07 IS250. Took ~20 minutes but was sure it would take longer b/c something would go wrong. But nothing did! Nice knowing what to expect before diving in.
Thanks bro! I’m new to the Lexus and IS family. I got a used salvage IS350 with high miles for fairly cheap. I dumped about 4500 into it to get all the missing, broken or upgraded parts. Man for a DD it’s so awesome! I was driving a 2002 WRX wagon and it was
Thanks , I just bought a used is350 and the guy I bought it from had the end of aux input cable stuck in a tight place when I was trying to replace the part . You video helped to loosen it and free it .
Hi, I've been looking for that video where you fix your brothers shifter grommet thing. Because I have the same problem and I'm trying to fix it but I can't seem to find the video. Much love from Miami 👍👍
Thanks. Keys in my centre console cup holder somehow fell into the small gap in the rear of the cup holder. This video just helped me resolve that issue😎
I had trouble removing the chrome trim around the shifter pattern, can you show me how? Also have residue from old cheap eBay wrap left on it - anything you'd recommend using to remove it without damaging the original wood finish ?
Any idea where I can buy the dashboard plastic clips for the trim parts? I have one broken and I dont know the exact part number so I can look for it. I drive a 2017 RX, but I am sure they use the same type of plastic clips for their dashboard parts. Iike your "thats what she said" jokes. Someone has been watching The Office too much lately LOL
Nice one! And so easy..... I was wondering about your opinion. Would you always prefer the facelift ISF or is the '08 to '10 your favorite? I would prefer the 2011, because of the LED daytime running lights ;)
Very helpful, i have the ugly brown wood trim in my 250 & would like to replace it to the more modern grey wood trim, my only struggle now will be removing the ash tray lid.
hey man i just have one question. i wanna change my plate because like you said i have that ugly wood plate and i want to change it to cf. but i don’t know what to do with the smoking slider at the front of the plate. do you know how to take it out?
Well I just recieved mine from Amazon and finished installing. It literally took me 5 - 8 minutes too complete the install. Cost me $16.36.....I love me some UA-cam, saved me hundreds of dollars. Your Video is awesome!
Perfect. I damaged mine it had a crack, Lexus charging $500 for the center console not including labor I found the part for $125 on EBay and you just walked me through it successfully. Thank You Great Job!!!!
You literally saved me hundreds of dollars. Local Lexus dealer said it was going to be close to $400 to replace that small shifter slide cover. I put it off forever because I thought it must be a bear of a job. Yeah, nope. Took me literally 10 min and $23 for the part. Can't believe they would charge that much for a job so small. Thanks again.
"Now you've just gotta ...... - That's what she said"
I'm dying of laughter. Clear, concise video - WITH a sense of humour. Niiiiiiiice.
Cigarette lighter was loose, wanted to find out if I needed a new assembly and really I just needed to tighten the cap underneath! Also thought might aswell clean the center shifter slider. Great video!
Thanks man! Perfectly explained, now I can actually try stuff without as much fear to damage my car
Thanks for posting this! Extremely helpful. I replaced mine today on my 07 IS250. Took ~20 minutes but was sure it would take longer b/c something would go wrong. But nothing did! Nice knowing what to expect before diving in.
Thanks bro! I’m new to the Lexus and IS family. I got a used salvage IS350 with high miles for fairly cheap. I dumped about 4500 into it to get all the missing, broken or upgraded parts. Man for a DD it’s so awesome! I was driving a 2002 WRX wagon and it was
This was very helpful. I need to replace my ashtray would you tell me how to do that?
Thanks , I just bought a used is350 and the guy I bought it from had the end of aux input cable stuck in a tight place when I was trying to replace the part . You video helped to loosen it and free it .
This helped a lot bro I switched from the boring wood trip on my is350 to the fsport silver trim all around
Excellent camera angle and instructions. Im so glad you werent holding the camera while trying to do this. Great vid man. Imma do this to mine
Do you have a link to replacing the plastic around the shift selector that you mentioned? Thanks
You’re a lifesaver mate retrieved my house key it fell down there through the little compartment
hi i have a lexus is 250 model 2007 can you show me how to change the clock pm to am and vice versa.Thanks
Liked and Subscribed just for the 'She said' parts 😂😂😂👌
Excellent tutorial! You made this so easy! Appreciate it! Was able to replace the plastic gear shift slide thing in under 5 minutes!
@Nancy - Ripper Mate. I'm here because of the same part. Thanks.
Just used this video to as a guide to insert the shifter part that broke on my is350 ! Great vid💯
Same LMFAO
Do you have the link to installing the gear shift cover?
How to fix the cover of the small console that won’t latch? Lexus es350 2020.
Hi, I've been looking for that video where you fix your brothers shifter grommet thing. Because I have the same problem and I'm trying to fix it but I can't seem to find the video. Much love from Miami 👍👍
Where did you find the shift Selector cover that you said was on eBay? Could you provide a link?
Is it covering or a factory thing ?
Hi,
Can you a video of how to remove a middle console for lx570 2016.
Thx
Thanks. Keys in my centre console cup holder somehow fell into the small gap in the rear of the cup holder. This video just helped me resolve that issue😎
Have you a photo from 12V charge adapter, how it looks unter console?
My 12 volt socket is loose and swings back and forth 😢
5:09 and 5:50 is what you're really here for
gotta run my amp bass knob down passenger floor panel so i can run under console to driver side!! thnx!!
How do you remove the whole center console ik the vedio old but I need help lol
Thanks for all the videos. I will be doing this soon to my ISF as well.
Thank you! hope you enjoy!
How do you get the ashtray cover off/out to wrap it ?
Man your videos are so good.......
Nah bro this video is so clutch good looks 😂💯💯💯
where did you get the small F logo you have on the radio?
PS - the part (Lexus GENUINE Shift Console Slide Cover OEM 35975-53020) was only $21 on amazon.
I had trouble removing the chrome trim around the shifter pattern, can you show me how? Also have residue from old cheap eBay wrap left on it - anything you'd recommend using to remove it without damaging the original wood finish ?
Honestly haven’t tried it yet.
Any idea where I can buy the dashboard plastic clips for the trim parts? I have one broken and I dont know the exact part number so I can look for it. I drive a 2017 RX, but I am sure they use the same type of plastic clips for their dashboard parts.
Iike your "thats what she said" jokes. Someone has been watching The Office too much lately LOL
Just replaced my ashtray. Thanks great video
How to remove your arm rest
Thanks I'm about to replace the broken shift cover in my wife's too
Good Job! I see some moron gave it a thumbs down. Probably cuz he couldn't figure it out lol
Super helpful video, Lam.
Thanks for taking the time to make these DIY short cuts.
Hows your IS running?
C T you’re welcome buddy. Hope you enjoyed them
Nice one! And so easy.....
I was wondering about your opinion. Would you always prefer the facelift ISF or is the '08 to '10 your favorite?
I would prefer the 2011, because of the LED daytime running lights ;)
LeX I would just upgrade the headlights to led. Bumper wide, is250:350 have more options
thanks mate this was hella easy to do with your help 👍🏻
Very helpful, i have the ugly brown wood trim in my 250 & would like to replace it to the more modern grey wood trim, my only struggle now will be removing the ash tray lid.
Keep it up Bro.... anything about getting rid of that old apple cable in the center console?????
Nice video 🤘Thankyou
Very helpful, this is also for 220d f-sport. Thank you
hey man i just have one question. i wanna change my plate because like you said i have that ugly wood plate and i want to change it to cf. but i don’t know what to do with the smoking slider at the front of the plate. do you know how to take it out?
Just what I needed to know. Muy bueno
That's not the center console that's the trim plate
I have a GS you could work on 😜
Thanks. This helped me alot.
My hero
That’s what she said😆
You just removed a top plate. Dislike
Do you have a link to replace the plastic around the shift selector you mentioned? Thank you